Guangzhou puppy robotics Co.,Ltd
A smarter life at your fingertips
Welcome to puppy cube!
Device
Device Overview
1
2
3
4
5
6
7
9 10 11 12 13
Power-On/Power-Off/Screen-Off
8
Power
button
Power button
1
Volume buttons
2
Microphone
3
Camera lens
4
Indicator
5
Projection window
6
Speaker
7
Back cover
8
Charging port
9
HDMI 2.0
10
RESET hole
11
USB 3.0
12
Headphone jack
13
Power-On: When the device is off, press and hold the power button for
3 seconds to turn it on.
Power-Off: When the device is on, press and hold the power button for
3 seconds and select Power Off in the shutdown menu that appears.
Screen-Off: When the device is on, press the power button to turn off
the screen display.
Vertical/Horizontal
1. Vertical Touch Control Projection:
Stand the device upright on a flat surface. After turning it on, you can perform
touch control operations in the projection area.
* Do not place objects in the projection area and avoid strong light sources that shine
on the projection area.
2. Horizontal Cinema Projection:
Lay the device horizontally on a flat surface. After turning it on,
you can project a large cinema-style screen on a wall or projection screen.
To enlarge or reduce the projection area, adjust the distance between the
wall or screen and the device.
* Do not place objects in the projection path or projection area and avoid strong light sources that
shine on the projection area.
When the device is in the horizontal position, it is better to operate using the remote control.
Auto Focus
After the device turns on, it performs auto focus for about 4 seconds to
adjust the picture clarity. To perform auto focus again, tilt the device
forward about 30° and stand it up straight again.
Device Indicator
Device State
Charging
Low battery
Power-Off
Operation State
Charging
Fully charged
Battery ≤ 15%
No external power
supply/battery
Indicator State
Orange light
Green light
(turns off after five minutes)
Red light
No lights
Wireless Projection
When the device is connected to the same WLAN as your mobile phone or tablet,
enable the projection function on the phone or tablet and, in the device list that
appears, select the option that includes the words "puppy cube" to connect.
Hard Reset (Fault Recovery)
When the device crashes or does not work normally, press and hold the
power button for 15 seconds to force restart the device.
If the force restart operation has no effect, insert a pin or other long and
thin object into the RESET hole to force shut down the device. After the
device shuts down, press the power button to restart the device and
complete the reset operation.
Remote Control
Remote Control Overview
1
4
2
3
5
6
7
Remote Control Indicator
Remote
Control State
Pairing
Paired
Charging
Operation State
Press and hold the Back and
Menu buttons for 3 seconds
Any button is pressed
Charging
Fully charged
On/Off button
1
Focus button
2
Directional and selection buttons
3
(up, down, left, right, OK)
Back button
4
Home button
5
Menu button
6
Volume buttons (-, +)
7
Indicator State
Blue and red lights flash
alternatively for 60 seconds
Blue light flashes once
Red light remains on
Green light remains on
Low battery
Any button is pressed
Red light flashes twice
Enable Auto Focus
Press the "Focus" button on the remote control to enable the device's auto focus
function.
What's in the Box
Device Power
Remote
control
Power
cord
adapter
Data
cable
Instruction
manual
Precautions
Do not point the projector at eyes, as it may cause injury.
Do not obstruct the air inlet/outlet. Otherwise, abnormal heat
ventilation may cause damage to the device.
Do not place the device in areas with excessively high or low
temperatures. The temperature of the operating environment
should be -10°C to 40°C.
Use the device in a clean and dry environment. Avoid exposure to
liquid splashes and rain, as the device is not designed to be
water-resistant.
Do not rinse the device using chemicals, detergents, or water. You
can gently wipe the device's surface with a dry cloth.
Do not squeeze the device with force or place heavy objects on the
device, as this may damage the device.
Do not throw, knock, or violently shake the device. Otherwise,
damage may be caused to the internal components.
Do not dry the device by putting it in heating equipment.
Do not dismantle the device without the authorization from Puppy
Robotics. If you have a problem, contact Puppy Robotics's customer service department.
Warranty
card
Guangzhou puppy robotics Co.,Ltd
reserves the right to interpret and modify these instructions
puppy cube
Loading...