Hitron HCB-J5FD, HCB-K5FD, HCB-K9FD Instruction Manual

PRODUCTION RELEASE & REVISION
REV

DESCRIPT'N/BUYER

DWG No

PARTS No.

BY

CHK

DATE

A INITIAL ------------------- 50302575 A.K.HAN N.C.PARK 10-22-M9

105(+/-5)mm

148(+/-5)mm

11-09-M9

MANUAL LA BE L : 50 20 12 70

유주현

주임

INSTRUCTION MANUAL

WDR Super High Resolution

Day & Night Color Camera

TITLE

SIZE REV.

SCALE

MATERIAL

UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN MM.

- TOLERANCE
LABEL +/- 3
MANUAL +/- 5
GUIDE +/- 5

COLOR

DATE

DRAWN

CHKED

APPROVALS

PARTS LIST

DESCRIPTION/MATERIAL

ITEM QTY

A4

DO NOT SCALE

2

B

MANUAL INSTRUCTION

50302575

A.K.HAN

N.C.PARK

11-09-M9

NOTES

1.MODEL: HCB-J5FD_K5(9)FD/NOBRAND

2.MATERIAL: 모조지

3.COLOR: BLACK

4.SIZE: 105(+/-5)mm x 148(+/-5)mm

5.LABEL: 50201270(81mm x 24mm)

6.ANY CHANGE OR ALTERNATION MUST BE
APPROVED BY HITRON DESIGN TEAM.

WHITE

11-09-M9

3

W.S.CHOI

11-09-M9

BIND : STAPLES-2

B 내용변경 축소 ------------------- 50302575 A.K.HAN N.C.PARK 11-09-M9

재고폐기처분 즉시적용

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the m
anufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plu
g. A polarized plug has two blades with one wider than the other. A gro
unding type plug has two blades and a third grounding prong. The wid
e blade or the third prong are provided for your safety. If the provided p
lug does not fit into your outlet, consult an electrician for replacement o
f the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from th
e apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use cau
tion when moving the cart/apparatus combination to avoid injury from ti
p-over.

13. Unplug this apparatus during lightning storms or when unused for long
periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-su
pply cord or plug is damaged, liquid has been moisture, does not oper
ate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE B
Y QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RIS
K OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OT
HER THAN THAT CONTAINED IN THE OPERATING INSTRUCTION
S UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use Certified/Listed Class 2 power source only.

3

CONTENTS OF PACKAGE

Installation of the camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes.

Carefully remove the colour camera and its accessories from the carton and verify that
they were not damaged in shipment.

The content of the package includes:

1. Color CCD camera

2. Mini-DIN connector (for video-or dc-type auto-iris lens)

3. CS adapter ring for C mounting "C" lenses

4. This manual

TABLE OF CONTENTS

INTRODUCTION --------------------------------------------------------------------------------------- 4

CAMERA OVERVIEW -------------------------------------------------------------------------------- 5

CAMERA ADJUSTMENT ---------------------------------------------------------------------------- 6

CONTROL AND CONNECTIONS / DAY&NIGHT I/O TERMINALS----------------------- 13

LENS ----------------------------------------------------------------------------------------------------- 14

SPECIFICATIONS ------------------------------------------------------------------------------------- 15

4

INTRODUCTION

The camera provided high-quality image using SONY Wide Dynamic 1/3” Super-HADII
PS 960H CCD and digital signal processing LSIs.

Features:

 1/3" Super-HADII PS 960H CCD
 Super high-resolution of 650TV lines
 Wide Dynamic Range (~x512)
 Excessive High-Light Compensation
 Back Light Masking (MAX. 15 area)
 2D-NR, 3D-NR (DNR Demo)
 Day & Night(Auto, Manual, External, Filter delay)
 0.4 lux(Color), 0.04 lux(B/W), 0.001 lux(Low-Shutter) @ F1.4 Sensitivity
 Sens-Up (~x32)
 Various Detection Method (zone detection, motion trace, face trace, mine area,

absent detection, cross object counting, entrance counting)

 Scene Change Detection
 Various Alarm Method (Period, Snooze, Polarity Select)
 Frame Control (Auto, 1~7 sec)
 Privacy Mask or Mosaic (MAX. 15 area/4-point polygonal/transparency)
 Digital PTZ
 White Pixel Remove
 Back Light Compensation
 Digital Effect (H/V reverse, 180 degree rotate, inverse, freeze)
 System Lock (4-Digit password)
 Auto Electronic Shutter [1/50 ~ 1/100,000] and manual electronic shutter

modes [1/50 ~ 1/10,000]

 C/CS, back-focus cam for easy adjustment
 Auto and Manual white balance modes
 Support Line-Lock external synchronization
 RS-485 Remote camera control
 On Screen Display (OSD)
 Compatible with Video, DC type lenses with OSD select
 Quick connect for Video or DC lens with 4-pin connector
 User Certified / Listed Class 2 power source only
 Operates in 12VDC or 24VAC

5

CAMERA OVERVIEW

FRONT VIEW

SIDE VIEW

TOP VIEW

REAR VIEW (Free Voltage)

 Left Button
 Up Button
 Enter Button
 Right Button
 Down Button
 Day/Night External I/O

Motion ALARM OUT
RS - 485
UTP(optional)

 Power Indicator
 Video Output Connector (BNC)
 UTP or BNC Transformation Switch

(optional)

 AC/DC Compatible Input Terminal

AC Power Cord

REAR VIEW