Hitachi SRU 5040-05 User Manual
SRU 5040/05
Instructions for use
Quick, Clean & Easy Setup
www.philips.com/urc
Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . . . 8
Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Restoring the original remote control settings . . . . . . . . . . . . . . . . . . 9-10
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 11-32
Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1. Introduction
Congratulations on your purchase of the Philips SRU 5040 universal remote
control. After installing the remote control you can operate a maximum of
4 different devices with it:TV, DVD player/recorder, video recorder and STB
(settop box, satellite or cable decoder).You can find information about how
to prepare this remote control for use in the chapter ‘Installing the remote
control’.
2. Installing the remote control
Inserting the batteries
1 Press the cover inwards and slide it in the
direction of the arrow.
2 Place two AAA type batteries into the
battery compar tment, as shown.
3 Slide the cover back and click it firmly into
place.
Note: If the device indicators in the selector window (TV, DVD, STB and VCR) blink
four times after every key press, the remote control is indicating that its
batteries are running low. Replace the old batteries with two new AAA
batteries.
Testing the remote control
The remote control has been programmed to operate most Philips devices.
Because the SRU 5040 may use different signals for each brand and even for
different models of the same brand, it is advisable to test whether your device
responds to the SRU 5040.The example below (TV) instructs you how to do
this.You can repeat the same steps for other devices (DVD player/recorder,
video recorder, etc.) which you want to operate using the SRU 5040.
Example of TV:
1 Turn your TV on manually or use the original remote control.
Tune to channel 1.
4
Instructions for use
English
2 Press the SELECT key to select TV.
Press the key until TV lights up in the selector
window.
If TV does not light up, check whether the
batteries are properly inserted
(see ‘Inserting the batteries’).
3 Check whether all keys are working.
For an overview of the keys and their
functions see ‘3. Keys and functions’.
– If the TV responds as it should to all of the
key commands the SRU 5040 is ready for use.
• If the device does not respond at all or not to all of the
key commands, follow the instructions under
‘Setting the remote control’, or for online setup go to:
www.philips.com/urc.
Setting the remote control
This is only necessary if your device does not respond to the SRU 5040.
If that is the case, the SRU 5040 does not recognize the brand and/or model
of your device and you need to program the remote control to do so.
The example below (TV) instructs you how to do this.You can repeat the
same steps for other devices (DVD player/recorder, video recorder, etc.)
which you want to operate using the SRU 5040.
Automatically setting the remote control
The remote control will now automatically search for the right code for your
device.
Example of TV:
1 Make sure the TV is switched on and select a channel using the original
remote control or the keys on the TV (for example channel 1).
• If the device is a DVD player/recorder or video recorder,
insert a disk or tape and star t playback.
2 Press the SELECT key to select TV.
Press the key until TV lights up in the selector
window.
3 Then keep keys 1 and 3 pressed
simultaneously for five seconds until TV in the
selector window flashes twice and then
remains lit.
4 Press and hold the Standby key of the
SRU 5040.
5
Instructions for use
English
– The SRU 5040 now starts emitting all known
‘TV off ’ signals, one by one.
Each time a code is sent,TV in the selector
window lights up.
5 When your TV switches off (stand-by), release the Standby key of the
SRU 5040 immediately.
– The SRU 5040 has now found a code that works on your TV.
6 Check if you can operate all functions on your TV with the SRU 5040.
• If this is not the case, you can redo the automatic setting.
The SRU 5040 will then search for a code that works better.
– After the SRU 5040 has run through all the known codes, the search
will stop automatically and TV in the selector window will stop flashing.
– Automatic programming of a TV takes a maximum of 5 minutes.
For DVD,VCR and STB this time is 2 minutes
Manually setting the remote control
Example of TV:
1 Turn on the TV manually or use the original remote control.
Tune in to channel 1.
2 Look up the brand of your TV in the
code list at the back of this manual. One or
more four-figure codes are shown for each
brand. Note the first code.
Be careful! There are separate tables for TV, video,
DVD, etc.
On our website www.philips.com/urc you can directly select your device
typenumber to find the right code.
Make sure you use the codes from the correct table.
3 Press the SELECT key to select TV.
Press the key until TV lights up in the selector
window.
4 Keep keys1 and 3 pressed simultaneously
for five seconds until TV in the selector
window flashes twice and then remains lit.
5 Then enter the code noted in step 2 using the digit keys.
– TV in the selector window will now flash twice.
If TV flashes once for an extended period, the code has not been
entered properly or the wrong code has been entered.
Start again from step 2.
6 Point the SRU 5040 at the TV and check that it responds as it should.
– If the TV responds to all of the key commands, the SRU 5040 is ready
for use. Do not forget to note your code.
6
Instructions for use
English
• If the device does not respond at all, or not to all of the
key commands, start again from step 2 and try the next code
from the list.
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 y Standby . . . . . . . . . . switches TV,VCR, DVD or STB on or off.
2 LEARN. . . . . . . . . . . . . switches the SRU 5040 into learning mode.
3 . . . . . - teletext on/off ( );
- text off ( );
- wide screen TV ( );
- text hold ( ).
4 MENU. . . . . . . . . . . . . . turns the menu on and off.
5 Cursor keys . . . . . . . . cursor up, down, left, right in a menu.
6 AV . . . . . . . . . . . . . . . . . switches between external inputs of your
equipment.
7 s. . . . . . . . . . . . . . . . . . . mutes the sound of the TV.
8 - VOL +. . . . . . . . . . . . . adjusts the TV volume.
9 Digit keys . . . . . . . . . . direct choice of channels and other functions.
0 SHIFT. . . . . . . . . . . . . . for extra functions. When pressed at the same
time as a second key, the second key will get
another function. All blue labelled keys can be
used together with SHIFT. For example:
SHIFT + INSTALL . installs your TV
SHIFT + STORE . . . stores TV settings
Try out other combinations with the SHIFT-key on your device in order to
find out which functions are available.
Only functions featured on the original remote control are available.
! 5 . . . . . . . . . . . . . . . . . . - red teletext key.
- rewind (VCR/DVD).
2 . . . . . . . . . . . . . . . . . . . - index.
- play (VCR/DVD).
6 . . . . . . . . . . . . . . . . . . - blue teletext key.
- wind (VCR/DVD).
9 . . . . . . . . . . . . . . . . . . . - green teletext key.
- stop (VCR/DVD).
0 . . . . . . . . . . . . . . . . . . . record.
; . . . . . . . . . . . . . . . . . . . - yellow teletext key.
- pause (VCR/DVD).
@ / . . . . . . . . . . . . . . . . . . selects between one- and two-figure channel
numbers.
#22/ SURROUND . . - selects previous programme/channel.
- selects surround modes.
$ - PROG +. . . . . . . . . . . selects a previous or following channel.
% GUIDE . . . . . . . . . . . . . opens electronic TV program guide (STB).
^ OK . . . . . . . . . . . . . . . . . confirms your selection.
& BACK . . . . . . . . . . . . . . jumps back one level in the menu or turns off
the menu.
* SELECT. . . . . . . . . . . . selects TV, DVD, STB or VCR mode.
If the device does not respond at all, or not to all of the key
commands, follow the instructions under ‘Setting the remote control’.
It is possible that you must enter another code for the device.
7
Instructions for use
English
4. Extra possibilities
Adjusting device selection (Mode selector)
The SRU 5040 is default set for operating TV,VCR, STB (settop box, satellite
or cable decoder) and DVD.You can select the device you wish to operate
with the SELECT key (mode selector). Each option allows operation of one
device only. If desired, you can program the SELECT key (mode selector) to
select a different kind of device. For example, if you want to operate a
second TV.
In the following example you will see how to configure the STB mode for a
second TV.
1 Switch on the second TV.
2 Press the SELECT key to select STB.
Press the key until STB lights up in the
selector window.
3 Then keep keys 1 and 6 on the SRU 5040
pressed simultaneously for five seconds, until
STB in the selector window lights up.
4 Press keys 9, 9 and 2, in that order.
5 Press the SELECT key to select TV.
Press the key until TV lights up in the selector
window.
6 Press the 1 key.
– STB in the selector window flashes twice.
STB will now allow you to operate your
second TV.
7 Program the SRU 5040 to operate the second TV.
See ‘Setting the remote control’.
Adding a function to the remote control
If you want to add a function to the SRU 5040, you can contact the
Philips service line for Universal Remote Control to ask for the 5-figure code
for the extra function.
8
Instructions for use
English
Learn a key
IIf you miss certain functions from your original remote control on the
SRU 5040, the SRU 5040 can learn these functions from the original remote
control.You can store a fuction under any of the available keys onthe
SRU 5040, except LEARN, SELECT and SHIFT. Please, note that any function
already stored under a key will be deleted.
Example for VCR:
Make sure you have the original VCR remote control at hand.
1 Select the device mode VCR, with the
SELECT key.
2 Press the LEARN key and the target key on
the SRU 5040 simultaneously for 5 seconds,
until VCR in the selector window blinks twice
and then remains lit.
3 Place both remote controls on a flat surface
(like a coffee table) and aim them head-tohead with about 5 - 10 cm in between.
4 Press the button you want to copy on the original remote control.
– If the SRU 5040 has learned the code,VCR in the selector window
blinks twice to confirm the signal is stored.
– If VCR blinks once for a longer period, the IR signal is not learned by the
SRU 5040. Please, try a few times and make sure the remote controls
are aligned as described in step 3.
If the SRU 5040 cannot learn the code after several times trying,
it is possible that:
– The IR signal of your original device is out of range (the SRU 5040 can
only learn IR signals with a carrier signal of 30-60kHz.
– The memory of the SRU 5040 is full.
– The SRU 5040 stopped the learning process after 20 seconds if no
IR signals are found. Check if your original remote control is working
correctly.
Restoring the original functions of your remote
control
1 Keep keys 1 and 6 on the SRU 5040 pressed
simultaneously for five seconds, until one of
the device indicators (TV, DVD, STB,VCR)
lights up in the selector window.
9
Instructions for use
English
Codes TV
2 Press keys 9, 8 and 1, in that order.
– The device indicator in the selector window
flashes twice. All original functions have now
been restored and any extra functions have
been deleted.
5. Troubleshooting
• Problem
– Solution
• The device indicators in the selector window (TV, DVD, STB and VCR)
blink four times after every key press.
– The remote control is indicating that its batteries are running low.Replace the old
batteries with two new AAA batteries.
• The device you want to operate does not respond and it’s indicatior in
the selector window does not flash when you press a key.
– Replace the old batteries with two new AAA batteries.
• The device you want to operate does not respond but it’s indicatior in
the selector window does flash when a key is pressed.
– Point the SRU 5040 at the device and make sure that there are no
obstructions between the SRU 5040 and the device.
• The SRU 5040 does not respond properly to commands.
– Maybe you are using the wrong code. Try programming the SRU 5040 again
using another code, which is mentioned under the brand of your device, or
reset for automatic search to find the right code.
If the device still does not respond, call our helpline.
• The Teletext keys do not work.
– Find out whether your TV is equipped with Teletext.
• You have difficulties operating all of the functions on your device.
– Maybe the SRU 5040 has to be adapted to the model of the device.
Call our helpline for details.
• Your brand of device is not in the code list.
– Try to set the SRU 5040 automatically.
See ‘Automatically setting the remote control’.
• None of the codes works during manual setting of the remote control.
– If that is the case, follow the instructions under
‘Automatically setting the remote control’.
6. Need help?
If you have any questions about the SRU 5040, you can always contact us.
You will find our contact details after the code list at the back of this manual.
Read this manual carefully before you make a call.You can solve most of the
problems yourself. If you cannot find any answers to your problems, write
down the details of your device shown in the code list at the back of this
manual.This will help our operators to assist you better and more quickly.
Look up the numbers of the models in the instructions accompanying the
device or on the back of your device.When you call our helpline, make sure
the device is to hand so that our operators can help you determine whether
your remote control is working properly.
The model number of your Philips universal remote control is SRU 5040/05.
Date of purchase: ......../......../........
(day/month/year)
10
Instructions for use
English
TV
TV
TV
TV
TV
TV
Codes TV
SETUP CODES FOR TV
A.R.Systems . . . . . . 0064, 0583, 0401, 0482
Accent . . . . . . . . . . . . . . . 0064,0583, 0036
Accuphase. . . . . . . . . . . . . . . . . . . . . . 0583
Acura. . . . . . . . . . . . . . . . 0583, 0064, 0036
Adcom. . . . . . . . . . . . . . . . . . . . . . . . . 0652
Addison . . . . . . . . . . . . . . . . . . . 0135, 0680
Admiral . . . . . . . . . 0114, 0120,0190, 0390
Adyson . . . . . . . . . . . . . . . . . . . 0243, 0244
Agashi . . . . . . . . . . . . . . . . . . . . 0243, 0244
Agazi . . . . . . . . . . . . . . . . . . . . . . . . . . 0243
AGB. . . . . . . . . . . . . . . . . . . . . . . . . . . 0543
Agef. . . . . . . . . . . . . . . . . . . . . . . . . . . 0114
Aiko . . . . . . . 0243, 0036,0398, 0099, 0062
. . . . . . . . . . . . . . . . 0388, 0218,0244, 0243
Aim . . . . . . . . . . . . 0064, 0099, 0583,0482
. . . . . . . . . . . . . . . . . . . . . . . . . . 0733, 0832
Aiwa . . . . . . . . . . . . . . . . . . . . . 0728, 1943
Akai . . . . . . . 0036, 0062,0064, 0099,0190
. . . . . . 0218, 0243,0244, 0245, 0378, 0388
. . . . . . 0398, 0475,0500, 0507, 0543, 0575
. . . . . . 0579, 0583,0633, 0658, 0729, 0741
. . . . . . . . . . . . . . . . . . . . . 0742, 0839,1564
Akashi . . . . . . . . . . . . . . . . . . . . . . . . . 0036
Akiba . . . . . . 0064, 0245,0309, 0321,0482
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0583
Akira . . . . . . . . . . . . . . . . . . . . . . . . . . 0445
Akito . . . . . . . . . . . . . . . . . . . . . 0064, 0583
Akura . . . . . . 0036, 0064, 0245, 0303, 0309
. . . . . . . . . . . . . . . . 0386, 0695,0741, 1064
Alaron . . . . . . . . . . . . . . . . . . . . . . . . . 0243
Alba . . . . . . . 0036, 0063, 0064, 0190, 0243
. . . . . . 0245, 0262,0274, 0382, 0398, 0445
. . . . . . 0458, 0514,0695, 0741, 1064, 0583
Alcyon. . . . . . . . . . . . . . . . . . . . . . . . . 0103
Allorgan . . . . . . . . . . . . . . 0233, 0244, 0321
Allstar . . . . . . . . . . . . . . . . . . . . 0064, 0583
Ambassador . . . . . . . . . . . . . . . . . . . . 0204
Amplivision . . . . . . . . . . . 0244, 0397, 0427
Amstrad . . . . 0036,0064, 0204,0245, 0398
. . . . . . . . . . . . . . . . . . . . . 0543, 1064,0583
Anam. . . . . . . . . . . . . . . . . . . . . . . . . . 0036
Anam National . . . . . . . . . . . . . . . . . . 0677
Anex . . . . . . . . . . . . . . . . . . . . . . . . . . 0448
Anglo. . . . . . . . . . . . . . . . . . . . . . . . . . 0036
Anitech. . . . . 0036, 0064, 0103,0309, 0583
Ansonic . . . . 0397, 0064,0036, 0695, 0401
. . . . . . 0190, 0319,0286, 0274, 0455, 0319
. . . . . . . . . . . . . . . . . . . . . . . . . . 0131, 1464
AOC . . . . . . . . . . . . . . . . 0036, 0120, 0135
Apollo . . . . . . . . . . . . . . . . . . . . . . . . . 0500
Arc en Ciel . . . . . . 0426, 0136, 0595, 0223
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0528
Arcam . . . . . . . . . . . . . . . . . . . . 0243, 0244
Ardem . . . . . . . . . . . . . . . . . . . . 0064,0741
Aristona. . . . . . . . . . . . . . . . . . . 0064, 0583
ART. . . . . . . . . . . . . . . . . . . . . . . . . . . 1064
Arthur Martin . . . . . . . . . 0427, 0190, 0264
ASA . . . . . . . . . . . . 0132, 0373, 0114,0131
Asberg . . . . . . . . . . . . . . . 0064,0583, 0103
Asora. . . . . . . . . . . . . . . . . . . . . . . . . . 0036
Astra . . . . . . . . . . . . . . . . . . . . . . . . . . 0064
Asuka. . . . . . . . . . . . . . . . 0245, 0244,0309
Atlantic . . . . . . . . . . . . . . 0064, 0583, 0233
Atori . . . . . . . . . . . . . . . . . . . . . . . . . . 0036
Auchan . . . . . . . . . . . . . . . . . . . 0427, 0190
Audiosonic. . . . . . . 0064, 0583, 0244,0401
. . . . . . 0397, 0741,0364, 0742, 0245, 0513
. . . . . . . . . . . . . . . . 0455, 0036,0136, 0847
Audioton . . . . . . . . . . . . . 0244, 0455, 0513
Ausind . . . . . . . . . . . . . . . . . . . . . . . . . 0103
Autovox . . . . 0103, 0114, 0233, 0244, 0264
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0274
AWA . . . . . . 0038, 0063, 0064, 0583, 0243
. . . . . . . . . . . 0244, 0135,0036, 0401, 0633
Axxent . . . . . . . . . . . . . . . . . . . . . . . . 0036
Axxon . . . . . . . . . . . . . . . . . . . . . . . . . 0741
Ayomi . . . . . . . . . . . . . . . . . . . . . . . . . 0265
Baihe . . . . . . . . . . . . . . . . . . . . . . . . . . 0036
Baile. . . . . . . . . . . . . . . . . . . . . . 0036, 0401
Baird. . . . . . . . . . . . 0099, 0220, 0244, 0136
Bang & Olufsen . . . . . . . . . . . . . 0114, 0592
Baosheng. . . . . . . . . . . . . . . . . . . . . . . 0036
Barco . . . . . . . . . . . . . . . . 0190,0579, 0407
Basic Line. . . . . . . . 0245, 0401,0583, 0190
. . . . . . 0695, 0244,0309, 0482, 0036, 0064
. . . . . . . . . . . . . . . . 0244, 0366,0583, 1064
Bastide. . . . . . . . . . . . . . . . . . . . . . . . . 0244
Bauer. . . . . . . . . . . . . . . . . . . . . . . . . . 0832
Baur . . . . . . . 0222, 0064, 0583, 0581, 0218
. . . . . . 0388, 1532,0376, 0482, 0539, 0562
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0581
Bazin . . . . . . . . . . . . . . . . . . . . . . . . . . 0244
Beijing. . . . . . . . . . . 0036, 0253,0401, 0839
Beko. . . . . . . 0397, 0513,0583, 0742,0062
. . . . . . 0741, 0633,0064, 0445, 0835, 1064
Beon . . . . . . . . . . . . . . . . 0064, 0583, 0445
Berthen . . . . . . . . . . . . . . . . . . . . . . . . 0695
Best . . . . . . . . . . . . . . . . . 0364, 0397, 0448
Bestar. . . . . . . . . . . 0064, 0583, 0397, 0401
Bestar-Daewoo . . . . . . . . . . . . . . . . . . 0401
Binatone . . . . . . . . . . . . . . . . . . . . . . . 0244
Black Diamond . . . 0641, 0847, 1064,1936
Black Star . . . . . . . . . . . . . . . . . . . . . . 0274
Blacktron. . . . . . . . . . . . . . . . . . . . . . . 0309
Blackway . . . . . . . . . . . . . . . . . . 0309, 0245
Blaupunkt. . . . . . . . 0581, 0218,0482, 0197
. . . . . . . . . . . . . . . . . . . . . 0222, 0063,0562
Blue Sky . . . . 0064, 0741,1064, 0514,0695
. . . . . . . . . . . 0482, 0742,0309, 0245, 0583
Blue Star . . . . . . . . . . . . . . . . . . . . . . . 0309
Bondstec . . . . . . . . . . . . . . . . . . . . . . . 0274
Bondstec . . . . . . . . . . . . . . . . . . . . . . . 0274
Boots. . . . . . . . . . . . . . . . . . . . . 0244, 0036
BPL . . . . . . . . . . . . . . . . . . . . . . 0064, 0309
Brandt . . . . . 0652, 0528, 0426, 0314, 0223
. . . . . . . . . . . 0314, 0362,0595, 0136, 0587
. . . . . . . . . . . . . . . . . . . . . . . . . . 0264, 0741
Brandt Electronic . . . . . . 0314, 0362, 0528
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0595
Brinkmann . . . . . . . 0445, 0583,0513, 0064
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0695
Brionvega. . . . . . . . . . . . . 0064, 0583, 0114
TV
CODELIST
11
Loading...