HITACHI PW1L8LD5200E Service Manual

SM008

28LD5200E

(PW1L)

SERVICE MANUAL

Caution

Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful radiation
and materials, various measures are provided in this HITACHI LCD monitor.
Be sure to read cautionary items described in the manual to maintain safety before servicing.

Service Warning

1. Since Panel Module is made of glass, handling the broken Module shall be taken care suffi ciently in order
not to be injured.

2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become suffi ciently
cool.

3. Special care shall be taken to the display area in order not to damage its surface.

4. The Panel Module shall not be touched with bare hand to protect its surface from stains.

5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the dis­play area of the Panel Module but also a serviceman himself.

Contents

1. Features --------------------------------------------------3

2. Specifi cations --------------------------------------------4

3. Component names -------------------------------------5

4. Adjustment -----------------------------------------------6

5. Troubleshooting --------------------------------------- 19

6. Self diagnosis function ------------------------------ 22

7. Replacement parts list ------------------------------- 23

8. Block diagram ----------------------------------------- 24

9. Connection diagram --------------------------------- 26

10. Wiring diagram ---------------------------------------- 27

11. Disassembly diagram -------------------------------- 28

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

LCD Television

March 2004 Digital Media Division

28LD5000TA (PW1L)

CAUTION FOR SAFETY

Please read this page before repairing the monitor.
This page explains the following items to ensure the safety of set and prevent accidents
during repair work.

We explain by symbols what damage or injury may occur if errors are made.

Warning

Caution

We symbols below have the following meanings.

This symbol means "CAUTION"

This symbol means "POSSIBLE to

ELECTRIC SHOCK"

This symbol means "possible to cause death or serious injury"

This symbol means "possible to cause damage or something may break"

WARNING

Should follow instructions.

Indicates cabinet, chassis and parts

by label, which need special attention.

Please follow notes and Safety Instruc-

tions of User’s Manual.

Prevent electric shock.

Please take care during working because

monitor has high voltage part and power

supply part.

Possible to die if you touch these

places by mistake.

Please disconnect power plug during

overhaul, reassembly or changing parts.

You could die or suffer from electric

shock if you touch live part.

Use recommended components.

Please use same characteristic compo-

nent, which is same as original for your

safety and reliability.

marked by in parts list and circuit dia-

gram.

It may cause electric shock or fire if you

use non-recommended component.

Especially those

This symbol means "MUST"

This symbol means "DO NOT"

Should keep same style of wiring or component.

Monitor uses tubes or tapes, which are

insulators, and some components are

kept a distance from surface of PWB for

safety.

Internal leads kept from hot part or high volt-

age part by clamper or styling, so please

return to original condition to prevent elec-

tric shock or fire.

Should do safety check when finished.

Every part (removed screws, component

and wiring) should be returned to previous

condition.

Check around repair for possible

damage by mistake and measure the

insulated impedance by meg-ohm meter.

Confirm the value of impedance, that

value is more than 4M ohm.

It could cause electric shock or fire if this

value is less than 4M ohm.

Nobody can check and repair the code
and combination circuit of HDCP.

Never remove the shield case, which is

attached to the code and combination

circuit of HDCP.

2

28LD5200E (PW1L)

PRECAUTIONS

● How to clean the LCD screen panel of the monitor

Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.
To prevent scratching or damaging the LCD screen face, do not knock or rub the surface with sharp or hard
objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not
enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.

● How to clean the cabinet of the monitor

Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral
detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.
Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax,
glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.

1. Features

● Large-screen, high-definition LCD panel

The 28-inch color LCD panel, with a resolution of 1280 (H) x 768(V) pixels, creates a high-definition, large-screen
(aspect ratio : 15:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources
and ambient power lines, the panel produces high-quality display images free from color misconvergence and display
distortion.

● High Performance Digital Processor

A wide range of personal computer signals can be handled, from 640 x 400, 640 x 480 VGA to 1600 x 1200 UXGA.

(RGB Analog input)

● Easy-to-use remote control and on screen display system

The remote control included eases the work of setting display controls. Further, the on-screen display system,
displays the status of signal reception and display control settings in an easy-to-view fashion.

● Power saving system

The International ENERGY STAR power saver feature saves power consumption automatically when input sig­nals are not available.
When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.

● TruBass

TruBass, SRS and ( ) symbol are trademarks of SRS Labs,Inc.
TruBass technology is incorporated under license from SRS Labs, Inc.

● One mini D-sub terminal and one DVI-D terminal for RGB input
The D-sub terminal can also receive the RGB-component by On-Screen Display control.

● One composite/S.video input terminal and two component video input terminals.
One component input is possible to switch to RGB signal input from the Menu screen.

● One SCART terminal for the signal of the European standard.
It operates as composite/S.video input and RGB input terminal, or composite video output terminal.

● One composite video output terminal as a monitoring output.

● Various input/output terminals.

● Tuner and TELETEXT receiver.

● High performance type of the remote control.

3

2. Specifications

28LD5200E (PW1L)

Display

Panel

Net dimensions

Net weight

Ambient
conditions

Power supply

Power consumption/at standby

Audio output 12W + 12W (6 )

(RGB input)

Input signals

(Video input)

Input signals

Video output Signal

(RF input)

Input signals

dimensions

Resolution

Temperature

Relative humidity

Input terminals

Video signals

Sync signals

Input terminals

Video signals

Input terminals

RF Video System

Approx. 28 inches (599.04 (H) x 359.42 (V) mm)

1280 (H) x 768 (V) pixels

854 (W) x 516 (H) x 277 (D) mm

21.9kg

Operating : 5

Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)

AC100 - 240V, 50/60Hz

155W / <1W

RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)

0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60

H/V separate, TTL level [2K ]
H/V composite, TTL level [2K ]
Sync on green, 0.3 Vp-p [75 ]

AV1: composite video input terminal (RCA)
AV1: Y PB PR video input terminal (RCA)
AV1: L/R audio input terminal (RCA)
AV2: composite video input terminal (RCA)
AV2: Y/G PB/B PR/R video input terminal (RCA)
AV2: L/R audio input terminal (RCA)
AV3: composite video input terminal (RCA)
AV3: S video input terminal (RCA)
AV3: L/R audio input terminal (RCA)
AV4: composite video / S video / RGB / L/R audio input terminal (Scart)

AV1: PAL, SECAM, NTSC3.58, NTSC4.43
AV1: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
AV2: PAL, SECAM, NTSC3.58, NTSC4.43
AV2: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60, RGB
AV3: PAL, SECAM, NTSC3.58, NTSC4.43
AV4: PAL, SECAM, NTSC3.58, NTSC4.43
AV4: RGB

OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
AV4: composite video / L/R audio output terminal (SCART)

ANT : 75

PAL B, G, H / I / D, K SECAM B, G / D, K / K1

C to 35 C, Storage : 0 C to 60 C

Unbalanced

Applicable video signals for each input terminal

Terminal RCA/SCART DVI D-sub

Signal CVBS S-video Component RGB PC STB RGB Component

AV1

AV2

AV3

AV4

RGB1

RGB2

4

( :Available)

3. Component names

[ Main unit ]

28LD5200E (PW1L)

Control panel

These buttons are located on the top.

INPUT SELECT button
(OK button)

PROGRAM UP button
( SELECT button)

[ Remote Control ]

PROGRAM DOWN
button ( SELECT
button)

MENU button

( ) indicates the function while the MENU is displayed on the screen.

VOLUME
UP/DOWN
buttons
( ADJUST buttons)

SUB-POWER button

CLE-958

5

28LD5200E (PW1L)

4.Adjustment

● How to get to Adjustment mode

Using the front control buttons with the set turned off (standby) can activate it.

Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold

for more than 5 seconds.

The set turns on in adjustment mode with OSD.

● Changing data and Selecting Adjustment code

When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front

panel may be used as the adjustment keys.

, buttons are used for selecting adjustment code.

, buttons are used for changing data values.

OK button is used for confirming the data.

After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set

returns to normal condition.

● Memory Initialize operation

NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjust-

ment data will be lost.

Procedure

(1) Enter Adjustment Mode.

(2) Select MEMORY INIT adjustment code (No.704) and change the data value from 0 to 1.

(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.

(4) Select No.374 and change data value from 1 to 0.

(5) Check that the receiving channel goes to AV1. Unit is set to preset values.

6

28LD5200E (PW1L)

Service

ADJ.

No.

0 R DRIVE1 [TV/VIDEO/DSUB-COMP] COOL 255 230  O
1 G DRIVE1 [TV/VIDEO/DSUB-COMP] COOL 255 230  O
2 B DRIVE1 [TV/VIDEO/DSUB-COMP] COOL 255 255  O
3 R DRIVE2 [TV/VIDEO/DSUB-COMP] NORMAL 255 230  O
4 G DRIVE2 [TV/VIDEO/DSUB-COMP] NORMAL 255 230  O
5 B DRIVE2 [TV/VIDEO/DSUB-COMP] NORMAL 255 230  O
6 R DRIVE3 [TV/VIDEO/DSUB-COMP] WARM 255 230  O
7 G DRIVE3 [TV/VIDEO/DSUB-COMP] WARM 255 230  O
8 B DRIVE3 [TV/VIDEO/DSUB-COMP] WARM 255 230  O
9 R DRIVE4 [TV/VIDEO/DSUB-COMP] BLACK & WHITE 255 230  O

10 G DRIVE4 [TV/VIDEO/DSUB-COMP] BLACK & WHITE 255 230  O
11 B DRIVE4 [TV/VIDEO/DSUB-COMP] BLACK & WHITE 255 230  O
12 R DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 230  O
13 G DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 230  O
14 B DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 255  O
15 R DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 230  O
16 G DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 230  O
17 B DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 230  O
18 R DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 230  O
19 G DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 230  O
20 B DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 230  O
21 R DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 230  O
22 G DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 230  O
23 B DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 230  O
24 Black Level(RGB_AMP) TV/VIDEO 254
25 Black Level(RGB_AMP) PC 254 127
26 Reference Amplitude(RGB_AMP) TV/VIDEO 254 127
27 Reference Amplitude(RGB_AMP) PC 254 127
28 Display for Max. Amplitude Level Main - ­29 Display for Max. Amplitude Level SUB - ­30 SUB_CONTRAST(RF) MAIN 15 7
31 SUB_CONTRAST (AV1) MAIN/SUB COMPOSITE mode 15 7
32 SUB_CONTRAST(RF) SUB 15 7
33 SUB_CONTRAST (AV4) MAIN/SUB COMPOSITE mode 15 7
34 SUB_COLOR(VIDEO-PAL/SECAM) MAIN 15 0
35 SUB_COLOR(RF-PAL/SECAM) MAIN 15 3
36 SUB_COLOR(VIDEO-NTSC) MAIN 15 0
37 SUB_COLOR(RF-NTSC) MAIN 15 11
38 SUB_COLOR(VIDEO-PAL/SECAM) SUB 15 0
39 SUB_COLOR(RF-PAL/SECAM) SUB 15 3
40 SUB_COLOR(VIDEO-NTSC) SUB 15 0
41 SUB_COLOR(RF-NTSC) SUB 15 11
42 TINT(VIDEO) MAIN 63 33  O
43 TINT(RF) MAIN 63 33  O
44 TINT(VIDEO) SUB 63 33  O
45 TINT(RF) SUB 63 33  O
46 S_B-Y_ADJ MAIN 15 8
47 S_R-Y_ADJ MAIN 15 8
48 S_B-Y_ADJ SUB 15 8
49 S_R-Y_ADJ SUB 15 8
50 BPF_Q (4.43MHz) MAIN 3 3
51 BPF_f0 (4.43MHz) MAIN 3 1
52 Y_DL (4.5MHz) For Asia MAIN 10 5
53 Y_DL (5.5MHz PAL/NTSC4.43) For Asia MAIN 10 3
54 Y_DL (5.5MHz SECAM) For Asia MAIN 10 0
55 Y_DL (6.0PAL/NTSC4.43) For Asia MAIN 10 9
56 Y_DL (6.0SECAM) For Asia MAIN 10 9
57 Y_DL (VIDEO PAL/NTSC4.43) MAIN 10 6
58 Y_DL (VIDEO SECAM) MAIN 10 8
59 Y_DL (VIDEO NTSC) MAIN 10 6
60 BELL_f0 MAIN 1 0
61 Y_OUT_LEVEL (VIDEO) MAIN 63 13
62 Initialize function for EEPROM of Video PWB board 10
63 Y_OUT_LEVEL (TEXT) MAIN 63 0
64 C_OUT_LEVEL (VIDEO) MAIN 63 21
65 Check condition of EEPROM of Video PWB board 0:Normal, 1:Abnormal(Fail or no assembly) 1 ­66 C_OUT_LEVEL (TEXT) MAIN 63 0
67 Y_OUT_LEVEL (TEXT) SUB 63 12
68 Y_OUT_LEVEL (VIDEO) SUB 63 13
69 Dispersion Time of Sustain current 0: 2 Times, 1: 4 times For Dynamic (Day) mode 1 0
70 C_OUT_LEVEL (TEXT) SUB 63 7
71 C_OUT_LEVEL (VIDEO) SUB 63 21
72 Dispersion Time of Sustain current 0: 2 Times, 1: 4 times For Natural (Night) mode 1 1
73 BPF_Q (4.43MHz) SUB 3 3
74 BPF_f0 (4.43MHz) SUB 3 1
75 Y_DL (4.5MHz) For Asia SUB 10 5
76 Y_DL (5.5MHz PAL/NTSC4.43) For Asia SUB 10 2
77 Y_DL (5.5MHz SECAM) For Asia SUB 10 0
78 Y_DL (6.0PAL/NTSC4.43) For Asia SUB 10 7
79 Y_DL (6.0SECAM) For Asia SUB 10 10
80 Y_DL (VIDEO PAL/NTSC4.43) SUB 10 8
81 Y_DL (VIDEO SECAM) SUB 10 6
82 Y_DL (VIDEO NTSC) SUB 10 5
83 BELL_f0 SUB 1 0
84 C_TRAP_SW (COMB=OFF-PAL/NTSC4.43/NTSC3.58) MAIN 1 0
85 C_TRAP_SW (COMB=OFF-PAL/NTSC4.43/NTSC3.58) SUB 1 0
86 MVM(VIDEO) -10
87 AFC_GAIN (AV00) -30
88 AFC_GAIN (AV1) -30
89 AFC_GAIN (AV2) -30
90 AFC_GAIN (AV3) -30
91 AFC_GAIN (AV4) -30
92 S_INHBT -10
93 S_ID -10

adjustment items by I

Adjustment Items Mode

2

C-bus control

Function

Maximum

Value

O : Should be adjusted
 : Should be followed previous data

Changed Component

Formatter

PWB

VIDEO

PWB

Default

TUNER

PWB

LCD

PANEL

7

28LD5200E (PW1L)

O : Should be adjusted
 : Should be followed previous data

ADJ.

No.

94 S_GP -30
95 S_V_ID -10
96 BELL/HPF -33
97 Cb offset1 MAIN 15 8
98 Cr offset1 MAIN 15 8

99 Cb offset1 SUB 15 8
100 Cr offset1 SUB 15 8
101 Sharpness Gain(VIDEO) PAL MAIN 15 10
102 Sharpness Gain(RF) MAIN 15 5
103 Sharpness EQ(4.5MHz) MAIN 3 1
104 Sharpness EQ(5.5MHz) MAIN 3 1
105 Sharpness EQ(6.0/6.5MHz) MAIN 3 1
106 Sharpness EQ(VIDEO) MAIN 3 1
107 Sharpness f0(VIDEO) PAL MAIN 3 2
108 Sharpness f0(RF) MAIN 3 2
109 Sharpness Gain(VIDEO) PAL SUB 15 9
110 Sharpness Gain(RF) SUB 15 5
111 Sharpness EQ(4.5MHz) SUB 3 1
112 Sharpness EQ(5.5MHz) SUB 3 1
113 Sharpness EQ(6.0/6.5MHz) SUB 3 1
114 Sharpness EQ(VIDEO) SUB 3 1
115 Sharpness f0(VIDEO) PAL SUB 3 2
116 Sharpness f0(RF) SUB 3 2
117 LPF MAIN 1 0
118 LPF SUB 1 0
119 SECAM D-Trap MAIN/SUB 1 1
120 FILTER SW(RF) MAIN 1 0
121 FILTER SW(RF) SUB 1 0
122 NTSC Comb(Comb off) SUB 1 1
123 HS Phase MAIN 1 0
124 HS Phase SUB 1 0
125 P/N ID MAIN 1 0
126 P/N ID SUB 1 0
127 Y/C_SEP_MODE (COMB=OFF-PAL) - 3 0
128 Y-Pf0 -10
129 Y-EQ_GAIN -32
130 Y-EQ/N.C_LIM -30
131 Y-LPF -10
132 V-EMPH_GAIN -73
133 V-EMPH_N.L -73
134 V-EMPH_CORE -31
135 D RANGE -10
136 DY_GAIN MAIN NTSC mode 15 9
137 DC_GAIN MAIN NTSC mode 15 6
138 VAP_GAIN MAIN NTSC mode 7 5
139 VAP_INV MAIN NTSC mode 31 31
140 YH_CORE MAIN NTSC mode 3 0
141 YHCGAIN MAIN NTSC mode 1 1
142 CDL MAIN NTSC mode 7 3
143 YNRK MAIN NTSC mode 1 1
144 YNRINV MAIN NTSC mode 1 0
145 YNRLIM MAIN NTSC mode 3 1
146 CNRK 11
147 CNRINV 10
148 CNRLIM 31
149 YPFG 15 8
150 SEPA_LEVEL 480i/576i 3 2
151 SEPA_LEVEL 480p/576p 3 2
152 SEPA_LEVEL 1080i_50 3 2
153 SEPA_LEVEL 1080i_60/720p 3 2
154 AUTO_FM/AM(D11-D8) - 15 2
155 AUTO_FM/AM(D7-D0) - 254 189
156 A2_THRESHOLD(D11-D8) - 15 0
157 A2_THRESHOLD(D7-D0) - 254 112
158 PRE_AM Except 4.5MHz (Except Dual/Stereo mode) 254 17
159 VOL_SCART1 (D15-D8) - 254 115
160 VOL_SCART1 (D7-D5) - 7 0
161 PRE_SCART - 254 31
162 PRE_FM 4.5MHz(JAPAN) 254 34
163 PRE_FM 4.5MHz(Except BTSC-SAP mode) 254 32
164 PRE_FM 4.5MHz(BTSC-SAP) 254 60
165 PRE_FM 4.5MHz(Except KOREA-Dual/Stereo mode) 254 19
166 PRE_FM
167 PRE_FM Except 4.5MHz(Except Dual/Stereo mode) 254 17
168 PRE_FM Except 4.5MHz(Dual/Stereo mode) 254 27
169 PRE_NICAM - 254 57
170 Screen Saver-Picture shift amount 0:1pixel 1:2pixel 2:3pixel 20
171 Thermo sensor function available or not 0:None,1:Yes 10
172 Video Input function available or not at RGB1 & RGB2 mode 0:Not available, 1:Available 1 1
173 Screen Saver-Picture shift direction 0:dia 1:cross 2:up/down 3:left/right 30
174 AUDIO Function available 0:NO,1:YES 11
175 Remote Function available 0:NO,1:YES 11
176 Power Save On/Off Setting at Initialize,Reset and Shipping 0:Change 1: Don't Change 2 0
177 DVI-STB/RGB-COMPONENT Function available 0:NO,1:YES 10
178 Dynamic Backlight function 0:No, 1:Yes For LCD model 1 1
179 ISM Control for WVGA 11
180 Terminal Mode Function available 0:Not Available, 1:Available RS232C 1 0
181 Black insert function 0:Not available, 1:Available For Dynamic mode or Day mode (For LCD model only) 1 0
182 AGC_LEVEL AGCL ALL Mode 3 0
183 TEXT H sync delay - 127 0
184 TEXT V sync delay - 127 50
185 TEXT_H_POSITION - 254 42
186 TEXT_V_POSITION - 254 38
187 Lower Limits value for Sync Detect of 2ms interval For AFC at TV mode 254 25

Adjustment Items Mode

Function

Maximum

Default

Value

4.5MHz(KOREA-Dual/Stereo) 254 34

Changed Component

Formatter

PWB

VIDEO

PWB

TUNER

PWB

LCD

PANEL

8

28LD5200E (PW1L)

ADJ.

No.

188 Upper Limits Value for Sync Detect of 2ms interval For AFC at TV mode 254 40
189 Lower Limits value for Sync Detect of 2ms interval For Free Running at TV mode 254 30
190 Upper Limits Value for Sync Detect of 2ms interval For Free Running at TV mode 254 45
191 Lower Limits value for Sync Detect of 2ms interval For AUTO OFF at TV mode 254 25
192 Upper Limits Value for Sync Detect of 2ms interval For AUTO OFF at TV mode 254 35
193 Lower Limits value for Sync Detect of 2ms interval For Free Running at AV mode 254 30
194 Upper Limits Value for Sync Detect of 2ms interval For Free Running at AV mode 254 45
195 Counting time for discrimination of fV - 31 2
196 Dispersion Time of Sustain current 0: 2 Times, 1: 4 times For PC mode 1 1
197 Counting time for discrimination of SYNC - 31 2
198 Input Source of fV/fH judghment(0:M30625/TA1370) Component Mode 1 0
199 Counting time for discrimination of fV(M30625/TA1370) - 31 2
200 Y_DL (6.5MHz PAL/NTSC4.43) For Asia Main 10 7
201 Y_DL (6.5MHz SECAM) For Asia Main 10 10
202 Y_DL (6.5MHz PAL/NTSC4.43) For Asia Sub 10 4
203 Y_DL (6.5MHz SECAM) For Asia Sub 10 10
204 PDP-BLK ON/OFF 1:ON, 0:OFF 1 0
205 Counting time for discrimination of fH(M30625/TA1370) - 31 2
206 Sharpness f0(L) Sub 3 2
207 NJW1320_OUT1_GAIN VIDEO PWB 1 0
208 NJW1320_OUT2_GAIN VIDEO PWB 1 0
209 Sharpness f0(L') Sub 3 2
210 AFC_GAIN (Except AV00 mode) Except AV00 mode 3 0
211 Recovery to an error of OSC frequency of Ceramic resonator for timer 62 34
212 Brightness Center (CM) NT2/NT3/HD2/HD3/PAL2/PAL3/HD9/HD10/NT4/PAL4 254 128
213 Brightness Center (CM) HD1/HD4/HD5/HD6/HD7/HD8 254 128
214 Brightness Center (CM) MULTI PICTURE/NT1/PAL1 254 128
215 Reset function of accumulation time for WVGA/LCD Panel 0:Normal 1:Reset 1 0
216 Contrast Center (CM) Except WVGA & LCD TV/VIDEO(AV3/AV4 mode) 254 137
217 Power key function available or not (At Force AVC mode) 0:Available 1:Cannot 1 0
218 Color Center (CM) NT1/NT2/NT4/HD3/HD4/HD6/PAL4 127 46
219 Color Center (CM) PAL1/PAL2/HD8/HD9 127 50
220 Color Center (CM) NT3/HD1/HD2/HD5/PAL3/HD7/HD10 127 58
221 Tint Center (CM) PAL1 254 140
222 Tint Center (CM) NT1/NT2/NT4/HD3/HD4/HD6 254 130
223 Tint Center (CM) PAL2/HD8/HD10/PAL4 254 108
224 Tint Center (CM) NT3/HD1/HD2/HD5/PAL3/HD7/HD9 254 140
225 Center of Sharpness (HV Enhancer Gain for Y) For Europe TV 31 15
226 Center of Sharpness (HV Enhancer Gain for Y) For Europe VIDEO 31 15
227 Center of Sharpness (HV Enhancer Gain for Y) For Europe HD5/HD6 31 6
228 Center of Sharpness (HV Enhancer Gain for Y) For Europe HD1/HD4/HD7/HD8 31 10
229 Center of Sharpness (HV Enhancer Gain for Y) For Europe HD2/HD3/HD9/HD10 31 10
230 Center of Sharpness (HV Enhancer Gain for Y) For Europe NT2/NT3/PAL2/PAL3/NT4/PAL4 31 14
231 Center of Sharpness (HV Enhancer Gain for Y) For Europe TEXT(for split) 31 7
232 Maximum Value of Contrast at REAL/NORMAL mode 254 188
233 Offset Value of Contrast data at SPLIT mode 120 55
234 Offset value of gain for Black Stretch function Except OFF/LOW/HIGH mode 63 33
235 Demonstration [White] 0-3:None,4:0,5:+10W,6:+20W,7:+30W Mode(common) 7 5
236 Demonstration 0:Normal, 1:Peak Mode 1 1
237 Demonstration [Middle] 0:+0W,1:+10W,2:+20W,3:+30W Mode(common) 3 3
238 Demonstration 0:Normal, 1:Peak Mode 1 0
239 Horizontal Enhance TEXT 3 3
240 YNR Input Level at Low level for DVI-STV Mode 1080i-60/1080i-50/720p-60 7 2
241 YNR Input Level at Low level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 2
242 CNR Input Level at Low level for DVI-STV Mode 1080i-60/1080i-50/720p-60 7 2
243 CNR Input Level at Low level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 2
244 Vertical Enhance TEXT 3 3
245 Demonstration Mode 0:(Off), 1:(On) 10
246 WVGA sys_state For WVGA 1 0
247 WVGA BRIGHTNESS For WVGA 1 0
248 Enhancer gain of VH for C TEXT 31 0
249 YNR(NR) Input Level RF Mode 7 3
250 YNR Input Level at Low level for AV1-4 Mode VIDEO 7 3
251 YNR Input Level at Low level for AV1-4 Mode NT2/NT3/PAL2/PAL3/NT4/PAL4 7 3
252 YNR Input Level at Low level for AV1-4 Mode HD1/HD4/HD5/HD6/HD7/HD8 7 3
253 YNR Input Level at Low level for AV1-4 Mode HD2/HD3/HD9/HD10 7 3
254 CNR Input Level at Low level for AV1-4 Mode VIDEO 7 3
255 CNR Input Level at Low level for AV1-4 Mode NT2/NT3/PAL2/PAL3/NT4/PAL4 7 3
256 CNR Input Level at Low level for AV1-4 Mode HD1/HD4/HD5/HD6/HD7/HD8 7 3
257 CNR Input Level at Low level for AV1-4 Mode HD2/HD3/HD9/HD10 7 3
258 Heat APC function (HAPC) available 11
259 select(0:1.0 1:2.2 2:2.8) TV/VIDEO 2 1
260 select(0:1.0 1:2.2 2:2.8) DVI-PC/DVI-STB/DSUB-RGB 2 1
261 Select for APC function 10
262 "CCFMD" function TV/VIDEO 1 0
263 "CCFMD" function DVI-PC/DVI-STB/DSUB-RGB 1 0
264 NTSC/EBU(CCFORM) NT1/NT2/HD3/HD4/HD6/HD8/HD10/PAL1/PAL2 1 0
265 NTSC/EBU(CCFORM) TV/VIDEO/NT3/PAL3/HD1/HD2/HD5/HD7/HD9/NT4/PAL4 1 0
266 NTSC/EBU(CCFORM) DVI-PC/DVI-STB/DSUB-RGB 1 0
267 Correction for Tracking (DCBON) TV/VIDEO-Color Temp. : COOL 1 0
268 Correction for Tracking (DCBON) TV/AV-Col. Temp. : Nor/War 1 1
269 Correction for Tracking (DCBON) DVI-PC/DVI-STB/DSUB-RGB 1 1
270 Color Temp. Correction 32
271 Typical Value of Contrast OSD DYNAMIC 31 31
272 PC Power Save function (0:Impossible 1:Possible) 11
273 Waite Time for POWER SAVE function (s) VIDEO/PC 254 15
274 Lower Limits value for Sync Detect of 2ms interval For Power Save at AV mode 254 5
275 Upper Limits Value for Sync Detect of 2ms interval For Power Save at AV mode 254 200
276 Horizontal Position of OSD 60Hz 15 7
277 Vertical Position of OSD 60Hz 15 7
278 PinP Function 0:PinP, 1:Infomation1, 2:Infomaiton Split 20
279 Select for WIDE Mode 11
280 Temperature for Fun start (Temp_High) 254 58
281 Temperature for Fun stop (Temp_Low) 254 55

Adjustment Items Mode

Function

Maximum

Value

Default

O : Should be adjusted
 : Should be followed previous data

Changed Component

Formatter

VIDEO

TUNER

PWB

PWB

PWB

LCD

PANEL

9

28LD5200E (PW1L)

O : Should be adjusted
 : Should be followed previous data

ADJ.

No.

282 Display of internal temperature C°(Temperature) 125 ­283 Display of Panel map version 255 ­284 accumulation time for Panel (hours) 65535 ­285 Initialize function 0:Keep data, 1:Initialize No.0-No.23,30-33,42-45,289,293,294Adj No.741-743, 1 ­286 L standard PLL gating HIGH [Europe model] 10
287 Select for APC output [Except Europe model] Main FE 2 1
288 Q mode 0:Freeze, 1:Move 1, 2:Move 2 50Hz 2 1
289 AGC adjustment (MFE) [Except Europe model] MAIN 63 50  O
290 AGC adjustment (MFE) [Europe model] MAIN 63 20
291 AGC INPUT(MFE) MAIN - ­292 Q mode 0:Freeze, 1:Move 1, 2:Move 2 70Hz(PC) 2 0
293 SUB CONTRAST AV2 MAIN/SUB COMPOSITE mode 15 8
294 SUB CONTRAST AV3 MAIN/SUB COMPOSITE mode 15 8
295 Contrast Center (CM) Except WVGA & LCD AV2 254 137
296 Contrast Center (CM) Except WVGA & LCD AV1 254 137
297 Brightness center (CM) offset AV2 254 127
298 Brightness center (CM) offset AV1 254 127
299 Q mode 0:Freeze, 1:Move 1, 2:Move 2 60Hz 2 1
300 3D ON/OFF 0:ON,1:OFF(Through) 10
301 Input Select of TA1370 0:HD1/VD1,1:HD3/VD3 Main/Sub 1 0
302 Sharpness Gain(RF/NR) Main/Sub 15 3
303 3Line Y/C Main- Sub SW 0:Main, 1: Sub 1 0
304 Offset Value(+/-) of Upper Limit (for TB1274:SUB-CONT) Single Picture mode 18 2
305 Offset Value(+/-) of Upper Limit (for FC :RGB-AMP ) Multi Picture mode 18 2
306 Reference Amplitude(RGB_AMP) Multi Picture mode 254 90
307 Component Frq.(fH) Setup (0:28/31/33/45KHz,1:28/31/45KHz) 10
308 Terget value of White peak Adj. Single Picture mode 237 235
309 Sharpness Gain(S VIDEO) Main 15 7
310 Sharpness Gain(S VIDEO) Sub 15 7
311 Select color control (0: Asia, 1: South America) Main/Sub 1 0
312 Sharpness Gain Main(N-PAL) 15 8
313 Sharpness f0 Main(N-PAL) 32
314 Sharpness Gain Sub (N-PAL) 15 9
315 Sharpness f0 Sub (N-PAL) 32
316 Delay Time ON/OFF for Lipsync circuit 0:Off, 1:On 11
317 Sync Mode SW 70
318 Set Sound System at Auto mode of Sound Sys. (0:auto,1:4.5MHz) Main 1 0
319 Power condition at power save mode of PC mode after done RESET function 0:Keep last condition, 1:Return to normal condition 1 0
320 Switch to North USA model from Europe software. OSD change (Wide Mode,...) 0:For Europe, 1:Foe USA (DAY/NIGHT,...) 1 0
321 Count Souce for ON/OFF Timer 0:MCU-250ms, 1:AC-50/60Hz 1 0
322 Select Wide mode for Europe model (Normal= 5mode/ For Service= 10 mode) 0:Normal, 1:For service 1 0
323 Forced AVC type available 0:Normal type , 1: Forced AVC type 1 0
324 Sharpness Gain Main(M-PAL) 15 8
325 Sharpness f0 Main(M-PAL) 32
326 Sharpness Gain Sub (M-PAL) 15 9
327 Sharpness f0 Sub (M-PAL) 32
328 CNR Input Level at Low level for Dsub Comp. Mode NT2/NT3/PAL2/PAL3/NT4/PAL4 7 2
329 CNR Input Level at Low level for Dsub Comp. Mode HD1/HD4/HD5/HD6/HD7/HD8 7 2
330 CNR Input Level at Low level for Dsub Comp. Mode HD2/HD3/HD9/HD10 7 2
331 Sharpness Gain(VIDEO) NTSC3.58 MAIN 15 12
332 Sharpness f0(VIDEO) NTSC3.58 MAIN 3 2
333 Sharpness Gain(VIDEO) NTSC3.58 SUB 15 10
334 Sharpness f0(VIDEO) NTSC3.58 SUB 3 2
335 Sharpness Gain(VIDEO) SECAM,B/W MAIN 15 10
336 Sharpness f0(VIDEO) SECAM,B/W MAIN 3 2
337 Sharpness Gain(VIDEO) SECAM,B/W SUB 15 8
338 Sharpness f0(VIDEO) SECAM,B/W SUB 3 2
339 Sharpness Gain(VIDEO) NTSC4.43 MAIN 15 9
340 Sharpness f0(VIDEO) NTSC4.43 MAIN 3 2
341 Sharpness Gain(VIDEO) NTSC4.43 SUB 15 8
342 Sharpness f0(VIDEO) NTSC4.43 SUB 3 2
343 Brightness Limitted Function of PANEL [APSON] 11
344 VsVa WAIT TIMER [RISTIM] 15 5
345 Initial value of Contrast Panel life -Extend1 127 93
346 Interval time of correction time Panel life -Extend1 127 10
347 Additional value of Contrast Panel life -Extend1 127 1
348 Initial value of Contrast Panel life -Extend2 127 63
349 Interval time of correction time Panel life -Extend2 127 6
350 Additional value of Contrast Panel life -Extend2 127 1
351 L_PLL.GAIN 10
352 AS[YHECLPL0_P0] RF/Multi 15 2
353 AS[YHECLPL1_P0] NT1-except RF/PAL1-except RF 15 2
354 [YHECLPL2_P0] HD 15 1
355 AS[YHECLPL3_P0] NT2,3,4/PAL2,3,4 15 10
356 SEPA_LEVEL_DSUB 480i/576i 3 2
357 SEPA_LEVEL_DSUB 480p/576p 3 2
358 SEPA_LEVEL_DSUB 1080i_50 3 2
359 SEPA_LEVEL_DSUB 1080i_60/720p 3 2
360 HD-PHASE_DSUB 480i/576i 63 20
361 HD-PHASE_DSUB 480p/576p 63 20
362 HD-PHASE_DSUB 1080i_50 63 20
363 HD-PHASE_DSUB 1080i_60/720p 63 20
364 Y_DL (L) MAIN 10 4
365 Y_DL (L') MAIN 10 4
366 Y_DL (L) Sub 10 1
367 Y_DL (L') Sub 10 1
368 Sharpness Gain(L) MAIN 15 10
369 Sharpness Gain(L') MAIN 15 10
370 Sharpness Gain(L) SUB 15 8
371 Sharpness Gain(L') SUB 15 8
372 Sharpness f0(L) MAIN 3 2
373 Sharpness f0(L') MAIN 3 2
374 BURN-IN enable/ disenable 0:Disenable, 1:Enable 1 1
375 BURN-IN mode 22

Adjustment Items Mode

Function

Maximum

Value

Default

Changed Component

Formatter

PWB

VIDEO

PWB

TUNER

PWB

LCD

PANEL

10

28LD5200E (PW1L)

ADJ.

No.

376 CM_THRESHOLD (D15-D8) - 254 0
377 CM_THRESHOLD (D7 -D0) - 254 36
378 Sharpness Gain(RF M) MAIN 15 11
379 Sharpness Gain(RF M) Sub 15 11
380 Sharpness f0 (RF M) Main 3 2
381 Sharpness f0 (RF M) SUB 3 2
382 Counting value of 2ms Sync.Detect MAIN - ­383 Counting value of 2ms Sync.Detect SUB - ­384 TB1274 Read Data(00h) Main - ­385 TB1274 Read Data(01h) Main - ­386 TB1274 Read Data(00h) Sub - ­387 TB1274 Read Data(01h) Sub - ­388 MSP Read Data (CNTROL ) (D15-D8 ) -­389 MSP Read Data (CNTROL ) (D7 -D0 ) -­390 MSP Read Data (STANDARD_RES) (D15-D8 ) -­391 MSP Read Data (STANDARD_RES) (D7 -D0 ) -­392 MSP Read Data (STATUS ) (D15-D8 ) -­393 MSP Read Data (STATUS ) (D7 -D0 ) -­394 TA1370G Read Data(00h) Video board side - ­395 TA1370G Read Data(01h) Video board side - ­396 TA1370G Read Data(00h) Formater side - ­397 TA1370G Read Data(01h) Formater side - ­398 uPD64084 Read Data(00H) -­399 uPD64084 Read Data(01h) -­400 Language (Refer to below) 60
401 Hotel Mode(0:No,1:Yes) 10
402 Analog Data (0:Keep EEPROM,1:Not Keep to EEPROM) 10
403 Maximum Volume Limit 63 63
404 Power Mode(0:Last mode, 1:Pos1, 2:V1, 3:V2, 4:V3, 5:V4) 50
405 Channel Select(0:CCIR, 1:CHINA) 10
406 Auto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan) 20
407 T/TEXT(0: None, 1:Yes) 11
408 TEXT Language 70
409 IIC BUS Data/Clock Open(0:Close, 1:Open) 10
410 Channel Preset(0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM,4:AUSTRALIA) 41
411 Detect and Displsy Tele-Cinema (0:normal 1:Tele Cinema) -­412 V FREQ 60Hz Force (0:None, 1:Yes) Main/Sub 1 0
413 COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC,...) Main - ­414 COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC,...) Sub - ­415 Horizontal Filter SW [HHPF0] NTSC 1 0
416 Enhancer Gain [HHPF1] PAL 1 0
417 Enhancer Gain [HHPF2] HD 1 0
418 Horizontal Coring Level(Enhancer Gain) AS[HECOR0_PO] NT1-RF 15 1
419 Horizontal Coring Level(Enhancer Gain) AS[HECOR1_PO] PAL1-RF/Multi 15 1
420 Horizontal Coring Level(Enhancer Gain) [HECOR2_PO] NT1-Video 15 1
421 Horizontal Coring Level(Enhancer Gain) [HECOR3_PO] PAL1-Video 15 1
422 Horizontal Coring Level(Enhancer Gain) [HECOR4_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 0
423 Horizontal Coring Level(Enhancer Gain) [HECOR5_PO] HD2/HD3/HD9/HD10 15 1
424 Horizontal Coring Level(Enhancer Gain) [HECOR6_PO] HD1/HD4/HD5/HD6/HD7/HD8 15 0
425 Horizontal Coring Level(Enhancer Gain) [HECORPC_PO] PC 15 1
426 Horizontal Coring Level(Enhancer Gain) EU[HECORE_PO] PAL1-RF/multi 15 1
427 Vertical Coring Level(Enhancer Gain) AS[VECOR0_PO] NT1-RF 15 1
428 Vertical Coring Level(Enhancer Gain) AS[VECOR1_PO] PAL1-RF/multi 15 1
429 Vertical Coring Level(Enhancer Gain) [VECOR2_PO] NT1-Video 15 1
430 Vertical Coring Level(Enhancer Gain) [VECOR3_PO] PAL1-Video 15 1
431 Vertical Coring Level(Enhancer Gain) [VECOR4_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 0
432 Vertical Coring Level(Enhancer Gain) [VECOR5_PO] HD2/HD3/HD9/HD10 15 0
433 Vertical Coring Level(Enhancer Gain) [VECOR6_PO] HD1/HD4/HD5/HD6/HD7/HD8 15 0
434 Vertical Coring Level(Enhancer Gain) [VECORPC_PO] PC 15 0
435 Vertical Coring Level(Enhancer Gain) EU[VECORE_PO] PAL1-RF/multi 15 0
436 Horizontal Coring Level(Enhancer Gain) AS[HECOR0_P1] NT1-RF 15 1
437 Horizontal Coring Level(Enhancer Gain) AS[HECOR0_P2] PAL1-RF/multi 15 1
438 Horizontal Coring Level(Enhancer Gain) [HECOR0_P3] NT1-Video 15 0
439 Horizontal Coring Level(Enhancer Gain) [HECOR0_P4] PAL1-Video 15 1
440 Horizontal Coring Level(Enhancer Gain) [HECOR0_P5] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 0
441 Horizontal Coring Level(Enhancer Gain) [HECOR0_P6] HD2/HD3/HD9/HD10 15 1
442 Horizontal Coring Level(Enhancer Gain) [HECOR0_P7] HD1/HD4/HD5/HD6/HD7/HD8 15 1
443 Horizontal Coring Level(Enhancer Gain) [HECORPC_P1] PC 15 1
444 Horizontal Coring Level(Enhancer Gain) EU[HECORE_P1] PAL1-RF/multi 15 1
445 Vertical Coring Level(Enhancer Gain) AS[VECOR0_P1] NT1-RF 15 1
446 Vertical Coring Level(Enhancer Gain) AS[VECOR0_P2] PAL1-RF/multi 15 1
447 Vertical Coring Level(Enhancer Gain) [VECOR0_P3] NT1-Video 15 1
448 Vertical Coring Level(Enhancer Gain) [VECOR0_P4] PAL1-Video 15 1
449 Vertical Coring Level(Enhancer Gain) [VECOR0_P5] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 1
450 Vertical Coring Level(Enhancer Gain) [VECOR0_P6] HD2/HD3/HD9/HD10 15 15
451 Vertical Coring Level(Enhancer Gain) [VECOR0_P7] HD1/HD4/HD5/HD6/HD7/HD8 15 0
452 Vertical Coring Level(Enhancer Gain) [VECORPC_P1] PC 15 0
453 Vertical Coring Level(Enhancer Gain) EU[VECORE_P1] PAL1-RF/multi 15 0
454 YFRNR Input Gain (Main) 2pictures [MYNRG0] except HD-HD 7 1
455

*&065%*&2#.UWD=/;04)?

456

RKEVWTGU=/;04)?

457 [MYNRG3] HD-* 7 4
458 YFRNR Input Gain(Sub) [YCNRG0] 2pictures 7 4
459 [YCNRG1] 4pictures/12pictures 7 1
460 CFRNR Input Gain 8Main) 2pictures [MCNRG0] except HD-HD 7 3
461 <HD-NTSC,HD-PAL(Sub) [MCNRG1] HD-HD 7 4
462 [MCNRG2] 74
463 [MCNRG3] HD-* 7 4
464 CFRNR Input Gain [SCNRG0] 2pictures 7 3
465 [SCNRG1] 4pictures/12pictures 7 4
466 YFRNR Transition Level [MYNRP0] NT1/PAL1/multi 7 1
467 [MYNRP5] NT1/PAL1-Video 7 0
468 [MYNRP6] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 0
469 [MYNRP7] HD2/HD3/HD9/HD10 7 0

Adjustment Items Mode

Function

Maximum

Default

Value

HD-HD 7 4
NT-*/PAL-* 7 1

O : Should be adjusted
 : Should be followed previous data

Changed Component

Formatter

VIDEO

TUNER

PWB

PWB

PWB

LCD

PANEL

11

28LD5200E (PW1L)

O : Should be adjusted
 : Should be followed previous data

ADJ.

No.

470 [MYNRP8] HD1/HD4/HD5/HD6/HD7/HD8 7 0
471 YFRNR Transition Level (Main/Sub) [MCNRP0] NT1/PAL1/multi 7 2
472 [MCNRP5] NT1/PAL1-video 7 2
473 [MCNRP6] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 2
474 [MCNRP7] HD2/HD3/HD9/HD10 7 2
475 [MCNRP8] HD1/HD4/HD5/HD6/HD7/HD8 7 0
476 Vertical Enhancer [YVEG0_P0] NTSC/PAL(-except RF) 15 8
477 [YVEG1_P0] HD2/HD3/HD9/HD10 15 12
478 [YVEG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 15 8
479 AS[YVEG3_P0] PAL1-RF/multi 15 8
480 EU[YVEG0_E_P0] PAL1-RF/multi 15 8
481 Vertical RGB Gain For Y/G [YVDSBG0_P0] NTSC/PAL/multi 3 0
482 [YVDSBG1_P0] HD2/HD3/HD9/HD10 3 0
483 [YVDSBG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 0
484 Vertical RGB Coring For Y/G [YVDSBG0_P0] NTSC/PAL/multi 7 0
485 [YVDSBG1_P0] HD 7 3
486 Vertical Enhancer Clip for Y/G [YVECLP0_P0] NTSC/PAL/multi 1 1
487 [YVECLP1_P0] HD 1 1
488 Vertical Clip Offset level [YVECLP0_P0] NTSC/PAL/multi 15 7
489 [YVECLP1_P0] HD 15 1
490 Vertical Non Linear Peaking for Y/G [YVNLP0_P0] NTSC/PAL/multi 63 0
491 [YVNLP1_P0] HD 63 0
492 Horizontal HPF Peak Freq SW for Y/G [YHHPF0_P0] NTSC/PAL/multi 3 2
493 [YHHPF1_P0] HD2/HD3/HD9/HD10 3 1
494 [YHHPF2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 1
495 Horizontal Enhancer Gain for Y/G [YHEG0_P0] NTSC/PAL(except -RF) 15 15
496 [YHEG1_P0] HD2/HD3/HD9/HD10 15 15
497 [YHEG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 15 0
498 AS[YHEG3_P0] PAL1-RF/multi 15 15
499 EU[YHEG0_E_P0] PAL1-RF/multi 15 15
500 Hrozontal DSB Gain for Y/G [YHDSBG0_P0] NTSC/PAL/multi 3 3
501 [YHDSBG1_P0] HD2/HD3/HD9/HD10 3 0
502 [YHDSBG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 0
503 Horizontal DSB Coring for Y/G [YHDSBC0_P0] NTSC/PAL/multi 7 1
504 [YHDSBC1_P0] HD 7 0
505 Horizontal Enhancer Clip for Y/G [YHECLP0_P0] NTSC/PAL/multi 1 0
506 [YHECLP1_P0] HD 1 0
507 Horizontal Clip Offset Level for Y/G AS[YHECLPL0_P0] RF/multi 15 2
508 AS[YHECLPL1_P0] NT1-except RF/PAL1-except RF 15 2
509 [YHECLPL2_P0] HD 15 1
510 EU[YHECLPL0_E_P0] RF/multi 15 4
511 EU[YHECLPL1_E_P0] NT1-except RF/PAL1-except RF 15 4
512 Horizontal Non Linear Peaking for Y/G [YHNLP0_P0] NTSC/PAL/multi 63 0
513 [YHNLP1_P0] HD 63 0
514 Coring Amplitude for Y/G [YCOR0_PO] NT1-RF/PAL1-RF/multi 7 7
515 [YCOR1_PO] NT1-Video/PAL1-Video 7 5
516 [YCOR2_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 3
517 [YCOR3_PO] HD2/HD3/HD9/HD10 7 1
518 [YCOR4_PO] HD1/HD4/HD5/HD6/HD7/HD8 7 1
519 Vertical Enhancer Gain for Y/G [YVEG0_P1] NTSC/PAL(-RFએᄖ)1515
520 [YVEG1_P1] HD2/HD3/HD9/HD10 15 4
521 [YVEG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 15 15
522 AS[YVEG3_P1] PAL1-RF/multi 15 15
523 EU[YVEG0_E_P1] PAL1-RF/multi 15 15
524 Vertical DSB Gain for Y/G [YVDSBG0_P1] NTSC/PAL/multi 3 3
525 [YVDSBG1_P1] HD2/HD3/HD9/HD10 3 0
526 [YVDSBG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 2
527 Vertical DSB Coring for Y/G [YVDSBC0_P1] NTSC/PAL/multi 7 7
528 [YVDSBC1_P1] HD 7 0
529 Vertical Enhancer Clip for Y/G [YVECLP0_P1] NTSC/PAL/multi 1 1
530 [YVECLP1_P1] HD 1 0
531 Vertical Clip Offset Level for Y/G [YVECLP0_P1] NTSC/PAL/multi 15 15
532 [YVECLP1_P1] HD 15 8
533 Vertical Non Linear Peaking for Y/G [YVNLP0_P1] NTSC/PAL/multi 63 0
534 [YVNLP1_P1] HD 63 0
535 Horizontal HPF Pead Freq SW for Y/G [YHHPF0_P1] NTSC/PAL/multi 3 2
536 [YHHPF1_P1] HD2/HD3/HD9/HD10 3 2
537 [YHHPF2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 2
538 Horizontal Enhancer Gain for Y/G [YHEG0_P1] NTSC/PAL(except-RF) 15 15
539 [YHEG1_P1] HD2/HD3/HD9/HD10 15 15
540 [YHEG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 15 15
541 AS[YHEG3_P1] PAL1-RF/multi 15 15
542 EU[YHEG0_E_P1] PAL1-RF/multi 15 15
543 Horizontal DSB Gain for Y/G [YHDSBG0_P1] NTSC/PAL/multi 3 2
544 [YHDSBG1_P1] HD2/HD3/HD9/HD10 3 0
545 [YHDSBG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 2
546 Horizontal DSB Coaring for Y/G [YHDSBC0_P1] NTSC/PAL/multi 7 7
547 [YHDSBC1_P1] HD 7 7
548 Horizontal Enhancer Clip for Y/G [YHDSBC0_P1] NTSC/PAL/multi 1 0
549 [YHDSBC1_P1] HD 1 0
550 Horizontal Clip Offset Level for Y/G AS[YHCLPL0_P1] RF/multi 15 4
551 AS[YHCLPL1_P1] except NT1-RF/PAL1-except RF 15 4
552 [YHECLPL2_P1] HD 15 5
553 EU[YHECLPL0_E_P1] RF/multi 15 4
554 EU[YHECLPL1_E_P1] NT1-except RF/PAL1-except RF 15 4
555 Horizontal Non Linear Peaking for Y/G [YHNLP0_P1] NTSC/PAL/multi 63 0
556 [YHNLP1_P1] HD 63 0
557 Coring Amplitude for Y/G [YC0R0_P1] NT1-RF/PAL1-RF/multi 7 7
558 [YC0R1_P1] NT1-video/PAL1-video 7 4
559 [YC0R2_P1] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 3
560 [YC0R3_P1] HD2/HD3/HD9/HD10 7 2
561 [YC0R4_P1] HD1/HD4/HD5/HD6/HD7/HD8 7 4
562 Vertical enhancer Gain for B-Y/B, R-Y/R [CVEG0] NTSC/PAL/multi 15 15
563 [CVEG1] HD 15 9

Adjustment Items Mode

Function

Maximum

Value

Default

Changed Component

Formatter

PWB

VIDEO

PWB

TUNER

PWB

LCD

PANEL

12

28LD5200E (PW1L)

ADJ.

No.

564 DSB Gain of Vertical for B-Y/B,R-Y/R [CVDSBG0] NTSC/PAL/multi 3 0
565 [CVDSBG1] HD 3 0
566 DSB coring of Vertical for B-Y/B,R-Y/R [CVDSBC0] NTSC/PAL/multi 7 0
567 [CVDSBC1] HD 7 0
568 Vertical enhancer Clip for B-Y/B, R-Y/R [CVECLP0] NTSC/PAL/multi 1 0
569 [CVECLP1] HD 1 0
570 Horizontal HPF Peak Freq. SW for B-Y/B, R-Y/R [CHHPF0] NTSC/PAL/multi 3 2
571 [CHHPF1] HD 3 2
572 Horizontal Enhancer Gain for B-Y/B, R-Y/R [CHEG0] NTSC/PAL/multi 15 15
573 [CHEG1] HD 15 9
574 Horizontal DSB Gain for B-Y/B, R-Y/R [CHDSBG0] NTSC/PAL/Multi Picture 3 0
575 [CHDSBG1] HD 3 0
576 Horizontal DSB Coring for B-Y/B, R-Y/R [CHDSBC0] NTSC/PAL/Multi Picture 7 0
577 [CHDSBC1] HD 7 0
578 Horizontal Enhancer Clip fo B-Y/B, R-Y/R [CHECLP0] NTSC/PAL/Multi Picture 1 0
579 [CHECLP1] HD 1 0
580 Coring Amplitude for B-Y/B, R-Y/R [CC0R0] NTSC/PAL/Multi Picture 7 1
581 [CC0R1] HD 7 1
582 B-Y Clamp offset [Except D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
583 R-Y Clamp offset [Except D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
584 B-Y Clamp offset [Except D Sub Component] HD1/4,HD7/8 255 128
585 R-Y Clamp offset [Except D Sub Component] HD1/4,HD7/8 255 128
586 B-Y Clamp offset [Except D Sub Component] HD5/6 255 128
587 R-Y Clamp offset [Except D Sub Component] HD5/6 255 128
588 B-Y Clamp offset [D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
589 R-Y Clamp offset [D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
590 B-Y Clamp offset [D Sub Component] HD1/4,HD7/8 255 128
591 R-Y Clamp offset [D Sub Component] HD1/4,HD7/8 255 128
592 B-Y Clamp offset [D Sub Component] HD5/6 255 128
593 R-Y Clamp offset [D Sub Component] HD5/6 255 128
594 B-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128
595 R-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128
596 B-Y Clamp offset [DVI-STB] 1080i-50/1080i-60 255 128
597 R-Y Clamp offset [DVI-STB] 1080i-50/1080i-60 255 128
598 B-Y Clamp offset [DVI-STB] 720p-60 255 128
599 R-Y Clamp offset [DVI-STB] 720p-60 255 128
600 Y OUT LEVEL M (4.5) For Asia Main 63 15
601 Y OUT LEVEL B/G (5.5) For Asia Main 63 13
602 Y OUT LEVEL D/K (6.5) For Asia Main 63 16
603 Y OUT LEVEL I (6.0) For Asia Main 63 14
604 Y OUT LEVEL B/G (5.5) For Europe Main 63 13
605 Y OUT LEVEL D/K (6.5) For Europe Main 63 16
606 Y OUT LEVEL I (6.0) For Europe Main 63 19
607 Y OUT LEVEL L (6.5) For Europe Main 63 13
608 Y OUT LEVEL L' (6.1) For Europe Main 63 12
609 Y OUT LEVEL M (4.5) For US Main 63 13
610 C OUT LEVEL M (4.5) For Asia Main 63 7
611 C OUT LEVEL B/G (5.5) For Asia Main 63 13
612 C OUT LEVEL D/K (6.5) For Asia Main 63 13
613 C OUT LEVEL I (6.0) For Asia Main 63 13
614 C OUT LEVEL B/G (5.5) For Europe Main 63 8
615 C OUT LEVEL D/K (6.5) For Europe Main 63 8
616 C OUT LEVEL I (6.0) For Europe Main 63 3
617 C OUT LEVEL L (6.5) For Europe Main 63 8
618 C OUT LEVEL L' (6.1) For Europe Main 63 8
619 C OUT LEVEL M (4.5) For US Main 63 13
620 Y OUT LEVEL M (4.5) For Asia Sub 63 14
621 Y OUT LEVEL B/G (5.5) For Asia Sub 63 13
622 Y OUT LEVEL D/K (6.5) For Asia Sub 63 15
623 Y OUT LEVEL I (6.0) For Asia Sub 63 13
624 Y OUT LEVEL B/G (5.5) For Europe Sub 63 13
625 Y OUT LEVEL D/K (6.5) For Europe Sub 63 16
626 Y OUT LEVEL I (6.0) For Europe Sub 63 20
627 Y OUT LEVEL L (6.5) For Europe Sub 63 13
628 Y OUT LEVEL L' (6.1) For Europe Sub 63 13
629 Y OUT LEVEL M (4.5) For US Sub 63 13
630 C OUT LEVEL M (4.5) For Asia Sub 63 7
631 C OUT LEVEL B/G (5.5) For Asia Sub 63 13
632 C OUT LEVEL D/K (6.5) For Asia Sub 63 13
633 C OUT LEVEL I (6.0) For Asia Sub 63 13
634 C OUT LEVEL B/G (5.5) For Europe Sub 63 13
635 C OUT LEVEL D/K (6.5) For Europe Sub 63 13
636 C OUT LEVEL I (6.0) For Europe Sub 63 13
637 C OUT LEVEL L (6.5) For Europe Sub 63 13
638 C OUT LEVEL L' (6.1) For Europe Sub 63 13
639 C OUT LEVEL M (4.5) For US Sub 63 13
640 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model)) DVI-PC 254 128
641 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model)) DVI-STB (With Setup) 254 149
642 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model)) DVI-STB (Without Setup) 254 128
643 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model)) DSUB-RGB 254 128
644 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model)) Expand DSUB-RGB (Reserved) 254 128
645 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model)) DSUB-COMP 254 137
646 Brightness Center (CM) DVI-PC 254 128
647 Brightness Center (CM) DVI-STB 254 128
648 Brightness Center (CM) DSUB-RGB 254 128
649 Brightness Center (CM) Expand DSUB-RGB (Reserved) 254 128
650 Brightness Center Offset DSUB-COMP 254 127
651 Color Center (CM) DVI-PC 127 64
652 Color Center (CM) DVI-STB (480i/576i/480p/576p) 127 62
653 Color Center (CM) DVI-STB (720p-60/1080i-60/1080i-50 127 62
654 Color Center (CM) DVI-STB (VGA) 127 62
655 Color Center (CM) DSUB-RGB 127 64
656 Tint Center (CM) DVI-PC 254 128
657 Tint Center (CM) DVI-STB (480i/576i/480p/576p) 254 128

Adjustment Items Mode

Function

Maximum

Value

O : Should be adjusted
 : Should be followed previous data

Changed Component

Formatter

PWB

VIDEO

PWB

Default

TUNER

PWB

LCD

PANEL

13

28LD5200E (PW1L)

O : Should be adjusted
 : Should be followed previous data

ADJ.

No.

658 Tint Center (CM) DVI-STB (720p-60/1080i-60/1080i-50 254 128
659 Tint Center (CM) DVI-STB (VGA) 254 128
660 Tint Center (CM) DSUB-RGB 254 128
661 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (480i/576i) 31 14
662 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (480p/576p) 31 10
663 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (720p-60) 31 6
664 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (1080i-60/1080i-50) 31 10
665 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (VGA) 31 10
666 DVI-STB Setup 0:None VGA/Others Yes, 1:All none 2:All have DVI-STB mode 2 0
667 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) DVI-PC 1 0
668 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) DVI-STB 1 0
669 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) AVC 1 0
670 Offset level of Horizontal CLIP for Y/G AS[YHECLPL3_P0] NT2~4/PAL2~4 15 10
671 EU[YHECLPL3_E_P0] NT2~4/PAL2~4 15 10
672 Offset level of Horizontal CLIP for Y/G AS[YHCLPL3_P1] NT2~4/PAL2~4 15 15
673 EU[YHECLPL3_E_P1] NT2~4/PAL2~4 15 15
674 Y_DL (4.5MHz) For US Main 10 7
675 Y_DL (4.6MHz) For US Sub 10 7
676 Y_DL (5.5MHz PAL/NTSC4.43) For Europe Main 10 4
677 Y_DL (5.5MHz SECAM) For Europe Main 10 1
678 Y_DL (6.0PAL/NTSC4.43) For Europe Main 10 8
679 Y_DL (6.0SECAM) For Europe Main 10 5
680 Y_DL (5.5MHz PAL/NTSC4.43) For Europe Sub 10 2
681 Y_DL (5.5MHz SECAM) For Europe Sub 10 0
682 Y_DL (6.0PAL/NTSC4.43) For Europe Sub 10 4
683 Y_DL (6.0SECAM) For Europe Sub 10 0
684 Y_DL (6.5MHz PAL/NTSC4.43) For Europe Main 10 5
685 Y_DL (6.5MHz SECAM) For Europe Main 10 5
686 Y_DL (6.5MHz PAL/NTSC4.43) For Europe Sub 10 2
687 Y_DL (6.5MHz SECAM) For Europe Sub 10 0
688 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US TV 31 15
689 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US VIDEO 31 15
690 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD5/HD6 31 6
691 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD1/HD4/HD7/HD8 31 10
692 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD2/HD3/HD9/HD10 31 10
693 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US NT2/NT3/PAL2/PAL3/NT4/PAL4 31 14
694 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US TEXT(2pictures) 31 15
695 Contrast mode<Dynamic> SW (TV) 0:Dynamic 1:Dynamic+Auto TV 1 1
696 V detection(FORMATTER PWB) 0:out of range 128: NO V (or out of spec) 255interrupt 50/60Hz 255 ­697 H detection(FORMATTER PWB) 0:out of range 128: NO V (or out of spec) 255interrupt 15/28/31/33/45kHz 255 ­698 V detection (VIDEO PWB) 0:out of range 128:NO V 255 interrupt 50/60Hz 255 ­699 H detection (VIDEO PWB) 0:out of range 128:NO V 255 interrupt 15/28/31/33/45kHz 255 ­700 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 55V 50Hz[Natural/Night] mode 2 1
701 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 55V 60Hz[Natural/Night] mode 2 1
702 Dispersion Time of Sustain current 0: 2 Times, 1: 4 times For PC-Movie mode 1 1
703 SMPLING For CCD 255 0
704 POLLING For CCD 255 15
705 START For CCD 7 2
706 TIMEOUT For CCD 30 5
707 STATUS For CCD 7 2
708 CCD-HP For CCD 79 40
709 CCD-CLK For CCD 79 57
710 Sharpness Gain For Main 480i/576i 15 10
711 Sharpness EQ For Main 480i/576i 3 1
712 Sharpness f0 For Main 480i/576i 3 1
713 Cb Offset1 For Main 480i/576i 15 8
714 Cr Offset1 For Main 480i/576i 15 8
715 Y out level For Main 480i/576i 63 15
716 C out level For Main 480i/576i 63 15
717 Sharpness Gain For Sub 480i/576i 15 10
718 Sharpness EQ For Sub 480i/576i 3 1
719 Sharpness f0 For Sub 480i/576i 3 1
720 Cb Offset1 For Sub 480i/576i 15 8
721 Cr Offset1 For Sub 480i/576i 15 8
722 Y out level For Sub 480i/576i 63 15
723 C out level For Sub 480i/576i 63 15
724 Offset value of adjusted TINT for impact to No.42-45 For COMPAL factory 20 11
725 Use item No.724 0:No , 1:Yes For COMPAL factory 1 0
726 Free -­727 Free -­728 Free -­729 Free -­730 Free -­731 Free -­732 Free -­733 Free -­734 Free -­735 Free -­736 Free -­737 Free -­738 Free -­739 Free -­740 Gain adjustment of RGB amplifier (FLAON) Main - - O O
741 Gain adjustment of RGB amplifier Sub - - O O
742 Automatic White Peak Adj. Single Picture mode - - O O
743 Automatic White Peak Adj. Multi Picture mode - - O O
744 EEPROM Initialize(0:No, 1:Yes) 10
745 Enter to service menu of sub mi-con --

Adjustment Items Mode

Function

Maximum

Value

Default

Changed Component

Formatter

PWB

VIDEO

PWB

TUNER

PWB

LCD

PANEL

14

28LD5200E (PW1L)

The Expression of input signal mode (format)

PAL1: RF, S and Composite of PAL/SECAM

PAL2: Component of PAL (YCBCR)

PAL3: Component of PAL (YPBPR)

PAL4: Component of PAL (YCBCR-SCART)

PAL: PAL1-4

NT1: S and Composite of NTSC

NT2: Component of NTSC (YCBCR)

NT3: Component of NTSC (YPBPR)

NT4: Component of NTSC (YCBCR-SCART)

NTSC: NTSC1-4

HD1-6: Component (shown in the table )

HD7: Component of 1080i/50 (YPBPR)

HD8: Component of 1080i/50 (YCBCR)

HD9: Component of 576p (YPBPR)

HD10: Component of 576p (YCBCR)

HD: HD1-10 of Component

TV: NTSC / HD

PC: PC signal

Video

Input

AV1
AV2

System

PAL 15.75kHz

NTSC 15.75kHz

PAL 31.25kHz

NTSC 31.50kHz

NTSC 45.00kHz

PAL 28.125kHz

NTSC 33.75kHz

Judgment of

H.Frequency

(576i)

(480i)

(576p)

(480p)

(720p)

(1080i)

(1080i)

Video Input

Setup

Auto PAL2

SDTV/DVD PAL2

HDTV PAL3

Auto NT2

SDTV/DVD NT2

HDTV NT3

Auto HD10

SDTV/DVD HD10

HDTV HD9

Auto HD3

SDTV/DVD HD3

HDTV HD2

Auto HD5

SDTV/DVD HD6

HDTV HD5

Auto HD7

SDTV/DVD HD8

HDTV HD7

Auto HD1

SDTV/DVD HD4

HDTV HD1

Mode

Factory Reset

After all of the adjustments of main chassis are finished, perform FACTORY RESET.

Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for

more than 5 seconds.

The unit is set to factory settings.

15

28LD5200E (PW1L)

Item AUTOMATIC SIGNAL LEVEL ADJUSTMENT –RGB (1)

Preparation Procedure

(1) Input the adjustment signal of VGA (60Hz)

format into RGB2 [D-sub] input terminal.

the adjustment signal

The signal level of black area
should be pedestal level.
This signal must not be inserted
characters etc.

White

Black

0.7V

[Note] Never adjust without use of the specified signal.

If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.

(1) Select RGB2 and enter the service adjustment

mode.

(2) Select No.740 “RGB Amp. Gain ADJ.” and press

OK button for more than 2 seconds to start the
adjustment.
It will complete the adjustment after the OSD of
“AUTO MODE” disappeared.

Item AUTOMATIC SIGNAL LEVEL ADJUSTMENT –RGB (2)

Preparation Procedure

(1) Input the adjustment signal of 576p or 480p

(1) Select AV1 and enter the service adjustment mode.

format into AV1 input terminal.

the adjustment signal (2) Select No.740 “RGB Amp. Gain ADJ.” and press

OK button for more than 2 seconds to start the

The signal level of black area
should be pedestal level.
This signal must not be inserted
characters etc.

adjustment.
It will complete the adjustment after the OSD of
“AUTO MODE” disappeared.

(3) Select No.741 “RGB Amp. Gain ADJ.” and press

OK button for more than 2 seconds to start the
adjustment.

Black

White

It will complete the adjustment after the OSD of
“AUTO MODE” disappeared.

0.7V

[Note] Never adjust without use of the specified signal.

If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.

16

28LD5200E (PW1L)

Item COLOR TEMPERATURE ADJUSTMENT -VIDEO

Preparation Procedure

(1) Set CRT COLOR ANALYZER(CA-210) at the

center of the screen panel.

(2) Input the full-white raster signal to AV1

component terminal and select AV1.

Signal condition

480i component
Video level: 0.56Vp-p
Sync level: 0.286Vp-p
Setup level: 0V

(3)

Set the diaplay size to "Full".
Set the Contrast mode of picture menu "Auto".
Set the Picture mode of Picture menu “Dynamic”.

[Adjustment of Cool mode]

(1)

Enter the service adjustment mode, and confirm that
Adjustment NO 0,1 are set as 230. NO2 is set as 255.
If initial x and y value are larger than specification,

No.0:R drive(cool) will be adjusted(decrease from 230)
No.1:G drive(cool) will be adjusted(decrease from 230)
No.2:B drive(cool) is set as 255

(2)

If initial x or y value is smaller than specification.

No2:B drive(cool) will be adjusted(decrease from 255),
until one of x,y is in spec and another value is higher than spec.
(* When both x and y are in spec value, it is end of adjustment )

(3)

According to a x and y value, the following adjustment of (3)-1 or (3)-2.

(3)-1 If x value is higher than spec.

No.0:R drive(cool) will be adjusted(decrease from 230)

(3)-2 If y value is 6higher than spec,
No1:G drive(cool) will be adjusted(decrease from 230)
* No.0:R or No.1:Fshould be set as 230

<Specification>
Color Temperature (Cool) for Video
25000K-6MCD x=0.257 0.005 y=0.256 0.005

[Adjustment of Normal mode]

No Adjustment. (11000K)

Adjustment No.3,4 and 5 are set as 230.

[Adjustment of Warm mode]

Enter the service adjustment mode, and confirm that Adjustment NO.6,7

(4)

and 8 are all set as 230.
In factory setting mode
No.8:B drive(warm) will be adjusted(decrease from 230),
until one of x,y is in spec and another value is higher than spec.
(* When both x and y are in spec value, it is end of adjustment )

(5)

According to x and y value, the following adjustment of (5)-1 or (5)-2.
(5)-1 If x value is higher than spec.
No.6:R drive(warm) will be adjusted(decrease from 230)
(5)-2 If y value is higher than spec,
No7:G drive(warm) will be adjusted(decrease from 230)
No.6 or No.7:Fshould be set as 230.

<Specification>
Color Temperature (Warm) for Video
7500K x=0.302 0.005 y=0.317 0.005

[Adjustment of Black / White mode]

(6)

Enter the service adjustment mode, and confirm Adjustment NO.9,10
and 11 are all set as 230.
In factory setting mode
No.11:B drive(B/W) will be adjusted(decrease from 230),
until one of x,y is in spec and another value is higher than spec.
(* When both x and y are in spec value, it is end of adjustment.)
According to x and y value, the following adjustment of (7)-1 or (7)-2.

(7)

(7)-1 If x value is higher than spec.
No.9:R drive(B/W) will be adjusted(decrease from 230)

(7)-2 If y value is higher than spec,
No.10:G drive(B/W) will be adjusted(decrease from 230)
No.9 or No.10:should be set as 230.

<Specification>
Color Temperature (B/W) for Video
5400K x=0.335 0.005 y=0.343 0.005

17

28LD5200E (PW1L)

Item COLOR TEMPERATURE ADJUSTMENT -PC

Preparation Procedure

It is same as color temperature adjustment
data of video.
Write the data which are inside drive No0
to No11 into drive N0.12 to No.23 respectively.

Example. [at VIDEO] [at PC]
No.0 'data' No.12 'data'
No.1 'data' No.13 'data'
No.2 'data' No.14 'data'

- -

- -

- ­ No.10 'data' No.22 'data'
No.11 'data' No.23 'data'

18

28LD5200E (PW1L)

5. Troubleshooting

How to get to Burn-in mode

This mode displays the test patterns of some single color raster in turn. These signals are from built-in generator

of LCD monitor.

Using the front control buttons with the set turned off (standby) can activate this mode.

Press the SUB-POWER( ) button, INPUT SELECT( ) button and VOLUME DOWN( ) button at the same

time, and hold for more than 5 seconds.

The set turns on with single color raster and the OSD of [BURN IN: ON].

To escape from this mode, press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the

same time, and hold for more than 5 seconds. Burn-in mode will be released.

How to recover the remote and front key function

If remote and front key cannot operate after miss set special function by front keys, these functions can recover

by below method.

Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for

more than 5 seconds.

The set turns on the service menu mode.

Select No.175 and data set from [0] to [1].

Or

Press the SUB-POWER( ) button and button at the same time, and hold for more than 5 seconds

19

28LD5200E (PW1L)

Power cannot be turned on (LED does not light)

Is the input voltage

applied to Power supply unit?

(CN5 [1][3])

Yes

Are the

voltages applied to

P804 [1][8]pins, P806[1]pin

and P808 [1][4][8][12]pins

of Power supply

unit?

Yes

Joint / Formatter PWB

Picture is displayed. But no sound

Check

Speaker terminal and

Speaker cord.

Locked

P804

P806

No sound

No

AC

inlet

No

[1] +5V
[8] +6V

[1] +12V

Unlocked

Check

Power
switch

[1] +30V

P808

[4] +5V
[8] +12V
[12] +10V

Is the voltage

applied to P804[3]pin of Power

supply unit high?

P804 [3]
Power GO

No(low)

applied to P804[5]pin of Power

Yes(high)

Power supply

unit

Yes(high)

Is the voltage

supply unit high?

No(low)

Sub

Power board

P804 [5]
Power OFF

Are the voltages

applied to EAJ1[1][5]pins

of the Audio PWB?

Yes

Are the signals

applied to EAF1[1][3]pins

of the Audio PWB?

Yes

Are there signals

on Speaker Terminals?

Yes

Speaker

[1] +5V
[5] +12V
[3] GND

[1] L ch
[3] R ch
[2] GND

No

No

Formatter PWB or

Video PWB

No

Audio PWB

Joint / Formatter PWB

Are the voltage

applied to EAJ1[1][5]pins?

(When EAJ1 is

disconnected.)

Audio PWB

Power

supply unit

No

Yes

Power supply

unit

20

Picture is not displayed (LED is lighting)

28LD5200E (PW1L)

Is the LED red or

green/orange?

green/orange

Is it the power
saving mode?

No

Is backlight lighting?

No

red

Yes

Input signal Cable
or Formatter PWB

Yes

Is Voltage applied

to P804[1]pin of the Power

supply unit?

Yes

Is Voltage applied

to EJF1[3]pin of the

Joint PWB?

Yes

Formatter PWB

Is the voltage of

EFJ1[1]pin, EFJ2[1][2]pins applied

to of the Formatter

PWB?

Yes

[1] +5V

[3] +5V

EFJ1
[1] +10V

EFJ2
[1] +6V
[2] +6V

No

Power supply

unit

No

Joint PWB

No

Power supply

unit

Is the voltage of

P802[5]pin on the Power

supply unit high?

Yes(high)

Is the voltage of

P804[1][2][3][4]pin on the

Power supply unit 16V?

Yes

Inverter unit

No(low)

Power supply unit

or

Formatter PWB

No

Power supply

unit

Is the voltage of

EFJ2[5][6][9][10]pins applied

to of the Formatter

PWB?

Yes

EFJ2
[5] +3.3V [9] +1.8V
[6] +3.3V [10] +1.8V

Is the voltage of

EFP2[1][2]pins on the Formatter

PWB 12V?

Yes

Formatter PWB

or

Panel Module

21

No

Joint PWB

No

Power supply

unit

28LD5200E (PW1L)

6. Self-Diagnosis Function

Signal circuit check mode: It indicates the check result on some points of the signal circuit and the history of them with On-Screen Display (OSD).

Signal circuit self-diagnosis function

This function is for the failure of the signal circuit, for example the phenomenon as below:
"Sometimes power turns off abnormally." "Sometimes picture disappears abnormally."
To enter to this Self-Diagnosis mode, follow the next steps:

Preparation:

1) The Power Cord should be connected to AC line and the Main Power switch should be turned on.

2) Turn the power off by the SUB-POWER(

Procedure:

1)

Press the SUB-POWER( ) button and button on the bottom of the monitor at the same time, and keep it for more than 5 seconds after the power turned on.

2) The monitor will be turned on, and it will display On-Screen Display of the Self-check result and the failure history as below.

3) Any operation would cancel the Self -Diagnosis mode.

4)

The following table shows the OSD symbols and contents of failure PWB in which failure most probably would be allocated according to the number of blinks.

) button of the monitor or the remote control.

Check item

Check result

Self Check

H11: OK H15: OK

H16: OK H31: OK

H32: OK H33: OK

F63 F63 - - - - - - - - -

[OSD]

Self check result area

Failure history area

Latest error code

Code stored up in

failure history

C10(* No sync. (Snow noise) OSD of “ ! Check Antenna ”

(

* Tuner problem Cannot receive the main

H11

H15 Composite video SW IC

H16 Component video SW IC

H31 Color demodulator IC

H32 Sync. separator IC

H33 3D Y/C separator IC

(

* T/Text IC problem No T/Text

H71

(

H72

* Sound MPX IC problem No sound from antenna

F63

)

This code is no meaning for the models except 32/42PD5000TA because those are without tuner circuit.

*

Self checking

item

Problem Phenomenon Cause

No connection of ANT cable

appears.

signal from antenna

Cannot receive picture and

problem

problem

problem

problem

problem

2

I

C-bus latch problem Cannot store setting data

audio

Cannot change input mode

No component picture

Cannot change input mode

Abnormal color

Dark picture

Unsynchronized picture Communication error of I601

Abnormal color

Dark picture / No picture

No picture

Cannot change MPX

sound

(Ex. Channel, Volume etc.)

Preset tuning is not yet

Communication error of U101

Communication error of I201

Communication error of I202

Communication error of I501

Communication error of I302

Communication error of IT01

Communication error of IN01

SCL3/SDA3 latched up

If you clear history of failure, make FACTORY RESET: enter the factory setting mode; press the SUB-POWER( )
button, INPUT SELECT( ) button and button on the bottom of the monitor at the same time. And keep it for
more than 5 seconds after the power turned on.

22

THE UPDATED PARTS LIST

FOR THIS MODEL IS

AVAILABLE ON ESTA

23

8. Block diagram

Block diagram 1/2

28LD5200E (PW1L)

INVERTER

AC100V

-240V

Remote
Control

D-SUB15P

Noise
Filter

Main Power SW

DVI

LED PWB

Formatter PWB

Digital RGB

Differential
signal

TMDS

(RECEIVER)

Inverter Power

TACT SW PWB

OSC

16MHz

RGBHV (Digital)

Back light

Power Unit

(Main Power Circuit)

CPU

(Main)

CPU

(Sub)

FC4

LCD Panel Module

Signal Power

DAC

Audio Signal

LVD S

Transmitter

Audio Power Supply

Speaker x2

Digital

Audio Amp

Audio

Processing

Audio Signal Processing
Unit

AUDIO

VIDEO

AV1

AV2

AV3

AV4

AV1

AV2
AV3
AV4

VIDEO PWB

AUDIO

SELECT

VIDEO

SELECT

Tuner

Tuner PWB

FE

VIDEO CROMA

TELE TEXT

3D/3L COMB

VIDEO OUT

24

Block diagram 2/2

28LD5200E (PW1L)

25

9. Connection diagram

Vcc 16V

Vcc 16V

Vcc 16V

ON/OFF

Vcc 16V5GND

GND

GND

VADJ

GND

ON/OFF

GND

678

678

GND11

GND

VADJ

GND

GND11

9

9

10

12 GND

10

12 GND

Inverter

Vcc 16V

1

1

CN-1

S12B-PH-SM

CN-1

Vcc 16V

Vcc 16V

2

3

2

3

Vcc 16V5GND

4

4

28LD5200E (PW1L)

LCH+

LCH-

1

2

SPEAKER (L)

LCH+

LCH-

1

2

EAS1 PAS3

ADKEY1

ADKEY2

ADKEY3

ECONTEFK1

123

ADKEY1

ADKEY2

1

2

GND

4

ADKEY3

GND

3

4

GND

RA-

GND

GND

RB+

RC-

GND

RCLK+

RA+

RB-

GND

12V

12V

PANEL

123456789

16 12V

17 12V

13 GND

EPM1 CN1

14 GND

2RA-

1011121314151617181920

3RA+

1GND

4RB-

5RB+

6GND

7RC-

RC+

8RC+

19 GND

RCLK-

9RCLK-

GND

GND

RD-

RD+

CTL

KEY

10 RCLK+

26 GND

11 RD-

12 RD+

31 GND

20 CTL

15 NC

18 NC

21 NC

22 NC

23 NC

24 NC

25 NC

27 NC

28 NC

29 NC

30 NC

LED/REM

CN-1

EFL1

STB5V

REM

GND

12345

STB5V

REM

GND

1

2

3

LED2(G)

LED1(R)

LED2(G)

LED1(R)

4

5

LEDOFF

6

6 LEDOFF

AUDIO

SPEAKER (R)

EAS2 PAS4

RCH+

RCH-

2

3

1NC

RCH+

RCH-

2

3

1NC

GND

GND

+12V

+12V

5V

LRMUTE

GND

123456789

LRMUTE

GND

123456789

EFA1 EAF1

GND

GND

SPRLY

SPRLY

AUDRST

AUDDET

AUDRST

AUDDET

SCL

SDA

10

SCL

SDA

10

1

LEDOFF

345

2

6

POWER

Vcc 16V

Vcc 16V

1

1

CN-1

S12B-PH-SM

P802

Vcc 16V

Vcc 16V

Vcc 16V

Vcc 16V

2

3

2

3

ON/OFF

Vcc 16V5GND

GND

ON/OFF

Vcc 16V5GND

GND

4

678

4

678

12V1

GND

GND

12V

GND

ON/OFF1

GND

VADJ

EFP1

P805

GND

234

Power Off

GND

GND6V6V

GND

GND

Power go

5

6

7

8

4

GND

Power go

4

DC

4

DC

4

9

EJP2

Power Off

GND

GND6V6V

5

6

7

8

9

P808

AC(L)NCAC(N)

123

CN-5

CN5-1

AC(L)NCAC(N)

123

CN-6

CN6-1

1 STB 5V23

JOINT

EJP1P804

CN-4

CN4-1

GND

1 STB 5V23

GND

VauxNC395V

123

GND

VauxNC395V

123

ON/OFF1

GND

VADJ

GND

234

234

EFP2

FORMAT

GND

VADJ

GND

GND11

GND

VADJ

GND

GND11

9

9

10

12 GND

10

12 GND

P806

5

12V1

GND

GND

12V

GND

234

5

30V

GND

GND5V5V5GND

1

2

3

30V

GND

GND5V5V5GND

1

2

3

STB5V

GND

1

2

STB5V

GND

1

2

10V1

STB5V

Power go

GND

GND

23456

EFJ1EJF1

GND

GND

10V1

STB5V

Power go

23456

12V

GND

GND

12V

678

GND

678

GND

9

101112

12V

GND

12V

GND

9

101112

4

4

LEDOFF

TV-POWER

7

LEDOFF

TV-POWER

7

10V

10V

13

10V

10V

13

EFJ2EJF2

PCL1

6V

1

6V

1

6V

GND

2

3

6V

GND

2

3

STB5V

AC.CLOCK

123

3.3V

GND5GND

3.3V

4

678

3.3V

GND5GND

3.3V

4

678

GND

VIDEO

GND

GND

1.8V

9

1.8V

9

EVJ1EVJ1

1.8V

10

1.8V

10

GND

11

GND

11

FE+30V1

FE+30V1

GND

234

GND

234

GND

123456789

EFJ3

GND

50

EJF3

SCL1

GND

SDA1

5

SCL1

GND

SDA1

TV.AFC

5

6TV.AFC6

SCL0

SCL0

49

FE.AGCO7 FE.AGCO7

SDA0

SDA0

48

FE.AGCI8 FE.AGCI8

3D+3.3V1

3D+3.3V1

SCL1

GND

GND

MSP.RST

TV.AFC

FE..AGC.OUT

FE.MONO

SDA1

TEXT.RST

MSP.ST

FE.AGC.IN

1011121314151617181920212223242526272829303132333435363738394041424344454647484950

SCL1

GND46GND

MSP.RST

TV.AFC

SDA1

TEXT.RST

MSP.ST

47

FE.MUTE9 FE.MUTE9

A+9V

234

A+9V

234

FE.MONO10 FE.MONO10

3D+3.3V

3D+3.3V

FE.AGC.IN

4544434241

40

393837363534333231

FE.MODE

FE.SAP

FE.ST

GND

TX.RESET

MSP.STATUS

MSP.RESET

11

12

13

14

15

161718192021222324252627282930

FE.MODE

FE.SAP

FE.ST

GND

TX.RESET

MSP.STATUS

MSP.RESET

11

12

13

14

15

161718192021222324252627282930

A+6V

A+9V

GND6

FE+30V7

GND8

GND9

GND10

5

A+6V

A+9V

GND6

FE+30V7

GND8

GND9

GND10

5

WSS

FE.MODE

FE.SAP

FE.ST

FE.MUTE

MCV.SYNC

SCV.SYNC

FE..AGC.OUT

FE.MONO

WSS

FE.MODE

FE.SAP

FE.ST

FE.MUTE

MCV.SYNC

SCV.SYNC

302928272625242322

GND

GND

GND

A+6V

A+6V

GND

11

GND

11

SDA0

STB+5V

A+10V

SCL0

DIP.DET

GND

GND

GND

SDA0

STB+5V

A+10V

SCL0

DIP.DET

TV.CV

GND

TV.R

TV.AFC

GND

TV.L15GND

12

TV.CV

12

GND

13

14

161718192021222324252627282930

GND

TV.L15GND

GND

TV.R

TV.AFC

GND

161718192021222324252627282930

13

14

COMP.HD

GND

COMP.VD

COMP.HD

GND

COMP.VD

VIDEO.DET1

TUNER.DET1

TUNER.DET2

VIDEO.DET1

TUNER.DET1

TUNER.DET2

FE. AGCO

FE. MUTE

FE. AGCI

FE. AGCI

FE. AGCO

FE. MUTE

GND

GND

VIDEO.DET2

VIDEO.DET2

FE. MONO

FE. MONO

DIP.DET

FANDE T

T.DET1

T.DET2

DIP.DET

FANDE T

T.D ET 1

T.D ET 2

RXD

Vpp

BUSY

SCLK

313233343536373839

313233

3435363738

RXD

Vpp

BUSY

SCLK

313233

34353637383940

FE. MODE

FE. SAP

GND

FE. SAP

GND

FE. MODE

GNDMHMV

V.DET1

V.DET2

GND

AV-LINK

AC.CLOCK

AVC.PARITY

V.DET1

V.DET2

GND

AV-LINK

AC.CLOCK

GNDMHMV

AVC.PARITY

201918171615141312

21

TXD

CNVSS

RESET

WSS

AV.LINK

AVDET2

AVC.PARITY

313233

40 AVC.RXD

414243444546474849505152535455565758596061626364656667686970717273747576777879

39

WSS

AV.LINK

AVDET2

AVC.RXD

TXD

CNVSS

RESET

AVC.PARITY

414243

GND

MSP.STATUS

MSP.RESET

GND

MHD(15kHz)

MVD(15kHz)

MCCD/TX. G

MCCD/TX. B

34353637383940

313233

MSP.STATUS

MSP.RESET

GND

MHD(15kHz)

MVD(15kHz)

MCCD/TX. G

MCCD/TX. B

GND

313233

34353637383940

AVC.RXD

REM-PDP

AVDET2

AVC.TXD

PDDETSHSV

GND

AVC.RXD

REM-PDP

AVDET2

AVC.TXD

PDDETSHSV

987

6

54321

11

10

GND

V.FREQ

H.FREQ

GND

MCV.SYNC

GND

SCV.SYNC

GNDMYMPB

3435363738394041424344

GND

V.F RE Q

H.FREQ

GND

MCV.SYNC

GND

SCV.SYNC

GNDMYMPB

4445464748495051525354

TX.RESET

SVD(15kHz)

SHV(15kHz)

GND

MCV/Y(CCD/TX)

GND

GND

MCV/Y(CCD/TX)

GND

414243

TX.RESET

414243

GND

4445464748495051525354

SVD(15kHz)

SHV(15kHz)

GND

4445464748495051525354

MCCD/TX. R

MCCD/TX. BLK

MCCD/TX. R

MCCD/TX. BLK

LRGND

GND

L

R

GND

MPR

GNDMHMV

MPR

GNDMHMV

SCCD. BLK

SCCD. R

SCCD. G

SCCD. BLK

SCCD. R

SCCD. G

GND

GND

45

55

SCCD. B

SCCD. B

MY

MCb

MCr

GND

GND

123456789

EFJ4

MY

MCb

MCr

GND

GND

123456789

EJF4

GNDSYSPRSHSPB

GNDSVGND

464748495051525354

GNDSYSPRSHSPB

GNDSVGND

565758596061626364

SCCD. SW

SCV(CCD)

GND

SY(CCD)

TUNER. DET1

TUNER. DET2

SCL1

SDA1

565758

55

SCCD. SW

SCV(CCD)

GND

SY(CCD)

TUNER. DET1

TUNER. DET2

SCL1

SDA1

55

565758

GNDSYSCb

GND

GNDSYSCb

GND

GND

TV.POWER

55

5657585960

GND

TV.POWER

65

6667686970

GND

SCL0

SDA0

59

GND

SCL0

SDA0

59

L

L

60 GND

60 GND

SCr

GND

101112

SCr

GND

101112

R

GND

R

GND

GND

GND

GND

GND

GND

RXD

BUSY

VDD

VPP

1234567

EFG1EJF5

GND

RXD

BUSY

VDD

VPP5TXD

1

2

3

4

+5V

RES

FEW

REM-PDP

AVC.TXD

PDDET

S.TXD

S.RXD

515253545556575859

7172737475

7677787980

+5V

RES

FEW

REM-PDP

AVC.TXD

PDDET

S.TXD

S.RXD

7172737475

7677787980

TXD

SCLK

CNVSS

RESET

GND

TXD

RXD

+5V

RES

MD2

1234567

GND

S.TXD

S.RXD

+5V

RES5MD2

1

2

3

4

FEW

FEW

678

8

EFG2EJF6

RESET99

SCLK

CNVSS

678

MD2

FCK

60

80

MD2

FCK

FCK

8

FCK

EJA1 EAJ1

5V

1

GND

LEDOFF

2

3

GND

4

+12V

5

+12V

6

SUB POWER

TUNER

ASIA Tuner Transfer Board

AGC1

GND

GND

234

CN1

AGC1

GND

GND

234

CN1

ASIA-ENG39616G

NC

NC1

TU(NC)

SCL(IF)

AGC

GND

GND6

V-supply+5V

7

V-supply+5V

GND6

7

GND

GND8

BTL+30V9

GND10

BV+5V1

11

12

CN2

GND8

BTL+30V9

GND10

BV+5V1

GND

GND

11

12

CN2

GND

AUDIO-OUT

AFT

234

GND

AUDIO-OUT

AFT

234

AGC-OUT

VIDE-OUT6

AGC-CONT

7

5

AGC-OUT

VIDE-OUT6

AGC-CONT

7

5

SW18

SW18

SW29

SIF-OUT10

SW29

SIF-OUT10

GAME-MODE

GND

GND

GND

11

12

13

14

GAME-MODE

GND

GND

GND

13

14

11

12

GND

15

GND

15

SDA

SCL

5

SDA

SCL

5

234

CN1

NC1

AGC

234

CN1

EU Tuner Transfer Board

EU-ENG295244G

ADR

TU(NC)

ADR

5

SCL(IF)

5

IF 1

SDA(IF)6

NC7

+5V8

NC9

+30V10

IF OUT1NCAFT OUT

+5V

GND

234

11

12

CN2

NC

IF 1

SDA(IF)6

NC7

+5V8

NC9

+30V10

IF OUT1NCAFT OUT

+5V

GND

234

11

12

CN2

RF AGC6

VIDEO OUT7SDA(TUNER)8SCL(TUNER)

5

VIDEO OUT7SDA(TUNER)8SCL(TUNER)

RF AGC6

5

NC

NC

SIF OUT10

9

11

12

SIF OUT10

NC

NC

9

11

12

26

10. Wiring diagram

28LD5200E (PW1L)

32

INVERTER UNIT

86

SUB POWER board

CN5-1

ECONT

CN1

CN6-1

CN2

CN4-1

38

30

AUDIO board

EAS1

TO SP (Right)

EAS2

EFJ2 EFJ1

EFJ3

22

EJP1

37

EAF1

EJF3A

25

To Panel

EAJ1

EJF4 EJF6

EFJ4 EFA1 EFL1 EFK1 EFG1 EFG2

29

EFP1

23

EFP2

EJP2

21

JOINT board

EJA1

EJF5

2726

EJF1

EJF2

CN5

P802

P803

P804

86

POWER board

CN4

86

SW902

P901 P903

POWER SW

SW901

INLET board

34

CN1

LED board

31

24

EPM1

33

FORMATTER board

27

P806

86

CN6

P804

P808

11. Disassembly diagram

28LD5200E (PW1L)

The codes in brackets shown in the wiring diagram express the name of materials.
The key to the codes and materials is shown on the table below.

Code









ABS

PC

ACRYLONITRILE BUTADIENE STYRENE

Material

POLYCARBONATE





#$5















2%



















#$5























28










Hitachi, Ltd. Tokyo, Japan

International Sales Division

THE HITACHI ATAGO BUILDING,

No. 15 –12 Nishi Shinbashi, 2 – Chome,

Minato – Ku, Tokyo 105-8430, Japan.

Tel: [phone]

HITACHI EUROPE LTD,

Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire
SL6 8YA

UNITED KINGDOM

Tel: [phone]
Fax: [phone]
Email: [e-mail]

HITACHI EUROPE GmbH

Munich Office
Dornacher Strasse 3
D-85622 Feldkirchen bei München

GERMANY

Tel: [phone]
Fax: [phone]
Hotline: [phone] (12ct/min)
Email: [e-mail]

HITACHI EUROPE srl

Via Tommaso Gulli N.39, 20147
Milano, Italia

ITALY

Tel: [phone]
Tel: [phone] Servizio Clienti
Fax: [phone]

Email: [e-mail]

HITACHI EUROPE S.A.S

Lyon Office
B.P. 45, 69671 BRON CEDEX
FRANCE
Tel: [phone]
Fax: [phone]
Email: [e-mail]

HITACH EUROPE AB

Egebækgård
Egebækvej 98
DK-2850 Nærum

DENMARK

Tel: [phone]
Fax: [phone]
Email: [e-mail]

Hitachi Europe Ltd

Bergensesteenweg 421
1600 Sint-Pieters-Leeuw

BELGIUM

Tel: [phone]
Fax: [phone]
Email: [e-mail]

www.hitachidigitalmedia.com

HITACHI EUROPE S.A.

364 Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens

GREECE

Tel: [phone]
Fax: [phone]
Email: [e-mail]

HITACHI EUROPE S.A.

Gran Via Carlos III, 86, planta 5
Edificios Trade - Torre Este
08028 Barcelona

SPAIN

Tel: [phone]
Fax: [phone]
Email: [e-mail]

HITACHI Europe AB
Box 77 S-164 94 Kista

SWEDEN

Tel: [phone]
Fax: [phone]
Email: [e-mail]

HITACHI EUROPE LTD (Norway) AB
STRANDVEIEN 18
1366 Lysaker
NORWAY
Tel: [phone]
Fax: [phone]
Email: [e-mail]

HITACHI EUROPE AB

Neopoli / Niemenkatu 73
FIN-15140 Lahti

FINLAND

Tel : [phone]
Fax: [phone]
Email: [e-mail]

HITACHI EUROPE LTD

Na Sychrove 975/8
101 27 Pr aha 10 – Bohdalec

CZECH REPUBLIC

Tel: [phone]
Fax: [phone]
Email: [e-mail]