Hitachi Koki HV-F202SCL User Manual
A
21 3 4
Progressive scan CCD color camera
HV-F202SCL
A
Specifications
A
1. General
The HV-F202SCL is an UXGA high precision 3CCD progressive scan color camera, which has
single chip digital processing LSI, a C mount prism, three 1/1.8-inch 2,000,000 pixels square CCDs.
Our original digital image signal processing technology performs the high picture quality signal
processing and the picture compensating functions, beyond the capability of the other conventional
analog cameras.
B
More ever, high frame rate 30 FPS(s) can be transmitted by miniCameraLink interface, which is of
digital camera standards for FA. The two connector arrangement is considered so that the collision
of cable does not occur at the time of Meidum Configuration connection which enrich the pixel
gradation expression.
2. Outstanding features
(1) High resolution and color fidelity
The 1/1.8-inch 2,000,000 pixels square lattice progressive scan CCD and the dichroic prism for
C
D
E
SYMBOL DATE DESCRIPTION
MODEL HV-F202SCL
DESIGNED DATE
F
CHECKED DATE
RGB color achieve a high resolution of UXGA (1600(H) x 1200(V)) picture and good color
reproduction.
(2) Small-sized camera
The new designed camera has small SDR connector for digital output. Therefore, the camera
has the realization of small-sized shape of 55 (W) x 55 (H) x 89 (D) mm.
(3) mini CameraLink interface
CameraLink Version 1.13 support
It is based on the industrial camera interface standard of AIA （ Automated Image
Association） leadership. It is advantageous to the field, where high frame rate is needed
without losing camera performance, since the transmission speed of pixel clock can be
maintained by full screen output.
mini CameraLink
The SDR connector called mini CameraLink is adopted and two connectors are equipped in
a small case. Additionally, when using with L type connection, it is arranged as cable
collision does not occur.
Meidum Configuration connection support
IIt supports Meidum Configuration connection which enables the rich gradation expression
of each color of 10 bit or 12 bit.
-
Mar. 1,2011
PPROVED DATE
STORED DATE
(first edition)
TOLERANCE
UNIT
SCALE
21 3 4
Prod. Code - Order No.
TITLE
HV-F202SCL
Specifications
DWG.
No.
E400234503
DF022-4PE-T1
H.Kosaka H.Kosaka
(DRAWN) DESIGNED
REV.
SHEET
0 000
1
B
C
D
E
F
17
A
B
C
D
E
21 3 4
(4) C mount lens adapter
The de facto industry standard C mount lens adapter allows choosing from a various type of
lenses and optical systems.
(5) Digital processing for various picture quality enhancements
・ Independent six colors masking is the Hitachi innovation for optimizing color balance. The
saturation and the hue of 6 colors (Red, blue, green, cyan, magenta and yellow) are
adjusted independently to deliver the best color in image capture, microscope and other
applications.
・ It is equipped with the in out gradation control function using LUT. Other than normal
gamma 0.45 conversion, the function can set the conversion of in out gradation using look
up table (LUT) as a user option.
(6) Auto shading correction (ASC)
Color shading due to the aberration of C mount lens is automatically compensated (reduced).
(7) Versatile CCD drive functions
･Video frame capture on demand using external trigger signal.
See detailed specifications item 8.
･Long integration mode.
･Auto electronic shutter (AES) mode for stabilized video level.
(8) Versatile imaging functions
･Four application files.
User settings provided for sharpness (detail), masking etc.
･Scene color temperature is detected in dynamic for automatic white balance adjustment.
By varying the detection area in a scene, the whole white balance can be controlled in only the
area. Thus, even if a light source of a different color temperature enters the scene (e.g.,
situation often occurs in a retail showroom suddenly exposed to outdoor lighting when the
entrance door opens), white balance is not severely disturbed.
･Auto exposure (ALC : auto level control)
It can respond the changes in extremely high light by the digital measurement and AGC
(Automatic gain control), AES control using micro computer. In addition, AUTO EXPOSURE
(ALC) setting level and the peak/average of the AUTO EXPOSURE(ALC) characteristics can
be set through menu screen.
･Gain control
AGC(Automatic gain control) and manual gain control are available to select.
･Master black, R/B black, and R/B gain are variable.
A
B
C
D
E
F
F
DWG.
E400234503
No.
21 3 4
DF022-4PE-S1
SHEET
2
17
3. Specifications
(1) Imaging device (sensor type) 1/1.8-inch progressive scan interline CCD (x 3 sensor)
A
B
C
D
E
- Indication lens category 1/1.8 inch
Effective pixels (Active area) 1600 (H) x 1200 (V) (x 3 sensor for RGB) : Resolution
Pixel size 4.4 μm square lattice
- scanning area (Pixel area) 7.04mm (H) x 5.28mm (V), Diagonal 8.80mm (1/1.8 inch)
- Readout type, Transfer type progressive scan, Interline transfer
(2) scanning mode full pixel sequential scan
(3) scanning frequency Horizontal : 37.5kHz / Vertical : 29.95Hz / Pixel : 72.0MHz
(4) Optical system 1/1.8-inch F1.8 prism with IR cut filter
Graph is described later.
(5) Lens mount C mount Mount surface projection less than 4.0mm
(6) Flange focal distance 17.526 mm (Air conversion)
(7) Sensitivity 2000 lx, F5.6, light source halogen lamp temp.: 3200K
(8) Minimum illumination 12 lx, Video Level 50%, Gamma = 0.45
F1.8, Shutter : 1/30s, Gain +12dB
(9) Gamma 0.45 / 1.0 / LUT (Look Up Table : user customizable)
(10) Gain Manual : 0 to 12 dB / AGC : 0 to 12 dB (with limit setting)
(11) White balance Manual / One-push Auto / Continuance Auto
(12) Video output
Base configuration ( only D.OUT 1 )
Medium configuration ( using D.OUT 1 with D.OUT 2 )
(13) Video output format Base configuration 24bit (R:8bit, G:8bit, B:8bit)
Table is described later.
(14) Quantization level information Maximum data : 255 (8bit), 1023 (10bit), 4095 (12bit)
Video 100% white : 255 (8bit), 1023 (10bit), 4095 (12bit)
Video 0% black : 0, Minimum data : 0
21 3 4
(Lens selection guideline)
Use the lens less than 4.0mm as the projection item from the lens flange surface.
To obtain a good picture image by high resolution and few chromatic aberration, it is
necessary to choose an appropriate high resolution 3CCD type lens.
When using lens other than 1/1.8 type, there may be vignetting or insufficiency of light
around the image or occurrence of flare in the image, in this case combinational lens
selection is necessary.
Shutter : 1/30s, Gain 0dB
CaemraLink Version 1.13 standard
Control : Original
A
B
C
D
E
F
F
DWG.
E400234503
No.
21 3 4
DF022-4PE-S1
SHEET
3
17
A
B
C
D
21 3 4
(15) Electric shutter speed OFF / Auto (AES) / Manual (VARIABLE)
Variable shutter mode Exposure time : approx. 1/100,000 to 1/30 second
AES mode
Long time integration mode
Exposure time : approx. 1/100,000 to 1/29.95(shutter OFF) second
Exposure time : approx. 1/30 to 10 seconds in 1 frame steps
(16) Sync system Internal / VD external
(17) Frame on demand mode
Input mode (A) Fixed shutter mode : adjustable for polarity and delay
(B) ONE trigger mode : adjustable for polarity and delay
(C) VD reset mode : negative, frequency Approx. 29.95Hz
Trigger input CameraLink (CC1) or DCIN/SYNC connector
Input level 5Vp-p ± 0.5V
Output strobe signal
VD output : negative, frequency Approx. 29.95Hz
Synchronous output DCIN/SYNC connector
Output level 5Vp-p
(18) Registration Full screen 0.05% (not including lens response)
(19) Vertical contour correction 2H
(20) Sharpness (DTL) Level, WIDTH
(21) Color masking OFF / ON (6 color independent masking)
(22) Paint black Adjustable
(23) Black level Adjustable
(24) Knee Adjustable (Knee point and Knee slope)
(25) Power supply DC+12V ± 1V (input from DC IN / SYNC connector)
(26) Current consumption DC+12V Approx. 600mA (Approx. 7.2W)
(27) Ambient temperature (without dew condensation)
Performance 0 to +40℃ (+32 to +104 F), less than 90 % RH
Operation -10 to +40℃ (+14 to 104 F), less than 90 % RH
Storage -20 to +60℃ (-4 to 140 F), less than 70 % RH
(28) External dimensions 55(W) x 55(H) x 89(D) mm (not including protrusions)
(29) Mass Approx. 350g (without lens)
A
B
C
D
E
F
E
F
DWG.
E400234503
No.
21 3 4
DF022-4PE-S1
SHEET
4
17
21 3 4
(30) Remote control
(a) Signal system
A
Control system Start-stop synchronization system
Transmission rate 9600 bps
Data length 8 bits
Start bit 1bit
Stop bit 1bit
Parity None
Bit transfer LSB first
B
(b) Communications control system
Full control by remote control software, data send/receive by text data transfer to camera
microprocessor (BSC system handshake)
(c) Control items
A
B
1. Variable shutter 10 to 1/100,000 second
2. Trigger Mode Fixed shutter, One trigger, VD reset
3. Gain
C
4. AUTO EXPOSURE
5. White balance
6. Gamma
7. 6 vector independent masking
8. Paint black
9. Sharpness
10. Brightness
11. 24bit / 30bit / 36bit Factory setting: 24bit
D
12. Trigger pulse polarity Factory setting: POS
13. Trigger input CameraLink (CC1) or DCIN/SYNC connector
Factory setting: CC1
14. Output signal OFF, FLASH OUT and VD OUT
Factory setting: OFF
15. Application files
C
D
E
F
E
F
DWG.
E400234503
No.
21 3 4
DF022-4PE-S1
SHEET
5
17
4. Composition
(1) Camera
A
(2) Lens mount sheet
(3) DCIN/SYNC connector (HR10A-10P-12S)
(4) Installation guide
5. Optional accessories
(1) AC adaptor JC-100 (junction box is included)
B
(2) Junction box JU-F30
(3) Tripod adaptor TA-F202
(4) 12pin plug HR10A-10P-12S(01)
(5) Camera cable
Molded type Shield type
21 3 4
A
B
C
D
2 m C-201KSM C-201KSS
5 m C-501KSM C-501KSS
10 m C-102KSM C-102KSS
In the CE Marking region, use the shield type and install clamp filter
（ZCAT2035-0930A: TDK） at both ends of the cable.
C
D
E
F
E
F
DWG.
E400234503
No.
21 3 4
DF022-4PE-S1
SHEET
6
17
Loading...