HiTi P910L User Manual
User Manual
HiTi P910L Digital Photo Printer
EN
Notice
Handling of this Manual
1. All rights reserved. No part of this user manual covered by the copyright herein
maybe reproduced or copied in any form or by any means, including translation,
without the written permission of HITI DIGITAL, INC.
2. The specifications in this manual are subject to change without prior notice.
3. In case of having any difficulties or finding the fault in this manual, your
information to HITI DIGITAL, INC. will be highly appreciated.
Introduction
This manual describes detailed instructions for handling of and basic operation of
HiTi P910L Digital Photo Printer. We will describe this product as “the printer” in
the manual.
Read this manual thoroughly to understand how to install and operate the printer
before using it.
Keep this manual near the printer and operators who can refer to this manual
periodically.
In case, lost or damaged this manual, contact your dealers.
In the case of transfer, do not forget to put this manual together with the
printer.
Content
Chapter 1. Important Safety Instruction .......................................... 1
Environments....................................................................................................... 1
Handling Instruction............................................................................................ 2
Handling Instruction for Consumable and Printed Output................................ 4
Chapter 2. Installing and Set Up...................................................... 5
Unpacking and Checking the Accessories ........................................................... 5
Parts Name and Function.................................................................................... 6
Printer Status Lamps Name and Printer Status ................................................ 7
Fixing Anti-tip Plate ............................................................................................ 8
Connecting Power Cable ...................................................................................... 8
Connecting USB Cable......................................................................................... 9
Connecting Personal Computer........................................................................... 9
Setting Ink Ribbon ............................................................................................. 10
Loading Paper .................................................................................................... 11
Installing Dust Box ............................................................................................ 13
Transporting the Printer ................................................................................... 13
Chapter 3. Routine Maintenance........................................................14
Cleaning of Thermal Head, Platen.................................................................... 14
Cleaning of Outer Cover .................................................................................... 15
Cleaning of Filter ............................................................................................... 16
Chapter 4. Error Handling..................................................................17
Printer Status lamps are displayed in red ........................................................ 17
Failure Symptoms.............................................................................................. 18
Paper Jam .......................................................................................................... 18
Power Supply Interrupted during Printing....................................................... 19
When the Ribbon is snapped.............................................................................. 19
Chapter 5. In order to more comfortably use .....................................20
Paper Pre-Cut function can be turned off through the printer driver. ............. 20
For the Customers in the U.S.A......................................................................... 21
For the Customers in Canada.............................................. 錯誤! 尚未定義書籤。
For the Customers in Europe............................................................................. 21
Specification .........................................................................................22
Chapter 1. Important Safety Instruction
This manual provides detailed instructions for the safety use of the printer.
Read this manual before operating the printer to ensure to have proper use.
In this manual, there are notes that require special attention.
For your safety operation, Safety notices are separated as follows:
Warning: Inappropriate handling can cause the death or serious wound.
Caution: Inappropriate handling can cause the wound for the users and/or
cause the physical damage.
It is difficult to forecast all the danger in setting and use of the printer.
Therefore, warnings in this Operation Manual, in the other documents on the
printer cannot cover all the cases.
In case of performing the operation or maintenance which are not described in
this manual, all the concern for the safety have to be taken care of at the
customer side.
Operations and the notification for the maintenance described in this
manual and other documents are for the proper use of the printer. In case of
using the printer for the other purpose, all the concern for the safety has to be
taken care of at the customer side.
Do not perform the operation which are prohibited in this manual and other
documents.
The contents that cannot be printed due to a failure while using the use of
this printer are not guaranteed.
Environments
To use the printer safety, please pay attention to the followings:
Caution: Do not let children to touch the printer or the cables. It can cause
accidents or electric shock.
Caution: Do not place the printer under humid or dusty place. It
can cause a fire, electric shock or printer problem. Do not place the printer
with dust, sand and high humidity such as bathing place, bathroom, hot
spring, on the street.
1
Chapter 1. Important Safety Instruction
Caution: Do not place the printer on rickety place and/or inclined place.
Printer may fall down or tumble and it can cause injury.
Warning: Do not insert or fall the metallic items or flammable items into
the printer through the openings of the printer, it can cause the fire and electric
shock.
Warning: Do not put vase, flowerpot, and cup with water inside or metric
items. In case the water spilt or metric items fall into the printer, it can cause the
fire and electric shock.
Warning: Do not block the openings of the printer. In case, the opening
blocked, the heat will remain inside and it can cause the fire.
Attention: Do not place the printer under the low temperature such as ski resort,
skating rink or open-air with direct sunlight.
Handling Instruction
In handling the printer, please pay attention to the followings;
Warning: Lift the printer from its box and put it onto a flat table or desk.
Warning: At nearly 13.5Kg, the printer is too heavy to be lifted by one
person. Also please take a good care of your hands and fingers when lifting the
printer from the box.
Warning: Be careful when you transport the printer on the slippery floor.
2
Chapter 1. Important Safety Instruction
Warning: In case you drop the printer, firstly turn off the power of the
printer and remove the power cable, then contact the dealers or service center. To
use the printer without any checking, can cause the fire or electric shock.
Warning: This product must be grounded, and always used with only the
specified power cable or the power cable accompanying this product.
If the product is used without ground, and current leakage occurs, fire or electrical
shock is most likely to result, and also cause signal-receiving interference to a radio,
a television receiver, and other similar electric appliances.
If the proper grounding connection is not possible, please contact to the dealers or
service center.
Warning: Secure the power cable firmly.
Warning: Do not attempt to service the printer beyond the instruction
specified in this document. In case, impossible to recover from the problem, please
contact to the dealers or service center.
Warning: The thermal head reaches high temperature during operation
but this is normal. Do not touch the thermal head.
Warning: Do not dismantle or remodel the printer. Some sections of the
printer contain a high voltage or become very hot. Ignoring this warning may cause
electric shock, fire, or burns.
Attention: Touching the surface of the thermal directly can cause the damage to
thermal head. When a hard object get into the printer, it can cause the damage to the
printer mechanism. In such case, please do not use the printer.
Attention: At installation, appropriate interface cable will be required with your
computer.
3
Chapter 1. Important Safety Instruction
Handling Instruction for Consumable and Printed Output
In handling the ink ribbon, paper and printed output, please pay attention to the
followings:
Attention: Paper Handling
・ Use the paper specified by HITI DIGITAL, INC.
・ Store the paper flat.
・ Store the paper in a dry and dark place to avoid the direct Sunlight.
(Temperature less than 30C, Humidity less than 60%).
・ Do not touch the paper surface before printing to avoid the fingerprints.
Attention: Ink Ribbon Handling
・ Use the ink ribbon specified by HITI DIGITAL, INC.
・ Store the ink ribbon in cool place to avoid the direct sunlight.
(Temperature less than 30C, Humidity less than 60%)
Attention: Printed Output Handling
・ Store the printed output in a dark place to avoid the direct sunlight.
・ Store the printed output away from the organic fluid such as benzene, thinner
and alcohol which may change or deteriorate the colors.
Caution: When abandon the ink ribbon, please handle it as harmful
industrial waste.
Caution: Be careful not to injure your hands with the paper edge when
handling paper.
Caution: If you do not use the printer for a long time, please remove the
paper and the ink ribbon from the printer.
4
Chapter 2. Installing and Set Up
This chapter explains the unpacking and set up of the printer.
Before proceeding to this chapter, please make sure to read Chapter 1.
Important Safety Instruction.
Unpacking and Checking the Accessories
1. Open the box and remove the box containing the accessories and protection
materials.
Attention: Keep the packaging materials. The box and protection materials are
necessary when moving or transporting the printer. Make sure that they are
retained.
2. Take out the printer by holding bottom of the printer.
Caution: This printer weighs about 13.5Kg. Please handle it carefully.
When lifting the printer, always hold bottom of printer. Otherwise, the printer may
be damaged.
3. Take out the accessories from the accessory box and check the contents.
Power Cable Dust Box Paper Flange(White) Paper Flange (Blue)
Quick Installation Guide
Anti-tip Plate USB Cable Driver &Software CD
5
Loading...