Hitachi L22DP04U H User Manual

22" LCD Colour Television
with integral DVD player
L22DP04U H
2
Instructions for use
GB
Contents
Package Contents .................................................. 2
Features ................................................................. 2
Introduction ............................................................. 2
Preparation ............................................................. 3
Safety Precautions ................................................. 3
Power Source ..................................................... 4
Power Cord ......................................................... 4
Warning .............................................................. 4
Disconnecting the Device ................................... 4
Moisture and Water ............................................ 4
Cleaning.............................................................. 4
Heat and Flames ................................................ 4
Lightning ............................................................. 4
Replacement Parts ............................................. 4
Servicing ............................................................. 4
Waste Disposal ................................................... 4
Information for Users in European Union
Countries ............................................................ 5
Headphone Volume ............................................ 5
Installation........................................................... 5
LCD Screen ........................................................ 5
Overview of the Remote Control ............................ 6
LCD TV and Operating Buttons .............................. 7
Viewing the Connections- Back Connectors .......... 7
Viewing the Connections - Side Connectors .......... 8
Power Connection .................................................. 8
Aerial Connection ................................................... 8
Connecting the LCD TV to a PC ............................. 9
Using Side USB Input ............................................. 9
USB Memory Connection ................................... 9
Connecting to a DVD Player................................. 10
Using Side AV Connectors ................................... 10
Connecting Other Equipment via Scart ................ 10
Inserting Batteries into the Remote Control...........11
Switching the TV On/Off ........................................11
To Switch the TV On ..........................................11
To Switch the TV Off ..........................................11
Input Selection .......................................................11
Basic Operations ...................................................11
Operation with the Buttons of the TV .................11
Operation with the Remote Control ...................11
Initial Settings ....................................................... 12
General Operation ................................................ 12
Electronic Programme Guide (EPG) .................... 13
Displaying Subtitles .......................................... 13
Digital Teletext (** for UK only) ......................... 13
Analogue Teletext ............................................. 13
Widescreen ....................................................... 13
IDTV Menu System .............................................. 14
Channel List ...................................................... 14
Timers ............................................................... 15
Conditional Access ........................................... 16
TV Setup ........................................................... 16
Setup ................................................................ 16
Media Browser .................................................. 20
Playing MP3 Files ............................................. 20
Viewing JPG Files ............................................. 20
Slideshow Options ............................................ 20
Video Playback ................................................. 21
Analogue TV Menu System .................................. 21
Picture Menu..................................................... 21
Sound Menu ..................................................... 22
Feature Menu ................................................... 22
Source Menu .................................................... 23
Install Menu ...................................................... 24
Program Table .................................................. 24
PC-VGA Mode Menu System ............................... 25
PC-VGA Position Menu .................................... 25
Displaying TV Information .................................... 25
Mute Function ....................................................... 25
Picture Mode Selection......................................... 25
Zoom Modes......................................................... 26
Auto .................................................................. 26
16:9 ................................................................... 26
4:3 ..................................................................... 26
Teletext ................................................................. 26
Tips ....................................................................... 27
Image Persistence ............................................ 27
No Power .......................................................... 27
Poor Picture ...................................................... 27
No Picture ......................................................... 27
Sound ............................................................... 27
Remote Control................................................. 27
Input Sources.................................................... 27
Appendix A: PC Input Typical Display Modes ....... 28
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 29
Appendix C: Supported File Formats for USB
Mode..................................................................... 30
Specifi cations ....................................................... 31
Package Contents
INFO
SCREEN
SLEEP
SOURCE
PRESETS
LCD TV
RETURN
MENU
Batteries: 2 X AAA
SUBTITLE
LANG.
FAV
EPG
/
Instruction Book
Remote Control
Quick Guide
Note: You should check the accessories after purchasing. Make sure that each accessory is included.
Features
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
• HDMI connectors for digital video and audio. This connection is also designed to accept high defi nition signals.
• 200 programmes from VHF, UHF(analogue).
• 500 programmes for digital mode (IDTV).
• OSD menu system.
• Scart socket for external devices (such as video, video games, audio set, etc.).
• Stereo sound system.
• 10 page Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5 minutes the TV switches automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98,ME,2000,XP, Vista, Windows 7.
• Game Mode
Introduction
Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly.
Please do keep this manual in a safe place for future references.
This device is intended to receive and display TV programs. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder,VCR, PC etc.). This device is only suitable for the operation in dry interiors.
This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modifi cations have been made. To operate your LCD-TV in extreme ambient conditions may cause the damage of the device.
Please read the corresponding instructions of this handbook prior to the fi rst usage of the device, even when the usage of electronic devices is familiar to you. Notice especially the chapter SAFETY PRECAUTIONS. Carefully keep the handbook as future reference. When selling the device or giving it away, absolutely give these direction for use.
Preparation
For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.
Use this device in moderate climates.
10 cm
10 cm
10 cm
Safety Precautions
Please read the following recommended safety precautions carefully for your safety.
SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
**************
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat.
**************
DON’T remove any fi xed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects fi lled with liquids, such as vases, to be placed on the equipment.
DON’T place hot objects or naked fl ame sources such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fi res.
DON’T use makeshift stands and NEVER fi x legs with wood screws - to ensure
complete safety always fit the manufacturer’s approved stand or legs with the fi xings
provided according to the instructions.
DON’T use equipment such as personal stereos or radios so that you are distracted from
the requirements of traffi c safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your
hearing.
DON’T leave equipment switched on when it is unattended unless it is specifi cally stated
that it is designed for unattended operation or has a stand-by mode. Switch off using the
switch on the equipment and make sure that your family know how to do this. Special
arrangements may need to be made for infi rm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working
normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult
your dealer.
ABOVE ALL
--- NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock;
--- NEVER guess or take chances with electrical equipment of any kind
--- it is better to be safe than sorry!
*************
Power Source
The TV set should be operated only from a 220-240 V AC, 50 Hz outlet.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause fi re or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualifi ed personnel.
This TV receiver is supplied with a moulded mains plug. The mains plug must not be cut off, as it may contain a special radio interference fi lter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer.
Observe the manufacturers instructions when connecting extension leads to the set. Check the fuse rating on the new plug; this should be fi tted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1362) approvals, these are easily identifi able by
either the about the installation of an extension lead, please consult a competent electrician.
ASA
or symbols. If you are in any doubt
Warning
Do not leave your TV in standby or operating mode when you leave your house.
Disconnecting the Device
The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.
Moisture and Water
Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects fi lled with liquids, such as fl ower vases, on top. Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualifi ed personnel before operating it any further.
Cleaning
Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to open ames and sources of intense heat such as an electric heater. Ensure that no open ame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, fi re or the like.
Lightning
Before a storm and lightning or when going on holiday, disconnect the power cord and aerial lead from the wall sockets.
Replacement Parts
When replacement parts are required, make sure that the service technician has used replacement parts, which are specifi ed by the manufacturer or have the same specifi cations as the original one. Unauthorized substitutions may result in fi re, electrical shock or other hazards.
Servicing
Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal­free, should not be disposed of with household waste. Please dispose of used battery in an environment friendly manner. Find out about the legal regulations which apply in your area.
• Cold cathode fluorescent lamp in LCD PANEL contains a small amount of mercury; please follow the local laws or regulations for disposal.
Information for Users in European Union Countries
The above mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/ EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than
0.0005% Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead.
Headphone Volume
Excessive sound pressure from earphones and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).
LCD Screen
The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally, a few non-active pixels may appear on the screen as a fi xed blue, green or red point. Please note that this does not affect the performance of your product.
Electrical device not in the hands of children
Never let children use electrical device unsupervised.
Children can´t always recognize properly the possible dangers.
Batteries / accumulators can be life threatening when swallowed. Store batteries unreachable for small children. In case of swallowing a battery medical aid has to be sought immediately. Also keep the packaging foils away from children. There is danger of suffocation.
The Standby / On button doesn´t separate this device completely from mains. Moreover the device consumes power in the standby operation. In order to separate the device completely from mains, the mains plug has to be pulled from the mains socket. Because of that the device should be set up in a way, that an unobstructed access to mains socket is guaranteed,
so that in case of emergency the mains plug can be
pulled immediately. To exclude the danger of fi re, the power cord should principally be separated from the
mains socket prior to a longer period of non-usage,
i.e. during vacations.
Overview of the Remote Control
Standby / On1.
Image size / Expand (in TXT mode)2.
Sleep timer3.
Numeric buttons4.
Return / Exit (in DTV mode) / Index page (in 5. TXT mode)
Cursor up / TXT up page6.
Cursor left 7.
Programme up / Page down (in DTV mode)8.
Programme down / Page up (in DTV mode)9.
Mono-Stereo / Dual I-II / Current Language(in 10. DTV mode)
Swap11.
Electronic programme guide (in DTV mode)12.
Info / TXT reveal (in TXT mode)13.
Picture mode selection14.
Source selection15.
Red / Sound Menu / Channel List (in DTV 16. mode)(*)
Green / Picture Menu / Subtitle On-off (in DTV 17. mode) (*)
Yellow / Feature / Current language (in DTV 18. mode) (*)
Menu On-off19.
Blue / Install / Favourite mode (in DTV mode) 20. (*)
OK / Select (analogue TV mode) / Hold (in TXT 21. mode) / Channel List (DTV mode)
Cursor right / Subpage (in TXT mode)22.
Cursor down / TXT Downpage23.
Volume up24.
Volume down 25.
Mute26.
Teletext / Mix / 27.
Subtitle (in DTV mode) / TXT Subtitle (analague 28. TV mode)
FAV (*) (Favourite Selection)(in DTV mode)29.
Media Player buttons30.
29
RETURN
FAV
LANG.
EPG
INFO
SOURCESLEEP SCREEN
MENU
SUBTITLE
/
PRESETS
28
30
(*) Only available for EU country options. Note: Buttons that are not indicated with a number on the remote control illustration are not functional in TV mode. Remote range is approximately 7m/23ft
LCD TV and Operating Buttons
FRONT and REAR VIEW SIDE VIEW Control Buttons
Up button1.
Down button2.
Programme/Volume / AV 3. selection button
Standby / On button4.
Note:You can use “+/-” buttons to change volume. If you want to change channels, press P/V/AV button once and then use “+/-” buttons. If you hold the P/V/AV button about a few seconds, source OSD will be displayed. Main menu OSD cannot be displayed via control buttons.
Viewing the Connections- Back Connectors
SCART socket inputs or outputs for external devices.1. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
PC Input is for connecting a personal computer to the TV set. 2.
SPDIF
Coax.OUT
Connect the PC cable between the PC-VGA INPUT on the TV and the PC output on your PC. Component Video Inputs (YPbPr) are used for connecting component video. You can use PC-VGA input to enable YPbPr signal connection with a device that has component output. Connect the YPbPr to PC cable between the PC INPUT on the TV and the component video outputs of your device.
S/PDIF Coaxial Out3. outputs digital audio signals of the currently watched source. Dolby D Audio is bypassed while in media browser mode only.
RF Input connects to an antenna or a cable system.4. Note that if you use a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
5. HDMI 1: HDMI 1 input HDMI Input is for connecting a device that has an HDMI socket. Your LCD Television is capable of displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p signals. No sound connection is needed for an HDMI to HDMI connection
HDMI 1
VGA
SCART
When you use the wall mount kit (optional) with the LCD TV, we would defi nitely recommend to plug all your cables into the back of the LCD before mounting to the wall.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section
USB Input (functional in DTV mode only2.
Video Input is used for connecting video signals of external devices.3. Connect the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices. 4. Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device. Also to enable PC/YPbPr sound connection in such a case, use an appropriate audio cable between the connected device’s audio outputs and the TV’s audio inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
Headphone jack is used for connecting an external headphone to the 5. system. Connect to the HEADPHONE jack to use headphones.
Power Connection
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
SPDIF
Coax.OUT
VGA
SCART
HDMI 1
English - 8 -
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC
to the LCD TV. Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection.
• When the connection is made, switch to PC-VGA
source. See “Input selection” section.
• Set the resolution that suits your viewing requirements.
Resolution information can be found in the appendix parts.
HDMI 1
VGA
SPDIF
Coax.OUT
SCART
Audio Inputs
PC Input
Using Side USB Input
• You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/play music,photo or video fi les stored in a USB stick.
• It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV.
• You may back up your fi les before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any fi le damage or data loss.
• The TV supports only FAT32 disk formatting. NTFS format is not supported. If you connect a USB disk with NTFS format, “usb is unformetted” osd will be displayed.
• Do not pull out USB module while playing a fi le.
CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself .
USB Memory Connection
• Plug your USB device to the USB input of the TV.
Note: USB hard disk drives are not supported.
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
PC RGB cable (not supplied) to PC input
5Vdc-Max:500mA
Connecting to a DVD Player
SCART socket
Decoder
DVD Recorder
Video Recorder
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through COMPONENT SOCKETS. YPbPr can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable. To enable sound connection, use AUDIO IN located side of the TV
• When the connection is made, switch to YPbPr source. See, “Input selection” section.
• You may also connect through the SCART socket. Use a SCART cable as shown below.
(YPbPr cable is not supplied).
Using Side AV Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied.
• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts.
• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV
Headphone
Camcorder
Connecting Other Equipment via Scart
Most devices support SCART connection. You can connect a; DVD recorder or a VCR to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.
For more information, refer to your device’s own instruction book.
Scart socket
Note : These methods of connection perform the same function but in different levels of quality. It is not necessary
to connect by all three methods.
YPbPr to PC
cable (optional)
Component
audio inputs
DVD Player
HDMI input
English - 10 -
Inserting Batteries into the Remote Control
• Remove the battery cover located on the back of the remote control by gently pulling backwards from the indicated part.
• Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover.
Note : Remove the battery from remote control when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries.
Input Selection
Once you have connected external systems to your TV, you can switch to different input sources.
• Press SOURCE button on your remote control for directly changing sources.
or
• Select “Source” option from the main menu by using “ “ ” button to highlight an input and press “ ” button to select.
Note : With the “ ” or “ ” buttons you can set Off or On. When Off is selected; this source does not appear in the OSD when you press the AV / Source button of the remote control. (except for the TV source).
” or “ ” button. Use then “ ” or
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC 50 Hz.
• Then the standby LED lights up.
• To switch on the TV from standby mode either:
• Press the “ on the remote control.
• Press the -P/CH or P/CH+ button on the TV. The TV will then switch on.
Note : If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Press the “ ” button on the remote control or press the STANDBY switch, so the TV will switch to standby mode.
To power power cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.
” button, P+ / P- or a numeric button
down the TV completely, unplug the
Note : YPbPr mode can be used only when you connect a device that has a YPbPr output through the PC-VGA input with YPbPr to PC cable (YPbPr cable is not supplied).
Basic Operations
You can operate your TV using both the remote control and onset buttons.
Operation with the Buttons of the TV
Main menu OSD cannot be displayed via control buttons. “+/-” buttons will function as volume up/down as default. Even if you set other functions for these buttons, “+/-” buttons will perform as default after a short while.
Volume Setting
• Press “+/-” buttons to increase or decrease volume, so a volume level scale (slider) will be displayed on the screen.
Programme Selection
• Press P/V/AV button once and then use “+/-” buttons to select the next or previous programme.
AV Mode
• Hold the “P/V/AV ” button, source OSD will be displayed.Use “+/-” buttons to select the desired source.
Operation with the Remote Control
• The remote control of your TV is designed to control all the functions of the model you selected. The
English - 11 -
functions will be described in accordance with the menu system of your TV.
• Functions of the menu system are described in the following sections.
Volume Setting
• Press “V+” button to increase the volume. Press “V-” button to decrease the volume. A volume level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next Programme)
• Press “ P - ” button to select the previous programme.
• Press “ P + ” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10-500 (for IDTV) or 10-199 (for analogue), press the numeric buttons consecutively
• Press directly the programme number to reselect single digit programmes
Initial Settings
When the TV is turned on for the fi rst time, the menu for the language selection appears on the screen. The message “Welcome please select your language!” is displayed in all language options sequentially in the OSD.
By pressing the “ language you want to set and press OK button. Afterwards, “First time installation” OSD will appear on the screen. By pressing “ ” or “ ” buttons, select the country you want to set and press OK button (* for EU countries).
Note: Country selection OSD will not be available for UK.
Press OK button on the remote control to continue and the following message will be displayed on the screen:
• To select the “Yes” or “No” option, highlight the item by using “ ” or “ ” buttons and press the “OK” button.
The IDTV will automatically tune to the UHF or VHF(*) (* for EU countries) transmission channels, searching for digital terrestrial TV broadcasts and displaying
” or “ ” buttons highlight the
English - 12 -
the names of channels found. This process will take about a few minutes.
After Automatic Search is completed, the following message asking for analogue channel search appears on the screen:
To search for analogue channels, select “Yes”. TV switches to the analogue TV mode. The menu is displayed to search for analogue channels.
Select your Country, Language and Text language by using “
OK or RED button to continue. To cancel, press the BLUE button.
For more information on this process, see “Install Menu” section.
Note : For proper functioning of digital teletext in DTV mode, you should set country as UK in analogue AUTO PROGRAM (for UK broadcasts only).
Do not turn off the TV while initializing fi rst time installation.
” or “ ” and “ ” or “ ” buttons. Press
General Operation
Press the “SOURCE” button on the remote control and select DTV to switch the TV set to digital terrestrial television broadcasting.
Information Banner
• Whenever you change channel, using the P- / P+ button or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode). This will remain on the screen for a few seconds.
• The information banner can also be displayed at any time while watching TV by pressing the “INFO” button on the remote control:
If the selected channel is locked, you must enter the correct four numeric code to view the channel. “Enter PIN” will be displayed on the screen in such a case:
Loading...
+ 30 hidden pages