Hitachi Service Platform Business Division Group PCKCB100 Users Manual

Hitachi USB Finger Vein Biometric Authentication Unit

PC-KCB100

User Guide

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

USB cable in the package must be used for connection to host computer in order to meet
FCC emission limits.

Read all guidelines in this document carefully before using this product.
This document should be kept for the future reference.

Important Notices

 Quoting or partial / total reprinting of the contents of this document without license is

prohibited.

 The contents of this document are subject to change without notice.
 In the case of any errors, inaccuracies or omissions in the contents of this document, please

contact with your distributor.

 Hitachi, Ltd. permits the acquisition and use of the product according to the conditions

indicated in this document.

 According to the statements contained in previous paragraphs, Hitachi, Ltd. will not assume

any liability or obligation for damages of any kind arising from the use of this product.
Consequently, do not use the product unless you fully understand its operation.

Product Reliability

 The product you have purchased has been designed and manufactured for general office use.

Avoid its use for applications that require extremely high reliability or in cases where lives
or property may be at stake, for example the control of chemical plants, medical devices,
urgent communications etc. Hitachi, Ltd. assumes no liability for any such uses and for any
derived circumstances that may lead to accidents if used inappropriately .

 Hitachi, Ltd. do not guarantee the correct functioning of this product if it is used

simultaneously with other identification devices.

Regulations and Measures

 ICES-003 Statements

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

 Federal Communications Commission (FCC) Statement

1 / 13

Note: This equipment has been tested and found to comply with the limits for a class B

部件名称

铅

水银

镉

六价铬

多溴联苯

多溴二苯醚

（Pb）

（Hg）

（Cd）

（Cr(VI))

(PBB）

（PBDE）

印刷线路板

× ○ ○ ○ ○

○

机箱

○ ○ ○ ○ ○

○

连接线缆

○ ○ ○ ○ ○

○

光学部件

○ ○ ○ ○ ○

○

USB 线缆

○ ○ ○ ○ ○

○

digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

 Exports Regulations

Before exporting the product, verify legal requirements in each country in addition to U.S.
regulations for export control, and make all necessary arrangements accordingly. The above
applies to attachments and software surrounding the device as well. Contact your distributor
should you have any concerns.

Disposal

 When discarding this product, follow all regional and local laws. Also consult regulations

regarding the material of each component.

Hazardous substance table for China

有毒有害物质或者元素

○：表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 规定的限量要求以下.
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 规定的限量要求.
备注：以上部件中，部分含有有毒有害物质超过是由于目前行业技术水平所限，暂时无法实现替代或减量化。

2 / 13

Notes

Attention: If the device is not properly used, device failure may occur.

Important: If the device is not properly used, certain functions may not respond properly.

Safety Guidance

 Do not use this product near wet places such as humidifiers, washing machines,

cooking places, washbasins, baths and the like. This may cause damage to the
product.

 Do not use damaged or badly bent USB cables. If the cable is damaged, this may

cause interruptions or malfunction.

 Do not dismantle or modify this device. It may lead to damage and malfunction.

3 / 13

1. Introduction

1. Introduction

USB connector (Mini-B Type)

Scanning area (The area capturing the finger vein pattern)

Indicator LED

Anti-theft lock hole for a security cable

SIM card slot

Hitachi gratefully acknowledges your purchase of the Hitachi USB Finger Vein Biometric
Authentication Unit (hereafter referred to as “FV Unit”). The objective of this document is to
provide a basic understanding of how to handle and use the FV Unit.

1.1 Product characteristics

The FV Unit is a biometric authentication device that performs individual authentication by
capturing finger vein patterns.

1.2 What’s in the box

Your FV Unit package includes:

FV Unit ····························· 1 unit

USB Cable (1.8m/5.9ft) ······· 1 piece

1.3 FV Unit components

Overhead view

Back view

4 / 13