Hitachi SBW100 User Manual

Model Name
SBW100

Soundbar and Wireless Subwoofer

ENGLISH

Owners Guide

Thank you for purchasing this Hitachi product. Please read these instructions carefully.

Keep this owners guide for future reference. Record the serial number of

your Soundbar and Wireless Subwoofer Audio System for future reference.

SERIAL NO. ________________________

This information is located on the back of the Soundbar

IMPORTANT SAFETY INSTRUCTIONS ............................................................................. 2-3

KEY FEATURES .................................................................................................................. 4

SUPPLIED PARTS AND ACCESSORIES ........................................................................... 5

GETTING STARTED ............................................................................................................ 6

WALL MOUNTING ............................................................................................................... 7

CONTROLS AND FUNCTIONS ......................................................................................... 8-9

SETUP INSTRUCTIONS (HOOKUP GUIDE) ..................................................................... 10

WIRELESS LINK ................................................................................................................. 11

HOOKUP DIAGRAM ............................................................................................................ 12

SPECIFICATIONS ................................................................................................................ 13

TROUBLESHOOTING ........................................................................................................ 14

LIMITED WARRANTY .......................................................................................................... 15

TM

Revision 090810

2

Important Safety Instructions

SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI SBW100 SOUNDBAR AND WIRELESS
SUBWOOFER AUDIO SYSTEM.

Our reputation has been built on the quality and performance of the Hitachi Soundbar and Wireless Subwoofer Audio System.

Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section illustrates safety
tips which will be of benefit to you. Please read it carefully and apply the knowledge you obtain from it to the proper operation of your Hitachi
Soundbar and Wireless Subwoofer Audio System.

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of a

sufficient magnitude to constitute a risk of electric shock to a person.

The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

READ BEFORE OPERATING EQUIPMENT

Follow all warnings and instructions marked on this Soundbar and
Wireless Subwoofer Audio System.

Read these instructions.1.
Keep these instructions.2.
Heed all warnings.3.
Follow all instructions.4.
Do not use this apparatus near water.5.
Clean only with a dry cloth.6.
Do not block any ventilation openings. Install in accordance 7.
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat 8.
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-9.
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched 10.
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use the attachments/accessories specified by the 11.
manufacturer.

apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

The system is designed to comply with the recommended 15.
safety standards for tilt and stability. Do not apply excessive
pulling force to the front, or top, of the cabinet which could
cause the product to overturn resulting in product damage
and/or personal injury.
Follow instructions for wall, shelf or ceiling mounting as 16.
recommended by the manufacturer.

Power Source

This audio system is designed to operate on 120 volts 60 Hz, AC current. Insert the power cords into a 120 volt 60 Hz outlet. The main plugs
are used as the disconnect device and shall remain readily accessible.
To prevent electric shock, do not use the audio system’s cords with an extension cord, receptacle, or other outlet unless the blades
and ground terminal can be fully inserted to prevent blade exposure.

Never connect the audio system to 50 Hz, direct current, or anything other than the specified voltage.

ENGLISH

FOR MORE INFORMATION, CALL 800-289-0981 .

Use only with the cart, stand, tripod, bracket, or table specified 12.
by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms 13.
or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing 14.
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the

Lead Notice

This product contains lead. Do not put in trash. Recycle or dispose of according to applicable laws. For product recycling
and disposal information, contact your local government agency or visit www.eiae.org (in USA).

FOR MORE INFORMATION, CALL 1-888-885-2782.

Important Safety Instructions

Caution

Never remove the back covers of the audio system as this can expose you to very high voltages and other hazards. If the
system does not operate properly, unplug the audio system and call your authorized dealer or service center.
Adjust only those controls that are covered in the instructions, as improper changes or modifications not expressly approved by
Hitachi could void the user’s warranty.

Warning

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.•
The system should not be exposed to dripping or splashing and objects filled with liquids, such as vases, should not be •

placed on the system.
This apparatus shall be connected to a mains socket outlet with a protective earthing connection.•

FEDERAL COMMUNICATIONS COMMISSION NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and the receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•
Consult the dealer or an experienced radio/television technician for help.•

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hitachi
America, Ltd., may void the user’s authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1)This device may not cause harmful interference and (2)This device must accept any interference received, including inteferance that
may cause undesired operation.
For questions regarding this declaration, contact:

Hitachi America, Ltd.

Tel. [phone]
ATTN: Customer Relations

Precautions

• Do not place the system on uneven surfaces or near the edge of the cabinet, it has high potential to tumble over, it may damage the
product, it may also cause personal injury.

• Do not climb on the system, it may drop or may damage the system, it may also cause personal injury.

• Unplug immediately if any foreign materials falls into the system, or if the system fell down.

• Unplug immediately if there is a malfunction on the system like no sound or if there is smoke and bad odor coming from the system.

• Do not open the system’s cabinet.

• Avoid direct sunlight, dusty, high humidity and smoky locations.

• Remember to unplug the power cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the
system.

• Do not place the system near water, such as a bathtub, shower rooms, kitchen sink, laundry tub or swimming pool. Avoid placing liquid
containers on top of the system.

• Do not place the system in confined spaces or inside a box when the system is operating.

• Make sure to unplug the system when not in use for a long period of time (days).

Notice for Remote Control

• Avoid dropping the unit.

• Avoid liquids on it.

• Avoid aerosol cleaners.

3

4

Key Features

Congratulations on your purchase of the Hitachi SBW100 Soundbar and Wireless Subwoofer audio system. The SBW100 is designed
to be the easiest way to get much better sound with your flat panel television. It is designed to mount either on the desk top with the
supplied table stands or on the wall with the supplied wall mount kit.

You will enjoy outstanding audio performance due to use of patented ClassHDTM amplifiers and a novel surround processor called FX
(Fractal Expansion). The SBW100 is best used with TV’s from 32” up to 42” where its compact size and styling will unobtrusively
complement your TV and the room décor.

Advanced Technologies in the UltraThin Home Theater Soundbar and Wireless Subwoofer

Wider Sound Stage: Vector Firing (VF) Side Drivers

The Vector Firing Side Drivers(4) enhance both stereo and FX surround modes. The
sweet spot for listening is wider and the surround effects are more dramatic as a result
of the VF side driver design and Fractal Expansion processing.

High Efficiency Amplifier Technology: ClassHD

The UltraThin Soundbar employs a new class of patented audio amplifier called
ClassHDTM. The ClassHDTM amplifier is more efficient at normal listening levels than
conventional amplifiers and even more efficient than Class D digital amplifiers. This
new technology allows for a very compact audio system design with the performance
of a much larger audio system. Another advantage to the ClassHDTM amplifier is that
there is no need for bulky external power adapters. The Soundbar and Wireless
Subwoofer have independent AC power cords so that the Subwoofer can be placed
anywhere in the listening room.

TM

State-of-the-Art Processing: Fractal Expansion (FX)

Experience a convincing surround sound presentation from the10-speaker Soundbar
and Subwoofer. Fractal Expansion is an advanced audio processing technology that
converts the 2 channel stereo into a wide sound stage with virtual center and surround
images that will amaze and thrill you. This advanced processing preserves the tonal
accuracy of the original sound source to create rich sound. You can enjoy your favorite
music using Fractal Expansion or select the high fidelity stereo mode.

Dramatic Low Frequency Response: High BL* Wireless Subwoofer

The Wireless Subwoofer delivers deep, strong, and dynamic bass all the way down to
35 Hz. The ClassHDTM amplifier in the Subwoofer has the capability to outperform
conventional amplifiers of its rating. The extra performance of the amplifier is matched
to the very strong High BL woofer to give movie special effects dynamic impact. The
independent Subwoofer level control allows you to adjust only the level of deep low
frequencies without changing the crossover frequencies to preserve the tonal accuracy
of the entire Soundbar and Subwoofer system.

* BL is determined by the flux density (B) in the magnetic gap and the length (L) of voice
coil wire in the gap. A higher BL will generally mean a speaker will have a higher
relative sensitivity (efficiency).

Supplied Parts and Accessories

SBW100 Soundbar

SBW100 Wireless Subwoofer

Remote Control

Table Stands

Owners Guide

Hookup Cable - RCA 3 Feet

CR2025 Lithium Battery for Remote Control

HOW TO REPLACE THE BATTERY

STEP 1: Press the button toward right.
STEP 2: Pull the battery loader out.
STEP 3: Replace CR2025 battery.
Make sure that the bottom (Plus Mark) side of the battery
is facing toward you.

Rear View of Remote Control

CR2025

STEP 1

STEP 2

CAUTION

- Do not insert battery with ‘+’ and ‘-’ polarities reversed as this
may cause the battery to swell or rupture resulting in leakage.

- Remove the battery if the remote control is not going to be
used for an extended period of time.

- Do not put the battery in the general household trash. Dispose
of the battery according to applicable laws.

Hookup Cable - Stereo Mini Cable

Wall Mount Kit

5

Getting Started

Determine how you want to set up your Soundbar and Wireless Subwoofer Audio System.

The following figures show 2 (two) typical installation styles. One is the Table Top style and the other is the Wall Mount style.

Table Top Style

You can set the Soundbar on the cabinet that is properly
designed to place the Soundbar and the TV. Please install
the supplied stands by following the instruction that is shown
on the bottom of this page. You can place the Subwoofer on
the floor.

Wall Mount Style

You can mount the Soundbar on a wall by using the supplied
hardware kit. The input jacks and power cord are designed to
allow a flush mount. Please follow the instructions that are
shown on page 7 of this Owners Guide. You can place the
Subwoofer on the floor.

Location

Select an area where sunlight will not fall directly on the products. Also, be sure that the location selected allows a free flow of air to and
from the products. In order to prevent an internal temperature increase, maintain the following space requirements.

Soundbar
Top / Bottom / Back: No clearance required - can be flush mounted.
Left / Right: At least 6” (150 mm) clearance required.
Front: Open between the Soundbar and the listeners.

Subwoofer
Top / Back / Left / Right: At least 2” (50 mm) clearance required.
Front: Open between the Soundbar and the listeners.

The wireless range of your SBW100 is up to 100 feet, but it may vary depending on your operating environment.

Installing the stands

In order to place the Soundbar on the cabinet or the shelf, you need to install the supplied 2 (two) stands by using the following installation
guide. Please make sure that the cabinet or the shelf is strong enough and well secured.

Step 1

Insert the top tab of the stand
into the hole provided for the
stand in the back of the
Soundbar.

6

Step 2

Make sure that the top
tab is fully inserted into
the hole.

Step 3

Swing down the stand all
the way until the stand hits
the Soudbar so that the
base of the stand will be
underneath of the bottom
of the Soundbar. Then
push up the stand to fit the
Soundbar.

Step 4

Make sure that the both stands are
installed as shown in the above
picture.

Wall Mounting

Wall Mounting

The SBW100 system comes with a wall mounting kit to be used with a wall mounted TV. The input jacks and power cord are
designed to allow a flush mount where the Soundbar extends only 2” (50 mm) from the wall. Also, the Soundbar is provided
with an extra long power cord so the user may hide the AC line by using a wall track that could be painted to match the wall.
Follow these steps to mount the Soundbar on a wall:

1. Measure the width of the TV – the Soundbar
should be mounted so it is centered with the
TV. Divide the TV width measurement by 2 –
that will be the centerline distance from the
edges of the TV.

X”

X/2”X/2”

2. If the Soundbar is to be mounted below the
TV, measure from the TV edge to the
centerline distance on the open wall below
the TV. Mark the distance with a pencil
1-1/2“ (38 mm) or more below the bottom
of the TV.

3. Make a pencil mark 10-7/16” (265 mm) on

1-1/2”
or more

each side of the centerline. Make sure the
mark is the same distance down from the
TV on each side.

2. Make a pencil mark
1-1/2” or more below
the bottom of TV.

4. Make another mark 25/32“ (20 mm) directly
below the 1st mark on each side.

1-1/2”
or more

4. Make another pencil mark on
each side of centerline.

5. Drill a ¼” hole in the wall at each of the four pencil marks.

6. Hammer the 4 wall mount anchors into the holes ­ the anchors should be flush with the wall.

7. Now, using a Philips screwdriver, screw the wall brackets in place
with the screws going into the anchors.

1. Find centerline
of TV.

10-7/16” 10-7/16”

10-7/16”

10-7/16”

Top

3. Make a pencil mark on
each side of centerline.

25/32”

To Wall (Anchors)

8. Tilting the bottom of the Soundbar slightly away from the wall, guide the brackets into the matching holes on the back of the
Soundbar. The Soundbar is now securely wall mounted.

[NOTES] The supplied mounting kit can be used for typical drywall construction. Mounting to wood, concrete, brick or other
types of wall construction will require different hardware. Hitachi recommends seeking professional assistance for
such installations.
The instructions on this page and the supplied wall mount kit are only for the vertical wall mount. Professional
assistance is required for other mounting or installation orientations (e.g., horizontal, tilted).

7

Controls and Functions

The controls and functions of the SBW100 and the Remote Control are explained below.

Front Panel Controls / LED Indicators

1

2

3

8 9

Rear Panel of Soundbar

10

4

11

5

12

1

REMOTE CONTROL Sensor
Point your remote control at this area when you use the

remote control.

2

POWER ON Indicator
Plug the power cord into the AC outlet. The Soundbar goes

to the standby mode, and this indicator is also turned off.
Press the POWER button to turn the Soundbar on, this
indicator will illuminate to indicate the Soundbar is on.
This indicator will remain on as long as an input signal is
active. If the input becomes inactive the Soundbar will
change to standby mode to conserve power and this
indicator will turn off.

6

7

13

FX SURROUND (FX) / STEREO (ST) Indicator

3

The FX indicator lights up when FX Surround is selected.
The ST indicator lights up when Stereo Mode is selected.
This indicator will turn off after about 3 seconds from
selecting the surround setting.

4

MUTE ON Indicator
This indicator lights up when mute is on.

This indicator will turn off after about 3 seconds from turning
mute on.

5

MAIN VOLUME / SUBWOOFER VOLUME
Level Indicator
This indicator shows the level of the main volume or

Subwoofer volume when you use the MAIN VOLUME Button
or the SUBWOOFER VOLUME Button respectively.
The indicator will turn off after about 3 seconds from
adjusting the volume.

6

INPUT SELECTION Indicator
The 1, 2, or 3 indicator lights up when INPUT 1, INPUT 2, or

INPUT 3 is selected, respectively, by pressing the INPUT
Button.
The indicator will turn off after about 3 seconds from
selecting the input.

18

19

14

15

16

17

Rear Panel of Subwoofer

8

Controls and Functions

PAIR Indicator

7

This indicator flashes during the pairing process between the
Soundbar and Subwoofer. After the link between the Soundbar
and Subwoofer is established, this indicator will turn off.

8

POWER Button
Plug the power cord into the AC outlet. The Soundbar goes to

the standby mode.
Press this button to turn the Soundbar on. The POWER
indicator will illuminate to indicate the Soundbar is on. The
Soundbar will remain on as long as an input signal is active. If
the input becomes inactive the Soundbar will change to standby
mode to conserve power.
To completely turn off the Soundbar, press this button again.

SURROUND Button

9

This button is used to select either the FX SURROUND mode
or the STEREO mode.

10

MUTE Button

Press this button when you want to activate the audio mute.

Press it again to deactivate the mute function. Pressing the
VOLUME buttons will also deactivate the mute function.

MAIN VOLUME Buttons

11

Press the + or - button to adjust the main volume up or
down respectively.

12

SUBWOOFER VOLUME Buttons
Press the + or - button to adjust the Subwoofer volume

up or down respectively.
The Subwoofer volume sets the balance of the Subwoofer with
the Soundbar. So the output level of the Subwoofer is adjusted
by both the main volume and the Subwoofer volume.

13

INPUT SELECTOR Button
Press this button to select INPUT 1, INPUT 2, or INPUT 3.

14

PAIRING Button
This is used to recover the wireless connection between the

Soundbar and the Subwoofer. Press and hold this button at
least 3 seconds until the PAIR indicator on the front panel
starts flashing. Then press the PAIRING button on the rear
panel of the Subwoofer. The two units should link back up.

15

INPUT 3
Connection type - 3.5 mm mini stereo. If your TV has a

headphone output, this is a primary input to use by using
the supplied 3.5 mm mini stereo cable.

16

INPUT 2
Connection Type - RCA. Use this input to connect with your

external devices (Blu-ray Players, DVD Players, CD Players,
MP3 Players, or Home Video Game Systems).

17

INPUT 1
Connection Type - RCA. If your TV does not have a

headphone output, use this input to connect with the
set-top-box by using the supplied RCA cable.

18

PAIR Indicator
Upon confirming the PAIR indicator on the front panel of the

Soundbar flashes, press the PAIRING button on this panel. It

will turn on when the wireless connection is recovered.

PAIRING Button

19

This is used to recover the wireless connection between

the Soundbar and the Subwoofer. Upon confirming the PAIR
indicator on the front panel of the Soundbar flashes, Press
this button. The two units should link back up.

POWER Button

Press this button to turn the
Soundbar on or off.

SURROUND Button

This button is used to select either
the FX SURROUND mode or the
STEREO mode.

SUBWOOFER VOLUME Buttons

Press the + or - button to adjust
the Subwoofer volume up or down
respectively.

Remote Control

MUTE Button

Press this button when you want
to activate the audio mute. Press it
again to deactivate the mute
function.

INPUT SELECTOR Button

Press this button to select
INPUT 1, INPUT 2, or INPUT 3.

MAIN VOLUME Buttons

Press the + or - button to adjust
the main volume up or down
respectively.

9

Setup Instructions

1. Unpack all the parts noted on page 5.

2. If your TV has a headphone output, plug the supplied 3.5 mm mini stereo cable into the headphone jack output of your TV and the
other end goes to the Input 3 jack on the back of your Soundbar (shown below).

This method will disable your TV’s sound system and allow direct control of the SBW100 Soundbar audio with your TV’s remote control.

3. If your TV does not have a headphone output and you are using a set top box, plug one end of the included RCA cable into the audio
outputs of your set top box and the other end into Input 1 on the back of your Soundbar. The SBW100 remote control and the control
buttons on the front panel of the Soundbar will always function no matter what the audio input source is.

[Note] Some TV's do not have a headphone output but do have Audio outputs with RCA jacks. You can connect them to Input 1 by
using the RCA cable. This will also work fine except that the SBW100 volume must now be adjusted using the SBW100 remote.

3.5 mm Mini Stereo Cable

Input 2

Input 1

L

R L

4. The remaining inputs (Input 2) can be attached to Blu-ray, DVD or CD players or to personal music players.

5. Install the table stands and plug the Soundbar power cord into the wall.

6. Find a convenient location in the room for the Subwoofer and plug its power cord into the wall.

7. The Soundbar and Subwoofer should automatically link together. Leave the Subwoofer on – it will go into a low power consumption
mode when not in use but will wake up automatically when a signal is present.

R

10

Wireless Link

Wireless Link

The Soundbar and Subwoofer should automatically link together. However, it is sometimes possible, in conditions of very high radio

interference (such as from microwave ovens or strong wireless network equipment), for the Soundbar and the Subwoofer to lose their
wireless link. In that case the Subwoofer will mute and the audio will sound weak (no bass).

To correct this, press and hold the PAIRING button on the back of the Soundbar at least 3 seconds until the PAIR indicator on the front
panel starts flashing.

PAIRING Button

Back of Soundbar

Then go to the back of the Subwoofer and press its PAIRING button. The two units should link back up and the PAIR indicator on the
Subwoofer turns on.
The PAIR indicator on the Soundbar will turn off, after the link between the Soundbar and the Subwoofer is established.

Soundbar Front Panel Controls / LED Indicators

PAIR Indicator

PAIR Indicator

Subwoofer Back Panel

Back of Subwoofer

[Note] You can leave the Subwoofer on – it will go into a low power consumption mode when not in use but will wake up automatically
when a signal is present.

PAIRING Button

11

Hookup Diagram

TV Audio Hookup - Case 1

If your TV has a headphone output, plug the supplied 3.5 mm mini stereo cable into the headphone output from your TV and
plug the other end to the Input 3 jack on the back of your Soundbar.

TV

To Headphone
output of TV

SBW100

3.5 mm Mini

Stereo Cable

(Supplied)

To Input 3 (Mini Stereo jack)
of SBW100

SBW100 Rear Connectors

TV Audio Hookup - Case 2

If your TV does not have a headphone output and you are using a set top box, plug one end of the included RCA cable into
the audio outputs from your set top box and plug the other end into Input 1 on the back of your Soundbar.

Set Top Box

TV

OR

To Audio Output
of Set Top Box or TV

RCA Cable

(Supplied)

[Note]
Some TV's do not have a headphone
output but do have Audio outputs with
RCA jacks. You can connect them to
Input 1 by using the RCA cable. This
will also work fine except that the
SBW100 volume must now be
adjusted using the SBW100 remote.

To Input 1 (RCA jack) of SBW100

SBW100 Rear Connectors

SBW100

Audio Hookup - Other Device

The Input 2 can be attached to Blu-ray, DVD or CD players. It can also be used to connect devices such as MP3 players or
Home Video Game systems.

Other Device

Blu-ray Players

DVD Players

CD Players

MP3 Players

Home Video Game Systems

To Audio Output

RCA Cable

To Input 2 (RCA jack) of SBW100

SBW100 Rear Connectors

12

SBW100

Specifications

SBW100 Specifications

Design

Soundbar

• 10-Driver Multi Reflectional Design

• Thick wall reinforced polymer

• Cloth Grill

• Wall Flush Mount Capable

Subwoofer

• Satin Black Sealed Enclosure

Performance Features

• Wide Frequency Response 35 ~ 20,000Hz

• 162 Watts RMS Total Power Output

• High Power ClassHDTM Amplifiers

• Low distortion VHR (Voltage Head Room)

Soundbar

• (8) 40 mm Long Throw Full Range Driver

• (2) 19 mm Aluminum Dome Tweeter

• 64 Watts Peak (32W x 2)

• 32 Watts RMS (16W x 2)

• Frequency Response 180 ~ 20,000Hz

Wireless Subwoofer

• (1) 6.5” Long Throw High BL Woofer

• 260 Watts Peak

• 130 Watts RMS @ 10% T.H.D.

• Frequency Response 35 ~ 180Hz

• 2.4GHz proprietary Audio Transmission System

• Automatic Plug-and-play Connection

• Only AC Power plug-in is required

• Wireless range: up to 100 feet - Clear line-of-sight

Inputs

• (2) RCA Stereo Connectors
(TV, DVD, DVRs, or Set-Top-Box)

• (1) 3.5 mm Stereo Mini Jack
(TV, MP3 Players)

• Power Input
Soundbar: AC 120V, 60Hz
Subwoofer: AC 120V, 60Hz

Convenience Features

• LED Display with Auto Dimming
(Volume, Mute, Surround Mode)

• Recessed Input Terminals for Flush Wall

• Mount Capability

• Table Stands included

Dimensions

Soundbar

• 781 mm (30-13/16”) width

• 96 mm (3-13/16”) height

• 50 mm (2”) depth

Subwoofer

• 150mm (5-15/16") width

• 510mm (20-1/8") height

• 257mm (10-1/8") depth

Weight

Soundbar

• 2.0 kg (4.3 lbs.)

Subwoofer

• 8.0 kg (17.7 lbs.)

General

• Operating Temperature: 5°C ~ 40°C
32°F ~ 104°F

• FCC Class B for Consumer Use

• Power Requirements
Soundbar: 100 ~ 130 VAC, 60Hz
Subwoofer: 100 ~ 130 VAC, 60Hz

• Power Consumption
Soundbar: 65W
Subwoofer: 130W

ClassHD is a trademark of Audera International Sales Inc.

All specifications, features and dimensions are subject to
change without notice.

13

Troubleshooting

If you encounter problems when using this Soundbar and Wireless Subwoofer Audio System, check the following points before requesting
service. If the problem remains unsolved, please call Hitachi Technical Support 1-888-885-2782.

In order to keep the warranty valid, please DO NOT try to repair the system yourself.

1. No power

1-1. Make sure power cords are securely connected to the AC outlet.

1-2. Make sure that there is power at the AC outlet.

1-3. Press the power button on the remote control or the front of the Soundbar.

2. No sound

2-1. Press the Volume + (Up) button on the remote control or the front of the Soundbar.

2-2. Make sure that you selected correct input (Input 1, Input 2, or Input 3).

2-3. Press MUTE on the remote to make sure the Soundbar is not muted.

2-4. Make sure audio cables are securely connected at the terminals of the Soundbar and the external devices.

3. No Bass

3-1. Make sure power cord of the Subwoofer is securely connected to the AC outlet.

3-2. Make sure that the PAIR Indicator on the back of the Subwoofer is ON. If not, please follow the instructions for the wireless
link that is on page 11 of this Owners Guide.

3-3. Make sure the Subwoofer and Soundbar are close enough for the wireless link to pair properly.

4. Buzzing or humming noise

4-1. Make sure audio cables are securely connected at the terminals of the Soundbar and the external devices.

4-2. Test on an alternate device or replace the audio cable.

4-3. Test the device and cable on an alternate input on the Soundbar.

5. The remote control does not work

5-1. Aim the remote control directly at the sensor on the front of the Soundbar.

5-2. Reduce the distance between the remote control and the Soundbar.

5-3. Make sure that the battery is inserted with its polarities (+/– signs) aligned as indicated.

5-4. Replace the battery.

6. The buttons on both the remote control and front panel do not work

6-1. Unplug the power cords of both the Soundbar and the Subwoofer from the AC outlet, and plug both of them back after a
few seconds.

14

Limited Warranty

HITACHI LIMITED PRODUCT WARRANTY

Product: SBW100

This HITACHI branded Product, as supplied and distributed by HITACHI and delivered new in the original carton to the original purchaser is
warranted by HITACHI against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on labor and
parts. However, there will only be a 90 day parts and labor limited warranty for commercial use.

Proof of purchase within one year from date of purchase in the form of a bill of sale, receipt or receipted invoice is the only acceptable
evidence the Product is within the limited warranty period. The bill of sale, receipt or receipted invoice must be presented as a pre-condition to
obtaining limited warranty service.

This limited warranty begins on the original date of purchase, and is valid only on Products purchased through HITACHI authorized dealers
and used in the United States, Canada, and Puerto Rico by the original purchaser. To receive warranty service, the purchaser must contact
the telephone number on this HITACHI limited product warranty statement for problem determination and service procedures. Warranty service
may only be performed by a duly authorized HITACHI service center. The original dated bill of sale, receipt or receipted invoice must be
presented upon request as proof of purchase to HITACHI or a HITACHI authorized service center.

HITACHI will repair or if repairs cannot be made, HITACHI will replace this Product at no charge if the Product is defective as specified in this
limited warranty during the limited warranty period. HITACHI may use new or remanufactured parts or products to repair or replace the
Product with a similar Product of equal or better quality at HITACHI’S sole discretion. All replaced parts and Products become the property of
HITACHI and must be returned to HITACHI. Replacement parts and Products assume the remaining original limited warranty of the product,
or ninety (90) days, whichever is longer.

Product freight, if applicable, needs to be prepaid by the original purchaser and shipped in either its original packaging or packaging affording
an equal degree of protection. HITACHI shall not be responsible for or obligated to replace damaged goods.

Upon notice from HITACHI that the Product was received with transportation damage, it is the responsibility of the original purchaser to file a
claim against the applicable carrier. HITACHI will only store the damaged Product for 30 days and reserves the right, at its sole discretion, to
dispose of the damaged Product or ship it back to the original purchaser at original purchaser’s expense after 30 days.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and, except to the extent otherwise
expressly provided for in this statement, noncommercial use of this Product, and shall not apply to the following, including, but not limited to:
consumable parts, such as batteries, unless damage has occurred as a result of a defect in materials and workmanship of the product; missing
batteries from Product, store display Products; Products sold as a “marked down” special, “close out”, “liquidation sale”, “clearance sale” or
Products sold in “as is” or "open box" condition; Products missing accessories; Products received with no fault found; Products damaged at
time of delivery to HITACHI; damage to Product which occurs in shipment; delivery and installation; applications and uses for which this
Product was not intended; altered Product; Products with altered/defaced serial numbers; cosmetic damage or exterior finish; accidents, abuse,
neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories,
applications, installations, repairs, external wiring or connectors not supplied or authorized by HITACHI which damage this Product or result in
service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,
cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction handbook or manual; reception
problems and audio distortion related to noise, echo, interference or other signal transmission and delivery problems. HITACHI does not
warrant uninterrupted or error-free operation of the Product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE. NO WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE SHALL APPLY AFTER THE WARRANTY PERIOD STATED ABOVE, AND NO OTHER EXPRESS WARRANTY
OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON
HITACHI. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED PRODUCT WARRANTY IS THE EXCLUSIVE REMEDY OF
THE ORIGINAL PURCHASER. HITACHI SHALL NOT BE LIABLE FOR ANY INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY APPLICABLE TO THIS PRODUCT; EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE FOR THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Any provision contained herein which is found contrary to state or local laws shall be deemed null
and void and the remaining provisions shall continue in full force and effect.

To obtain warranty service as provided for in this HITACHI LIMITED PRODUCT WARRANTY, please contact us at:

Phone: [phone]

15