Hitachi L22DP03U User Manual

22" LCD Colour Television

with integral DVD player

L22DP03U

2

Instructions for use

GB

Contents

Features ............................................................... 3

Accessories ......................................................... 3

Introduction ........................................................... 4

Preparation ........................................................... 4

Safety Precautions ............................................... 4

Power Source .................................................. 5

Power Cord ...................................................... 5

Moisture and Water .......................................... 5

Cleaning ............................................................ 6

Ventilation ......................................................... 6

Heat and Flames ............................................... 6

Lightning ........................................................... 6

Replacement Parts ............................................ 6

Servicing ........................................................... 6

Waste Disposal ................................................. 6

Information for Users in European Union

Countries .......................................................... 6

Disconnecting the Device ................................. 6

Headphone Volume ........................................... 7

Installation ......................................................... 7

LCD Screen ...................................................... 7

Warning ............................................................ 7

Overview of the Remote Control .......................... 8

LCD TV and Operating Buttons ............................ 9

Viewing the Connections ................................... 10

Power Connection .............................................. 12

Aerial Connection ............................................... 12

Connecting the LCD TV to a PC .......................... 13

Connecting an external DVD Player ................... 14

Using Other Connectors ..................................... 15

Connecting Other Equipment via Scart ............... 16

Inserting Batteries in the Remote Control

Handset .............................................................. 17

Handling the Remote Control ........................... 17

Operating Range for the Remote Control ............ 17

Switching the TV On/Off .................................... 18

To Switch the TV On ...................................... 18

To Switch the TV Off ...................................... 18

Input Selection .................................................... 18

Basic Operations ................................................ 19

Operation with the Buttons on the TV ............ 19

Volume Setting ............................................ 19

Programme Selection .................................. 19

Entering Main Menu ..................................... 19

AV Mode ..................................................... 19

Operation with the Remote Control ............. 19

Volume Setting ............................................ 19

Programme Selection (Previous or Next

Programme)................................................. 19

Programme Selection (Direct Access) ........ 19

Initial Settings ...................................................... 20

General Operation .............................................. 20

Information Banner on DTV............................. 20

Electronic Programme Guide (EPG)................. 21

Displaying the Subtitles ................................... 22

Digital Teletext ................................................. 22

Over Air Download ......................................... 23

Widescreen .................................................... 23

IDTV Menu System ............................................. 23

Channel List .................................................... 23

Navigating the Entire Channel List ............... 24

Deleting the Channels in the Channel List ... 24

Renaming Channels .................................... 24

Adding Locks to Channels .......................... 24

Setting Favourites ....................................... 25

On Screen Help ........................................... 25

Installation ....................................................... 25

Add New Channels ..................................... 26

Automatic Search ................................. 26

Manual Search ...................................... 26

Configuration .................................................. 27

Audio Language .......................................... 27

Subtitle ........................................................ 27

Favourite Mode ........................................... 27

EPG Preference .......................................... 27

Receiver Upgrade ....................................... 28

Automatic Download (Automatic

Upgrade) ............................................... 28

Search for New Version (Manual

Upgrade) ............................................... 28

Parental Settings ......................................... 28

Timers ............................................................. 29

Language ........................................................ 30

TV Setup ......................................................... 30

Common Interface ........................................... 30

Navigating the Analogue TV Menu System ......... 31

Analogue TV Menu Map ..................................... 32

Analogue TV Menu System ................................ 33

Sound Menu.................................................... 33

Volume ........................................................ 33

Balance ....................................................... 33

Sound Mode ................................................ 33

Effect .......................................................... 33

Equalizer ..................................................... 33

HP Volume ................................................... 33

Store ........................................................... 33

Picture Menu ................................................... 33

Picture Mode ............................................... 33

Brightness/Contrast/Colour/ ........................ 33

Sharpness/Tint ............................................ 33

Colour Temp ................................................ 34

Picture Zoom ............................................... 34

Store ........................................................... 34

Features Menu ................................................ 34

Sleep Timer ................................................. 34

Language .................................................... 34

Child Lock ................................................... 34

Menu Colour ................................................ 34

Favourite Mode ........................................... 34

Install Menu ..................................................... 34

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:151

- 1 -

Programming ............................................... 34

Programme............................................ 35

Band ..................................................... 35

Channel ................................................. 35

Standard ............................................... 35

Colour System ...................................... 35

Search .................................................. 35

VCR Mode ............................................. 35

Decoder ................................................ 35

Store ..................................................... 35

A.P.S. .......................................................... 35

A.P.S. Country ............................................. 35

Teletext Region............................................ 36

Install menu in AV modes ............................ 36

Programming ......................................... 36

Colour System ...................................... 36

Program Table ............................................. 36

Name .................................................... 36

Move ..................................................... 37

Delete.................................................... 37

APS (Auto Programming System) ......... 37

Favourite Mode ..................................... 37

Program Lock........................................ 37

Enter PIN ............................................... 37

Change PIN ........................................... 37

PC Mode Menu System ....................................... 38

Sound Menu.................................................... 38

Feature Menu.................................................. 38

PC Picture Menu.............................................. 38

Geometry Menu........................................... 38

H. (Horizontal) Position .......................... 38

V. (Vertical) Position ............................. 38

Clock ..................................................... 38

Phase.................................................... 38

Auto Adjustment ................................... 38

Displaying TV Information ................................... 39

Mute Function ..................................................... 39

Personal Preference .......................................... 39

Zoom Modes ....................................................... 39

Auto ............................................................ 39

4:3 ............................................................... 39

16:9 ............................................................. 39

Cinema ........................................................ 39

Subtitle ........................................................ 39

Teletext ............................................................... 40

Tips .................................................................... 41

Screen Care ................................................... 41

Image Persistence .......................................... 41

No Power ........................................................ 41

Poor Picture .................................................... 41

No Picture ....................................................... 41

Sound ............................................................. 41

Remote Control ............................................... 41

Input Sources ................................................. 41

CI Module ........................................................ 41

Appendix A: PC Input Typical Display Modes ...... 42

Specifications ..................................................... 43

Pin Specifications ............................................... 44

Product Guarantee ............................................. 45

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:152

- 2 -

Features

DEF

GHI

MNO

PQR

VWX

WID E

SW A P

• Remote controlled colour television.

• Fully integrated digital TV (DVB-T).

• 100 programmes from VHF, UHF bands or

cable channels can be preset.

• It can tune cable channels.

• Controlling the TV is very easy by its menu

driven system.

• A scart socket for external devices (e.g. video

games, audio set, etc.).

• Stereo sound system (

• Full function teletext .

• Fastext (10 pages), TOP text.

• Favourite channel.

• Channel lock.

• Headphone connection.

• A.P.S. (Automatic Programming System).

• All programmes can be named.

• Forward or backward automatic tuning.

• Sleep timer.

• Child lock.

•Automatic sound mute when no transmission.

• NTSC playback.

• AV in is available.

• It has one HDMI connector for digital video

and audio. This connection is also designed

to accept high definition signals.

• When no valid signal is detected, after 5

minutes the TV switches itself automatically

to standby mode.

• PLL (frequency search).

• PC input.

• Plug & Play for Windows 9X, ME, 2000, XP, Vista.

German + Nicam Stereo).

Accessories

Remote Controller

Instruction Book

ABC

GHI

JKL

YZ

STU

EXIT

P I P

G UI D E

SO UR C E

RC1165

Batteries

2 X AAA

Quick Guide

- 3 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:153

Introduction

Th an k yo u fo r ch o os in g th i s

product. This manual will guide you

in the proper operation of your TV.

Before operating the TV, please

read this manual throughly.

Please do keep this manual in a safe place

for future references.

Preparation

For ventilation, leave a free space of at least

10 cm all around the set. To prevent any fault

and unsafe situations, please do not place

any objects on top of the set.

Use this device in moderate climates.

Safety Precautions

Pleas e rea d the fol lowing re comm ende d

safety precautions carefully for your safety.

SOME DOS AND DON'TS ON THE SAFE
USE OF EQUIPMENT

This equi pment has be en des i g ned and
manufactured to meet international safety
standards but, like any electrical equipment,
care must be taken if you are to obtain the
best results and safety is to be assured.

**************

DO read the operating instructions before you
attempt to use the equipment.

DO ensure that all electrical connections
(including the mains plug, extension leads
and inter-connections between the pieces of
equipme n t ) a r e p ro p e r l y m a d e a n d i n
accorda n c e wi t h the ma n u f a ct u re r ' s
ins tructions. Switch off and withdraw the
mains pl u g before ma k i n g or chan g i n g
connections.

DO consult your dealer if you are ever in doubt
about the installation, operation or safety of
your equipment.

DO be careful with glass panels or doors on
equipment.

DO route the mains lead so that it is not likely
to b e w a l k ed o n , c r u s he d, c h a fe d, o r
subjected to excessive wear and tear or heat.

**************

DON'T remove any fixed cover as this may
expose dangerous voltages.

DON'T obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overhea ting will
cause damage and shorten the life of the
equipment.

DON'T all ow electric al equipm ent to be
exposed to dripping or splashing, or objects
filled with liquids, such as vases, to be placed
on the equipment.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:154

- 4 -

DON'T place hot objects or naked flame
sources such as lighted candles or nightlights
on, or close to equipment. High temperatures
can melt plastic and lead to fires.

DON'T use makeshift stands and NEVER fix
legs with wood screws - to ensure

complete safety always fit the manufacturer's
approved stand or legs with the fixings

provided according to the instructions.

DON'T use equip ment such as perso n al
stereos or radios so that you are distracted
from

the requirements of traffic safety. It is illegal
to watch television whilst driving.

DON'T listen to headphones at high volume,
as such use can permanently damage your

hearing.

DON'T leave equipment switched on when it
is unattended unless it is specifically stated

that it is designed for unattended operation or
has a stand-by mode. Switch off using the

switch on the equipment and make sure that
your family know how to do this. Special

arrangements may need to be made for infirm
or handicapped people.

DON'T continue to operate the equipment if
you are in any doubt about it working

normally, or if it is damaged in any way - switch
off, withdraw the mains plug and consult

your dealer.

ABOVE ALL

--- NEVER let anyone especially children push
anything into holes, slots or any other opening
in the case - this could result in a fatal electrical
shock;

-- - NE V E R gu e s s or ta k e ch a n c e s wi t h
electrical equipment of any kind

--- it is better to be safe than sorry!
*************

Power Source

The TV set should be operated only from a

220-240 V AC, 50 Hz outlet. Ensure that you

select the correct voltage setting for your

convenience.

Power Cord

Do not place any furniture, etc on the power

cord (mains lead) that can pinch the Cord.

Handle the power cord by the plug.

Do not unplug the appliance by pulling the

power cord and never touch the power cord

with wet hands as this could cause a short

circuit or electric shock.

Never make a knot in the cord or tie it with

other cords. The power cord should be placed

in such a way that they are not likely to be

stepped on.

A damaged power cord can cause fire or give

you an electric shock.

When it is damaged and needs to be replaced,

it should be done by qualified personnel.

Moisture and Water

Do not use this device in a

humid or damp environment

(avoid the bathroom, the sink

in the kitchen, and near the

washing machine).

Do not expose this device to

rain or water, as this may be dangerous and

do not place objects filled with liquids, such as

flower vases, on top.

Avoid dripping or splashing near the set.

If any solid object or liquid falls into the cabinet

unplug the TV and have it checked by qualified

personnel before operating it any further.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:155

- 5 -

Cleaning

Before cleaning, unplug the

TV set from the wall outlet.

Do not use liquid or aerosol

cleaners. Use soft and dry

cloth.

Ventilation

The slots and opening s on the TV set are

intended for ventilation and to ensure reliable

operatio n. To pre vent overh eating, these

openings must not be blocked or covered in

anyway.

Heat and Flames

The set should not be placed

near to open flames and sources

of i n t e ns e h e a t s u c h as an

electric heater. Ensure that no

op en flame sou rces, such as

lighted candles, are placed on top of the TV.

Batteries should not be exposed to excessive

heat such as sunshine, fire or the like.

Lightning

In case of storm and lightning or

wh e n going on holiday,

disconnect the power cord from

the wall outlet.

Replacement Parts

When replacement parts are required, make

sure that the service technician has used

replacement parts, which are specified by the

manufacturer or have the same specifications

as th e o r i g i n al on e . U na u t h o r i z e d

substitutions may result in fire, electrical shock

or other hazards.

Servicing

Please refer all servicing to

quali fie d personnel . Do not

remove the cover yourself as

this may result in an electric

shock.

- 6 -

Waste Disposal

Instructions for waste disposal:

• Pack a g i ng and pa c k ag in g aid s are

recyclable and should principally be recycled.

Packaging materials, such as foil bag, must

be kept away from children.

• Batteries, including those which are heavy

metal-free, should not be disposed of with

household waste. Please dispose of used

battery in an environment friendly manner.

Find out about the legal regulations which

apply in your area.

• Col d cat hode flu ores cent lamp in LCD

PANEL contains a small amount of mercury;

please follow the local laws or regulations

for disposal.

Information for Users in European
Union Countries

The mark is in compliance

with the Waste Electrical and

Electronic Equipment Directive

2002/96/EC (WEEE).

Th e mark ind ic at es the

requirement NOT to dispose the equipment

including any spent or discarded batteries as

unsorted municipal waste, but use the return

an d co l lection sys t ems availabl e . If the

batteries or accumulators included with this

equipment, display the chemical symbol Hg,

Cd, or Pb, then it means that the battery has a

heavy metal content of more than 0.0005%

Mercury, or more than 0.002% Cadmium or

more than, 0.004% Lead.

Disconnecting the Device

The mains plug is used to disconnect TV set

from the mains and therefore it must remain

readily accessible.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:156

Headphone Volume

Exce s sive soun d pressure fro m

earphones and headpho nes can

cause hearing loss.

Installation

To prevent injury, this device must be securely

attached to the wall in accordance with the

installation instructions when mounted to the

wall (if the option is available).

LCD Screen

The LCD panel is a very high technology

product with a b ou t a mill i o n thin fi l m

transistors, giving you fine picture details.

Occasionally, a few non-active pixels may

appear on the screen as a fixed blue, green

or red point. Please note that this does not

affect the performance of your product.

Warning

Do not leave your TV in standby or operating

mode when you leave your house.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:157

- 7 -

Overview of the Remote Control

31

32

ABC

DEF

GHI

JKL

MNO

PQR

STU

VWXYZEXIT+10

DISPLAY

GHI

RETURN

SUBTITLE

OPEN/CLOSE

SUBTITLE

SEARCH MODE

INFO

Standby

Switch to TV

Mono-Stereo/Dual I-II

Direct programme

Double digit

Cursor up

Cursor left

Programme up

Programme down

Previous programme

External source

Time/Sub-page/Subtitle on-off

Teletext

Expand/Image size

Reveal/ Switch to PC

Index page/Electronic

Programme Guide (EPG)

Mix

Update

Hold

Personal preference

Tv button(Exit Menu or Teletext)

Volume down

Volume up

Cursor down

Cursor right

Okay

Install

Menu

Feature

Picture/Page down

Sound/Page up

Switch to DVD mode

Switch to DTV mode

Mute

Info/Programme Table

PROGRAM ZOOM

REPEAT

WIDE

AUDIO

ANGLE

TIME

A B

TITLEC

GUIDE

- 8 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:158

LCD TV and Operating Buttons

P/C

H

MEN

U

TV/AV

Poweron/offTV/AVMENUProgrammeUp/Dow

nVolumeUp/Dow

n

TV BUTTON

DVD BUTTON

Search back / Skip back

Search forward / Skip next

Stop

Play / Pause

Open / Close

FRONT VIEW

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:159

TOP VIEW

REAR VIEW

- 9 -

Viewing the Connections

REAR VIEW

HDMI Input are for connecting a device that has an HDMI socket.

Your LCD Television is capable of displaying High Definition pictures from devices such as a

High Definition Satellite Receiver or DVD Player. These devices must be connected via the

HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i signals.

No sound connection is needed for an HDMI to HDMI connection. If you use HDMI to DVI

cable, use PC audio in input to enable sound connection.

Audio Line Outs output audio signals to an external device such as an optional sound

system.

To connect the external speakers to your TV, use AUDIO LINE OUT of the TV with an audio

cable.

He adph o ne jack is used fo r conn ecting an externa l headph one to the system.

Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

Component Video Inputs (YPbPr) are used for connecting component video.

You can connect the component video and audio sockets with a device that has component

output. Connect the component video cables between the

on the TV and the component video outputs of your device.

letters on your TV, “

Note that “Y” input also functions as

devices such as a camcorder to your TV by using

Y”, “Pb”, “Pr” correspond with your device’s connectors.

CVBS Video In jack.This means that you can connect

CVBS Video In jack. Connect the video cable

COMPONENT VIDEO INPUTS on

While connecting, be sure that the

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1510

- 10 -

between the CVBS Video In socket on the TV and the VIDEO OUT jack on your device to make

such a connection.

YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects

to the TV via YPbPr sockets.

Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device

to enable component audio.

PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the

PC INPUT on the TV and the PC output on your PC.

RF Input connects to an antenna or a cable.

Note: that if you use a decoder or a media recorder, you should connect the aerial cable

through the device to the television with an appropriate antenna cable.

SCART inputs or outputs for external devices.

Connect the

SCART cable between SCART sockets on TV and SCART socket on your external

device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART sockets, the TV will automatically

switch to AV mode.

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you

subscribe to. For more information, see “Common Interface” section.

Disc loading slot

Insert a DVD disc into this slot.

NB. press the button on the remote control to select DVD mode.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1511

- 11 -

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you

connect the set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1512

REAR VIEW

- 12 -

Connecting the LCD TV to a PC

For displaying your computer’s screen image on your LCD TV, you can connect your computer

to the TV set.

• Power off both computer and display before making any connections.

• Use 15-pin D-sub display cable to connect a PC to the LCD TV.

• When done, switch to PC source. See, “

• Set the resolution that suits your viewing requirements.

Input selection” section.

REAR VIEW

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1513

- 13 -

Connecting an external DVD Player

SCART

sockets

SCART

cable

RCA

cable

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer to your DVD player’s instruction book for

additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD

player as illustrated below, switch to HDMI source. See, “

• Most DVD players are connected through

RCA SOCKETS. Use a RCA video cable to connect

video input. For enabling audio, use a component audio cable as illustrated below. When

done, switch to F-AV- source. See, “Input selection” section.

• You may also connect through the

SCART . Use a SCART cable as shown below.

SIDE VIEW

HDMI
cable

HDMI

Input

Input selection” section.

REAR VIEW

Note: These three methods of connection perform the same function but in different levels of

quality. It is not necessary to connect by all three methods.

- 14 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1514

Using Other Connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are

shown below.

• To connect external speakers; connect the audio output sockets on the TV to an external

amplifier that is connected to a speaker system.

• Turn on the LCD TV and external speaker set after all connections are made. Refer to your

speaker set’s manual for further queries.

• To listen the sound from headphones, connect to the HEADPHONE jack of theTV.

Note that cables shown in the illustration are not supplied.

SIDE VIEW

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1515

- 15 -

Connecting Other Equipment via Scart

VCR

DVD Recorder

Decoder

Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a

decoder to your LCD TV by using the

are not supplied.

• Power off both the TV and the devices before making any connections.

• For more information, refer to your device’s own instruction book.

REAR VIEW

scart

socket

SCART sockets. Note that cables shown in the illustration

- 16 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1516

Inserting Batteries in the

30

30

ABC

DEF

GHI

JKL

MNO

PQR

STU

VWX

EXIT+10

DISPLAY

GHI

RETURN

SUBTITLE

OPEN/CLOSE

SUBTITLE

SEARCH MODE

Remote Control Handset

• Remove the battery cover located on the back

of the handset by gently pulling backwards

from the indicated part.

• Insert two

in s i de. Pla c e the batt eries in th e right

directions and replace the battery cover.

Handling the Remote Control

• Improper use could cause corrosi on or

battery leakage and may result in physical

injury and/or property damage including fire.

• Never mix used and new batteries in the

device.

• Replace all the batteries in a device at the

same time.

• Remove the batteries if the remote control is

not going to be used for an extended period

of time.

• To avoid possible failure, read the following

instructions and handle the remote control

properly.

• Do not drop or cause impact to the remote

control.

• Do not spill water or any liquid on the remote

control.

• Do not place the remote control on a wet

object.

AAA/R3 or equivalent type batteries

• Do not place the remote control under the

direct sunlight or near sources of excessive

heat.

Note: Remove the batteries from the remote

control when it is not going to be used

for a long time. Otherwise the batteries

may leak and damage the controller.

Operating Range for the
Remote Control

• Point the top of the remote control toward

the LCD TV's remote sensor LED while

pressing a button.

INFO

YZ

AUDIO

ANGLE

TIME

PROGRAM ZOOM

TITLEC

REPEAT

A B

GUIDE

WIDE

Remote range is approximately 7m/23ft.

- 17 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1517

Switching the TV On/Off

Source

YPBPR

To Switch the TV On

• Connect the power cord to the 220-240V

AC,50 Hz.

• Press STANDBY button. Then the standby

LED lights up.

• To switch on the TV from standby mode either:

• Press the

numeric button on the remote control.

• Press the

The TV will then switch on.

No t e : If y o u s wi t c h on y o u r T V v i a

PROGRAMME UP/DOWN buttons on the

remo te control or on the TV set, the

programme that you were watching last

will be reselected.

To Switch the TV Off

• Press the button on the remote control or

STANDBY button on the TV, so the TV will

switch to standby mode.

• To power down the TV completely, unplug

the power cord from the mains socket.

button, P/CH+ / P/CH- or a

P/CH- or P/CH+ button on the TV.

Input Selection

Once you have connected external systems

to your TV, you can switch to different input

sources.

• Press the

until the desired source is highlighted. The

TV will then switch to the selected source

after a short while.

AV button on your remote control

TV

EXT1

F-AV

DVD
PC

DTV
HDMI

• Depending on your selection of working

mode, the remote control buttons’ functions

will change accordingly.

- 18 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1518

Basic Operations

You can operate your TV using both the

remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press - button to decrease volume or + button

to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

• Pre ss +P/CH butto n to selec t the next

programme or

previous programme.

Entering Main Menu

• Press the MENU button to enter main menu.

Inthe Main menu select sub-menus using

or P/CH+ buttons and enter the sub -

CH

menuusing - or + buttons. To learn the usage

of the menus, refer to the menu system

sections.

AV Mode

• Press the TV/AV button at the control panel

on the TV to switch your TV to AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to

control all the functions of the model you

selected. The functions will be described in

accordance with the menu system of your TV.

• Functions of the menu system are described

in the following sections.

Volume Setting

Press V + button to increase the volume.

Press

V - button to decrease the volume. A

volume level scale (slider) will be displayed

on the screen.

P/CH- button to select the

-P/

Programme Selection (Previous or
Next Programme)

• Press P - button to select the previous

program me.

• Press P + button t o se l ec t the n e xt

program me.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to

select programmes between 0 and 9. The TV

will switch to the selected programme.To select

programmes between 10 - 999 (for IDTV), first

press the -/-- button; then numeric buttons

consecutively (e.g.for programme 27, first press

2 and then 7 within 3 seconds. Longer than this

will result in the TV screen changing to the first

number pressed, (in this example 2).

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1519

- 19 -

Initial Settings

Auto. Programming System









When the TV set is operated for the first time,

the IDTV turns on first.

Because this is the first time the TV is used, there

are no channels stored in the memory and the

following message appears on the screen:

Please ensure aerial is plugged in. Do you
want to start first time installation?

Yes

No

Language

Country
Txt. Region

Check the antenna cable

Start : Ok

English

West Europe

Exit : TV

U.K.

• To start installation process, select “Yes”,

to cancel select “No”.

• To select the “Yes” or “No” option, highlight

the item by using

the

OK button.

or buttons and press

The IDTV will automatically tune to the UHF

transmision channels 21 to 68, searching for

digital terrestrial TV broadcasts and displaying

the names of channels found. This process

wi l l ta k e about five mi n u t e s . To cancel

searching, you can press the M button at any

time during the process.

AUTOMATIC SEARCH

Channels:

BBC ONE
BBC TWO
BBC CHOICE

Searching UHF channels 30. Please wait. This will take a few minutes

12 %

MENU

Cancel search

After Automatic Search is completed, the

following message asking for analogue channel

search appears on the screen:

Do you want to search for
analogue channels?

Yes

No

To seach for analogue channels, select “Yes”.

TV switches to the analogue TV mode. The

menu be l o w is displa ye d to s ea r c h for

analogue channels:

- 20 -

Set Language item by pressing  or  button.

Press

and then use

or  button to highlight Country item

or  to set. Press  or

button to highlight Txt. Region. Select a region

by using

or  button. W hen finished, press

OK button to continue. To cancel, press the

TV

button.

For more information on this process, see

Install Menu” section.

“

NOTE: For proper functioning of digital teletext

in DTV mode, you should set

country

as UK in analogue APS.

General Operation

Pressing the TV or DTV button at any time

while watching television programmes will

switch the TV set between displaying the

digital terrestrial television broadcasting and

its normal analogue broadcasting.

Information Banner on DTV

• Whenever you change channel, using the P-

/ P+ button or the numeric buttons, the TV

displays the broadcast picture along with an

inform ation banner at the bo ttom of the

screen. This will remain on the screen for

approximately three seconds.

• The in f o r m a t i on ba n ne r ca n also b e

displayed at any time while watching TV by

pressing the

control:

but t on on the rem ote

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1520

Now: 50/50

Chuckle Vision 13:00-14:00

I

More

Change

Change Time

Next: Ace Lighting

1. BBC ONE

Signal Level:

09:25 - 11:00
11:00 - 11:25

13:15

• The information banner gives information

on th e c h a nn e l se l e c t ed an d th e

programmes on it. The name of the channel

is displa yed , along with its chann el list

number and an indication of the strength of

the signal received.

Hint: N o t al l ch an n e ls b r o a dc a st th e

programme data. If the name and time

of the programme are not available ,

No Information Available” will be

then “

displayed in the information banner.

• Icons are also displayed in the information

banner and if this channel is a favourite

channel, favourite channel icon “ ” will

also be displayed.

If the selected channel is locked, you must

enter the correct four numeric code to view

the ch a n n e l . “

Enter Lo c k Key” wi l l b e

displayed on the screen in such a case:

Enter Lock Key

Electronic Programme Guide (EPG)

• Some, but not all, channels send information

about the current and next events.

• Please note that event information is updated

automatically. If there is no event information

data available in channels, only channel

names with

banner is displayed.

• Press

• In EPG menu, you can easily see the extended

help information by pressing button.

• Press this button again to close this window.

• In the EPG menu, all channels are displayed.

“No Information Available”

GUIDE button to view the EPG menu.

Current channel is highlighted. Use

or

buttons to change channels. Also press

GREEN/RED buttons to scroll up/down the

pages for the channels.

• If yo u hi g h l i g ht an event; short even t

description, extended event description, start

and end times of the event will be displayed

on the screen.

• When the current programme is highlighted,

the box is switched to the highlighted channel

by pressing the

• If you press the

OK button.

OK button when a next event

is highlighted, a reminder is set for the

highlighted programme and a clock appears

across the highlighted channel line.

Programme reminders can be set to signal

that a programme is about to start when you

are watch ing another channel. If you set

reminder for a programme, then you will be

asked for switching to that channel when the

reminder time is reached.

• Press the M button to view the 7 day EPG.

• Press

or button to navigate in Channels

or Programmes.

• Press or button to navigate through the

channel and programme list.

ELECTRONIC PROGRAMME GUIDE(7 Day) Saturday 21/8 13:49

Triple bill. In the Ring/Romany Days/On the Radio: Paul and Barry
grapple with the world of wrestling; hunt for a mysterious Emperor's
underpants; and record their first pop song.

Channels Programmes on Saturday 21/8, 13:00 - 15:00

30. CBBC Channel 13:00 Chuckle Vision (Now)

40. BBC NEWS 24 14:00 Tracy Beaker

41. ITV News 14:55 Newsround

50. Four Text

800. BLUE/LEFT 1k...

801. CCIR17/1kHz...

Navigate

Day

• With RED/GREEN buttons, you can change

the schedule time. By pressing

you ca n advanc e the sc h e d u le

BLU E

YELLOW/

backward/forward of a day.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1521

- 21 -

• If you press button you can see the

I

More

Change

Change Time

Interactive services cannot be used

while subtitles are on. Would you like

detailed help information easily. Press

button again to exit help menu.

• The starting time for

EPG is the current time.

You can see the event information for the

next two hours. By pressing or button,

you can go to the next/previous hours while

Programmes list is highlighted.

• lf you press the

OK button when a next event

is highlighted, a reminder is set for the

highlighted programme and a clock appears

on the screen.

• Programme reminders can be set to signal

that a programme is about to start when you

are watching another channel. If you set

reminder to a programme, then you will be

asked for switching to that channel when the

reminder time is due.

ELECTRONIC PROGRAMME GUIDE(7 Day) Saturday 21/8 13:51

Newsround 16:55-17:00

CBBC joins the Newsround team, keeping you up to date on the latest
stories and events happening at home and abroad.

Channels Programmes on Saturday 21/8, 15:00 - 17:00

30. CBBC Channel 15:00 Even Stevens

40. BBC NEWS 24 15:50 Newsround Showbiz

41. ITV News 16:00 Basil Brush

50. Four Text 16:55 Newsround

51. BBCI

800. BLUE/LEFT 1k...

801. CCIR17/1kHz...

DayNavigate

Displaying the Subtitles

With digital terrestrial broadcasting (DVB-T),

some prog ra m m e s are br o a d c a s t wi t h

subtitles. Subtitles can be displayed while

watching these programmes.

Press the

highlight the

button and press the OK button to display the

configuration menu.

Highlight the “Subtitle” item in configuration

menu and use

Off or a language.

M button to display the main menu,

Configuration line using or

or button to set Subtitle to

- 22 -

If

“Subtitle” is on and a language option is

se t, pressing the

bu tton c a uses th e

following warning message display on the

screen:

to turn subtitles off now?

NoYes

Digital Teletext

With digital terrestrial broadcasting (DVB-T),

in addition to pictures and sound, you can also

view digital teletext.

Digital teletext is sometimes broadcast at the

same time with the normal broadcasting.

• Press the

• The digital teletext information appears.

• Operate it with the coloured buttons, / / /

buttons and OK button.

The operation method may differ depending

on the contents of the digital teletext.

Follow the instructions displayed on digital

teletext screen.

• When “

message appears on the screen, press the

OK button.

• When the

TV returns to television broadcasting.

• With digital terrestrial broadcasting (DVB-

T), in addition to digital teletext broadcasting

at th e s a me ti m e wi th t h e n o r m a l

broadcasting, there are also channels with

just digital teletext broadcasting.

• The aspect ratio when watching a channel

with just digital teletext broadcasting is the

same as the aspect ratio of the pictu re

watched previously.

• When you press the

the digital teletext screen will be displayed.

button.

Press SELECT” button or similar

(Text) button is pressed, the

(Text) button again,

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1522

Over Air Download

Configuration

To ensure that your IDTV always has the most

up-to-da te information, please ensure that,

after use, it is set to standby mode. At 3 A.M.

each day, the IDTV automatically searches for

any new information which may be broadcast

and wil l download th i s to yo u r IDTV

automatically. Th is operation will normally

take approximately 30 seconds.

If you want to perform this, you need to set

Automatic Download to

Upgrade setting.

“Enabled” in Receiver

Widescreen

Depending on the type of the broadcast being

transmitted, programmes can be viewed in a

number of formats. Press the WIDE button

repeatedly to select between

Cinema

When Auto is selected, the format being

displayed is determined by the picture being

broadcast.

PLEASE NO T E: M e n u s i z e c h a n ge s

or Subtitle.

dependin g on t h e

chosen image size.

Auto, 4:3, 16:9,

IDTV Menu System

The IDTV menu can only be viewed when

watch i ng dig ital terrestri a l bro a dcast ing.

Press the DTV button to turn IDTV on while

the TV is in analogue mode.

Press the

on the screen:

Channel List

Using the or button on the remote control,

make sure that the first item, Channel List, is

highlighted and press the OK button to display

the

The following operations can be performed

in this menu:

• Navigating the entire list of channels

• Deleting channels

• Renaming channels

• Adding locks to channels

• Setting favourites

Channel List is the place where the channels

are managed.

M button. The menu below appears

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

Channel List.

- 23 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1523

SELECT

i

SELECT

CHANNEL LIST 1 BBC ONE

1. BBC ONE

SELECT

i

SELECT

CHANNEL LIST 1 BBC ONE

SELECT

i

SELECT

CHANNEL LIST 1 BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Watch More

Navigating the Entire Channel List

Press or button for selecting the previous

or next channel. You can press

RED or GREEN

button to move page up or page down.

To watch a specific channel, highlight it using

or button and then press OK button, while

Select” item on Channel List menu is

the “

highlighted by using

or button.

Then the name and number of the selected

channel will be displayed in the top-left and

top-right of the channel display at the top-right

of the screen, respectively.

Deleting the Channels in the Channel
List

Press or button to select the channel

that will be deleted.

Press or button to select the “Delete’’

item on Chann el List men u. As see n on

Channel List menu, SELECT is displayed next

Delete item at the bottom of the screen to

to

indicate that you must press the

delete the highlighted channel in the channel

list.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Delete More

OK button to

Press the OK button to delete the highlighted

channel in the channel list. Then the message

below appears on the screen:

The selected service will be permanently
deleted. Are you sure?

Yes No

Press or button to highlight the desired

option. If

OK button is pressed while “Yes” is

highlig h t e d , the high l i g h te d ch a n n e l i s

deleted. Selecting “No” cancels the deletion.

Renaming Channels

To rename a sp ecific channel, the chan nel

must be highlig hte d by pressing

or

button. Then highlight the Edit Name item by

pressing

Press the

or button as illustrated below..

OK button to activate the rename

feature.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Edit Name More

Now pressing or button moves to the

previous/next character. Pressing

or

button toggles the current character, i.e., ‘b’

character becomes ‘a’ by and ‘c’ by .

Pressing the numeric buttons ‘

0...9’ replaces

the highlighted character with the characters

printed above the button one by one as the

button is pressed.

Press the M button to cancel the editing or OK

button to save the new name.

Adding Locks to Channels

Channel lo ck i n g p r o v i d e s a p a s s wo r d -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1524

- 24 -

protected access to channels selected by

SELECT

i

SELECT

CHANNEL LIST 1 BBC ONE

SELECT

i

SELECT

CHANNEL LIST 1 BBC ONE

Press the SELECT button on your remote control to tune to the

Configuration

parents. In order to lock a channel you should

know the parental lock password (default

value is set to 0000 in the factory and can only

be changed from the Configuration menu).

Select the channel to be locked by highlighting

it and select the

Lock option by pressing or

button. When the OK button is pressed, a

dialog OSD asking for the password will be

displayed.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Lock/Unlock More

Enter Lock Key

A channel selected as a favourite appears in

the main channel list with a favourites icon

) against the channel name as illustrated

(

below:

NB. favorite mode needs to be activated in the

configuration menu.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Add/Remove... More

On Screen Help

For all menus, press the button to display

the help information about the menu functions.

For Channel L i s t m en u t h e following

message is displayed on the screen:

highlighted channel.
Press MENU to exit this screen.

Enter the password by using the numeric

buttons on the remote control. The lock icon

“ ” will now be displayed next to the selected

channel. Repeat the same operation to cancel

the lock.

Setting Favourites

You can set various channels as favourites

so th a t on l y the favourite ch an n els are

navi gated. To set a favourite you should

highlight the

the Channel List menu.

Us e the or button to hi ghlight th e

“Favourites” item at the base of the screen

and then, in turn, highlight each channel you

want to add to the favourites list, using the

and buttons (or red/green buttons), and

press the

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1525

Favourites item at the bottom of

OK button.

Installation

The Installation menu is mainly intended to

help you for creating a

most efficient way.

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

This menu includes the following items:

• Add New Channels.

• First Time Installation.

- 25 -

Channel Table in the

Add New Channels

First Time Installation

Auto. Programming System









This tuning menu consists of two parts:

• Automatic Search

• Manual Search

Installation

Add New Channels

First Time Installation

Automatic Search

Automatic search is started by pressing the

OK button in the auto-search pop up menu.

All the services will be searched and a channel

table will be created automatically.

All channels found are stored in a sorted form

with respect to their channel numbers. Some

services may not appear with the correct

channel number. If the broadcaster has no

channel information, this may happen due to

missing info.

Manual Search

In manual search, the number of the multiplex

is entered manually and only that multiplex is

searched for the channels. For every valid

channel number, signal level, signal quality

and network name are shown at the bottom

of the screen.

In both manual and auto search, any existing

channel in the database is not re-stored to

avoid redundant duplicates of that channel.

First Time Installation

The user can use this item to load default

settings, which were loaded to the receiver at

the factory.

To install factory settings, highlight

Installation”

menu and press the OK button.

Installation

Add New Channels

Then you will be asked to confirm for deleting

all channels and settings:

Automatic Search

Manual Search

“First Time

- 26 -

Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?

Yes

No

By selecting Yes and pressing the OK button,

the existing channel table will be deleted.

After factory settings are loaded, “First Time

Installation

” menu will be displayed:

Please ensure aerial is plugged in. Do you
want to start first time installation?

Yes

No

Press the OK button to start installation. After

search is completed for digital channels, a

message asking wh e t h e r to se a r c h for

analogue channels appears on the screen:

Do you want to search for
analogue channels?

Yes

No

Press the OK button to search for analogue

channels.The following menu appears on the

screen for analogue channel search:

Language

Country

Txt. Region

Check the antenna cable

Start : Ok

English

West Europe

Exit : TV

U.K.

Set Language item by pressing  or  button.

Press

and then use

or  button to highlight Country item

or  to set. Press  or

button to highlight Txt. Region. Select a region

by using

or  button. W hen finished, press

OK button to continue. To cancel, press the

TV

butto n. The follo wing me nu will be

displayed during the APS process:

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1526

Auto. Programming System

Automatic tuning runs at: 78 %

State: Fine scanning ...

Configuration

i

CONFIGURATION

Parental Settings

Change Default Audio Language

Exit : TV

After APS is finalized, the programme table

will appear on the screen. In the programme

table you will see the programme numbers

and names assigned to the programmes.

If you do not accept the locations and/or the

programme names, you can change them in

the programme table.

Configuration

Press the M button to display the main menu

and pres s the

Configuration. Then press the

display the configuration menu. Press the

button to leave the menu screen.

Th e various confi g u r ation functi o n s ar e

displayed in a list, along with a quarter-screen

image of the currently selected channel. You

can sel ect a function by highlighting the

corresponding menu line using the or

button. Configuration menu will look like this:

button twice to highlight

OK button to

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

- 27 -

Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade

English
Off
Off
Now&Next
V.1.5

Audio Language

Digi tal terrestria l television channels can

broadcast simultaneous soundtracks in more

than one language. This function selects

which language soundtrack you will hear

when switching to a channel broadcasting with

the multiple soundtracks.

Highlight the

Audio Language line in the

Configuration menu and use the or

button to cycle through the language options.

Subtitle

Digi tal terrestria l television channels can

broadcast subtitles displayed on the screen

for hard-of-hearing peo ple. This func tion

M

selects the desired subtitle language and

enables the automatic display of subtitles

whenever subtitle information is broadcast.

Highlight the Subtitle line in the Configuration

menu and use the

through

“Off” and language options.

or button to cycle

Favourite Mode

This function enables or disables the favourite

channel list mode.

Use or button to turn on/off favourite

mode. If the

“Favourite Mode” is on; while in

normal operating mode, pressing

buttons wil l only na viga te through th e

channels that were previously defined as

favourites in the channel list.

EPG Preference

Digi tal terrestria l television channels can

More

P+ and P-

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1627

broadcast simultaneous Next&Now and 7-

i

CONFIGURATION

Parental Settings

Wrong Lock Key

Day electronic programme.

Highlig ht the EPG Pref erence line in the

Configuration menu and use the or

button to select Next&Now or 7-Day.

Receiver Upgrade

Th e IDTV c a n be upgrade d vi a the

configuration menu, entered from the main

menu.

In the con f igurat i on menu , highl i g ht the

“Receiver Upgrade” item by pressing or

button and pres s the OK button to start

upgrade process.

Th e r e are two possibil ities fo r re c e i v e r

software to be upgraded:

manual.

Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade

Automatic Download
Search for New Version

MENU

Exit

English
Off
Off
Now&Next
V.1.5

Enabled

Automatic Download (Automatic Upgrade)

Au tomatic Do wnloa d can be ena bled or

disabled by pressing

enabled, t he n t h e r e a r e t w o ways for

automatic upgrade:

• The first one is checking the existence of a

new software every time the IDTV goes to

standby.

• The second one is being activated at 03:00

A.M. every night, provided that the IDTV is left

in standby mode.

• Both automatic upgrade methods result in

standby mode either the upgraded or not.

If the automatic upgrade is set to “

then this function will not work.

automatic and

More

or button. If it is

Disabled”

- 28 -

Search for New Version (Manual Upgrade)

Manual upgrade starts if the “Search for New

Version”

item is highlighted by using or

button and activated via pressing the OK

button.

“Search for New Version” is activated,

After

the IDTV tunes to each frequency that have

been stored in its database and looks for the

new softwa r e . Du r i n g this process, th e

following OSD is displayed:

Software Upgrade

Searching for upgrade. Please wait, or
press MENU to cancel.

Search Progress:

Parental Settings

Some channels broadcast material which you

do not want younger members of the family to

watch. Any channel can be ‘locked’ so that it

cannot be selected for viewing unless a four-

digit PIN code is entered. In this way, any

channel not suitable for younger viewers can

be prohibited.

This function enables or disables the menu

protection system and allows the PIN code to

be changed.

Use

or button to highlight Parental

Settings

Parental Settings menu. A dialog box asking

for the lock key is displayed:

There is only one key which is set to “0000”

initially. Enter lock key. If wrong lock key is

entered, the following message is displayed

and the TV then returns to the previous menu:

option. Press the OK button to enter

Enter Lock Key

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1628

If it is correct, the Parental Settings menu will

Installation

Configuration

SELECT

i

No Channel Name Start End Date Mode

1. ITV 1 20:00 21:00 12/05/2005 Active

Name:

be displayed including the following items:

Menu Lock

Set Lock Key

There you can set/reset locking for the main

menu or the in sta llation men u to restrict

access. If the menu lock is disabled, there

will be free access to the menu system. Also

in this menu you can change the lock key and

set/change parental lock mode.

Disabled: All menus are unlocked.

Main Menu: Main menu is accessible only

with the correct lock key. So the

user cannot add, delete, rename,

mo ve ch an n e ls , ca n n o t se t

timers.

Installation: Installation menu is locked, so

the user cannot add channels.

Note: Changes will be updated after exiting

configuration menu.

Timers

You can set a timer to switch the TV to any

channel without your intervention. This is also

for making video recordings of programmes

when you are out.

Display the main menu by pressing the

button. Highlight the Timers line by pressing

or button and press the OK button to

display the Timer menu:

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

- 29 -

Up to five separate timer events can be set

and each is displayed in the Timer screen,

showing the event number, the channel to be

selected, the start time, end time, date and

the mode - whether that event is active (and

will be acted on) or not.

TIMER MENU

2. BBC ONE 00:00 00:00 01/01/2005 Inactive

3. BBC ONE 00:00 00:00 01/01/2005 Inactive

4. BBC ONE 00:00 00:00 01/01/2005 Inactive

5. BBC ONE 00:00 00:00 01/01/2005 Inactive

6. BBC ONE 00:00 00:00 01/01/2005 Inactive

Toggle Mode

MENU

Edit Timer More

Exit

• To set an event, highlight its mode button

using the

or button and press the OK

button to display the timer entry window.

3. ITV 1
Start:
End:
Date:
Mode:

00:00
00:00
03/06/2005
Once

• Here the five settings consisting of the

channel name, start time, end time, date and

frequency mode can be set. You can move

freely between each setting using the

buttons.

• The channel name is set using the

M

button to d i s pl ay the chann e l which

broadcasts the programme.

• The start time, end time and date are each

set with the numeric buttons on the remote

control in 24-hour format.

• The frequency mode determines how often

the receiver operates this event and is set

with the

or button to be either Once,

Daily, or Weekly.

If an invalid number for the start or end times

or the date is entered, “Entered time is not

va li d ”

message ap p e a r s o n t h e m e n u

screen.

or

or

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1629

If timer action occurs while the TV is being

Configuration

Configuration

Configuration

watched, the TV switches to the selected

channel. When timer expires, the TV switches

back to the channel which it is switched from.

Language

Some programmes are broadcast in two or

more l a n g ua g e s simultaneou s l y. T h e

language thus can be selec ted from the

Language menu.

• Press the

and use

Language line and press the

M button to display the main menu

or button to hi ghlight the

OK button:

TV Setup

You can use this ite m to disp lay th e TV

functions.

Th e d i gi ta l T V Setup m e n u s c re e n i s

accessed from the main menu. Press the

button to display the main menu and use

or button to highlight “TV Setup”, press the

OK button to display TV Setup menu screen.

Main Menu

Channel List

Installation

M

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

• Use the or button to highlight the

soundtrack language required and press the

OK button. Normal viewing, with the required

language soundtrack, can be resumed by

pressing the M button.

Languages

English

Timers

Language

TV Setup

Common Interface

You can find detailed information for all menu

items in “Analogue TV Menu System” section.

Common Interface

• Press the M button to display the main menu

and use the

“Common Interface” line and press the OK

button:

or button to highlight the

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

It is required to subscribe to a pay channel

company to view the pay channels of the digital

terrestrial broadcasting.

Obtain the Conditional Access Module (CAM)

and the viewing card by subscribing to a pay

- 30 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1630

channel company, then insert those to the TV

For displaying

using the following procedure.

• Switch off the TV and unplug from the mains.

• Insert the CAM, then viewing card to the slot

that is located in the terminal cover at the

left-hand side of the TV (from front view).

• The CAM should be correctly inserted, it is

impossible to insert fully if reversed. The

CAM or the TV terminal may be damaged if

the CAM is forcefully inserted.

• Connect the TV to the mains supply, switch

on and then wait for few moments until the

card is activated.

• Some CAMs may require the following set

up. Please set the CAM by entering the IDTV

menu, Common Interface then pressing the

OK button . (CAM set up me n u is no t

displayed when it is not required.)

• To see the viewing contract information: enter

IDTV; press the

M button, then highlight

Common Interface and press the OK button.

• When no module is inserted, “

Inter face modu le detected

No Common

” message

appears on the screen.

• Refer to the module instruction manual for

details of the settings.

NOTE: Insert or remove the CI module only

when the TV is in

STAND-BY mode or

SWITCHED OFF.

Navigating the Analogue TV
Menu System

For navigation

• Press M to display the main menu.

• Press or button to select an icon. Press

or OK button for more options.

• Use or button to highlight.

• Press or buttons to change the settings.

Press

OK to set as default.

• To exit the menu or return from sub-menu

screen, press

M.

Note: These explanations are valid for the

navigation of the whole menu system.

To select options that are explained in

the following parts, refer to “Navigating

the Analogue TV Menu System”.

menu options

To confir m
choices

- 31 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1631

Analogue TV Menu Map

INSTALL

-Auto Programming System

SOUND

Volume

Balance 0
Sound Mode Stereo
Effect On

Equalizer Off

Back : Menu Exit : TV

PICTURE

Picture Mode Bright

Brightness

Contrast
Colour

Sharpness

Back : Menu Exit : TV

FEATURES

Sleep Timer Off

Language English

Child Lock Off

Menu Colour Gray
Favourite Mode

Back : Menu Exit : TV

Programming

A.P.S.

Txt. region West Europe
Program Table

Back : Menu Exit : TV

SOUND MENU PICTURE MENU

-Volume

-Balance

-Sound Mode

-

Effect

-Equalizer

-Mode

-HP Volume

-Store

-Picture Mode

-Brightness

-Contrast

-Colour

-Sharpness

-Colour

-Picture

-Store

FEATURES MENU INSTALL MENU

-Sleep Timer

-Language

-Childlock

-Menu Colour

-Favorite Mode

-Programming

-Programme

-Band

-Channel

-Standard

-Colour System

-Search

-VCR Mode

-Decoder

-Store

-APS

Off

Temp

zoom

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1632

-Txt. Region

-Program Table

A menu map is provided above. For details of the items,

refer to relevant explanations in the “MENU SYSTEM”.

- 32 -

Analogue TV Menu System

SOUND

Back : Menu







/ 









PICTURE



Sound Menu

Volume

Balance 0
Sound Mod e Stereo

Effect

Equalizer

Volume

When you enter the sound menu, Volume will

be the first selected option. Press

to change the level of the Volume.

Balance

This setting is used for emphasizing the left

or right speaker balance.

Press or button to select Balance. Press

/  button to change the level of the balance.

Balance level can be adjusted between

and + 32.

Sound Mode

Press or button to select Sound Mode.

Using

/  button, you can select Mono,

Stereo, Dual I or Dual II mode, only if the

selected channel supports that mode.

Effect

If you are watching a mono broadcast, set

Effect on to obtain a better sound effect which

will be more stereo-like. If the current sound

system is stereo, switching this effect on will

give a more spatial effect.

Press

or button to select Effect. Press

button to set Effect as On or Off.

On
Off

Exit : TV

/  button

-32

Equalizer

Press or button to select Equalizer. Press

/  button to change the Equalizer setting. In

equalizer menu, the mode can be changed to

Flat, Speech, Music, Personal and Jazz.

Select the desired frequency by pressing /

button and increase or decrease the frequency

gain by pressing

Note: Equalizer menu settings can be changed only

when the mode is in Personal.

/  button.

HP Volume

To adjust headphone volume level, press

or button to select HP Volume. Press  /

button to change the level of the HP Volume.

Store

Select Store by pressing  /  button. Press

or OK button to store the settings. “Stored”

will be displayed on the screen.

Picture Menu

Picture Mode Bright

Brightness
Contrast
Colour
Sharpness

Back : Menu Exit : TV

Picture Mode

For your viewing requirements, you can set

the related

Press

Press

options:

mode option.

or button to select Picture Mode.

or button to choose from one of these

Bright, Standard, Soft and Manual.

Brightness/Contrast/Colour/

Sharpness/Tint

Press or button to select the desired

option. Press

Hint: Tint (Hue) is displayed in picture menu when

the TV receives an NTSC signal.

/  button to set the level.

- 33 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1633

Colour Temp







Sleep Timer

Back : Menu











Programming

Txt. region

West Europe

Program Table

Press or button to select Colour Temp.

Press

options:

/  to choose from one of these

Cool, Normal and Warm.

Note:

• Setting

Cool option gives white colours a

slight blue stress.

• Setting Warm option gives white colours a

slight red stress.

• For normal colours, select Normal option.

Picture Zoom

Picture Zoom setting enables you to select

the aspect ratio of the broadcast.

Select Picture Zoom by pressing / button.

Use

/  buttons to change Picture Zoom to

Auto, 4:3, 16:9, Cinema or Subtitle.

Store

Select Store by pressing  /  button. Press

or OK button to store the settings. “Stored”

will be displayed on the screen.

Features Menu

Language

Press or button to select Language. Use

/  button to select the Language.

Child Lock

Press or button to select Child Lock.

/  button to set the Child Lock On or

Use

Off. When On is selected, the TV can only be

controlled by the remote control handset. In

this case the control panel buttons (except for

STANDBY button) will not work.

the

Hence, if one of those buttons is pressed,

“Child Lock On” will be displayed on the

screen when the menu screen is not visible.

Menu Colour

Press or button to select Menu Colour.

Use

/  button to change menu background

Transparent or Gray.

to

Favourite Mode

Press or button to select Favourite Mode.

Use

/  button to set Favourite mode On or Off

(See the “Program Table” section for details).

Install Menu

FEATURES

Language English
Child Lock Off
Menu Colour

Gray

Exit : TV

Off

Sleep Timer

Press or button to select Sleep Timer.

Use

/  button to set the Sleep Timer.

The timer can be programmed between

and 120 minutes in steps of 10 minutes.

If

Sleep Timer is activated, at the end of the

selected time, the TV goes automatically to

standby mode.

- 34 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1634

INSTALL

A.P.S.

Back : Menu Exit : TV

Programming

Off

Select Programming by pressing / button.

Then press

button to display Programming

menu:

PROGRAMMING

Programme 4

Colour System











Band S

Channel 30
Standard BG

Back : Menu Exit : TV

PAL

Programme

Select Programme by pressing / button.

Press

/ button to select the programme

number. You can also enter a number via the

numeric buttons on the remote control. There

are 100 programme storage between 0 and 99.

Band

Band can be selected either C or S. Press

/ button to select Band.

Channel

Select Channel by pressing / button.

Channel can be changed by pressing

/

button or the numeric buttons.

Standard

Select Standard by pressing / button. Use

/ button to change the standard to B/G,

D/K, I or L/L'.

Colour System

Select Colour System by pressing / button.

/  button to change the colour system

Use

to

PAL, SECAM or AUTO.

Search

Select Search by pressing / button. Press

/  button to start search. The search will

stop when a signal is found.

Note: If you press the buttons with one-step moves,

a frequency of 0.25 Mhz will be advanced.
However if you press the buttons for more than
3 seconds, it will advance automatically. To
stop searching at a certain time, you may press

/ buttons.

VCR Mode

Select VCR Mode by pressing / button.

Use

/  buttons to set VCR Mode as On or Off.

Hint: If you want to watch a DVD , then you

have to set this item as

Off.

Decoder

You can use this mode to connect any decoder to
your TV.

Select Decoder by pressing / button. Press

the

/  buttons to turn it On or Off.

When you switch the Decoder setting to

Off,

EXT-1 output will be mute d. In this case,

EXT-1 output will not be available to display

video. If it is switched on, the

EXT-1 output will

be the selected video source. Any decoder can

be connecte d t o E X T- 1 t o un sc r a mb le

required video signals.

Hint: Decoder setting should be stored separately

for each programme.

Store

Select Store by pressing  /  button. Press

or OK button to store the settings. “Stored”

will be displayed on the screen.

A.P.S.

Select A.P.S. by pressing  /  button. Press

button to enter the A.P.S. submenu:

Auto. Programming System

Country

Warning! All prestored programs
will be deleted

Start : Ok
Back : Menu

U.K.

Exit : TV

A.P.S. Country

Press / button to set your country..

- 35 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1635

If you want to exit from A.P.S. function, press

Auto. Programming System

Automatic tuning runs at: 78 %





PROGRAMMING

Colour System



Program Table



TV

the

When you press

button. For going back, press M.

OK button for starting APS,

all stored programs will be erased and the

following screen will be displayed:

PAL

VCR Mode
Store

Back : Menu Exit : TV

Off

Colour System

Select Colour System by pressing  /

button. Press / button to change the colour

system to

PAL, SECAM or AUTO.

Program Table

P01

State: Fine scanning ...

Exit : TV

Whenever you press the

TV

button, A.P.S.

function stops and program table appears on

the screen.

If you wait until the end of A.P.S., Program Table

is displayed with the programmes found and

located.

Teletext Region

Select Txt. region by pressing  /  button.

Using

There are five options to select:

East Europe, Turk/Gre, Cyrillic

Hebrew

/  buttons, select your teletext region.

West Europe,

and Arabic/

.

Install menu in AV modes

The following screen appears in the install

menu:

INSTALL

Programming

Txt. Region

Back : Menu Exit : TV

Programming

Select Programming by press ing  /

button. After pressing button, programming

menu appears on the screen:

West Europe

- 36 -

P01 BBC 1

P02 C 04
P03 P13
P04 P14
P05 P15
P06 P16
P07 P17
P08 P18
P09 P19
P10 P20

Delete
Name

P11
P12

Move
A.P.S

Exit: TV

Program Table lists the channels that are

stored in the memory. By moving the cursor in

four directions, you can reach 20 programmes

in the same page. You can scroll up or scroll

down to see all the programmes while in TV

mode by pressing the navigation buttons. By

cursor action, programme selection is done

automatically.

Name

To change the name of a programme, select

the desi r e d p r o gr a m m e and p r e s s t he

YELLOW button.

The first letter of the selected name starts to

blink. Press  /  button to change that letter

and

/  button to select the other letters. By

pressing the

YELLOW button, you can store

the name.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1636

Move

You May Unlock this Program

Enter old PIN

Enter new PIN

Select the programme that you want to insert

by using the navigation buttons. Press the

GREEN button. Using navigation buttons, move

th e selected program m e to the decid e d

programme space and press the GREEN

button again.

Delete

To delete a programme, press the RED button.

Pressing the

RED button again eras es the

selected programme from the programme list

and the programmes below shift one line up.

APS (Auto Programming System)

When you press the BLUE button for APS, Auto

Programming System

menu will appear on

the screen.

Favourite Mode

You can set various channels as favourites

so th a t on l y the favourite ch an n els are

navigated. To set a favourite, use the navigation

buttons to select a channel and then press

the item. The channel selected as a

favourite appears in the Program Table with a

favo urites icon ( ) against the channel

name. For removing a favourite, carry out the

same operation. To exit, press M.

Program Lock

Program Loc k

Enter PIN

Change PIN

Back : Menu Exit : TV

Pr o g r a m Lo c k i n g pr o v i de s a pa s s word-

protected access to channels selected by

parents. In order to lock a channel you should

know the Program Lock password (default

value is set to 0000 in the factory and can only

be changed from the

Program Lock menu).

Enter PIN

Select the channel that you desire to lock by

highlighting it and then press the

When the

button is pressed, Program Lock

button.

menu will be displayed on the screen. After

entering the pin code, desired channel will be

locked. The program lock icon will appear next

to th e ch a n n el name. Whe n th e lo c k e d

channel is selected through P+ or P- buttons,

the follo wing warnin g s c r e e n w i l l b e

displayed:

Program Is Locked!

from Program Table.

Change PIN

Select Change PIN by pressing / button.

button to change the PIN code. After

Use

pressing

appears on the screen:

Program Lock

Back : Menu Exit : TV

Enter old PIN cod e thr ough the nume ric

buttons and then enter your new PIN code.

Program Lock menu will be displayed on the

screen when you enter the new PIN code:

Program Lock Menu will again be displayed

after a short while of the identification of new

PIN.

Hint: If you forget your Program Lock password, you

button, the following message

Program Lock

Back : Menu Exit : TV

can deactivate the Program Lock by using the
code 7910 and be able to set new password for
future use. Thus, do keep this code in a safe
place for future reference.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1637

- 37 -

PC Mode Menu System

GEOMETRY

H Position

V Position









See the “Connecting the LCD TV to a PC”

section for connecting a PC to the TV set.

For switching to

on your remote control and select

Note th a t PC mo d e men u settin g s are

available only while the TV is in PC source.

Sound Menu

The items in this menu are desc ribed at

“Sound Menu” section explained in the “Menu

System” section.

Feature Menu

Feature menu settings are identical to the

settings explained in “

in the “Menu System” section.

PC Picture Menu

Select PC Picture menu by pressing  / button

and then press

appears on the screen.

Colour Temperature adjustments in this menu

are identical to adjustments defined in TV picture

menu in “Menu System” part.

Geometry Menu

Select the fourth icon by pressing  / button

and then press

appears on the screen:

PC source, press the AVbutton

PC input.

Feature Menu” section

button. PC Picture menu

Brightness, Contrast and

button. Geometry menu

H. (Horizontal) Position

This item shifts the image horizontally to right

hand side or left hand side of the screen.

Select H. position by pressing / button.

Use

/  button to adjust the value.

V. (Vertical) Position

This item shifts the image vertically towards

the top or bottom of the screen.

V. position by pressing / button.

Select

Use

/  button to adjust the value.

Clock

adjustments correct interference that

Clock

appear as vertical banding in dot intensive

presenta t i o n s like s pr e ad s he e ts or

paragraphs or text in smaller fonts.

Select Clock by pressing / button. Use  /

button to adjust the value.

Phase

Dependin g on the re s ol ut i o n an d scan

frequency that you input to the TV set, you may

see a hazy or noisy picture on the screen. In

such a case, you can use this item to get a

clear picture by trial and error method.

Select

Phase by pressing / button. Use

/  button to adjust the value.

Auto Adjustment

If you shift the picture horizontally or vertically

to an unwanted position, use this item to put

the picture into correct place automatically.

Auto Adjustment item by using /

Select

buttons. Press  or OK button.

Warning: Auto position adjustment recommended

to be done with the full screen image for
the proper adjustment.

Clock

Phase
Auto Adjustment

Back : Menu Exit : TV

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1638

- 38 -

Displaying TV Information

Programme Number, Programme Name,

Sound Indicator

are displayed on the screen when a new

programme is entered or button is pressed.

and Zoom Mode information

4:3

Use to view a normal picture (4:3 aspect ratio)

as this is its original size.

Mute Function

Pr ess but ton to disab le soun d. Mute

indicator will be displayed in the upper side

of the screen.

To cancel mute, there are two alternatives; the

first one is pressing the

second one is increasing the volume level.

button and the

Personal Preference

Press PP button to adopt the previous settings

that you had stored before.

Zoom Modes

You can change the aspect ratio of the TV for

viewing the picture in different zoom modes.

Press WIDE button to directly change the zoom

mode. Available zoom modes are listed below:

Auto

When a WSS (Wide Scree n Signalling)

signal, which shows the aspect ratio of the

picture, is included in the broadcast signal or

the signal from an external device, the TV

au t omatical l y changes the

according to the

• When the

correctly due to poor

when you want to change the

change to another

WSS signal.

AUTO mode does not function

WSS signal quality or

ZOOM mode manually.

ZOOM mode

ZOOM mode,

16:9

This uniformly stretches the left and right sides

of a normal picture (4:3 aspect ratio) to fill the

wide TV screen.

• For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect

ratio), use the 16:9 mode to restore the

picture to its original shape.

Cinema

This zooms up the wide picture (16:9 aspect

ratio) to the full screen.

Subtitle

This zooms up the wide picture (16:9 aspect

ratio) with subtitles to the full screen.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1639

- 39 -

Teletext

Teletext system transmits information such

as news, sports and weather on your TV. Note

that if the signal becomes insufficient, some

text errors may occur or the teletext mode may

be quitted.

Teletext function buttons are listed below:

Teletext On-Off / PAT mode

Activates teletext mode when pressed once.

Pressing this button again will split the screen

into two windows, one displaying the teletext

and the other displaying the current channel.

Pressing again will quit the teletext mode.

Index

Selects the teletext index page.

Mix

Places the teletext screen over the programme.

Expand

Press once to enlarge top half of the page,

press again to enlarge the bottom half of the

page. Press again to revert back to normal

size.

Reveal

Shows hidden information (e.g. solutions of

games).

Hold

Holds a text page when convenient. Press again to

resume.

Subcode Pages / Time

Selects subcode pages if available when the

teletext is activated. When the teletext is not

activated, displays time info if the programme

has teletext transmission.

P+ / P- and numbers (0-9)

Press to select a page.

Note: Most TV stations use code 100 for their

index pages.

- 40 -

Coloured Buttons

(RED/GREEN/YELLOW/BLUE)

Your TV supports both FASTEXT and TOP text

systems. W hen these systems are available,

the pages are divided into groups or topics.

When FASTEXT system is available, sections

in a teletext page will become colour-coded

and can be selected by pressing the coloured

buttons. Press a coloured button that

corresponds to with your needs.

The coloured writings will appear, showing

you, which coloured buttons to use when TOP

text

transmission is present. Pressing P - or

P + co m m a n ds will reque s t th e next or

previous page respectively.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1640

Tips

Screen Care

Clean the screen with a slightly damp, soft

cloth. Do not use abrasive solvents as they

may dam age the coating layer of the TV

screen.

For your safety, unplug the mains plug when

cleaning the set. When moving the TV, hold it

properly from the bottom part.

Image Persistence

Please note that ghosting may occur while

displ aying a persiste nt image. LCD TVs’

image persistence may disappear after a short

time. Try turning off the TV for a while.

To avoid this, do not leave the screen in still

picture for extended periods.

No Power

If your TV system has no power, please check

the main power cable and connection to the

mains socket outlet.

Poor Picture

Have you selected the correct TV system? Is

your TV set or house aerial located too close

to a non-earthed audio equipment or neon

lights, etc.?

Mountains or high buildings can cause double

pictures or ghost images. Sometimes you can

improve the picture quality by changing the

direction of the aerial.

Is the picture or teletext unrecognisable?

Check if you ha v e ente r e d the corr ec t

frequency.

The picture quality may degrade when two

peripherals are connected to the TV at the

same time. In such a case, disconnect one of

the peripherals.

No Picture

Is the aerial connected properly? Are the plugs

connected tightly to the aerial socket? Is the

aerial cable damaged? Are suitable plugs

used to connect the aerial? If you are in doubt,

consult your dealer.

No Picture means that your TV is not receiving

a transmission. Have you selected the correct

button on the remote control? Try once more.

Sound

You cannot hear any sound. Did you perhaps

interrupt the sound, pressing the

Sound is comi n g from on ly one of th e

speakers. Is the balance set to one extreme?

Sound menu.

See

button?

Remote Control

Your TV no longer responds to the remote

control. Perhaps the batteries are exhausted.

If so you can still use the local buttons at the

top of the TV.

Input Sources

If you cannot select an input source, it is

possible that no device is connected.

Check the AV cables and connections if you

have tried to connect a device.

CI Module

If you are experiencing a problem with the CI

module, it is possible that CI module is not

properly inserted. Remove the CI card and

then reinsert.

If the problem persists, it is possible that your

CI module is not recognized. Try inserting a

different CI module.

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1641

- 41 -

Appendix A: PC Input Typical Display Modes

The display has a maximum resolution of 1680X1050 (optional), frequency range of 56-75 Hz.

The following table is an illustration of some of the typical video display modes.

Your TV may not support different resolutions. Supported resolution modes are listed below.

If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

Mode

Res olution

Frequency (Hz)

Horizontal Vertical

1

640 480

60 IBM, VGA
2 720 400 70 IBM, VGA
3 800 600 56 VESA

4 800 600 60 VESA
5
6

640 480
640 480

72 VESA

75 VESA
7 800 600 72 VESA
8 800 600 75 VESA
9 1024 768 60 VESA

10 1024 768 70 VESA
11 1024 768 75 VESA
12 1280 720 60 VESA
13 1280 768 60 VESA

14 1360 768 60 VESA

15

1680 1050 60 *

OPTIONAL

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1642

- 42 -

Specifications

DISPLAY

Size/Diagonal 22" (16:9 Display)

Viewable size / Diagonal 47.47 x 29.71 (cm) / 56 (cm)

VIDEO STANDARDS

Video PAL/NTSC/SECAM
TV Tuner (Analog) PAL/SECAM/B/G/D/K K'I/I' L/L'

VHF (BAND I/II)
UHF (BAND U)
HYPERBAND
CABLE TV (S1-S20 / S21-S41)

100 PRESET CHANNELS

TV Tuner (Digital) MHEG-5 ENGINE compliant with ISO/IEC 13522-5

Profile

Formats Auto, 4:3, 16:9, Cinema or Subtitle

AUDIO German + Nicam Stereo

INPUT CONNECTIONS

Video TV Tuner: IEC 75 Ohm Input Resistance

OUTPUT CONNECTIONS

Audio Line Out: L/R phono sokets

Audio Speaker Output 2 x 4W (RMS) (10% THD)

OPERATOR CONTROL KEYS TV/AV, MENU, P/CH +, P/CH -, VOL +, VOL -, STANDBY.

OPERATING CONDITIONS

Temperature 0º ~ 40ºC (in-oparation)
Air Humidity 20% ~ 80% (no condensation)
Atmospheric Pressure 800 ~ 1114 Hpa

Ukengine Profile 1
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT

Frequency range: 474-850 MHz
Transmission standard: DVB-T, MPEG-2
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9

Audio: MPEG Layer I&II 32/44.148KHz

SCART: CVBS, RGB
HDMI : x 1
YPbPr

Headphones: 3.5mm Jack L/R

POWER SUPPLY

Voltage Supply 220-240VAC
Mains Frequency 50Hz
Power Consumption 75W, 1W Standby

DIMENSIONS AND WEIGHT

Display with stand D x L x H 155 x 525 x 406 (mm)
Display without stand: D x L x H 80 x 525 x 375 (mm)
Weight Display 5.20 kg
Weight Stand 0.30 kg
Weight (net) 5.50 kg

- 43 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1643

Pin Specifications

Signal Input

PC RGB Terminal (D-sub 15-pin connector)

Pin Input signal

1 R
2 G or sync on green
3 B
4 No connection
5 No connection
6 R.GND
7 G.GND
8 B.GND

9 No connection
10 GND
11 No connection
12 [SDA]
13 H.sync or H/V c omposite sync
14 V.sync. [V.CLK]
15 [SCL]

HDMI connector pin specifications

Pin I nput signal Pin Input signal

1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock­3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14 Reserved (N.C. on device)
5 TMDS Data1 Shield 15 SCL
6 TMDS Data1- 16 SDA
7 TMDS Data0+ 17 DDC/CED Ground
8 TMDS Data0 Shield 18 +5V Power
9 TMDS Data0- 19 Hot Plug Detect

10 TMDS Clock+

• When different kinds of input signals are

simultaneously input to the monitor via a graphics

board or the like, the monitor will automatically

select the signals in the following priority order:

Sync signal type Priority

H/V s eparate sync. 1

H/V composite sy nc. 2

sync.on Green * 3

• Even in the case of the recommended

signals shown on the following page,

there may be instances when correct

display is not possible. In this case, use

H/V separate sync, H/V composite sync.

SCART connector pin specifications

Pin Input signal Pin Input signal

1 AUDIO OUT (RIGHT) 12 Not used
2 AUDIO IN (RIGHT) 13 RGB-R GND
3 AUDIO OUT (LEFT/MONO) 14 GND
4 AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN
5 RGB-B GND 16 BLANKING SIGNAL
6 AUDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND
7 RGB-B IN 18 BLANKING SIGNAL GND
8 AUDIO / RGB S WITCH / 16:9 19 COMPOSITE VIDEO OUT

9 RGB-G GND 20 COMPOSITE VIDEO / S.VHS LUMINANCE IN
10 Not used 21 GND / S HIELD (CHASSIS)
11 RGB-G IN

- 44 -

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1644

Product Guarantee

This product is guaranteed against manufacturing defects for a period of

1 Year

This does not cover the product where the fault is due to misuse, abuse, use in

contravention of the instructions, or where the product has been the subject of

unauthorised modifications or alterations, or has been the subject of commercial use

In the event of a problem with the product within the guarantee period please return it to

your nearest store

If the item is shown to have had an inherent defect present at the time of sale, the store will

provide you with a replacement

Your statutory rights remain unaffected

Guarantor; Home Retail Group

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

ENG-01-TV-22856W-1165 UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1645

- 45 -

Contents

General Properties ................................... 47

About this Manual ..................................... 47

Safety Information ...................................... 4 7

Notes on Discs .......................................... 4 8

DVD Control Panel Buttons ...................... 48

Remote Control Buttons ........................... 49

Disc Types Compatible with This Unit:..... 50

DVD Playback............................................ 51

Rapid Advance (Rapid Reverse) ............... 51

Skipping Ahead or Back to Chapters ......... 51

Still Picture (PAUSE) .................................. 5 1

Frame Advance (STEP FORWARD)........... 51

Slow- motion Play Forward ........................ 51

Direct Selection of Scenes ........................ 51

Repeat Play ............................................... 52

Convenient Functions ................................ 52

Using a DVD Menu .................................... 54

Video CD Playback.................................... 54

Basic Play .................................................. 54

Rapid Advance / Rapid Reverse ................ 55

Skipping Ahead or Back to Chapters ......... 55

Still Picture (PAUSE) .................................. 5 5

Frame Advance (STEP Forward) ............... 55

Slow- motion Play ...................................... 55

Direct Selection of Scenes ........................ 55

Repeat Play ............................................... 55

Convenient Functions ................................ 56

CD Menu .................................................... 5 6

Basic Play .................................................. 56

PAUSE ....................................................... 56

Stopping Play ............................................. 56

Skipping Ahead or Back to Tracks ............. 57

ZOOM ......................................................... 57

REPEAT ..................................................... 57

File List Function ....................................... 57

Setup Menu ............................................... 58

MAIN PAGE ................................................. 58

MENU ITEMS .............................................. 58

VIDEO SETUP PAGE ................................. 58

LANGUAGE SETUP ................................... 58

PREFERENCES ........................................ 58

Troubleshooting ........................................ 59

The picture quality is poor (DVD) ............... 59

Disc does not play ..................................... 5 9

Wrong OSD language ............................... 59

The language for the sound or subtitles

on a DVD cannot be changed. ................... 59

Some functions (Angle, Zoom etc) do not

work ........................................................... 59

No picture .................................................. 59

No sound ................................................... 59

Distorted sound ......................................... 59

No response from remote control ............. 59

If nothing works ......................................... 59

Definition of Terms.................................... 60

Angle .......................................................... 6 0

Chapter Number ........................................ 6 0

DVD ............................................................ 60

Playback Control ........................................ 60

Subtitles ..................................................... 60

Time Number ............................................ 60

Title Number .............................................. 60

Track Number ............................................ 60

Video CD .................................................... 60

Dolby Digital ............................................... 60

Dolby Pro Logic ......................................... 60

LPCM ......................................................... 60

MPEG ......................................................... 60

Specifications ........................................... 61

Playback Region Number ......................... 61

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5046

English - 46 -

HOW TO WATCH A DVD

When TV set is turned on, press DVD button on Remote Control and press
play, or directly press play button at the front panel. If there is no disc inside the

DVD

loader, first place a DVD and press play.

General Properties

• DVD / VCD / CD / CD-R / CD-RW / MP3 / JPEG
/ MPEG playback.

• PAL playback (according to disc content)

• User-friendly multilanguage OSD menu con­trol.

•
digital audio outputs. (optional)

• Mult iple Aspe ct Ra tio sup port (16:9
Widescreen, 4:3 Letterbox, 4:3 PAN & SCAN)

• Multi-Audio (up to 8) support (According to disc
content)

• Multi-Subtitle (up to 32) support (According to
disc content)

• Multi-Angle (up to 9) support (According to disc
content)

• 8 level parental control

• Fast forward and rewind in 5 different speeds.
(2x, 4x, 8x, 16x, 32x)

• Slow motion playback in 4 different speeds.
(1/2x, 1/4x, 1/8x, 1/16x forward)

• Frame by frame forward playback.

• Time Search

• Repeat

• A

• Program function for Audio CD, MP3 and JPEG.

• Coaxial & Optical digital audio outputs (op­tional)

• Copied disks may be incompatible.

Note:

*** This DVD player may not support some MP3
recordings due to differences in recording for­mats or disc type.

*** Please read the owner's manual about MP3
playback.

*** CD-R/CD-RW discs recorded by CD-DA
method can be played. Some CD-R/CD-RW
discs may be incompatible due to laser pick-up
and disc design.

*** Some VCD/SVCD discs may be incompat­ible .

*** DVD-R/RW discs recorded by DVD-Video
method can be played . Some DVD-R/RW discs

, LPCM audio via coaxial and optical

B repeat

may be incompatible due to laser pick-up and
disc design.

*** Some discs may be incompatible with JPEG
Viewer function due to different recording for­mat or condition of the discs.

About this Manual

Safety Information
CAUTION

DVD Player is a class 1 laser product. However
this product uses a visible laser beam which
could cause hazardous radiation exposure. Be
sure to operate the player correctly as instructed.

• Manufactured under license from Dolby
Laboratories. “Dolby”, and the double-D
symbol are trademarks of Dolby Laborato­ries.

• DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.

CAUTION

RISK OF ELECTRIC SHOCK

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's enclo­sure that may be of sufficient magni­tude to constitute a risk of electric
shock of persons.

The exclamation point within an equi­lateral triangle is intended to alert the
user to the presence of important op­erating and maintenance (servicing)
instructions in the literature accompa­nying the appliance.

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5047

English - 47 -

Notes on Discs

A

D

/

/

/

/

A

On handling discs

• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

• If the disc is contaminated with any substance
like glue remove before using it.

• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it
in a car parked in direct sunlight as the tem­perature can rise quickly and damage the disc.

• After playing, store the disc in its case.

HOW TO WATCH A DVD

When TV set is turned on, press DVD button on
Remote Control and press play, or directly press
play button at the front panel. If there is no disc
inside the loader, place a DVD first and press play.

DVD Control Panel Buttons

On cleaning

• Before playing, clean the disc with a cleaning
cloth. Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static
spray intended for vinyl LPs.

• This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual prop­erty rights owned by Macrovision Corporation and
other rights owners. Use of this copyright pro­te ction tec hno logy mus t be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless other­wise authorized by Macrovision Corporation. Re­verse engineering or disassembly is prohibited.

F

E

D

C

B

SIDE VIEW

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5048

DVD menu (root menu) is active, this button
functions as “button select” (selects the high­lighted item in menu) if this is not prohibited by
the disc.

Note 1: 8 cm discs should be placed into the

Note 2: Search forward and search back func-

English - 48 -

Disc Loader = Please insert a disc to

the disc Loader.

B

C

E

F

= Open / Close (Eject or Load the

disc)

= Plays/pauses the disc. When

= Stop (Stop playing disc.)

= Search back / Skip back

= Search forward / Skip next

loader in accordance with the indication
marks.

tion will be available when you con­stantly press

or

button.

Remote Control Buttons DVD MODE

1

3

4

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

ABC

DEF

GHI

JKL

MNO

PQR

STU

VWX

EXIT+10

DISPLAY

GHI

OPEN/CL OSE

SUBT ITLE

SEARCH MOD E

Standby On-Of

2

Digits (Press to enter track/chapter/title/

time/etc... numbers directly.)

To enter 2-digit nu mbers

Cursor Up

5

Cursor Left

Play / Pause

Stop

Search Forward

Search Back

Zooms the picture by 2x, 3x, 4x while play-

ing DVD/VCD/SVCD. Pressing zoom but­ton again disables zoom mode.

Pres s to enter file lis t mode to list all the

fi l e s i n the disc . I n file list m o d e , the
same type of files can be played back to­gether in repeat modes.

Press to execute the AA B repeat play if

not prohibited by the disc.

Press to execute disc/title/chapter repeat

if not prohibited by the disc.

Displays the content menu during play-

back or displays the set-up menu during
“Stop & Resume” mode.

Eject/Load

Displays the title menu of the DVD if sup-

ported by the disc or changes the status
of PBC functionality for VCD and SVCD.

Clear

Press to select the unit for search (title,

chapter, track, index, time etc.) if not pro­hibited by the disc.

Changes the playing time display mode

of the disc, title, track etc., on the OSD.

Skip Next

Skip Back

No Function

DVD MENU

Volume Down

Volume Up

Cursor Down

Cursor Right

Executes the items or settings.

C h a nges the an g l e s when pl a ying a
DVD if supported by the disc.

TV MENU

C h anges the l a nguage of t h e sound

while pl aying a DVD if supported by the
disc.

C hange s the lang u age o f the subt itle

while pl aying a DVD if supported by the
disc.

Returns to root menu or resumes play-

back from root menu.

DVD Mode Select

= Mute

INFO

RETURN

SUBTITLE

YZ

AUDIO

ANGLE

PROGRA M

TIME

ZOOM

TITLE

CREPEAT A B

GUIDE

WIDE

English - 49 -

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5049

Disc Types Compatible with This Unit:

This player can play the following discs.

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5050

English - 50 -

DVD Playback

Basic Play

1.

Press on the power button

2. Please insert a disc to the loader.
The disc will be automatically loaded and play

commences if the disc does not have any
menus recorded on it.

A menu may appear on the TV screen after a
few moments or the film may start immediately
after the introduction of the Film Company. This
behaviour depends on the disc content and may
change.

NOTE: Step 3 and 4 is available only when a
menu is recorded on the disc.

3. Press / / / or the number button(s)
to select the preferred title.

4. Press

Play of the selected items now starts.The played
item may be a motion picture, a still picture or
another submenu depending on the disc.

For your reference:

•

If an action corresponding to a button is pro­hibited the”

Stopping Play

Press stop ( ) twice.
To stop the play permanently, press STOP (

twice. When the STOP(
the first time, a message “PRESS PLAY KEY TO
CONTINUE” will appear on the screen to re­mind you if you want to continue the play. To stop
the play, press the STOP (
you can press SELECT to continue.

Stopping Play and Returning To The Menu
Screen:

(When a menu is available on the disc)
Press MENU or TITLE button depending on the

disc. Play is suspended, and the Disc menu
screen is displayed.

Rapid Advance (Rapid Reverse)

Press SEARCH/SLOW ( ) or SEARCH/SLOW
( ) on the remote control during play..

• Normal play is resumed when the SELECT
button or PLAY/PAUSE ( ) button is
pressed.

• The speed of advance ( 2x, 4x, 8x,

press of the

Note: No sound will be heard during Rapid ad­vance or Rapid reverse.

SELECT.

“ symbol appears.

)

) button is pressed for

) button again or

16x, 32x) or reverse ( 2x, 4x,
8x, 16x, 32x) changes for every

or button.

Skipping Ahead or Back to Chapters
Skipping ahead

Press SKIP/ FRAME (

) on the remote

control during play.

A chapter is skipped forward each time the but­ton is pressed.

Skipping back
Press SKIP/ FRAME (

) on the remote

control during play.

When the button is pressed once midway
through a chapter, play returns to the previous
chapter.

Still Picture (PAUSE)

Press PLAY/PAUSE ( ) once during play..
The screen freezes.

To return to normal play press PLAY/PAUSE
(

) again.

Frame Advance (STEP FORWARD)

Press PLAY/PAUSE ( ) once during play..
The screen freezes.
Press SKIP/ FRAME (

) on the remote

control.
The next frame of the movie is displayed.
Y

ou can press SKIP/ FRAME ( ) for the

following frames.

To return to normal play press PLAY/PAUSE
(

) again.

NOTE:

Reverse stepping is not available.

Slow- motion Play Forward

Press PLAY/PAUSE ( ) once during play..
The screen freezes.
Press SEARCH/SLOW (

) on the remote

control.
The unit starts playing the movie at four different

speeds (

1/2, 1/4, 1/8 and 1/

16).

You can increase or decrease the speed of
the slow-motion play by pressing SEARCH/

SLOW ( or ).
The speed of slow motion play is displayed on

the screen each time you change it.
To return to normal play, press PLAY/PAUSE

(

).

NOTE: No sound will be heard during Slow
motion play.

NOTE: Reverse slow motion play is not avail­able.

Direct Selection of Scenes
Selecting Scenes by Chapter Number

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5051

English - 51 -

Press SEARCH on the remote control once
during playback.

The chapter/title search box is displayed on the
screen. You can see the currently playing and
total number of chapters in right hand side of
the display bar as

-- / xx.

Enter the number of the chapter using
number buttons.

The selected chapter is played just after you
enter the chapter number.

For your convenience:

•

If the chapter number you entered is between

0 and 9, player will automatically jump to the
related chapter. To enter a chapter number
which is more than 1 digit, press

+10 key and

then enter the chapter number.

• You can clear the field by pressing the C button
if you enter a wrong number.

• If you attempt to enter a number greater than
the total number of chapters on the current title,
the search box disappears and “ Input In­valid” message is displayed on screen.

• If you wait five seconds without pressing any
key for selecting scenes by chapter number,
the operation is cancelled.

• You can press RETURN key to cancel title
search.

Selecting Scenes by Title Number
Press

SEARCH on the remote control once

during playback.

The chapter/title search box is displayed on the
screen. You can see the currently playing and
total number of titles in left hand side of the dis­play bar as

-- / xx.

Press (Left) or (Right) button on the
remote control to select the title field in the
search box to change the title.

You can see the currently playing title and total
title numbers on the top-left side of the display
as

-- / xx.

Enter the number of the title using number
buttons.

The selected title is played just after you enter
the title number.

Selecting Scenes by Time

You can view the DVD starting from any time
point you want.

Press SEARCH on the remote contro l
“twice” during playback.

The time search box is displayed on the screen
as

Title xx/xx Time -- : -- : --.

Enter the time using number buttons.

English - 52 -

The title is played beginning from the desired
time just after you enter the time. If not prohib­ited by the DVD.

Press SEARCH on the remote control “three
times” during playback.

The time search box is displayed on the screen
as

Chapter xx/xx Time -- : -- : --.
Enter the time using number buttons.
The Chapter is played beginning from the de-

sired time just after you enter the time. If not
prohibited by the DVD.

For your convenience:

•

You can clear the fields by pressing the C but­ton if you enter wrong numbers.

• If you attempt to enter a number greater than

the total time of the current title, the time search
box disappears, “

Input Invalid” message

is displayed on screen.

• If you wait five seconds without pressing any

key to enter time, selecting scenes by time
option is cancelled.

• You can press RETURN key to cancel time

search.

Repeat Play
Repeat Viewing

Press REPEAT during play.
Each time this button is pressed, a different re-

peat box is displayed on the screen.

• If “ CHAPTER” is displayed, the current

chapter will be played again.

• If “ TITLE” is displayed, the current title will

be played again.

• If “ ALL” is displayed, all titles and chapters

will be played again.

NOTE: Repeat play may be prohibited by some
DVD titles.

Repeating two specific points between
sections. (A –B repeat)

Press

A-B during play at the point where

repeat play is to commence (A).

“ A ” is displayed.

Press A-B again at the point where repeat
play is to be concluded (B)

“

AB ” is displayed and the repeat play of the

.

selection between points A and B starts, if not
prohibited by the DVD.

To return to normal play
Press

A-B again.

Convenient Functions
Displaying the time information

Press DISPLAY during play.

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5052

Some information is displayed on TV screen to
indicate the current status of the disc. On the
display screen you can find the following infor­mation lines:

Line 1: Time Counter Mode
Line 2: Title Number, Chapter Number, Time

Counter
Line 3: Audio Number, Audio Format, Number of

Output Channels, Audio Language
Line 4: Subtitle Number & Subtitle Language
Time counter modes can be selected by press-

ing

TIME key consecutively.

The sequence for time counter modes is as
follows: TITLE ELAPSED, TITLE REMAIN, CHAP­TER ELAPSED and CHAPTER REMAIN.

• If “TITLE ELAPSED” is displayed, the elapsed
time for the title is being displayed.

• If “TITLE REMAIN” is displayed the remaining
time for the title is being displayed.

• If “CHAPTER ELAPSED” is displayed, the
elapsed time for the chapter is being displayed.

• If “CHAPTER REMAIN” is displayed, the re­maining time for the chapter is being displayed.

Pressing the

TIME key for the fifth time closes
display menu screen. “DISPLAY OFF” is dis­played.

Displaying a scene with a larger and closer
view

The ‘zoom in’ function enables you to take a
closer look at the scene you are viewing that is
especially an impressive function when you are
seeing science fiction or adventure film.

Press ZOOM during play.
“

2X” is displayed on the screen and the pic­ture is now larger. By pressing
secutively you can reach “

ZOOM key con-

3X”, “ 4X”

modes.
NOTE: You can move in the picture, i.e. change

the zoomed location, by using the

(Left) /

(Right) / (Down) / (Up) arrow keys.

To return to normal play
Press ZOOM again.

Displaying / Changing Subtitle Language

It is possible to change the subtitle language
from the one selected at the initial settings to a
different language, if available.

(This operation works only with discs on which
multiple subtitle languages are recorded.)

Press SUBTITLE during play.
When no subtitles are recorded “

” will be

displayed instead of the selected language.

Press SUBTITLE a number of times until the
preferred language is selected.

When this button is pressed once, the first sub­title recorded on the disc will display. The rest of
the subtitles recorded will display in sequence
for every press of the

SUBTITLE button.

NOTE:

• In some cases, the subtitle language is not
changed immediately to the selected one.

For your convenience:

• When the preferred language is not selected
even after pressing the button several times, it
means that the language is not available on
the disc.

• When the player is restarted or the disc is
changed, the subtitle selection is automati­cally changed back to the initial settings.

• If a language is selected, which is not sup­ported by the disc, the subtitle language will
automatically be set to the disc’s priority lan­guage.

• Usually a circulation will happen while switch­ing to another language, that is you can cancel
the subtitle by pressing this button a number
of times until “Subtitle Off ” appears on the
screen.

Changing Audio Soundtrack Language

It is possible to change the audio language from
the one selected at the initial settings to a differ­ent language, if available.

(This operation works only with discs on which
multiple audio soundtrack languages are re­corded, if not prohibited by the DVD.)

Press AUDIO during play.

Press AUDIO a number of times until the
preferred language is selected.

For your convenience:

• When the preferred language is not selected
even after pressing the button several times, it
means that the language is not available on
the disc.

• When the power is turned on or the disc is
removed, the language heard is the one se­lected at the initial settings. If this language is
not recorded on the disc, only the available
language on the disc will be heard.

Viewing From Another Angle

Some DVD discs may contain scenes, which
have been shot simultaneously from a number
of different angles. For these discs, the same
scenes can be viewed from each of these dif­ferent angles using the ANGLE button.

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5053

English - 53 -

The number of recorded angles differs depend­ing on the disc used.

“ y/x ” is displayed shortly on the screen
during playback. This indicates that the multi­angle scene has just started. From that mo-

m ent on, the y

th

angle of total x angles is played
and you can change the viewing angle until the
end of the multi-angle scene.

• In

SETUP menu, an ‘ANGLE MARK’ option ex­ists, which, if enabled, will display a continu­ous angle mark on the screen as long as multi­angle scene is available.

Press ANGLE during play.
The current angle is changed.

Press ANGLE a number of times until the
preferred viewing angle is selected.

•

This function will only work on discs where

different angles have been recorded.

Using a DVD Menu

Some DVD discs have unique menu structures
called DVD menus. For example, DVDs pro­grammed with complex contents provide guide
menus, and those recorded with various lan­guages provide menus for audio and subtitle
language. Although the DVD menus’ contents
and operation differ from disc to disc, the follow­ing explains basic operation when this feature
is used.

Press TITLE or MENU on the remote control.
The DVD menu available on the disc is now

displayed.
NOTE:

• If you press MENU, the root menu of DVD is
displayed.

• If you press TITLE, the menu of the current title
is displayed.

Press / / / to select the preferred
item.

Press SELECT.
The selected item is now executed.
For your convenience:

• You can also use
DVD menu item. The player will automatically
execute the item. To enter an item number
which is more than 1 digit, press
then enter the item number.

NOTE:

• Some DVDs may not contain root and/or title
menus.

• To resume the playback, select PLAY item in
DVD menu.

number keys to select a

+10 key and

English - 54 -

Video CD Playback

Basic Play

1. Please insert a disc to the loader.

• For Video CDs without playback control:
The disc loaded and play commences.

• For Video CDs provided with playback control:
A menu screen will appear on the screen after

a few moments.
Menu Play

• This function works only with video CDs with
playback control (version 2.0). Follow the in­structions on the menu screen for interactive
operations.

• The details differ depending on the disc con­cerned. Also refer to the instructions accom­panying the disc.

After steps 1 to 3 above, the menus are dis­played on the TV screen.

4. Press the number button(s) to select the

preferred item.
The player now starts to play the selected item.
NOTE:

• Use +10 button to enter two-digit-numbers.

• / / / arrow buttons are not used for

selecting items for video CDs.

What is playback control?

If a video CD has “playback control“ written on
the jacket of disc, it means that particular scenes
or information can be selected for viewing inter­active with TV screen using the menu screen.

NOTE:

• TITLE button is dedicated to PBC “playback
control” during VCD playback. You can change
PBC mode with

• For using Repeat Modes you need to switch
off PBC manually.

• If you use Search mode, PBC automatically
switches to OFF.

• PBC ON is default. Whenever you eject the CD
it will be ON.

Stopping play

• To stop the play permanently, press STOP ( )
twice. When the STOP ( ) button is pressed
for the first time, a message “Press Play Key
To Continue” will appear on the screen to re­mind you if you want to continue the play. To
stop the play, press the
or you can press
tinue.

TITLE button.

STOP ( ) button again

PLAY / PAUSE ( ) to con-

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5054

Rapid Advance / Rapid Reverse
Press

SEARCH/SLOW ( or ) on the

remote control during play.

•

Normal play is resumed when the SELECT

button or PLAY/PAUSE ( ) button is
pressed.

• The speed of advance ( 2x, 4x, 8x,
16x, 32x) or reverse ( 2x, 4x,
8x, 16x, 32x) changes for every

press of the

or button.

Note: No sound will be heard during Rapid ad­vance or Rapid reverse.

Skipping Ahead or Back to Chapters
Skipping ahead

Press

SKIP/ FRAME ( ) on the remote

control during play.

A track is skipped each time the button is
pressed.

Skipping back

Press SKIP/ FRAME ( ) on the remote
control during play.

When the button is pressed once midway
through a track, play returns to the start of previ­ous track. When it is pressed again, a track is
skipped.

Still Picture (PAUSE)

Press PLAY/PAUSE ( ) once during play.
The screen freezes.
To return to normal play press PLAY/PAUSE

(

) again.

Frame Advance (STEP Forward)

Press PLAY/PAUSE ( ) once during play..
The screen freezes.
Press SKIP/ FRAME (

) on the remote

control.
The next frame of the movie is displayed.
You can press SKIP/ FRAME (

) for the

following frames.

NOTE: Reverse stepping is not available.
Slow- motion Play

Press PLAY/PAUSE ( ) once during play..
The screen freezes.
Press SEARCH/SLOW (

) on the remote

control.
You can increase or decrease the speed of

the slow-motion play by pressing SEARCH/
SLOW (
modes as

or ). There are 4 slow motion

1/16, 1/8, 1/4, 1/2.

The speed of slow motion play is displayed on
the screen each time you change it.

English - 55 -

To return to normal play press PLAY/PAUSE
(

) again.

NOTE: No sound will be heard during Slow
motion play.

NOTE: Reverse slow motion play is not avail­able.

Direct Selection of Scenes
Selecting Scenes by Time

You can view the video CD, starting from any
time point you want.

Press SEARCH on the remote control once
time during playback.

The time search box is displayed on the screen
as SELECT TRACK :_ _ / xx

Player goes to entered track of the disc.
Press SEARCH on the remote control two

times during playback.
The time search box is displayed on the screen

as DISC GOTO:_: _ _ : _ _
Player goes to entered time of the disc.
Press SEARCH on the remote control three

times during playback.
The time search box is displayed on the screen

as TRACK GOTO:_: _ _ : _ _
Player goes to entered time of the current track.
Enter the time using number buttons.
The title is played beginning from the desired

time just after you enter the time.
For your convenience:

• If you attempt to enter a number greater than
the total time of the current title, the time search
box disappears and “ Input Invalid” mes­sage appears on up-left corner of screen.

• If you give up entering the time simply press
RETURN button, and the operation is can­celled.

Accessing tracks using number buttons:

You can play any track you want, just by press­ing the corresponding number button.

For the track numbers which are greater than
“9” use +10 button. Press this button once
and then type the two digit track number.

If you attempt to enter a number greater than the
total number of tracks on disc, “

” message

is displayed on the screen.

Repeat Play
Repeat Viewing

Press REPEAT during play.
Each time this button is pressed, a different re-

peat box is displayed on the screen.

• If “ All” is displayed, the whole disc will be

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5055

played again.

• If “ Track” is displayed, the current track will
be played again.

Repeating two specific points between
sections. (A –B repeat)

Press A-B during play at the point where repeat
play is to commence (A).

“

A” is displayed on screen.

Press A-B again at the point where repeat play
is to be concluded (B).

“

AB” is displayed and the repeat-play of the

selection between points A and B starts.
To return to normal play
Press

A-B again. A-B Repeat is disabled.

Convenient Functions

Displaying the time information
Press TIME during play.
Each time this button is pressed, a different time

information box is displayed on the screen.

• If “Single elapsed” is displayed, the elapsed
time for the title which is being played will be
displayed.

• If “Single remain” is displayed, the remaining
time for the title which is being played will be
displayed.

NOTE: If PBC feature is set to OFF then two other
time information modes are also available
which are “Total elapsed” and “Total remain”.

• If “Total Elapsed” is displayed, the elapsed
time for the disc is being displayed.

• If “Total remain” is displayed, the remaining
time for the disc is being displayed.

Pressing the TIME key again closes display
menu screen. “DISPLAY OFF” is diplayed.

Displaying a scene with a larger and closer
view

This ‘zoom-in’ function enables you to take a
closer look at the scene you are viewing. This is
especially an impressive function when you are
watching science fiction or adventure film.

Press ZOOM during play.
“

2X” is displayed on the screen and the pic­ture is now larger. By pressing
secutively you can reach “
modes.

NOTE: You can move in the picture, i.e. change
the zoomed location, by using the
(Right) / (Down) / (Up) arrow keys.

To return to normal play;
Press ZOOM again.

ZOOM key con-

3X”, “ 4X”

(Left) /

CD Menu

CD Menu is used to display the directory struc­ture of data discs which would contain files such
as JPEG/MPEG/MP3 and to display the tracks
of Audio CDs.

Basic Play

1.Please insert a CD-R disc to the loader.
“Loading” message appears on screen. Please

wait for a moment.
CD MENU appears. Directories and the files in

the root directory are listed. (For Audio CD, the
tracks are listed.)

2. Press
In the stop mode or while playing MP3 the user

can navigate in the current directory.

3. Press SELECT,
directories & files.

If a directory is selected and SELECT or “
key is pressed then the selected directory con­tent is displayed after reading directory.

To switch from a sub directory to an upper direc­tory, press SELECT or “
most option in the directory (“...”) is selected or
press “ ”.

4. Press SELECT on a file to play.

MP3/MPEG File :

Selected MP3 / MPEG starts to play.
Elapsed or Remaining Time can be displayed

using DISPLAY key and can be changed using
TIME key.

JPEG File :
Selected JPEG is displayed in full screen and

Slide Show starts automatically.
Audio CD Track:
Elapsed or Remaining Time can be displayed

using DISPLAY key and can be changed using
TIME key.

PAUSE

Press PLAY/PAUSE ( ) once during play..
The play freezes.
PAUSE message appears on screen.
To return to normal play press PLAY/PAUSE

(

Stopping Play

Press STOP ( ).

The play is stopped.

/ to select files or directories.

/ to switch between

” key while the top-

) again.

”

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5056

English - 56 -

NOTE: If a JPEG file is displayed, pressing

MENU also stops the play.

MP3/MPEG: CD MENU is displayed.
Rapid Advance ( Rapid Reverse)

MP3/MPEG Track:

Press SEARCH/SLOW ( or ) during
play to decrease/increase play speed.

32x, 16x, 8x, 4x, 2x, PLAY,Y,

2x, 4x, 8x, 16x, 32x are the

play speed modes.

Skipping Ahead or Back to Tracks

Press SKIP/ FRAME ( / ) during play
to jump to the previous/next file.

Next file in the current directory will be played.
Press SKIP/ FRAME (

/ ) during stop
mode to jump to the previous/next page of the
current directory.

ZOOM

MPEG:
This “zoom in” function enables you to take a

closer look at the scene you are viewing that is
especially an impressive function when you are
seeing science fiction or adventure film.

Press ZOOM during play.
“

2X” is displayed on the screen and the pic­ture is now larger. By pressing
secutively you can reach “

ZOOM key con-

3X”, “ 4X”

modes.
NOTE: You can move in the picture, i.e. change

the zoomed location, by using the

(Left) /

(Right) / (Down) / (Up) arrow keys.

To return to normal play;
Press ZOOM again.
JPEG :
Press PLAY

( ) to start slide show..

It is provided both ZOOM in/out and Zoom pan
functions for JPEG pictures.

Press ZOOM to turn on/off this function.
When this mode is on, a message will indicate

the current ratio on screen.
If zoom mode is on,
Press

/ to control the ratio of zoom in/

out.
The zoom ratios are %50 and %75 for zoom out

and %100, %125, %150 and %200 for zoom in.
(The order is: %50, %75, %100, %125, %150,
%200)(The initial ratio is %100)

With ZOOM mode off, a picture is scaled to fit the
whole screen.

Note:

English - 57 -

• Slide Show is disabled when the ZOOM mode
is on.

REPEAT
Press REPEAT to change current repeat mode.

In CD MENU it is displayed at the bottom.
The options available are:
FOLDER: When this mode is selected, the cur-

rent folder will be played once.
SINGLE: When this mode is selected, the cur-

rent track will be played once.
REPEAT ONE: When this mode is selected, the

current track will be repeated continuously.
REPEAT FOLDER: When this mode is selected,

the current folder will be repeated continuously.

Repeating two specific points between
sections. (A –B repeat)

MP3, Audio CD Track:

Press A-B during play at the point where repeat
play is to commence (A).

“

A” is displayed on screen.

Press A-B again at the point where repeat play
is to be concluded (B).

“

AB” is displayed and the repeat-play of the

selection between points A and B starts.
To return to normal play
Press

A-B again. A-B Repeat is disabled.

Display Function

Press TIME to change displayed time mode.
There are two time modes :

• Single Elapsed

• Single Remain

Time is displayed during MP3,MPEG and Audio
CD track playback.

File List Function

Press PROG to select file list mode
All the files in the disc are listed.
The same types of files in the list are played

together sequentially.
If a MP3 file is selected to play then all the MP3

files in the list are played sequentially.
If a MPEG file is selected to play then all the

MPEG files in the list are played sequentially.
If a JPEG file is selected to display then all the

JPEG files in the list are displayed sequentially.
To stop the playback of the files:
If a MP3/MPEG file is played; press

STOP ( ).

If a JPEG file is displayed; press MENU or STOP
(

).

Press PROG to quit file list mode.

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5057

Setup Menu

Video

Video

Press DISPLAY key on the remote control when
the player is not in playback mode.

The setup menu-main page appears. To close
the setup menu, press

MAIN PAGE
In the main page, the first page is selected

by default.

Select pages using / arrow buttons.
When selected, the page will be highlighted and

the items of the selected page will be displayed.
Press SELECT or

selected page.
When entered a page, the first item of the page

is selected and the sub-items of that item are
listed on the right.

NOTE: To return to main page, press arrow
bu t ton. To close the set u p menu, pr ess

DISPLAY key.
USING PAGES

When entered a page, the first item of the page
is selected by default and the sub-items of the
selected item are listed on the right.

Use

/ arrow buttons to change the

selected item in the page.
The sub-items of the selected item are listed on

the right.
Press SELECT or

sub-items of the selected item.

The sub-item is selected on the right menu.

Use / arrow buttons to change the selected
sub-item.

Press SELECT to choose the selected sub­item on the right menu.

DISPLAY key.

arrow button to enter

arrow button to select the

LANGUAGE SETUP

Language Preference

- - Language Setup Page - -

Osd Lang

Audio

Disc Menu

Subtitle

OSD LANG:
You can select the default OSD language of the

player menus
AUDIO:
You can select the default audio language if sup-

ported by the DVD disc.
DISC MENU:
You can select the DVD’s disc menu language

among these languages. Disc menu appears
in the selected language, if supported by the
DVD disc.

SUBTITLE:
You can select the default subtitle language if

supported by the DVD disc.

PREFERENCES

Language Preference

- - Preference - -

Angle Mark

Default

Downmix

Parental

Password

MENU ITEMS

VIDEO SETUP PAGE

TV TYPE:
TV Type is only available as ‘PAL’.

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5058

ANGLE MARK:
This option allows you to turn on /off the angle

mark on the screen, which is displayed to indi­cate that a multi angle scene has started. It also
shows which angle you are currently watching.

DEFAULT:
If you choose RESET and press SELECT, the

factory-presets are loaded. Parental level and
parental password does not change.

DOWNMIX:
This mode can be selected when the digital

audio output of the TV is used.
SURROUND: Surround sound output.
STEREO: Two channels stereo.

English - 58 -

PARENTAL (Parental Level):

Video

7 Nc 17

8 Adult

Language Preference

- - Preference - -

Angle Mark

Standby Time

Default

Downmix

Parental

Password

1 G

2

3 Pg

4 Pg 13

5

6 PG -R

- - Place a disc into the loader.

• Disc incorrectly loaded.

- Ensure that the DVD disc is in the drawer
with the label uppermost.

• Wrong type of disc. The machine cannot play
CD-ROMS etc.

• The region code of the DVD must match the
player.

Wrong OSD language

• Select the language in the set-up menu.

The language for the sound or subtitles on a
DVD cannot be changed.

Playing some DVDs can be limited depending
on the age of users. The “Parental Control” func­tion allows playback limitation level to be set by
the parent.

Parental Level can be adjusted to one of the
eight levels. Level “8 ADULT” adjustment let you
watch all of the DVD titles ignoring the DVD
disc’s parental level. You can watch the DVD
discs, which has the same or lower parental
level than the player’s level only.

PASSWORD (Change Password):
Using this item you can change the current pass-

word.
To change the password you will be prompted

to enter your old password. After you have en­tered your old password, you can now enter the
new 4-digit password.

You can use

C key to delete the incorrect entry.

Note: Factory preset of the password is “0000”.

You have to enter XXXX digital password every
time you want to change the parental level. If you
forget your password please contact technical
service.

Troubleshooting

The picture quality is poor (DVD)

• Make sure the DVD disc surface is not dam-

aged. (Scratch, fingerprint etc.)

• Clean the DVD disc and try again.

- See instructions described in “Notes on
Discs” to clean your disc properly.

• Ensure that the DVD disc is in the drawer with
the label uppermost.

• A damp DVD disc or condensation may effect
the equipment. Wait for 1 to 2 hours in Stand­by to dry the equipment.

Disc does not play

• Multilingual sound and/or subtitles not re-

corded on the DVD.

• Try to change the sound or subtitles using
DVD’s title menu. Some DVD’s do not allow
the user to change these settings without us­ing the disc’s menu

Some functions (Angle, Zoom etc) do not
work

• These functions are not available on the DVD.

• Angle can only be changed when the angle

symbol is displayed.

No picture

• Have you pressed the correct buttons on the

remote control? Try once more.

No sound

• Check the volume is set to an audible level.

• Make sure you have not switched the sound off

accidentally.

Distorted sound

• Check that the appropriate listening mode

setting is correct.

No response from remote control

• Make sure the remote control is in the correct

mode.

• Check batteries are fitted correctly.

• Change the batteries.

If nothing works

If you have tried the above solutions and none
seem to work, try switching your TV-DVD off and
on again. If this does not work, contact your sup­plier or TV-DVD repair technician.

Never attempt

to repair a defective TV-DVD yourself.

• No disc in the machine.

English - 59 -

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5059

Definition of Terms

Angle

Recorded onto some DVD discs are scenes,
which have been simultaneously shot from a
number of different angles (the same scene is
shot from the front, from the left side, from the
right side, etc.). With such discs, the ANGLE
button can be used to view the scene from dif­ferent angles.

Chapter Number

These numbers are recorded on DVD discs. A
title is subdivided into many sections, each of
which are numbered, and specific parts of video
presentations can be searched quickly using
these numbers.

DVD

This refers to a high-density optical disc on which
high-quality pictures and sound have been re­corded by means of digital signals. Incorporat­ing a new video compr ession technology
(MPEG II) and high-density recording technol­ogy. DVD enables aesthetically pleasing full­motion video to be recorded over long periods
of time (for instance, a whole movie can be re­corded).

DVD has a structure consisting of two 0.6-mm
thin discs, which are adhered to each other. Since
the thinner the disc, the higher the density at
which the information can be recorded, a DVD
disc has a greater capacity than a single 1.2
mm thick disc. Since the two thin discs are ad­hered to each other, there is the potential to
achieve double-sided play sometime in the fu­ture for even longer duration play.

Playback Control

This is recorded on a Video CD (Version 2.0).
The scenes or information to be viewed (or lis­tened to) can be selected interactively with the
TV monitor by looking at the menu shown on
the TV monitor.

Subtitles

These are printed lines appearing at the bot­tom of the screen, which translate or transcribe
the dialogue. They are recorded on the DVD
discs.

Time Number

This indicates the playtime, which has elapsed
from the start of a disc or a title. It can be used to
find a specific scene quickly. (Not all discs per­mit the time search feature to be used. Avail­ability is determined by the disc’s manufacturer.)

Title Number

These numbers are recorded on DVD discs.
When a disc contains two or more movies, these
movies are numbered as title 1, title 2, etc.

Track Number

These numbers are assigned to the tracks,
which are recorded on AudioCDs. They enable
specific tracks to be located quickly.

Video CD

This contains recordings of pictures and sound
whose quality is on a par with that of videotape.
This player also supports Video CDs with play­back control (Version 2.0).

Dolby Digital

Many movie theatres are equipped with 5.1 chan­nel surround systems. This same type of tech­nology is available to you in your home. To enjoy
full 5.1-channel surround, your DVD player must
be connected to an external Dolby Digital de­coder via the digital outputs (either coaxial or
optical).

Dolby Pro Logic

This is Dolby Laboratories’ technology to de­code Dolby Surround encoded programs ac­tively. Dolby Surround programs have four chan­nels of audio (Left, Center, Right and Surround)
encoded into a standard 2-channel stereo sig­nal. The rear channel is monaural.

LPCM

LPCM stands for Pulse Code Modulation and is
digital audio.

MPEG

Short for Moving Picture Experts Group. This is
an international standard for compression of
moving images. On some DVDs digital audio
has been compressed and recorded in this for­mat.

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5060

English - 60 -

Specifications

DVD / VCD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG player,

Playback Region Number

Both the DVD player and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.

• Some discs include region codes as shown on the right.

• The number inside the symbol refers to a region of the world, and a disc encoded in a specific
region format can only be played back on DVD player with the same region code.

• The Region Number is described as 2 for this TV set.

English - 61 -

ENG-02-DVD-22856W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF- WO DIVX)-10059170-5 0138225.p6511.11.2008, 08:5061

www.hitachidigitalmedia.com

50138225