Hitachi L19HP04E User Manual

Digital LCD Colour Television

L19HP04E

Instructions for use

Contents

Accessories ............................................................ 2

Features ................................................................. 2

Preparation ............................................................. 2

Safety Precautions ................................................. 2

Power Source ..................................................... 3

Power Cord ......................................................... 3

Warning .............................................................. 3

Disconnecting the Device ................................... 3

Moisture and Water ............................................ 3

Cleaning.............................................................. 3

Heat and Flames ................................................ 4

Lightning ............................................................. 4

Replacement Parts ............................................. 4

Servicing ............................................................. 4

Waste Disposal ................................................... 4

Information for Users in European Union

Countries ............................................................ 4

Headphone Volume ............................................ 4

Installation........................................................... 4

LCD Screen ........................................................ 4

Overview of the Remote Control ............................ 5

LCD TV and Operating Buttons .............................. 6

Viewing the Connections- Back Connectors .......... 6

Viewing the Connections - Side Connectors .......... 7

Power Connection .................................................. 7

Aerial Connection ................................................... 7

Connecting the LCD TV to a PC ............................. 8

Connecting to a DVD Player................................... 8

Using Side AV Connectors ..................................... 9

Connecting Other Equipment via Scart .................. 9

Inserting Batteries into the Remote

Control Handset...................................................... 9

Switching the TV On/Off ......................................... 9

To Switch the TV On ........................................... 9

To Switch the TV Off ........................................... 9

Input Selection ...................................................... 10

Basic Operations .................................................. 10

Operation with the Buttons on the TV ............... 10

Initial Settings ....................................................... 10

General Operation .................................................11

Electronic Programme Guide (EPG) .....................11

Displaying Subtitles ...........................................11

Digital Teletext (** for UK only) ......................... 12

Analogue Teletext ............................................. 12

Widescreen ....................................................... 12

IDTV Menu System .............................................. 12

Channel List ...................................................... 12

Timers ............................................................... 14

Conditional Access ........................................... 14

TV Setup ........................................................... 14

Setup ................................................................ 14

Analogue TV Menu System .................................. 18

Picture Menu..................................................... 18

Sound Menu ..................................................... 19

Feature Menu ................................................... 20

Install Menu ...................................................... 21

Source Menu .................................................... 22

PC Mode Menu System........................................ 22

PC Position Menu ............................................. 22

Displaying TV Information .................................... 23

Mute Function ....................................................... 23

Picture Mode Selection......................................... 23

Freezing Picture ................................................... 23

Zoom Modes......................................................... 23

Auto .................................................................. 23

16:9 ................................................................... 23

4:3 ..................................................................... 23

Panoramic......................................................... 24

14:9 ................................................................... 24

Cinema ............................................................. 24

Subtitle .............................................................. 24

Zoom................................................................. 24

Teletext ................................................................. 24

Tips ....................................................................... 25

Image Persistence ............................................ 25

No Power .......................................................... 25

Poor Picture ...................................................... 25

No Picture ......................................................... 25

Sound ............................................................... 25

Remote Control................................................. 25

Input Sources.................................................... 25

Appendix A: PC Input Typical Display Modes ....... 26

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 27

Speciﬁ cations ....................................................... 28

English - 1 -

Accessories

SELECT

INFO/

ABC

DEF GHI

JKL

MNO

PQR

VWX

STU

RETURN

PRESETS

P+

P-

SOURCE

DTV

SWAP

FAV

SLEEP

SUBTITLE

LANG

SCREEN

Controller

EPG

Remote

Batteries: 2 X AAA

Instruction Book

Quick Guide

Introduction

Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly.

Please do keep this manual in a safe place for future references.

Preparation

For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.

Use this device in moderate climates.

10 cm

Features

• Remote controlled colour LCD TV.

• Fully integrated digital TV (DVB-T).

• HDMI connector for digital video and audio. This connection is also designed to accept high deﬁ nition signals.

•

200 programmes from VHF, UHF(analogue).

• 500 programmes for digital mode (IDTV).

• OSD menu system.

• Scart socket for external devices (such as video, video games, audio set, etc.).

• Stereo sound syste

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• When no valid signal is detected, after 5 minutes the TV switches automatically to standby mode.

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98,ME,2000,XP, Vista, Windows 7.

• Game Mode.

Safety Precautions

Please read the following recommended safety precautions carefully for your safety.

SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

**************

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat.

**************

English - 2 -

DON’T remove any ﬁ xed cover as this may expose

dangerous voltages.

DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DON’T allow electrical equipment to be exposed to dripping or splashing, or objects ﬁ lled with liquids, such as vases, to be placed on the equipment.

DON’T place hot objects or naked ﬂ ame sources such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to ﬁ res.

DON’T use makeshift stands and NEVER ﬁ x legs with wood screws - to ensure

complete safety always fit the manufacturer’s approved stand or legs with the ﬁ xings

provided according to the instructions.

DON’T use equipment such as personal stereos or radios so that you are distracted from

the requirements of trafﬁ c safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your

hearing.

DON’T leave equipment switched on when it is unattended unless it is speciﬁ cally stated

that it is designed for unattended operation or has a stand-by mode. Switch off using the

switch on the equipment and make sure that your family know how to do this. Special

arrangements may need to be made for inﬁ rm or handicapped people.

DON’T continue to operate the equipment if you are in any doubt about it working

normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult

your dealer.

ABOVE ALL

--- NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock;

--- NEVER guess or take chances with electrical equipment of any kind

--- it is better to be safe than sorry!

*************

Power Source

The TV set should be operated only from a 220-240 V AC, 50 Hz outlet.

Power Cord

Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause ﬁ re or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualiﬁ ed personnel.

This TV receiver is supplied with a moulded mains plug. The mains plug must not be cut off, as it may contain a special radio interference ﬁ lter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer.

Observe the manufacturers instructions when connecting extension leads to the set. If you are in any doubt about the installation of an extension lead, please consult a competent electrician.

Warning

Do not leave your TV in standby or operating mode when you leave your house.

Disconnecting the Device

The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.

Moisture and Water

Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects ﬁ lled with liquids, such as ﬂ ower vases, on top. Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualiﬁ ed personnel before operating it any further.

Cleaning

Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

English - 3 -

Ventilation

The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

Heat and Flames

The set should not be placed near to open ﬂ ames and sources of intense heat such as an electric heater. Ensure that no open ﬂ ame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, ﬁ re or the like.

Lightning

Before a storm and lightning or when going on holiday, disconnect the power cord and aerial lead from the wall sockets.

Replacement Parts

When replacement parts are required, make sure that the service technician has used replacement parts, which are speciﬁ ed by the manufacturer or have the same speciﬁ cations as the original one. Unauthorized substitutions may result in ﬁ re, electrical shock or other hazards.

Servicing

Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

• Batteries, including those which are heavy metalfree, should not be disposed of with household waste. Please dispose of used battery in an environment friendly manner. Find out about the legal regulations which apply in your area.

• Cold cathode fluorescent lamp in LCD PANEL contains a small amount of mercury; please follow the local laws or regulations for disposal.

Information for Users in European Union Countries

The above mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/ EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than

0.0005% Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead.

Headphone Volume

Excessive sound pressure from earphones and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).

LCD Screen

The LCD panel is a very high technology product with about a million thin ﬁ lm transistors, giving you ﬁ ne picture details. Occasionally, a few non-active pixels may appear on the screen as a ﬁ xed blue, green or red point. Please note that this does not affect the performance of your product.

English - 4 -

Overview of the Remote Control

Standby1.

Cursor up / Page up (in TXT mode)2.

Cursor right / Subpage (in TXT mode)3.

Info / Reveal (in TXT mode)4.

Numeric buttons5.

Return / Exit (in DTV mode) / Index page (in 6. TXT mode)

Programme up / Page down (in DTV mode)7.

Volume up8.

Favourite mode (in DTV mode)9.

AV / Source selection10.

Yellow / Feature menu / Current language (*)(in 11. DTV mode)

Blue / Install menu / Favourite mode (*) (in DTV 12. mode)

Subtitle on-off / TXT subtitle13.

Sleep timer14.

No function15.

Guide (in DTV mode)16.

Update (in TXT mode)17.

Teletext / Mix / Pat18.

Image size / Expand (in TXT mode)19.

Mono-Stereo / Dual I-II / Current language (in 20. DTV mode) (*)

Red / Sound menu / Channel list (in DTV mode)21.

Green / Picture menu / Subtitle on-off (in DTV 22. mode) (*)

Previous Programme / Swap23.

TV – Digital TV mode24.

Programme down / Page up (in DTV mode)25.

Volume down26.

Picture mode selection27.

Menu on-off28.

Cursor down / Page down (in TXT mode)29.

Cursor left 30.

OK / Select / Freeze picture / Hold (in TXT 31. mode)

Mute32.

(*) Only for EU country options.

24 23

21 20 19 18 17

ABC

JKL

STU

PRESETS

SWAP

SCREEN

LANG

SELECT

DEF GHI

MNO

VWX

P+

P-

DTV

FAV

SUBTITLE

EPG

RETURN

INFO /

PQR

SOURCE

SLEEP

2 3

12 13 14

English - 5 -

LCD TV and Operating Buttons

FRONT and REAR VIEW SIDE VIEW Control Buttons

Up button1.

Down button2.

Programme/Volume / AV 3. selection button

Standby button4.

Note:You can use “+/-” buttons to change volume. If you want to change channels, press P/V/AV button once and then use “+/-” buttons. If you hold the P/V/AV button about a few seconds, source OSD will be displayed. Main menu OSD cannot be displayed via control buttons.

Viewing the Connections- Back Connectors

SCART socket inputs or outputs for external devices.1. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

PC Input is for connecting a personal computer to the TV set. 2. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Component Video Inputs (YpBPr) are used for connecting component video. You can use PC input to enable YPbPr signal sonnection with a device that has component output. Connect the YPbPr to PC cable between the PC INPUT on the TV and the component video outputs of your device. (YPbPr cable is not supplied)

HDMI3. : HDMI input HDMI Input is for connecting a device that has an HDMI socket. Your LCD Television is capable of displaying High Deﬁ nition pictures from devices such as a High Deﬁ nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p signals. No sound connection is needed for an HDMI to HDMI connection.

RF Input connects to an antenna or a cable.4. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

HDMI

When you use the wall mount kit (optional) with the LCD TV, we would deﬁ nitely recommend to plug all your cables into the back of the LCD before mounting to the wall.

English - 6 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section.

Video Input is used for connecting video signals of external devices.Connect 2. the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.

Audio Inputs are used for connecting audio signals of external devices. 3. Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device. Also to enable PC/YPbPr sound connection in such a case, use an appropriate audio cable between the connected device’s audio outputs and the TV’s audio inputs Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable (YPbPr cable is not supplied) you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

Headphone jack is used for connecting an external headphone to the system. 4. Connect to the HEADPHONE jack to listen to the TV from headphones.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

HDMI

English - 7 -

Connecting the LCD TV to a PC

For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set.

• Power off both computer and display before making any connections.

• Use 15-pin D-sub display cable to connect a PC to the LCD TV.Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection.

• When the connection is made, switch to PC source. See “Input selection” section.

• Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix

parts.

HDMI

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.

• Most DVD players are connected through COMPONENT SOCKETS. only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable. To enable sound connection, use AUDIO IN located side of the TV (D SUB PC-RCA cable is not supported.(optional)).

. When the connection is made, switch to YPbPr

source. See, “Input selection” section.

• You may also connect through the SCART socket. Use a SCART cable as shown below.

YPbPr can be use

PC audio cable (not supplied)

to AUDIO INPUTS

on the TV

Audio Inputs

PC Input

PC RGB cable (not supplied) to PC input

Note: These methods of connection perform the same function but in different levels of quality. It is not necessary

to connect by all three methods.

English - 8 -

Scart socket

YPbPr to PC

cable (optional)

Component

audio

inputs

DVD Player

HDMI input

Using Side AV Connectors

Scart socket

Decoder

DVD Recorder

Video Recorder

You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied.

• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts.

• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV

Headphone

Camcorder

Connecting Other Equipment via Scart

Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.

For more information, refer to your device’s own instruction book.

Inserting Batteries into the Remote Control Handset

• Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.

• Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover.

Note: Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC 50 Hz. Then the standby LED lights up.

• To switch on the TV from standby mode either:

• Press the “ on the remote control.

• Press the “ the TV. The TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Press the “ ” button on the remote control or press the “

standby mode.

• To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

” button, P+ / P- or a numeric button

” button, -P/CH or P/CH+ button on

” switch on the TV, so the TV will switch to

English - 9 -

Input Selection

Once you have connected external systems to your TV, you can switch to different input sources.

• Press SOURCE button on your remote control for directly changing sources.

• Select “Source” option from the main menu by using “ “ ” button to highlight an input and press “ ” button to select.

Note: You can mark desired source options by pressing the

OK button. Therefore, when

only the marked source options will be available (except for the TV source).

Note : YPbPr mode can be use only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable (YPbPr cable is not supplied).

” or “ ” button. Use then “ ” or

SOURCE button is pressed,

Basic Operations

You can operate your TV using both the remote control and onset buttons.

Operation with the Buttons on the TV

Main menu OSD cannot be displayed via control buttons. “+/-” buttons will function as volume up/down as default. Even if you set other functions for these buttons, “+/-” buttons will perform as default after a short while.

Volume Setting

• Press “P/V/AV” button once and then use “+/-” buttons to increase or decrease volume, so a volume level scale (slider) will be displayed on the screen.

Programme Selection

• Press “+/-” to select the next or previous programme.

AV Mode

• Hold the “P/V/AV” button, source OSD will be displayed.

Operation with the Remote Control

• The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.

English - 10 -

• Functions of the menu system are described in the following sections.

Volume Setting

• Press “V+” button to increase the volume. Press “V-” button to decrease the volume. A volume level scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next Programme)

• Press “P -” button to select the previous programme.

• Press “P +” button to select the next programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10-500 (for IDTV) or 10-199 (for analogue), press the numeric buttons consecutively

• Press directly the programme number to reselect single digit programmes

Initial Settings

When the TV is turned on for the ﬁ rst time, the menu for the language selection appears on the screen. The message “Welcome please select your language!” is displayed in all language options sequentially in the OSD.

By pressing the “ language you want to set and press OK button. After then, “First time installation” OSD will appear on the screen. By pressing “ ” or “ ” buttons, select the country you want to set and press OK button (* for EU countries).

Note: Country selection OSD will not be available for UK.

Press OK button on the remote control to continue and the following message will be displayed on the screen:

• To select the “Yes” or “No” option, highlight the item by using “ ” or “ ” buttons and press the “OK” button.

The IDTV will automatically tune to the UHF or VHF(*) (* for EU countries) transmission channels, searching for digital terrestrial TV broadcasts and displaying the names of channels found. This process will take about a few minutes.

” or “ ” buttons highlight the

+ 23 hidden pages