Hitachi VM-E455LA, VM-E655LA User Manual

IMPORTANT SAFETY INFORMATION

VM-E455LA, VM-H655LA HITACHI

Instruction Manual

8mm Video Camcorder

VM-E455LA

HI 8 Video Camcorder

VM-H655LA

HITACHI AMERICA, LTD. HOME ELECTRONICS DIVISION

1855 Dornoch Court San Diego, CA 92173 Tel. 1-800-HATACHI (1-800-448-2244)

HITACHI (HSC) CANADA INC.

6740 Campobello Road Missisauga, Ontario, L5N 2L8 CANADA Tel. 1-800-HATACHI (1-800-448-2244)

Thank you for buying a Hitachi product. Please take time to become familiar with the manual and how it is set up. Keep it handy for feature reference.

QR30893 © Hitachi, Ltd. 1999 Printed in Japan KK-S(N)

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

IMPORTANT SAFETY INFORMATION ................................................................................................3

Important Safeguards ..............................................................................................................................4

Before You Begin....................................................................................................................................7

Read This First........................................................................................................................................8

Features ...................................................................................................................................................8

Getting Started.............................................................................................................................................9

Components and Accessories..................................................................................................................9

Optional RF Adaptor.............................................................................................................................10

Identifying Controls ..............................................................................................................................10

Charging the Battery .............................................................................................................................15

Checking the Battery's Charge..............................................................................................................18

Camcorder Power Sources....................................................................................................................19

Inserting and Removing Cassettes........................................................................................................20

LCD Monitor.........................................................................................................................................21

Active Screen ........................................................................................................................................23

Adjusting the Electronic Viewfinder.....................................................................................................23

Eyepiece Adjustment.............................................................................................................................24

Adjustment the Hand Strap...................................................................................................................24

Remaining Tape ....................................................................................................................................25

Using the Linear Time Counter.............................................................................................................26

Display in Viewfinder or on LCD Monitor...........................................................................................26

Setting the Date and Time.....................................................................................................................27

Basic Techniques.......................................................................................................................................28

Making a Basic Recording....................................................................................................................28

Using Instant Review............................................................................................................................30

Using Auto Focus..................................................................................................................................30

Using Manual Focus..............................................................................................................................31

Using the Power Zoom..........................................................................................................................31

Using the Digital Zoom.........................................................................................................................32

Using the INST. ZOOM (instant Zoom) Button...................................................................................32

Using Macro..........................................................................................................................................33

Playback................................................................................................................................................33

Playing Back Your Recording on Your TV.......................................................................................... 35

Video Effects in Playback Mode...........................................................................................................38

Multi Playback......................................................................................................................................39

Advanced Techniques ..............................................................................................................................40

Advanced Techniques ...........................................................................................................................40

Date Recording......................................................................................................................................40

Creating and Recording a Title.............................................................................................................41

Digital Effects Recording......................................................................................................................46

Using Digital Fade ................................................................................................................................49

Date Search ...........................................................................................................................................51

Using Memory.......................................................................................................................................51

Using Quick Edit...................................................................................................................................52

Attaching the Optional Wide or Tele Converter Lens ..........................................................................52

IMPORTANT SAFETY INFORMATION

Demonstration Mode.............................................................................................................................53

Dubbing from the Camcorder to a VCR ...............................................................................................53

Simple Programmable Edit (Edit remote control is optional accessory) ..............................................53

Using the Optional Edit Remote Control..............................................................................................57

Using Audio/ Video Dubbing ...............................................................................................................58

General Maintenance.................................................................................................................................59

Cleaning the Camcorder Heads.............................................................................................................59

Cleaning the Lens and Picture Tube of the Electronic Viewfinder.......................................................60

Periodic Maintenance............................................................................................................................60

Troubleshooting ....................................................................................................................................61

Specifications........................................................................................................................................63

IMPORTANT SAFETY INFORMATION

For Your Safety

The CAM/OFF/VIDEO switch turns the camcorder on and off, leaving the date/time feature unaffected. If the unit is to be left unattended for a long period of time, turn the camcorder off and close the lens door.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

The camcorder and AC adapter/charger have the following caution marks.

Identifications of caution marks

This symbol warms the user that uninsulated voltage within the unit may have sufficient magnitude to

cause electrical shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this

unit has been included. Therefore, it should be read carefully to avoid any problems. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND FULLY INSERT PLUG.

Precautions

WARNING: Many television programs and films are copyrighted. In certain circumstances, copyright law may

apply to private in-home videotaping of copyrighted materials. This Class B digital apparatus meets all requirements of the Canadian ICES-003.

IMPORTANT SAFETY INFORMATION

The liquid crystal display (LCD) panel is made by highly precise technology. More than 99.99% of its picture elements (pixels) are effective, but some (less than 0.01%) may appear as colored bright dots. This does not indicate a fault as the LCD panel stretches the limits of current technology.

Information for VM-H655LA:

This camcorder can use

or Hi and recorded and plays it back correctly.

Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Caution to the user: Changes or modifications not expressly approved by the manufacture could void the user's authority to operate the equipment.

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical".

and Hi video cassettes. it automatically determines the loaded cassette is

Notes:

• This unit uses 8mm video format cassettes.

• It records and plays back in the SP mode (14.3 mm/sec).

• It cannot record and play back in the LP mode (7.2 mm/sec).

MOISTURE

Avoid operating your camcorder immediately after moving it from a cold place to a warm, humid place. Give the camcorder 2 to 3 hours to stabilize in the ambient conditions of the surroundings before inserting a cassette. When moved from a cold place to a warm, humid place, moisture may condense on the head drum inside the machine. This moisture could cause the tape to stick to the headwheel and damage the headwheel or tape. When a small amount of moisture is sensed, "TAPE" flashes in the viewfinder or LCD monitor. Remove the cassette and set the CAM/OFF/VIDEO switch to OFF, then wait for about one hour.

Important Safeguards

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper use of a Video camcorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference.

IMPORTANT SAFETY INFORMATION

INSTALLATION

1 Read and Follow Instructions -- All the safety and operating instructions should be read before the video

product is operated. Follow-all operating and use instructions.

2 Retain Instructions -- The safety and operating instructions should be retained for future reference. 3 Heed Warnings -- Comply with all warnings on the video product and in the operating instructions. 4 Polarized Plug -- This video product is equipped with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. To prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension, use a polarized cord.

5 Power Sources -- This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your video dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. 6 Overloading -- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords, damaged or cracked wire insulation and broken plugs. They may result in a shock or fire hazard. Periodically examine the cord and have it replaced by your service technician if appearance indicates damage or deteriorated insulation.

7 Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 8 Ventilation -- Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug or other similar surface. This video product should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the video product manufacturer's instructions have been followed.

9 Attachments -- Do not use attachments unless recommended by the video product manufacturer as they may cause hazards.

IMPORTANT SAFETY INFORMATION

Caution: Maintain electrical safety. Powerline operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessory itself and should not have been modified so as to defeat the safety features. This will help avoid any potential hazard from electric shock or fire. If in doubt, contact qualified service personnel.

10 Water and Moisture -- Do not use this video product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 11 Accessories -- Do not place this video product on an unstable card, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 11A An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

IMPORTANT SAFETY INFORMATION (cont.) 12 Outdoor Antenna Grounding -- If an outside antenna or cable system is connected to the video product, be

sure the antenna or cable system is grounded so as to provide some protection against voltage surges and builtup static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example below:

EXAMPLE OF ANTENNA GROUNDING

13 Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna installer.

USE

14 Cleaning -- Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning. 15 Object and Liquid Entry -- Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.

IMPORTANT SAFETY INFORMATION

16 Lightning -- For added protection for this video product during a lightning storm, or when it its left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable-system. This will prevent damage to the video product due to lightning and power-line surges.

SERVICE

17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. e. If the video product has been dropped or the cabinet has been damaged. f. When the video product exhibits a distinct change in performance - this indicates a need for service. 19 Replacement Parts -- When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the video product manufacturer can prevent fire, electric shock or other hazards. 20 Safety Check -- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks recommended by the manufacturer to determine that the video product is in safe operating condition. 21 Heat -- The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Before You Begin

Any problems that occur as a result of any of the following conditions will not be covered by our warranty.  Do not shoot the sun directly. Otherwise, the lens will be faulty.  Be careful that no water, dust or sand enters the camcorder and all accessories.  When you shoot at a scene which contains an extremely bright object such as the sun or a light source, a bright vertical bar may appear in the picture. Your camcorder is functioning properly, but the solid-state pickup device (C.C.D) usually causes this as an inherent characteristic. Try to avoid shooting an excessive bright object directly.  Be sure not to leave the camcorder in a place where the temperature exceeds 140°F (60°C), or the pickup

IMPORTANT SAFETY INFORMATION

device may be damaged. Dangerous includes:

• Inside a car with the windows closed and in direct sunshine.

• Near heating appliances.  Do not leave the viewfinder lens and the liquid crystal display (LCD) screen facing sunlight for a prolonged period, or the phosphorescent surface of the cathode ray tube and the LCD panel may be damaged.

Read This First

To guide you, we've included:

• An "Important Safety Information" section containing important cautions for your family's safety as well as

instruction for getting your video camcorder ready for use. Please read and understand this section thoroughly before moving on.

• A "Getting Started" section to familiarize yourself with the controls and prepare you for recording.

• A "Basic Techniques" section to allow you to use your video camcorder quickly and confidently before advancing to the more sophisticated features of the Hitachi VM-E455LA/VM-H655LA.

• "Advanced Techniques" to help you with some of the exciting, sophisticated features of the Hitachi VME455LA/VM-H655LA. We hope you will take the time to learn about these functions since they have been designed for you. You can use the video camcorder without reading this section.

• A "General Maintenance" section to help keep your purchase in good repair.

We want this manual to be as helpful as possible, so it includes two easy ways to find the information you need:

• A quick index for the information you use most often (this page).

• A detailed table of contents directing you to specific information quickly (page 8).

Get to know your video camcorder by using this manual, and get to know Hitachi. We appreciate your business.

Quick Index

Charging the Battery----------------------------------------------------------------------------14 Setting the Date and Time---------------------------------------------------------------------24 Making a Basic Recording---------------------------------------------------------------------26 Zooming--------------------------------------------------------------------------------------------28 PlayBack-------------------------------------------------------------------------------------------30 Dubbing from Camcorder to VCR------------------------------------------------------------48

Features

• Easy to use

• 2.5-inch color liquid display (LCD) monitor with speaker

• Active screen

• Perfect power (Lithium-ion battery)

• 100X zoom ratio

• 200X digital zoom (with instant zoom)

• Digital effect

• Fade in / Fade out

• Instant zoom

• Recorded date search

Getting Started

• Automatic title recording

• Video effects

• Multi playback (PAL60 conversion)  Types of differences

VM-E455LA VM-H655LA System

Getting Started

This section guides you through the initial preparation of the camcorder. None of these processes are complex. Set aside some time, relax, and familiarize yourself with this quality instrument.

Enjoy getting to know all about your Hitachi 8mm camcorder. The more comfortable and familiar you are with the machine and its features, the more you can make it do for you. Let's get started!

It is crucial that you read and understand all the safety instructions before you begin. If you haven't read the safety instructions yet, please take the time to do so now.

Components and Accessories

Check that you have all the following components and accessories before proceeding.

1. Audio/video output cable

2. Battery pack

3. AC adapter/charger

4. Batteries for date/title

Getting Started

Optional RF Adaptor

If you wish to connect this camcorder to a television that does not have audio/video input jacks you will need to use the optional RF adapter model VM-RF86A (R).

Identifying Controls

1. Lens Door

The door will automatically open when the CAM/ OFF/VIDEO switch is set to "CAM". Setting the switch to "OFF" will close the door.

2. Record Indicator

This indicator flashes when the camcorder is recording.

3. Microphone

Sensitive to sounds coming from the direction in which the camera is pointed.

4. CAM/OFF/VIDEO Power Switch

This switch turns the camcorder on and off. Set the switch to CAM for camera recording, and to VIDEO for playback. Hold down the small red button as you slide the switch to CAM or VIDEO. You do not need to hold down the red button to slide the switch to OFF.

5. F.FWD Button

Use this button to fast forward tapes or for visual search. During visual search the camcorder fast forwards at approximately 9 times normal playback speed. During fast forward, press and hold this button to visually scan the tape forward at 19 times the normal playback speed. ("Using Forward and Reverse Search", p3l) Also use this button to set date and time and create a title ("Creating and Recording a Title", p39).

6. PLAY Button

Use to play back recorded tapes and create a title. ("Creating and Recording a Title", p39)

7. REW/REVIEW Button

Use this button to fast rewind tapes or for visual search. During visual search the camcorder rewinds at approximately 7 times normal playback speed. During rewind, press and hold this button to visually scan the tape backwards at 17 times the normal playback speed. ("Using Forward and Reverse Search", p3l) Also use this button to set date and time and create a title ("Creating and Recording a Title", p39). Furthermore, use this button to review the last few seconds of the tape you are recording.

Getting Started

8. STOP Button

Use this button to stop playback, fast forward, or reverse. Also use this button to set date and time and create a title. ("Creating and Recording a Title", p39).

9. BATTERY Release Lever

Releases the battery attached to camcorder.

10. CHARGE Indicator

When the battery is being charged, this indicator will flash or fight to show the charged level as a reference

11. Electronic Viewfinder

12. Diopter Control

To use the electronic viewfinder, pull the eye cup all the way, and then turn this control for your optimum focus adjustment

13. Power Supply Attachment Section

Attach the battery here

14. AUDIO/VIDEO Output Jacks (Behind the jack cover)

Use this jack to connect the camcorder to a VCR or television

• Connect the yellow plug of the audio/video cable to the yellow jack (VIDEO OUT) and the white plug to the white jack (AUDIO OUT).

15. DC IN Jack

Plug in the AC adaptor here to charge a battery or power the camcorder from AC outlet. In addition, connect the optional car battery cord to this jack, in which case, you will need a DC cord (optional).

16. Shoulder Strap Slots

Attach a shoulder strap here.

17. OPEN Button

Push this button to open the LCD monitor.

18. Bright Control Buttons

Use this to adjust the brightness of the LCD monitor screen

19. LCD Monitor

You can view the pictures as they are being recorded and play them back immediately after recording on the LCD screen.

20. Cassette Holder

A power source must be connected to the camcorder before a cassette can be inserted or removed.

21. EJECT Button

Press this button to open the cassette holder. A power source must be connected before cassettes can be inserted or removed though the CAM/ OFF/VIDEO switch maybe set to OFF

Note: The EJECT button is inoperable unless the LCD monitor is completely open.

22. Speaker

You can listen to the recorded sound.

Note: No sound is heard when the LCD monitor is closed.

23. FOCUS/VOL. (volume) Control Buttons

When the CAM/OFF/VIDEO switch is set to CAM, these buttons will be the focus control buttons. Press them simultaneously to select manual or automatic focusing. To control focus manually, press the bring the subject into focus. When manual focus has been engaged, "FOCUS" will appear in the viewfinder or on the LCD monitor.

or button to

Getting Started

When you are viewing playback pictures on the LCD monitor with the CAM/OFF/VIDEO switch set to VIDEO, these buttons can be used to control the volume of the built-in speaker

24. DATE/DISP Button

When the CAM/OFF/VIDEO switch is set to CAM, this button can be used as the DATE or DISPLAY button: set the date and time, and select the date display you want to record ("Setting the Date and Time", p24 and "Date Recording", p38). In the VIDEO mode, the DATE/DISP. button is used as the DISPLAY button ("Display in Viewfinder or on LCD Monitor", p22).

Note: Be sure to insert the clock battery before setting the date and time or creating a title.

25. EFFECTS Button

Getting Started

Use this button to digitally process the image you are going to record or the playback image. During recording, you can select among six modes: 16x9, negative/ positive, X400 digital zoom, half-mirRor, mosaic, or art ("Digital Effects Recording", p42). During playback, you can select among three modes: 16x9, art, or sepia ("Video Effects in Playback Mode", p35).

26. FADE Button

The FADE button features six modes; white fade, wipe fade, mosaic fade, art fade, zoom fade and black-andwhite fade ("Using Digital Fade," p44).

27. PAL60 Button (Multi Playback)

Use this button when connecting the camcorder to a PAL TV which handles PAL60 mode signal and has vertical sync adjustment circuitry for 60Hz.

Notes:

• Make sure "PAL60" is not displayed when connecting the camcorder to an NTSC TV for playback, or monitoring the playback picture on the camcorder's LCD monitor. If 'PAL60" Is displayed in the above cases, no color will appear in the picture.

• The PAL60 button is effective during playback only.

• See TV instruction manual for details about setting of PAL60 mode.

• Depending on the state of the tape recorded, the PAL60 button may not operate normally.

• Tape recorded on PAL system cannot be played back.

• The PAL60 mode will be released when the camcorder is turned off.

28. Audio/Video Output Jack (Behind the jack cover)

Use this jack to connect the camcorder to a television ("Connecting to a Television without Audio In and Video In Jacks", p34).

Getting Started

29. Start/Stop Button

When the CAM/OFF/VIDEO switch is in CAM press this button to start recording. When pressed a second time the camera pauses. During playback use this button to stop the tape temporarily. Pressing a second time resumes normal playback.

30. Hand Strap

Refer to page 21.

31. Clock Battery Compartment

Pull the battery holder and install the clock battery (provided). (See "Loading Clock Battery" on page 21.)

32. Power Zoom Control

Use this to zoom automatically ("Using the Power Zoom", p28).

33. INST. ZOOM (instant Zoom) Button

Use this button to magnify the image being recorded 1.5 times.

34. Tripod Mounting Threaded Socket

Use this threaded socket to mount the camcorder to a tripod.

Getting Started

Charging the Battery

The first step is to set the battery for charging. To charge the battery, attach it to the camcorder, and connect the VM-ACE5A AC adaptor. Charge the battery at a temperature range of 50°F (10°C) - 86°F (3O°C) to prevent damage to the battery.

Note: This camcorder operates with a lithium ion battery such as VM-BPL13/VM-BPL27/VM-BPL30/VMBPL60.

Note: We cannot be responsible for any malfunctions of the camcorder which occur when you use battery packs other than those specified.

Charge the battery on a flat surface this is free of vibration.

1 Make sure the CAM/OFF/VCR switch is set to OFF position.

2 Attach the battery pack to the camcorder.

• Align the bottom of the battery with mark slide the battery downward, as illustrated.

on the camcorder so that the battery fits into the grooves. Then

Note: Always attach a battery only by the procedure described here. Attaching a battery forcibly could damage it. 3 Plug the AC adaptor power cord into an AC outlet.

Make sure that the wide blade fits into the wide slot. If it doesn't fit, try reversing it. If the blades still do not fit fully into the outlet, either contact an electrician to replace your obsolete outlet, or use a polarized cord or outlet

Getting Started

accessory. 4 Connect the AC adaptor DC plug to the DC IN jack of the camcorder.

Charging will start within five seconds. During charging, the CHARGE indicator of the camcorder will flash or light to give you a reference of the charged level.

Note: If the CHARGE Indicator flashes once every two seconds, the battery could be defective. Note: The CHARGE indicator will not light at all when the AC adaptor is defective. Note: You can use the battery before it Is completely charged. Note: When charging is complete, the CHARGE indicator on the camcorder will light. IF the fully charged battery

is removed and then reattached, the camcorder will again enter the charge mode, and the CHARGE indicator will flash. It will take a few minutes for the camcorder to enter the charge complete status.

Note: Charging at low temperatures will decrease charge capacity. 5 After charging is complete, disconnect the AC adaptor DC plug from the camcorder. 6 Disconnect the AC plug from the AC outlet. 7 Detach the battery from the camcorder.

Note: Always remove the battery from the camcorder after use. Note: Charging is not done when the CAM/ OFFLINE switch of the camcorder is set to CAM or VIDEO, However,

if recording pause continues for more than 5 minutes in the CAM mode, the camcorder will automatically turn off, after which charging will start.

Note: If the DC plug is disconnected when the battery is attached and the CAM/OFF/VIDEO switch Is set to CAM or VIDEO, the camcorder will turn off once, but then automatically turn on again, Note that the battery will discharge If the camcorder is left as is.

Removing the Battery Pack

Slide the BATTERY release lever in the direction of the arrow and hold it; then slide the battery to the upper side and remove.

Reference of Charged Level

You can know the approximate charge level of battery by observing how the CHARGE indicator of camcorder flashes or lights:

Charge level CHARGE indicator 0-50% charge 50-75% charge

Flashes once at approx. one-second intervals. Flashes twice at approx. one-second intervals.

Getting Started

More than 75% charge Full charge

Flashes three times at approx. one-second intervals. Steady light

Charging Time

Pack Charging 130 . 230 min. 260 min. 460 min.

70 min. 140 min. 160 min. 320 min.

Battery Charging

Full Charge 75% Charge

VM-BPL13VM-BPL27VM-BPL30VM-BPL60

170 min 300 min 330 min 590 min 100 min 190 min 210 min 410 min

Operating Time

The camcorder operating time depends on how often you turn power on/off and use start/stop and zoom.

Continuous Recording EVF: when using the viewfinder LCD: when using the LCD monitor

Battery VM-BPL13 VM-BPL27 VM-BPL30VM-BPL60 EVF LCD

Typical Recording EVF: when using the viewfinder LCD: when using the LCD monitor

Battery VM-BPL13 VM-BPL27 VM-BPL30VM-BPL60 EVF LCD

160 min. 330 min. 370 min. 760 min. 120 min. 260 min. 290 min. 630 min.

90 min. 190 min. 200 min. 420 min. 70 min. 150 min. 170 min. 380 min.

Notes on the Battery

• It is recommended that the battery always be left in the discharged state when not in use, and charged before you use it.

• Avoid storing a fully charged battery, and do not store it in a place where the temperature is high: this will damage the battery.

Getting Started

• Do not operate the battery at temperature below 14°F (-10°C) or above 113°F (45°C). At extremely low temperatures operation time decreases, while at high temperature the battery may be damaged,

• Do not attach a hot battery to the camcorder. Allow it to cool.

THERE ARE NO USER-SERVICEABLE PARTS

INSIDE THE BATTERY

OR AC ADAPTOR.

THROWING THE BATTERY INTO FIRE

OR EXPOSING IT TO EXCESSIVE HEAT

(ABOVE 140°F [60°C])

MAY CAUSE INJURY.

SHORTING THE BATTERY'S TERMINAL

INCREASES RISK OF FIRE OR

ELECTRICAL SHOCK.

Checking the Battery's Charge

A battery charge indicator is located on the upper right comer of the viewfinder or LCD monitor. One of six symbols displays when the battery is used.

Note: The battery charge indicator does not appear when the camcorder is powered by the AC adaptor.

This flashing symbol indicates a battery nearly out of power. Use an alternative power source or charge the battery before continuing to use the camcorder.

Knowing Remaining Battery Power Time

If you use the VM-BPL30 lithium-ion battery (optional) to power the camcorder, you can finding out how much camcorder operating time remains, with the battery.

The VM-BPL30 measures the battery consumption, calculates the remaining battery time, and displays it (in minutes) in the viewfinder or on the LCD monitor. Since the camcorder power consumption varies according to how frequently autofocusing or zooming is used, the displayed time may decrease or increase several minutes at a time, or may not change for some time.

Note: The remaining battery time will appear 10-15 seconds after the CAM/OFF/VIDEO switch is set to CAM; it will not appear in the VIDEO position.

Note: When the remaining time decreases to 5 minutes or less, the time display will disappear. We recommend that you replace the battery earlier.

Getting Started

Note: If you connect the VM-BPL30 battery with the remaining battery time of 5 minutes or less, the time will not be displayed.

Note: If the correct remaining time does not appear, use up the battery attached to the camcorder, and then fully charge it.

Note: If you repeat charging and discharging the battery before using it up, the correct remaining time may not be displayed.

Note: If the battery is used at low temperatures, the actual operating time with battery will be substantially different from the displayed time, and the correct time may not appear.

Note: If the battery which has been used at low temperature is subsequently used at normal temperature, display of remaining battery time will be incorrect. For display of correct remaining time, fully charge the battery.

Note: The remaining battery time will not appear when you are recording an image of yourself, or the LCD monitor Is put back to camcorder with its screen facing to the side.

Note: If you eject and reinsert cassette after the battery is discharged, power will shut off midway and the camcorder will stop. When the battery is discharged, immediately remove it from the camcorder and charge it again.

Note: When the VM-BPL30 battery is used, the battery charge indicator " battery time display (in minutes). In this case, refer to the remaining time display when using the camcorder.

To display the correct remaining battery time on camcorder

• Fully charge the battery before use.

• Turn the camcorder on and leave it pointing at a still subject for about 30 seconds. Do not move the camcorder during this time.

• If display does not change some time, open and close the LCD monitor while you are using the camcorder.

" may not match the remaining

Camcorder Power Sources

You can use the charged battery pack, AC adaptor (provided) or car battery cord (optional) to power the camcorder, After use, be sure to remove the power supply,

Using Battery Pack

1 Attach the charged battery pack to the camcorder. (See pages 16 and 17 for attachment and charging of battery pack.)

Using the AC Adaptor

Please ensure that the CAM/OFF/VIDEO switch is in the OFF position whenever attaching or detaching any power supply (le. battery, AC adaptor, etc.).

Getting Started

1 Plug the AC adaptor power cord into an AC outlet. Make sure that the wide blade fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the blades fully into the outlet either contact an electrician to replace your obsolete outlet, or use a polarized cord or outlet accessory.

2 Connect the DC plug of the AC adaptor to the DC IN jack of the camcorder. Note: The AC adaptor can be used around the world. An AC plug adaptor is required in some foreign countries. If

you need one purchase it at your Hitachi distributor.

Using a Car Battery

The camcorder con be powered with a car battery by using an optional car battery cord (Hitachi VM-CC80A) to plug the camcorder into the car's cigarette lighter socket. Please ensure that the CAM/OFF/VIDEO switch is in the OFF position whenever attaching or detaching any power supply (le. battery, AC adaptor, etc.).

1 Plug the car battery cord into the car's cigarette lighter socket. 2 Connect one end of the DC cord (optional) to the DC IN jack of the camcorder. Connect the other end of the DC

cord to the DC OUTPUT of the car battery cord.

`Note: You need the optional VM-CC80A KIT Note: Only use the car battery cord with cars having 12/24 volts negative ground system. Note: You cannot use the car battery cord to charge a battery.

Inserting and Removing Cassettes

A power source must be connected before Inserting or removing cassettes. Once connected, cassettes can be inserted or removed whether the CAM/OFF/VIDEO switch is on or off.

Inserting a Cassette

1 Press the OPEN button to open the LCD monitor

2 Press the EJECT button. " automatically.

Caution: Do not touch the cassette door when a cassette is being loaded or unloaded. If your finger is caught by the metal section of holder, it could be cut.

EJECT" will appear on the LCD monitor, and the cassette door will open

Note: Cassette cannot be inserted or ejected unless the LCD monitor is open: Open the monitor until it is at right angles to the camcorder.

+ 45 hidden pages