• Two HDMI connectors for digital video and
audio. This connection is also designed to
accept high defi nition signals.
• 200 programmes from VHF, UHF.
• OSD menu system.
• Two scart sockets for external devices (such
as video, video games, audio set, etc.).
• Stereo sound system. (
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
• Automatic sound mute when no
transmission.
• NTSC playback.
• PIP / PAP / PAT functions.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5
minutes the TV switches itself automatically
to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP,
Vista.
• Audio line out.
• Game Mode.
German+Nicam)
Accessories
Remote Controller
Instruction Book
M
SELECT
OK
ABC
DEF GHI
2
1
JKLMNO
5
4
VWX
STU
8
7
0
PP
P+
P -
SWAP
DTV
TV
I-II
P<P
/
WIDE
RC 1050
Batteries
2 X AAA
INFO
3
PQR
6
YZ
9
-/--
EXIT
+
SOURCE
AV
/
GUIDE
English - 3 -
Quick Guide
Cable Holer
Introduction
Thank you for choosing this product. This
manual will guide you in the proper
operation of your TV. Before operating
the TV, please read this manual
thoroughly.
Please do keep this manual in a safe
place for future references.
Preparation
For ventilation, leave a free space of at least
10 cm all around the set. To prevent any faults
and unsafe situations, please do not place any
objects on top of the set.
Use this device in moderate climates.
Safety Precautions
Please read the following recommended
safety precautions carefully for your
safety.
Power Source
The TV set should be operated only from a 220240 V AC, 50 Hz outlet.
Power Cord
Do not place the set, a piece of furniture, etc.
on the power cord (mains lead) or pinch the
cord. Handle the power cord by the plug. Do
not unplug the appliance by pulling from the
power cord and never touch the power cord with
wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or
tie it with other cords. The power cords should
be placed in such a way that they are not likely
to be stepped on. A damaged power cord can
cause fi re or give you an electric shock. When it
is damaged and needs to be replaced, it should
be done by qualifi ed personnel.
English - 4 -
Moisture and Water
Do not use this device in
a humid and damp place
(avoid the bathroom, the
sink in the kitchen, and near
the washing machine). Do
not expose this device to
rain or water, as this may be
dangerous and do not place
objects filled with liquids,
such
as vases, on top. Avoid
dripping or splashing.
If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualifi ed
personnel before operating it any further.
Cleaning
Before cleaning, unplug the TV
set from the wall outlet. Do not
use liquid or aerosol cleaners.
Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are
intended for ventilation and to ensure reliable
operation. To prevent overheating, these
openings must not be blocked or covered in
anyway.
Heat and Flames
The set should not be placed
near to open flames and
sources of intense heat such
as an electric heater. Ensure
that no open fl ame sources,
such as lighted candles,
are placed on top of the TV.
Batteries should not be exposed to excessive
heat such as sunshine, fi re or the like.
Lightning
In case of storm and lightning
or when going on holiday,
disconnect the power cord
from the wall outlet.
Replacement Parts
When replacement parts are required, make
sure that the service technician has used
replacement parts, which are specifi ed by the
manufacturer or have the same specifi cations as
the original one. Unauthorized substitutions may
result in fi re, electrical shock or other hazards.
Servicing
Please refer all servicing to
qualifi ed personnel. Do not
remove the cover yourself as
this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable
and should principally be recycled. Packaging
materials, such as foil bag, must be kept away
from children.
• Batteries, including those which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
battery in an
Find out about the legal regulations which
apply in your area.
• Cold cathode fluorescent lamp in LCD
PANEL contains a small amount of mercury;
please follow the local laws or regulations for
disposal.
enviromentally friendly manner.
Information for Users in European
Union Countries
Disconnecting the Device
The mains plug is used to disconnect TV set
from the mains and therefore it must remain
readily operable.
Headphone Volume
Excessive sound pressure from
earphones and headphones
can cause hearing loss.
Installation
To prevent injury, this device
must be securely attached to the wall in
accordance with the installation instructions
when mounted to the wall (if the option is
available).
LCD Screen
The LCD panel is a very high technology product
with about a million thin fi lm transistors, giving
you fi ne picture details. Occasionally, a few
non-active pixels may appear on the screen
as a fi xed blue, green or red point. Please note
that this does not affect the performance of
your product.
Warning
Do not leave your TV in standby or operating
mode when you leave your house.
The mark is in compliance
with the Waste Electrical
and Electronic Equipment
Directive 2002/96/EC
(WEEE).
The mark indicates the
requirement NOT to dispose
the equipment including any
spent or discarded batteries
as unsorted municipal waste, but use the return
and collection systems available. If the batteries
or accumulators included with this equipment,
display the chemical symbol Hg, Cd, or Pb,
then it means that the battery has a heavy
metal content of more than 0.0005% Mercury,
or more than 0.002% Cadmium or more than,
0.004% Lead.
English - 5 -
Overview of the Remote Control
Standby1.
Cursor up2.
Cursor right3.
Info4.
Numeric buttons5.
Exit (in DTV mode)6.
Programme up7.
Volume up8.
TV / Digital TV9.
AV / Source10.
Yellow (Feature menu) / Current language 11.
(*)
Blue (Install menu) / Favourite selection (*)12.
Hold (in TXT mode) / PIP position13.
Update (in TXT mode) / PAP mode14.
Index page / Guide (in DTV mode)15.
Reveal (in TXT mode) / Switch from TV to 16.
PC
Expand (in TXT mode) / Image Size17.
Mix (in TXT mode) / PIP mode18.
Teletext 19.
Time / Subtitle on-off 20.
Red (Sound menu) / 21.Channel list (in DTV
mode)
Green (Picture menu) / 22.Subtitle (*) (in DTV
mode)
Swap / Previous programme23.
Mono/Stereo - Dual I-II 24.
Programme down / Page up (in DTV 25.
mode)
Volume down 26.
Personal preferences27.
Okay (store) / Select (in DTV mode)28.
Cursor down29.
Cursor Left30.
Menu31.
Mute32.
(**) (in DTV mode)
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
SELECT
OK
ABC
1
JKLMNO
4
STU
7
PP
SWAP
I-II
P<P
WIDE
M
DEFGHI
2
5
VWX
8
0
P+
P -
DTV
TV
/
RC 1050
+
INFO
3
PQR
6
YZ
9
-/--
EXIT
SOURCE
GUIDE
1
2
3
4
5
6
7
8
9
AV
10
11
12
/
13
14
15
16
(*) Only available for EU country options.
(**) Only available for UK country option.
English - 6 -
LCD TV and Operating Buttons
FRONT VIEW
Standby button1.
TV/AV button2.
Programme Up/3.
Down buttons
Volume Up/Down 4.
buttons
Note: Press “”/
“”buttons at the
same time to view main
menu.
SIDE VIEW
REAR VIEW
English - 7 -
Viewing the Connections- Back Connectors
12
5Vdc 60mA
1. S/PDIF Digital Out outputs digital audio signals of the currently watched source.
Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.
2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
Audio Line Out 3. outputs audio signals to an external device such as an optional sound
system.
To connect an external amplifi er and speakers to your TV; connect the TV’s audio LINEOUT sockets to the line input sockets on an external amplifi er with a stereo phono to phono
cable.
4. SCART 2 inputs or outputs for external devices.
5. SCART 1 inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically
switch to AV mode. If both sockets are employed at the same time, SCART 1 will override
SCART 2 unless manually selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled
channel. The decoder might not function properly if you do not connect the decoder to the
Scart 1 (Ext-1) socket.
English - 8 -
6. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the COMPONENT VIDEO INPUTS
on on the TV and the component video outputs of your device. While connecting, be sure
that the letters on your TV, “ Y”, “ Pb”, “ Pr” correspond with your device’s connectors.
7. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that
connects to the TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of
your PC to enable PC audio.
Connect the audio cable between
enable component audio.
8. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input.
ANT Input9. connects to an aerial.
Note that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate aerial cable, as shown in the
illustration on the following pages.
10. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
11. HDMI-2: HDMI Input
HDMI 1: 12.HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Defi nition pictures from devices such as
a High Defi nition Satellite Receiver or DVD Player. These devices must be connected via
the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i
signals. No sound connection is needed for an HDMI to HDMI connection.
AUDIO IN on the TV and audio outputs of your device to
When you use the wall mount kit (not provided with the LCD TV), we would defi nitely recommend
to plug all your cables into the back of the LCD before mounting to the wall.
English - 9 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows 1.
you to view channels that you subscribe to. For more
information, see “Conditional Access” section.
Side USB input .2.
Note: Codec update cannot be performed.
3. Headphone jack is used for connecting an external
headphone to the system. Connect to the HEADPHONE
jack to listen to the TV from headphones.
Video Input is used for connecting video signals 4.from
external devices.Connect the video cable between the
VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
Audio Inputs are used for connecting audio signals 5.from
external devices. Connect the audio cable between AUDIO
IN on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO
INPUT, you should also connect your device with an audio
cable to AUDIO IN on the TV to enable audio.
Standby switch is used for turning the TV on or off.6.
English - 10 -
Power Connection
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect
the set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
5Vdc 60mA
REAR VIEW
Using the Cable Holder
You can use the supplied cable holder as the following:
• Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated
above.
• Place cables into the cable holder after all necessary connections are made.
English - 11 -
Using Digital Multimedia Connectors
• You can connect USB devices to your TV by using the USB input of the TV. This feature allows
you to display/play JPG and MP3 fi les stored in a USB stick.
• It is possible that certain types of USB devices
this TV.
• You may back up your fi les before making any connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not be responsible for any fi le damage or data
loss.
• Do not pull out USB module while playing a fi le.
CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical
damage to the USB player and especially the USB device itself .
SIDE VIEW USB MEMORY
USB Memory Connection
• Plug your USB device to the USB input of the TV.
Note: USB hard disk drives are not supported.
• It is recommended that you connect your USB device directly to the USB input of the TV. Some
compatibility problems may occur if you use a separate cable connection.
(e.g. MP3 Players) may not be compatible with
English - 12 -
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your LCD TV, you can connect your computer
to the TV set.
• Power off both computer and display before making any connections.
• Use 15-pin D-sub display cable to connect a PC to the LCD TV.
• When the connection is made, switch to PC source. See “Input selection” section.
• Set the resolution that suits your viewing requirements. Resolution information can be found in
the appendix section.
REAR VIEW
5Vdc 60mA
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
English - 13 -
Audio
Inputs
PC Input
PC RGB cable
(not supplied)
to PC input
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through SCART sockets. Use a scart cable to connect as
shown below.
• You may also connected through COMPONENT sockets. Use a component video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When done,
switch to YPbPr source. See, “Input selection” section.
Note: These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
5Vdc 60mA
Scart sockets
Component
video
inputs
REAR VIEW
English - 14 -
Component
audio
inputs
DVD Player
HDMI
inputs
Using Side AV Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.
• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For
selecting the related source, see the section “Input selection” in the following parts.
• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.
Headphone
Camcorder
SIDE VIEW
English - 15 -
Using Other Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.
• For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to
enable sound connection.
• To connect external speakers; connect the audio output sockets on the TV to an external amplifi er
that is connected to a speaker system.
• After connecting the cable between your TV and external amplifi er, turn your TV and amplifi er
on.
• You can refer to your amplifi er and speaker set instruction manual for further information.
External Speakers
A device that
supports
SPDIF signal.
REAR VIEW
English - 16 -
5Vdc 60mA
Loading...
+ 38 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.