Hitman Drum 1 User manual
Owner s Manual
Virgin Musical Instruments
Precaution
Thank you for purchasing this electronic instrument.For perfect operation and
security, please read the manual carefully and keep it for future reference.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage”within the product s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance(servicing)
instructions in the literature accompanying the product.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in
accordance with the manufacturer s instructions.
8) Do not install near the heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarizedplug hase two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety, if the provided plug does
not fit into your outlet. consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs. convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
(F igu re 1 )
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over(Figure 1).
13) Unplug this apparatus during lightning storms
or when unused for a long periods fo time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
CAUTION: Apparatus shall not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
Always make sure all batteries are inserted in
conformity with the +/- polarity markings.
Always replace all batteries at the same time. Do
not use new batteries together with old ones. Also,
do not mix battery types, since this can cause
overheating, fire, or battery filuid leakage.
Remove the batteries from the instrument if it is
not to be used for a long time.
Contents
Panel Controls .....................................................................
Assembly Instruction ............................................................
Connect ..............................................................................
Drum Module Connector Panel
..........................................
Connecting the Power Supply ............................................
Connecting a Laptop, Tablet, Smartphone etc. (AUX In jack)
..
USB MIDI .......................................................................
Connecting Headphones
...................................................
Let's Play
Switch the Power On ........................................................
Set the Master Volume
.....................................................
Select from Different Drum Kits
Volume Control for the Drum Pads
.....................................
[CLICK] Button (Metronome) ............................................
...........................................................................
.........................................
2
5
8
8
8
9
9
9
10
10
10
10
10
11
[REC/PLAY] Button ...........................................................
[SONG] Button ................................................................
[TEMPO/TAP] Button ........................................................
Factory Set .........................................................................
Drum Kits List .....................................................................
Voice List ............................................................................
Style List ............................................................................
MIDI Implementation Chart ..................................................
Specifications ......................................................................
12
13
14
15
16
17
19
20
21
Panel Controls
Top Panel
1
4
2
3
5
Rear Panel
8
CONNECT
TO BASE
RIDE
CRASH
9
HI-HAT
Back Panel of bottom case
6
7
10
USB
TO HOSTSNARE
AUX IN
PHONES
12
11
13 14 15
POWER
DC 9V
ON OFF
TO MODULE
2
CONNECT
Top Panel
1.MASTER VOLUME This is used to adjust LINE OUT volume,
headphone volume and LINE IN volume.
2.[TEMPO/TAP] Button This button is used to change the song's tempo
and metronome tempo, allows you to tap the
tempo on the pad to change the song's tempo.
3.[KIT] Button This button is used to set the volume and voice
of the pad.
4.[CLICK] Button This button is used to enter metronome setting
display, to adjust metronome volume, metronome
sound and type.
5.[REC/PLAY] Button This button is used to enter recording display, you
can also select user song playing mode.
6. [SONG] Button This button is used to enter the song select
display. You can turn off the percussion track of
the song, and adjust the song's volume.
7.[+][-] Button This button is used to select the parameters,
voices, etc.
3
Real Panel
CONNECT TO BASE
8. This jack is used to connect the module to
Back Panel of bottom case.
9. Trigger Input Jacks These jacks are used to connect the pads
to the Module.(HI-HAT, RIDE, CRASH, SNARE)
10. USB TO HOST This is USB MIDI jack. Connect PC or other
USB host devices that support USB audio
with a standard USB cable to transfer MIDI
data.
11. AUX IN Connect the output of an external audio
device, etc., to this jack (stereo mini jack).
This is convenient for playing along with
music from a tablet, laptop, smartphone
or other player device.
12. PHONES Connect a pair of headphones to this jack.
Back Panel of bottom case
13.POWER ON/OFF This is the power switch.
14.DC 9V Connect an DC adaptor to this jack.
CONNECT TO MODULE Back Panel of
15. This jack is used to connect
bottom case
to the module.
The LED dot indicates the SONG/PAD/KIT status; on the status of SONG,
the song number appears on the display; In PAD selection mode, the pad
name such as Snare, Crash, and Tom, etc.Will appear on the display. Press
KIT button, the drum kit number will be displayed on the LED.
KIT mode
PAD name
SONG m od e
4
Assembly Instruction
#1: Take out the bottom case from the
packaging and insert the two aluminum
tubes into the bottom case as shown.
Tighten the screw so that the case is
tight against the tubes.
#2: Take out the drum module and three
Tom pads from the packaging and insert
them on to the two aluminum tubes as
shown and tighten the screws. Make sure
the plastic support is tighten to both the
assembly and the tubes.
#3: Take out the cymbal poles from the
packaging and insert them into the pad
holes as shown in the figure and tighten
the T-screws.
#4: Assemble Crash cymbals as shown in
the figure and tighten the T-screws.
5
#5: Assemble the Hi-Hat cymbal as
shown in the figure and tighten the
T-screw.
#6: Take out the Snare pole from the
packaging and insert it into drum stand
as shown in the figure and tighten the
T-screw.
#7: Take outSnare Pad from the packaging
and insert it ontothe Snare poleas shown
in the figure and tighten the T-screw.
#8: The drum assembly should now be
completed. If you have a ny questi o n s
about assembly please contact us phone
or email for assistance: toll free
888-998-9848 or email
info@virginmusicalinstruments.com
6
Loading...