How to install and remove parts
Adjusting the shelves
●
Pull up the back and pull out the shelf forward.
●
Set the refrigerator shelves by combining
with stored food.
Fresh Room
●
Remove the “Fresh Room” as shown below.
Do not store more than 4.9 kg in the
“Fresh Room” or it may be broken.
Lower Freezer Case
Lower Freezer Case is for large-sized food and those that
need to be stored over an extended time period.
Make sure food is stored below in the indication line.
●
Otherwise food touches the slide case above and it prevents
the door to be closed properly and cooling efficiency suffers.
Food and the slide case may be also damaged.
(Front)
Indication line for the
food storage section
Lower Freezer Case
Slide Case
How to use control panel
1.
Pull out the lower freezer compartment door,
and pull up toward you.
To remove slide case, lift it up as shown.
2.
Do not store more than 8.0 kg in upper
freezer case or it may be broken.
Pull out the vegetable compartment door, and lift up slide
case and vegetable case as shown ***.
Do not store more than 4.5 kg in the slide case
or it may be broken.
Vegetable Case
*** If R-door open, can’t pull out the Vegetable-case.
Freezer Compartment
Slide case
Door Pocket / Egg Pocket
Remove the door pocket as shown
Tap!Tap!
Vegetable Compartment
Slide Case
Do not store more than 12 kg
in the vegetable case or it
may be broken.
3.
o remove lower freezer case, lift it up as shown.
T
Do not store more than 10.5 kg in the
lower freezer case or it may be broken.
Lower Freezer Case
Tap ! Tap !
The Open Button is a touch panel made of glass. If you touch button, the current settings will be displayed.
The upper portion of the Open Button is the display and the lower portion is for setting.
Touch the lower portion of the Open Button to change the settings, if necessary.
Caution
Please close the door of the refrigerator door before changing the settings.
Providing information
Pg.
6
6
Pg.
Pg.
Display area
Setting area
7
Tank Empty
It will turn on while it is working in “eco” mode.
It will turn on while the Open Button is locked.
It will turn on when water in the water tank is getting low.
All the indicator lamps are lit for the sake of explanation.
First touch it.
Adjusting temperature s ettings
Set temperature for each
Normally,use the ”
Refrigerator
Freezer Compartment
Mid“ setting.
Pg.
Pg.
7
7
Setting an ice- maker
Set the ice making mode
“ON”
“OFF”
Pg.
Setting a cooling mode
Set a cooling mode
Quick Freezing
8
Energy Saving
Pg.
Pg.
Noti c e
About the display
If you confirm the setting, touch button or open
the refrigerator door. The display will be l it again.
If you touch button again after finishing
the operation, it will be unlit. The displayed characters
will be unlit 40 seconds later without touching
the button again for energy-saving. However,
the setting of “Energy Saving” mode, “Quick Freezing”
indicator lamps and “OFF” and “ Tank Empty ”
indicators and [“eco” operation indicator lamp]
will not be unlit.
When opening the refrigerator door and the displayed
characters are lit, they become unlit about 15 seconds
after closing it.
About the Open Button
Response of the touch panel may change depending
on the surrounding temperature, humidity, physical
condition of the user or operation status of the adjoining
electric product.
Release a finger and touch the panel again if
the panel does not respond after touching it.
False detection may occur (it may be kept pressed)
if the time interval between key touches is too short.
Response of the touch panel does not improve even
if you touch it strongly.
5
The panel may not respond if it is wet or dirty.
Wipe it off with a dry cloth.
6
Other Functions
1. Quick Freezing
When you want to freeze food or make ice quickly, use this function.
Touch “MENU” botton
Touch “Cooling Mode” button
to start Quick Freezing operation,
light is on
.
Quick Freezing
Touch “MENU” botton
Touch “Cooling Mode” 2 times
to stop Quick Freezing operation,
light is unlit
.
After 2 hours (approx.)
Quick freezing
operation will be
finished, light is unlit
.
5
(Continued)
Start Energy Saving
Touch “MENU” botton
Touch “Cooling Mode” button
to start Energy saving operation,
3. Door Alarm Functions
Cooling Mode
Quick Freezing
“Energy Saving” light is on.
Energy Saving
Stop Energy Saving
Touch “MENU” botton
Touch “Cooling Mode”
button 1st to stop “Energy
Saving” operation,
light is unlit.
Cooling Mode
Upon shipment, the alarm and sound are activated.
Unplugging and inserting the power plug or in the event of a power
failure the refrigerator will automatically reset the alarm and sound
to activated.
4. Child Lock
This can prevent erroneous operation of the Open Button or misuse by children. When this indicator lamp (Lock of the Open Button) is illuminated, any other portion
of the Open Button will not be activated by touching it.
button on the Open Button to turn on the indicator lamp.Touch
All indicator lamps turn on, and then the current settings are displayed.
1
Touch button 5 seconds or more until the preset sound is heard.
Lock of the Open Button is changed to “On” or “Off”.
2
It is set to [ ]“Off” before shipping.
Setting of the Open Button's lock
“ indicator lamp”
Preset sound
“On” (locked) “Off” (unlocked)
OffOn
Long beep PiPi
5. “eco” Operation indicator lamp
Noti c e
If [“eco” Operation indicator lamp] isn’t illuminated, check the following things.
࣭
Immediately after it is installed, or many foods are stored at a time
࣭
I
f the door is frequently opened / closed
࣭
If the door is not closed completely because any food/bag is wedged between the door and the body
of the refrigerator.
Quick Freezing is set.
࣭
“
eco”Operat ion
indicator lamp
6. Tank Empty
Tank Empty
“
Replenish the water tank with water. While the “Tank Empty” indicator lamp is on, the Ice Making function
doesn’t work even if the “ON” is set.
Noti c e
“
Tank Empty
of the Refrigerator Compartment is opened and closed while the indicator
lamp is on, and it turns on again if no water is added to replenish the water tank
“Tank Empty” indicator lamp remains off when “OFF” is selected for automatic ice making.
” indicator lamp turns comes on when water in water tank is getting low
” indicator lamp turns off once (for up to 3 hours) when the left door
Caution
“
Tank Empty
water tank
completely if the indicator lamp comes on.
7. Adjusting temperature in a refrigerator compartment
1
” may come on regardless of water level if the
is not placed properly. Push in the
Touch button on the Open Button to turn on the indicator lamp
All indicator lamps turn on, and then the current settings are displayed.
water tank
straight and
Ligh tON
Touch button to set the temperature as you like.
2
Each time you touch the button, the corresponding indicator lamp changes
in the order shown in the figure on the right.
The temperature is set to “ Mid ” before shipping.
Select “ Mid ” in ordinary usage. The temperature may change
depending on the operation states.
The above temperatures are standard values in the
Refrigerator Compartment under the condition that the
refrigerator is stable with no food stored and the door
closed, at ambient temperatures of 32ºC.
About 2〜5˚C
(Factory setting)
About 1〜3˚C
lower than “ Mid ”
About 1〜3˚C
higher than “ Mid ”
8. Adjusting temperature in a freezer compartment
Touch button on the Open Button to turn on the indicator lamp
1
2
All indicator lamps turn on, and then the current settings are displayed.
Touch button to set the temperature as you like.
Each time you touch the button, the corresponding indicator lamp changes
in the order shown in the figure on the right.
The temperature is set to “ Mid ” before shipping.
Select “ Mid ” in ordinary usage. The temperature may change
depending on the operation states.
Notice: For the Freezer Compartment ( “Max”Lower temperature freezer),
food is stored at a lower temperature than the conventional
freezer temperature. The energy consumption is approximately 20%
higher than that for the conventional freezer operation.
Notice
If operating the refrigerator for a long time with the Freezer
Compartment “Max” selected, ice cream etc. may become
hard or it may take a longer time to thaw food.
About -20 〜 -18˚C
(Factory setting)
About 1〜3˚C
lower than “ Mid ”
About 1〜3˚C
higher than “ Mid ”
7
Max
Min
flashing
The Control Panel does not respond:
The Control Panel
does not respond:
The Control Panel is unlit.
● Is “Child Lock” selected by using the lock function on the panel for operation?
● Is Refrigerator the compartment Door open? Operate after closing it.
● Is there water or dirt on the Control Panel?
● Are you touching a next button? Touch only one button at a time.
● Are you wearing gloves or applying a plaster?
● Approximately 40 seconds after the end of operation, Indicator LED become unlit (except “eco”, “Quick Freezing”, “Energy Saving”,
“Tank Empty”, “OFF”)
This flashing shows that there is a problem. Consult your dealer.
9
ֻྲ㠺ᐳ
11
⊦⫸
5
12
Mid Mid
1
2
庽妠ˬ怠╖˭㊱憽
ON
OFF
ON
OFF
ON
OFF
16
18
Loading...