Hitron HCB-P71NNB6, HCB-P715NNPB6, HCB-P71NNPB6, HCB-P715NNB6 Instruction Manual

15-0 4-22

15-0 4-22

15-0 4-22

15-0 4-22

B

50303712

M.J .KWON

HCG(I)-P7xDxA32/NoBrand(Effio-A)

50303712

M.J. KWON

03-0 3-M14

Super High
Resolution

Day & Night

Camera

50303712

M.J. KWON

15-0 4-22

B

rev.B -5p:Va rious D etect ion Met hods 수정

Super High

Resolution

Day & Night

Camera

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

CAUTION : Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

WARNING : This is a Class A poduct. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures.

FCC INFORMATION : This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

2

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5.. Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s
instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

7. Only use attachments/accessories specified by the manufacturer.

8. Use only with the ca rt, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus combination to avoid
injury from tip-over.

9. CAUTION - THESE SERVICING IN STRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.

10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2
power source only.

11. Indoor use only.

EXPLANATION OF GRAPHICAL SYMBOLS

IMPORTANT SAFETY INSTRUCTIONS

3

LIMITATION OF LIABILITY

THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL
RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY
CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION
CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR NEW
EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH CHANGES

TABLE OF CONTENTS

CONNECTION & CONTENTS

6

INTRODUCTION

6

BASE INSTALLATION 7

MANU MAP 8

19

20

SPECIFICATIONS

4

DIMENSION

5

The camera provides a high-quality image using SONY Wide Dynamic 1/3”
Super-HADII 960H CCD and digital signal processing LSI chips.

1/3" Super-HADII 960H CCD
Super high-resolution of 750TV lines

Auto Electronic Shutter [1/50(60) ~ 1/100,000] and manual electronic shutter modes
[1/50(60) ~ 1/10,000]

0.1 lux(Colour), 0.01 lux(B/W), 0.001 lux(Slow-Shutter) @ F1.4 Sensitivity

Digital Noise Reduction- 2D,3D
Day & Night(Auto, Day, Night)

Sens-Up (~x256)
Various Detection Methods (zone detection, motion trace)

Intelligent scene recognition - Provide the best image automatically for every scene

Mechanical iris auto adjustment

Privacy Mask or Mosaic (MAX. 15 area /4-point polygonal/transparency)

E-Zoom
White pixel detection and compensation
Digital Effect-FLIP (H/V reverse, inverse)
Defog(Auto) - Detects foggy condition automatically and

provides high contrast picture

IR Optimizer

Coaxial communication (Coaxitron by Pelco)

RS-485 Remote camera control(Pelco-D)-Option
Support Line-Lock external synchronization (Line lock) -Option

Operates in 12VDC or 24VAC-Option

Digital Wide Dynamic Range-ATR-EX2

6

RS 485(+)

DN EXT-IN

AC24V/DC12V
AC24V/DC12V

RS 485 (-)

GRAY

BLACK GND

<Connector Option>

Select Day/Night mode using external equipment, by connecting control lines to the appropriate
terminals.

2-1. External Day/Night Control(Option)

DAY&NIGHT EXTERNAL INPUT
Switches the cameras D/N mode to either Day or Night based on the input status. Refer to the
diagram below. The cameras CNTL SIGNAL of D/N AUTO mode must be set to EXT2 for this
to function.

2-2. Alarm Out -Open Collector (5V/10mA)

2-4. Camera Control(Option)

BROWN : RS 485+
BLUE : RS 485-

2-3. Power Input Terminal

RED & WHITE : These terminals accept 24V AC or 12V DC. When using 12V DC it is
recommended to use a DC power supply that can support an inrush current of 0.55A

DAY&NIGHT INPUT

Gray

GND

Black

●

●

Close contact: NIGHT

Open contact: DAY

1. Lens : Allows a wide area to be monitored.

2. Color Lead Wire & Color Display Label

3. Video : BNC connector used to connect the camera to a monitor, swither, etc.

Motion detection signals are output through this port. Active state is Low(GND).
Normal : Open Collector, ALARM : Low(GND)

DC 12V Type