HITEC Aggressor SRX User Manual

INSTRUCTION MANUALINSTRUCTION MANUAL
Table of Contents
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
1. System Features
A. Radio Features
B. Programmable Features
1. Transmitter
2. Receiver
3. Servo
4. Accessories
5. Options
6. Available Versions
2. Transmitter Functions and Operations
A. Power Switch
B. LCD Display
C. Programming Buttons
D. RF Indicator Light
E. Steering Dual Rate
F. ATL Switch
G. Steering and Throttle Trims
H. Third Channel Linear Adjust
I. Third Channel (Shift) Button
J. Battery Cover
K. Antenna
L. Grip Pad
M. Module
N. Charging Jack
O. Steering Wheel
P. Capital Tension
Q. Throttle Trigger
R. Brake Limiter
3. Transmitter Functions and Operations
4. Recharging Batteries
5. Receiver Servo Connections
A. Receiver
B. Servos
C. Battery
6. Main Edit Mode
A. Entering the Main Edit Mode
B. Model Naming
C. Model Copy
D. Model Reset
E. Servo Reversing
F. Ti m e r
7. Programming Mode
A. Model Select
B. Sub-Trims
C. EPA (End Point Adjustment)
D. Exponential
E. Radio
8. Troubleshooting Guide
9. Warnings
10. Racers Tips
Introduction
Congratulations on your purchase of the Hitec Aggressor SRX computer radio. The Aggressor SRX is loaded with many great features to maximum your R/C experience. Please read this manual carefully to familiarize yourself with the operation of your new Aggressor SRX Computer Radio System.
1. System Features
A) Radio Features
- Ergonomically Designed 3-Channel Pistol Grip FM Computer Radio System
- Multi-Pixel LCD Display
- Removable Module for Easy Channel Changing (Spectra Compatible)
- Dual Rate Steering (Adjustable on the Fly)
- Brake ATL Switch (Adjustable Travel Length)
- Brake Lever Travel Limiter
- Steering Wheel Tension Adjustment
- Digital Trims
- Trim Center Audible Verification
- Third Channel "Shifting" Button
- Third Channel "Linear" Digital Trim
- Interchangeable Assorted Color Rubber Grip Pads in Two Sizes (Sold Separately)
- Foam Steering Wheel for Comfortable Control
- Transmitter Charging Jack for Optional Rechargeable Batteries
- Green RF (Radio Frequency) Indicator Light
- Two-Speed Menu Scrolling
- Transmitter Low Battery Alarm
B) Programmable Features
- Model Naming (4 Characters)
- Model Select (10 models)
- Sub-Trims
- Ch #3 Switch Set (Shift o r Linear)
- End Point Adjustment (EPA)
- Exponential Travel (Steering and Throttle)
- Timer
- Servo Reversing
- Model Reset (Factory Default)
Transmitter
Receiver
C) System Specifications
1. Transmitter
- Power Output: 300mW
- Capital Drain 180mA
- Modulation: FM
- Power Supply: 8AA Alkaline, NiCad or NiMh Batteries
- Frequencies: 27mhz (6 channels), 75mhz (30 channels) USA
2. Receiver
- HFS-03MM
- Modulation: FM, Single Conversion
- Power Supply: 4.8V- 6V
- Weight: 0.56oz
- Size: 1.5"x1.0"x 0.6"
- Current Drain: 30mA +/- 0.3mA
3. Servo
- HS-311
- One Resin Bushing
- Hitec Custom I.C
- Operating Speed : 0.15 sec AT 6v
- Output Torque : 51 oz.in AT 6v
- Weight : 43g(1.5oz)
- Size : 40 X 20 X 37mm
⻈⻈⻈⻈(1.6 X 0.8 X 1.4)"
- HS-645MG
- Dual Ball Bearing
- Metal Gears
- Operating Speed : 0.2 sec AT 6v
- Output Torque : 133 oz.in AT 6v
- Weight : 55.2g(1.9oz)
- Size : 41 X 20 X 38mm
⻈⻈⻈⻈(1.6 X 0.8 X 1.48)"
Servo
Accessories (Brake pad)
Option (Grip pad)
4. Accessories
- Brake pad : This small piece of foam can be attached to the brake lever to take up any space between it and your finger for a custom fit.
5. Options
- Grip pads: Blue, Red, and Black (Small Part # 54309 / Large Part# 54310)
- 1600 mAh NiMh Battery: Part# 54114
- Overnight Wall Charger: Part#43025
6. Available Versions
Standard: Part# 129271 (27 MHz)
Description: SRX Transmitter, HFS-03MM Receiver, (1) HS-311 servo, Alkaline Battery Tray.
Standard: Part# 129751 (75 MHz) Description: SRX Transmitter, HFS-03MM Receiver, (1) HS-311 servo, Alkaline Battery Tray.
Deluxe: Part# 129752 (75 MHz only) Description: SRX Transmitter, HFS-03MM Receiver, (1) HS-645MG Heavy Duty servo, Alkaline Battery Tray.
No Servos: Part# 129753 (75MHz only) Description: SRX Transmitter, HFS-03MM Receiver, Alkaline Battery Tray.
2. Transmitter Functions and Operations
A) Power Switch
B) LCD Display
C) Programming buttons
D) RF Indicator light
E) Steering Dual Rate
F) ATL Switch
G) Steering and Throttle trims
H) Third channel Linear adjust
I) Third channel (Shift) button
J) Battery Cover
K) Antenna
L) Grip Pad
M) Module
N) Charging Jack
O) Steering Wheel
P) Steering tension adjustment
Q) Throttle Trigger
R) Brake limiter
A) Power Switch
- Slide the switch up to turn the transmitter on, and down to turn it off.
- Warning: Always turn your transmitter on first and off last to prevent accidental runaways.
B) LCD Display
1. Model Name
2.Battery voltage & meter
C) Programming buttons
- Top left : Function
- Bottom left : Select
- Top right : Data "+"
- Bottom right : Data "-"
Loading...
+ 11 hidden pages