Hitachi L19DK04U User Manual

19" LCD Colour Television with integral DVD player

L19DK04U

Instructions for use

For any TV set up or usage issues For any TV set up or usage issues

Technical Helpline No. 0845 604 0105Technical Helpline No. 0845 604 0105

Lines are open 9am - 8pm Monday to Saturday and

11am - 5pm Sunday Calls charged at local rate.

Contents

Package Contents .................................................. 2

Features ................................................................. 2

Introduction ............................................................. 2

Preparation ............................................................. 3

Safety Precautions .................................................3

Power Source .....................................................4

Power Cord ......................................................... 4

Warning ..............................................................4

Disconnecting the Device ...................................4

Moisture and Water ............................................4

Cleaning..............................................................4

Heat and Flames ................................................4

Lightning ............................................................. 4

Replacement Parts .............................................4

Servicing ............................................................. 4

Waste Disposal ................................................... 4

Information for Users in European Union

Countries ............................................................ 5

Headphone Volume ............................................ 5

Installation...........................................................5

LCD Screen ........................................................5

Connection to a Television Distribution System

(Cable TV etc.) from Tuner ................................. 5

Overview of the Remote Control ............................6

LCD TV and Operating Buttons .............................. 7

Viewing the Connections- Back Connectors ..........7

Viewing the Connections - Side Connectors ..........8

Power Connection .................................................. 8

Aerial Connection ................................................... 8

Connecting the LCD TV to a PC ............................. 9

Using Side USB Input ............................................. 9

USB Memory Connection ...................................9

Connecting to a DVD Player................................. 10

Using Side AV Connectors ...................................10

Connecting Other Equipment via Scart ................ 10

Inserting Batteries into the Remote Control...........11

Switching the TV On/Off ........................................11

To Switch the TV On ..........................................11

To Switch the TV Off ..........................................11

Input Selection .......................................................11

Basic Operations ...................................................11

Operation with the Buttons of the TV .................11

Operation with the Remote Control ...................11

Initial Settings ....................................................... 12

General Operation ................................................ 12

Electronic Programme Guide (EPG) ....................13

Displaying Subtitles ..........................................13

Digital Teletext (** for UK only) .........................13

Analogue Teletext .............................................13

Widescreen ....................................................... 13

IDTV Menu System ..............................................14

Channel List ...................................................... 14

Timers ...............................................................15

Conditional Access ...........................................16

TV Setup ........................................................... 16

Setup ................................................................ 16

Media Browser .................................................. 20

Playing MP3 Files ............................................. 20

Viewing JPG Files .............................................20

Slideshow Options ............................................ 20

Video Playback ................................................. 21

Analogue TV Menu System .................................. 21

Picture Menu.....................................................21

Sound Menu .....................................................22

Feature Menu ...................................................22

Source Menu ....................................................23

Install Menu ......................................................23

Program Table ..................................................24

PC-VGA Mode Menu System ............................... 25

PC-VGA Position Menu ....................................25

Displaying TV Information .................................... 25

Mute Function ....................................................... 25

Muting Speakers .............................................. 25

Muting the Headphones....................................25

Picture Mode Selection......................................... 25

Zoom Modes......................................................... 26

Auto .................................................................. 26

16:9 ................................................................... 26

4:3 ..................................................................... 26

T eletext ................................................................. 26

Tips .......................................................................27

Image Persistence ............................................ 27

No Power .......................................................... 27

Poor Picture ...................................................... 27

No Picture ......................................................... 27

Sound ............................................................... 27

Remote Control.................................................27

Input Sources....................................................27

Appendix A: PC Input Typical Display Modes .......28

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 29

Appendix C: Supported File Formats for USB

Mode..................................................................... 30

Speciﬁ cations .......................................................31

English - 1 -

Package Contents

INFO

SCREEN

SLEEP

SOURCE

PRESETS

LCD TV

RETURN

Batteries: 2 X AAA

SUBTITLE

LANG.

FAV

EPG

Instruction Book

Remote Control

Quick Guide

Note: You should check the accessories after purchasing. Make sure that each accessory is included.

Features

• Remote controlled colour LCD TV.

• Fully integrated digital TV (DVB-T).

• HDMI connectors for digital video and audio. This connection is also designed to accept high deﬁ nition signals.

• 200 programmes from VHF, UHF(analogue).

• 500 programmes for digital mode (IDTV).

• OSD menu system.

• Scart socket for external devices (such as video, video games, audio set, etc.).

• Stereo sound system.

• 10 page Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• When no valid signal is detected, after 5 minutes the TV switches automatically to standby mode.

English - 2 -

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98,ME,2000,XP, Vista, Windows 7.

• Game Mode

Introduction

Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly.

Please do keep this manual in a safe place for future references.

This device is intended to receive and display TV programs. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder,VCR, PC etc.). This device is only suitable for the operation in dry interiors.

This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modiﬁ cations have been made. T o operate your LCD-TV in extreme ambient conditions may cause the damage of the device.

Please read the corresponding instructions of this handbook prior to the ﬁ rst usage of the device, even when the usage of electronic devices is familiar to you. Notice especially the chapter SAFETY PRECAUTIONS. Carefully keep the handbook as future reference. When selling the device or giving it away, absolutely give these direction for use.

Preparation

For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.

Use this device in moderate climates.

10 cm

Safety Precautions

Please read the following recommended safety precautions carefully for your safety.

SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

************** DO read the operating instructions before you attempt

to use the equipment. DO ensure that all electrical connections (including

the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat.

************** DON’T remove any ﬁ xed cover as this may expose

dangerous voltages. DON’T obstruct the ventilation openings of the

equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DON’T allow electrical equipment to be exposed to dripping or splashing, or objects ﬁ lled with liquids, such as vases, to be placed on the equipment.

DON’T place hot objects or naked ﬂ ame sources such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to ﬁ res.

DON’T use makeshift stands and NEVER ﬁ x legs with wood screws - to ensure

complete safety always fit the manufacturer’s approved stand or legs with the ﬁ xings

provided according to the instructions. DON’T use equipment such as personal stereos or

radios so that you are distracted from the requirements of trafﬁ c safety. It is illegal to watch

television whilst driving. DON’T listen to headphones at high volume, as such

use can permanently damage your hearing. DON’T leave equipment switched on when it is

unattended unless it is speciﬁ cally stated that it is designed for unattended operation or has a

stand-by mode. Switch off using the switch on the equipment and make sure that your

family know how to do this. Special arrangements may need to be made for inﬁ rm or

handicapped people. DON’T continue to operate the equipment if you are

in any doubt about it working normally, or if it is damaged in any way - switch off,

withdraw the mains plug and consult your dealer.

ABOVE ALL

--- NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock;

--- NEVER guess or take chances with electrical equipment of any kind

--- it is better to be safe than sorry!

*************

English - 3 -

Power Source

The TV set should be operated only from a 220-240 V AC, 50 Hz outlet.

Power Cord

Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause ﬁ re or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualiﬁ ed personnel.

This TV receiver is supplied with a moulded mains plug. The mains plug must not be cut off, as it may contain a special radio interference ﬁ lter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer.

Observe the manufacturers instructions when connecting extension leads to the set. Check the fuse rating on the new plug; this should be ﬁ tted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1362) approvals, these are easily identiﬁ able by

either the about the installation of an extension lead, please consult a competent electrician.

ASA

or symbols. If you are in any doubt

Warning

Do not leave your TV in standby or operating mode when you leave your house.

Disconnecting the Device

The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.

Moisture and Water

Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects ﬁ lled with liquids, such as ﬂ ower vases, on top. Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualiﬁ ed personnel before operating it any further.

Cleaning

Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. T o prevent overheating, these openings must not be blocked or covered in anyway.

Heat and Flames

The set should not be placed near to open ﬂ ames and sources of intense heat such as an electric heater. Ensure that no open ﬂ ame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, ﬁ re or the like.

Lightning

Before a storm and lightning or when going on holiday, disconnect the power cord and aerial lead from the wall sockets.

Replacement Parts

When replacement parts are required, make sure that the service technician has used replacement parts, which are speciﬁ ed by the manufacturer or have the same speciﬁ cations as the original one. Unauthorized substitutions may result in ﬁ re, electrical shock or other hazards.

Servicing

Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

• Batteries, including those which are heavy metalfree, should not be disposed of with household waste. Please dispose of used battery in an environment friendly manner. Find out about the legal regulations which apply in your area.

• Cold cathode fluorescent lamp in LCD PANEL contains a small amount of mercury; please follow the local laws or regulations for disposal.

English - 4 -

Information for Users in European Union Countries

The above mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/ EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than

0.0005% Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead.

Headphone Volume

Excessive sound pressure from earphones and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).

LCD Screen

The LCD panel is a very high technology product with about a million thin ﬁ lm transistors, giving you ﬁ ne picture details. Occasionally, a few non-active pixels may appear on the screen as a ﬁ xed blue, green or red point. Please note that this does not affect the

performance of your product.

Connection to a Television Distribution System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a ﬁ re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)

The Standby / On button doesn´t separate this

device completely from mains. Moreover the device consumes power in the standby operation. In order to separate the device completely from mains, the mains plug has to be pulled from the mains socket. Because of that the device should be set up in a way, that an unobstructed access to mains socket is guaranteed,

so that in case of emergency the mains plug can be pulled immediately. T o exclude the danger of ﬁ re, the

power cord should principally be separated from the mains socket prior to a longer period of non-usage, i.e. during vacations.

Electrical device not in the hands of children

Never let children use electrical device unsupervised.

Children can´t always recognize properly the possible dangers.

Batteries / accumulators can be life threatening when swallowed. Store batteries unreachable for small children. In case of swallowing a battery medical aid has to be sought immediately. Also keep the packaging foils away from children. There is danger of suffocation.

English - 5 -

Overview of the Remote Control

Standby / On1. Image size / Expand (in TXT mode)2. Sleep timer3. Numeric buttons4. Return / Exit (in DTV mode) / Index page (in 5.

TXT mode) Cursor up / TXT up page6. Cursor left 7. Programme up / Page down (in DTV mode)8. Programme down / Page up (in DTV mode)9. Mono-Stereo / Dual I-II / Current Language(in 10.

DTV mode) Swap11. Electronic programme guide (in DTV mode)12. Info / TXT reveal (in TXT mode)13. Picture mode selection14. Source selection15. Red / Sound Menu / Channel List (in DTV 16.

mode)(*) Green / Picture Menu / Subtitle On-off (in DTV 17.

mode) (*) Yellow / Feature / Current language (in DTV 18.

mode) (*) Menu On-off19. Blue / Install / Favourite mode (in DTV mode) (*)20. OK / Select (analogue TV mode) / Hold (in TXT 21.

mode) / Channel List (DTV mode) Cursor right / Subpage (in TXT mode)22. Cursor down / TXT Downpage23. Volume up24. Volume down 25. Mute26. Teletext / Mix 27. Subtitle (in DTV mode) / TXT Subtitle (analague 28.

TV mode) FAV (*) (Favourite Selection)(in DTV mode)29. Media Player buttons30.

RETURN

FAV

LANG.

EPG

INFO

SOURCESLEEP SCREEN

SUBTITLE

PRESETS

(*) Only available for EU country options. Note: Buttons that are not indicated with a number on the remote control illustration are not functional in TV mode. Remote range is approximately 7m/23ft

English - 6 -

LCD TV and Operating Buttons

FRONT and REAR VIEW SIDE VIEW Control Buttons

Up button1. Down button2. Programme/Volume / AV 3.

selection button Standby / On button4.

Note:You can use “+/-” buttons to change volume. If you want to change channels, press P/V/AV button once and then use “+/-” buttons. If you hold the P/V/AV button about a few seconds, source OSD will be displayed. Main menu OSD cannot be displayed via control buttons.

Viewing the Connections- Back Connectors

SCART socket inputs or outputs for external devices.1. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

PC Input is for connecting a personal computer to the TV set. 2. Connect the PC cable between the PC-VGA INPUT on the TV and

SPDIF

Coax.OUT

the PC output on your PC. Component Video Inputs (YPbPr) are used for connecting component video. You can use PC-VGA input to enable YPbPr signal connection with a device that has component output. Connect the YPbPr to PC cable between the PC INPUT on the TV and the component video outputs of your device.

S/PDIF Coaxial Out3. outputs digital audio signals of the currently watched source. Dolby D Audio is bypassed while in media browser mode only.

RF Input connects to an antenna or a cable system.4. Note that if you use a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

5. HDMI 1: HDMI 1 input HDMI Input is for connecting a device that has an HDMI socket. Your LCD Television is capable of displaying High Deﬁ nition pictures from devices such as a High Deﬁ nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p signals. No sound connection is needed for an HDMI to HDMI connection

HDMI 1

VGA

SCART

When you use the wall mount kit (optional) with the LCD TV, we would deﬁ nitely recommend to plug all your cables into the back of the LCD before mounting to the wall.

English - 7 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view 1. all the channels that you subscribe to. For more information, see “Conditional Access” section

USB Input (functional in DTV mode only2. Video Input is used for connecting video signals of external devices.3.

Connect the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.

Audio Inputs are used for connecting audio signals of external devices. 4. Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device. Also to enable PC/YPbPr sound connection in such a case, use an appropriate audio cable between the connected device’s audio outputs and the TV’s audio inputs

Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

Headphone jack is used for connecting an external headphone to the 5. system. Connect to the HEADPHONE jack to use headphones.

Power Connection

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

SPDIF

Coax.OUT

VGA

SCART

HDMI 1

English - 8 -

Connecting the LCD TV to a PC

For displaying your computer ’s screen image on your LCD TV, you can connect your computer to the TV set.

• Power off both computer and display before making

any connections.

• Use 15-pin D-sub display cable to connect a PC

to the LCD TV. Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection.

• When the connection is made, switch to PC-VGA

source. See “Input selection” section.

• Set the resolution that suits your viewing requirements.

Resolution information can be found in the appendix parts.

HDMI 1

VGA

SPDIF

Coax.OUT

SCART

Audio Inputs

PC Input

Using Side USB Input

• You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/play music,photo or video ﬁ les stored in a USB stick.

• It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV.

• You may back up your ﬁ les before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any ﬁ le damage or data loss.

• The TV supports only FAT32 disk formatting. NTFS format is not supported. If you connect a USB disk with NTFS format, “usb is unformetted” osd will be displayed.

• Do not pull out USB module while playing a ﬁ le.

CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself .

USB Memory Connection

• Plug your USB device to the USB input of the TV.

Note: USB hard disk drives are not supported.

PC audio cable

(not supplied)

to AUDIO INPUTS

on the TV

PC RGB cable (not supplied) to PC input

5Vdc-Max:500mA

English - 9 -

Connecting to a DVD Player

SCART socket

Decoder

DVD Recorder

Video Recorder

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.

• Most DVD players are connected through COMPONENT SOCKETS. YPbPr can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable. T o enable sound connection, use AUDIO IN located side of the TV (YPbPr cable is not supplied).

• When the connection is made, switch to YPbPr source. See, “Input selection” section.

• You may also connect through the SCART socket. Use a SCART cable as shown below.

Using Side AV Connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied.

• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts.

• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV

Headphone

Camcorder

Connecting Other Equipment via Scart

Most devices support SCART connection. You can connect a; DVD recorder or a VCR to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.

For more information, refer to your device’s own instruction book.

Scart socket

Note : These methods of connection perform the same function but in different levels of quality. It is not necessary

to connect by all three methods.

YPbPr to PC

cable (optional)

Component

audio inputs

DVD Player

HDMI input

English - 10 -

Inserting Batteries into the Remote Control

• Remove the battery cover located on the back of the remote control by gently pulling backwards from the indicated part.

• Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when

inserting batteries and replace the battery cover.

Note : Remove the battery from remote control when it is not to be used for a long period. Otherwise it can be damaged

due to any leakage of batteries.

Input Selection

Once you have connected external systems to your TV, you can switch to different input sources.

• Press SOURCE button on your remote control for directly changing sources.

• Select “Source” option from the main menu by using “ “ ” button to highlight an input and press “ ” button to select.

Note : With the “ ” or “ ” buttons you can set Off or On. When Off is selected; this source does not appear in the OSD when you press the AV / Source button of the remote control. (except for the TV source).

” or “ ” button. Use then “ ” or

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC 50 Hz.

• Then the standby LED lights up.

• To switch on the TV from standby mode either:

• Press the “ on the remote control.

• Press the -P/CH or P/CH+ button on the TV. The TV will then switch on.

Note : If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Press the “ ” button on the remote control or press the STANDBY switch, so the TV will switch to standby mode.

• To power power cord from the mains socket.

Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

” button, P+ / P- or a numeric button

down the TV completely, unplug the

Note : YPbPr mode can be used only when you connect a device that has a YPbPr output through the PC-VGA input with YPbPr to PC cable (YPbPr cable is not supplied).

Basic Operations

You can operate your TV using both the remote control and onset buttons.

Operation with the Buttons of the TV

Main menu OSD cannot be displayed via control buttons. “+/-” buttons will function as volume up/down as default. Even if you set other functions for these buttons, “+/-” buttons will perform as default after a short while.

Volume Setting

• Press “+/-” buttons to increase or decrease volume, so a volume level scale (slider) will be displayed on the screen.

Programme Selection

• Press P/V/AV button once and then use “+/-” buttons to select the next or previous programme.

AV Mode

• Hold the “P/V/AV ” button, source OSD will be displayed.Use “+/-” buttons to select the desired source.

Operation with the Remote Control

• The remote control of your TV is designed to control all the functions of the model you selected. The

English - 11 -

functions will be described in accordance with the menu system of your TV.

• Functions of the menu system are described in the following sections.

Volume Setting

• Press “V+” button to increase the volume. Press “V-” button to decrease the volume. A volume level scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next Programme)

• Press “ P - ” button to select the previous programme.

• Press “ P + ” button to select the next programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10-500 (for IDTV) or 10-199 (for analogue), press the numeric buttons consecutively

• Press directly the programme number to reselect single digit programmes

Initial Settings

When the TV is turned on for the ﬁ rst time, the menu for the language selection appears on the screen. The message “Welcome please select your language!” is displayed in all language options sequentially in the OSD.

By pressing the “ language you want to set and press OK button. Afterwards, “First time installation” OSD will appear on the screen. By pressing “ ” or “ ” buttons, select the country you want to set and press OK button (* for EU countries).

Note: Country selection OSD will not be available for UK.

Press OK button on the remote control to continue and the following message will be displayed on the screen:

• To select the “Yes” or “No” option, highlight the item by using “ ” or “ ” buttons and press the “OK” button.

The IDTV will automatically tune to the UHF or VHF(*) (* for EU countries) transmission channels, searching for digital terrestrial TV broadcasts and displaying

” or “ ” buttons highlight the

English - 12 -

the names of channels found. This process will take about a few minutes.

After Automatic Search is completed, the following message asking for analogue channel search appears on the screen:

To search for analogue channels, select “Yes”. TV switches to the analogue TV mode. The menu is displayed to search for analogue channels.

Select your Country, Language and Text language by using “

OK or RED button to continue. To cancel, press the BLUE button.

For more information on this process, see “Install Menu” section.

Note : For proper functioning of digital teletext in DTV mode, you should set country as UK in analogue AUTO PROGRAM (for UK broadcasts only).

Do not turn off the TV while initializing ﬁ rst time installation.

” or “ ” and “ ” or “ ” buttons. Press

General Operation

Press the “SOURCE” button on the remote control and select DTV to switch the TV set to digital terrestrial television broadcasting.

Information Banner

• Whenever you change channel, using the P- / P+ button or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode). This will remain on the screen for a few seconds.

• The information banner can also be displayed at any time while watching TV by pressing the “INFO” button on the remote control:

If the selected channel is locked, you must enter the correct four numeric code to view the channel. “Enter PIN” will be displayed on the screen in such a case:

Electronic Programme Guide (EPG)

• Some, but not all, channels send information about the current and next events. Press EPG button to view the EPG menu. EPG appears on the screen. It is able to get Information of the channel - programs weekly by means of 7-DAY-EPG. All programs of channels are displayed. On the bottom of the screen; info bar, showing all the available commands, will be displayed.

RED button (Shrink) : makes the info boxes smaller.

GREEN button (Expand) : makes the info boxes larger.

YELLOW button (Prev. Day) : displays the programmes of previous day.

BLUE button (Next day) : displays the programmes of the next day.

INFO (Details): displays the programmes in detail. Numeric buttons (Jump) : go to preferred channel

directly via numeric buttons. OK : view for current broadcast/reminders for future

programs.

: jumps to the current broadcast.

• Press “0” button on the remote control to view Guide Search menu. Using this feature, you can search the programme guide database in accordance with the genre selected or with name match.

Displaying Subtitles

With digital terrestrial broadcasting (DVB-T), some programmes are being broadcasted with subtitles.

Press the “ MENU ” button to display the main menu, highlight the Setup and then Language menu using “

” or “ ” button and press the OK button to display the

“Language settings” menu. Highlight the “Subtitle” item in “Language settings”

menu and use desired language.

” or “ button to set Subtitle to the

English - 13 -

Note: You can enable subtitles by pressing the SUBTITLE button of the remote control. Press SUBTITLE button again to disable subtitle function.

If “Subtitle” is on and a language option is set, pressing the “ ” button causes the following warning message display on the screen (** for UK only):

Digital T eletext (** for UK only)

• Press the “ ” button.

• The digital teletext information appears.

• Operate it with the coloured buttons, cursor buttons and OK button.

The operation method may differ depending on the contents of the digital teletext.

Follow the instructions displayed on digital teletext screen.

• When Press “SELECT” button or similar message appears on the screen, press the OK button.

• When the “ television broadcasting.

• With digital terrestrial broadcasting (DVB-T), in addition to digital teletext broadcasting together with the normal broadcasting, there are also channels with just digital teletext broadcasting.

• The aspect ratio (picture shape) when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously.

• When you press the “ teletext screen will be displayed.

” button is pressed, the TV returns to

” button again, the digital

Analogue T eletext

Use of teletext and its functions are identical to the analogue text system. Please do refer to the “TELETEXT” explanations.

Widescreen

Depending on the type of the broadcast being transmitted, programmes can be viewed in a number of formats. Press the “SCREEN” button repeatedly to change screen format.

When Auto is selected, the format being displayed is determined by the picture being broadcasted.

PLEASE NOTE : Menu size changes depending on the chosen image size.

Notice !

Dolby D audio type is not supported. In this case, Tv sound will be muted. If the broadcast includes AC3 stream, the following warning message will be displayed on the screen:

If there is no audio available, the following warning message will be displayed on the screen:.

IDTV Menu System

Press the “ M ENU” button. Main menu will be displayed.

Channel List

Using the “ ” or “ ” button on the remote control, make sure that the ﬁ rst item, Channel List, is highlighted and press the “OK” button to display the Channel List or you can press the OK button during watching DVB-T broadcasting and get to the Channel List directly.

Moving the channels in the channel list

• Press “ ” or “ ” buttons to select the channel that will be moved.

• Press “

Following OSD will be displayed next to “ OK ” item to indicate that enter a number by using the numeric buttons on the remote control and press “ OK ” to conﬁ rm.

” or “ ” buttons to select the “ Move ” item on

Channel List menu.

Note: If you enter the same programme number of the channel

that you want to move, “.... channel services will be replaced.

Do you want to continue?” OSD will be displayed. Press OK to conﬁ rm or select “No” to cancel.

Deleting the Channels in the Channel List

• Press “ ” or “ ” button to select the channel that will be deleted.

• Press “ on Channel List menu.

• Press the “ OK ” button to delete the highlighted channel in the channel list. Then the message below appears on the screen:

” or “ ” button to select the “Delete’’ item

Navigating the Entire Channel List

Press “ ” or “ ” button for selecting the previous or next channel. You can press “RED” or “GREEN” button to move page up or page down.

T o watch a speciﬁ c channel, highlight it using “ ” button and then press “ OK ” button, while the “Select” item on Channel List menu is highlighted by using “ ” or “ ” button.

Then the name and number of the selected channel will be displayed in the top-left and top-right of the channel display at the top-right of the screen, respectively.

” or “

English - 14 -

• Press “ ” or “ ” button to highlight the desired option. If “ OK ” button is pressed while “ Yes ” is highlighted, the highlighted channel is deleted. Selecting “ No ” cancels the deletion.

Renaming Channels

To rename a speciﬁ c channel, the channel must be highlighted by pressing “ ” or “ ” button. Then highlight the Edit Name item by pressing “ ” or “ ” button as illustrated below. Press the “OK” button to activate the rename feature.

+ 33 hidden pages