Hitachi HUC106060CSS600, HUC106045CSS600, HUC106030CSS600 DATASHEET

Ultrastar™ C10K600
2.5-INCH ENTERPRISE HARD DISK DRIVES
Industry-leading power and performance for the Enterprise
Highlights
Industry-best performance in a 10K RPM >
2.5-inch form factor 18% faster sequential and up to 15% better > random performance than competition Uses 22% less power during operation > than competition
1
600GB >
capacity enables 3.5- to 2.5-inch form factor transition High-performance 6Gb/s SAS for reliable > data throughput Halogen-reduced design and industry-best > power utilization for most eco-friendly 10K SFF hard drive
Applications/Environments
Enterprise-class servers > Networked storage arrays > Space and/or power constrained environments > Databases and Online Transaction > Processing (OLTP) Blade and 1U/2U rack-mounted servers > Cloud computing >
Features and Benefits
Feature / Function Benets
Return on Advanced power management Cool enterprise SAS with lower power requirements
Investment
600GB, 450GB and 300GB More capacity for less space and
configuration flexibility
Performance SAS 6Gb/s dual port Fastest interface for enhanced reliability
10,000 RPM Low latency for faster access to data
64MB cache buffer Manages data efficiently
Rotational Vibration Safeguard (RVS) Maintains drive performance in high rotational
vibration environments and multi-drive systems
Workload detector technology Maximizes performance in RAID environments
Reliability Iterative decode Improves signal processing
End-to-end data protection (ANSI) Enhances error detection for optimal data integrity
without capacity loss
Head load/unload ramp Minimizes handling damage during integration
Leadership performance
Ultrastar™ C10K600 is a 2.5-inch 10,000 RPM hard drive that leads the industry with 18% faster sequential and up to 15% random performance than the nearest competitor. The high­performance SAS 6Gb/s interface delivers data reliability, availability and scalability and is the only small form factor SAS drive in the industry to pack a 64MB cache buffer to optimize the read/write response time.
600, 450 and 300GB | 10,000 RPM
2.5-inch SFF | SAS 6Gb/s
Best-in-class power performance
Driving the small form factor transition
Ultrastar C10K600 delivers capacity parity with 3.5-inch 10K drives, providing a massive 600GB of storage space and enabling lower total cost of ownership for many Enterprise environments, especially networked storage arrays. When faced with space and power limitations, the Ultrastar C10K600 is an efficient solution for online transaction processing, intensive data analysis and multi-user applications. Some models of the C10K600 also offer Bulk Data Encryption for hard-drive-level data security. These self-encrypting models are designed to the Trusted Computing Group’s Enterprise A Security Subsystem Class encryption specification and allow customers to reduce costs associated with drive retirement and extend drive life by enabling swift and secure repurposing of drives.
www.hitachiGST.com
Ultrastar C10K600
Specifications
Model(s)
Interface
Capacity (GB)
Recording zones
Data heads (physical)
Data Disks
Max. areal density (Gbits/sq. in.)
Performance
Data buffer (MB)
Rotational speed (RPM)
Latency average (ms)
Media transfer rate (Mbits/sec, max)
Interface transfer rate (MB/sec, max)
Sustained transfer rate (MB/sec, typ.)
Seek time (read, ms, typical)
Reliability
Error rate (non-recoverable, bits read)
MTBF4 (M hours)
Availability (hrs/day x days/wk)
Acoustics
Idle (Bels)
Power
Requirement
Operating, (W, typical)
Unload idle (W)
Power consumption efficiency at idle (W/GB)
Physical size
z-height (mm)
Dimensions (width x depth, mm)
Weight (g, max)
Environmental (operating)
Ambient temperature
Shock (half-sine wave)
Vibration (G, 5 to 500 Hz)
Environmental (non-operating)
Ambient temperature
Shock (half-sine wave)
Vibration (G, 5 to 500 Hz)
1
One GB is equal to one billion bytes when referring to hard drive capacity. Accessible capacity will vary depending on the operating environment and formatting.
2
Portion of buffer capacity used for drive firmware
3
Excludes command overhead
4
MTBF target is based on a sample population and is estimated by statistical measurements and acceleration algorithms under median operating
conditions. MTBF ratings are not intended to predict an individual drive’s reliability. MTBF does not constitute a warranty.
Ultrastar and Partners First are trademarks of Hitachi Global Storage Technologies. Hitachi and Hitachi Inspire the Next logo are trademarks of Hitachi, Ltd in the U.S., Japan and/or other countries. Other trademarks are the property of their respective companies.
Hitachi Global Storage Technologies trademarks are intended and authorized for use only in countries and jurisdictions in which Hitachi Global Storage Technologies has obtained the rights to use, market and advertise the brand. Contact Hitachi Global Storage Technologies for additional information. Hitachi Global Storage Technologies shall not be liable to third parties for unauthorized use of this document or unauthorized use of its trademarks.
References in this publication to Hitachi Global Storage Technologies’ products, programs, or services do not imply that Hitachi Global Storage Technologies intends to make these available in all countries in which it operates.
Product specifications provided are sample specifications and do not constitute a warranty. Information is true as of the date of publication and is subject to change. Actual specifications for unique part numbers may vary. Please visit the Support section of our website, www.hitachigst.com/support, for additional information on product specifications. Photographs may show design models.
1
2
3
HUC106060CSS600 HUC106060CSS601 HUC106045CSS600 HUC106045CSS601 HUC106030CSS600 HUC106030CSS601
SAS 6Gb/s
600 / 450 / 300
39
6 / 6 / 3
3 / 3 / 2
341
64
10K
3.0
1893
600
176 - 109
3.7
16
1 in 10
2
24x7
2.9
+5 VDC (+/-5%), +12 VDC (+/-5%)
5.6
3.1
0.0064 / 0.0085 / 0.0114
14.8
70 x 100.6
204
5o to 55o C
60 G (2ms)
1.5, all axes
-40o to 70o C
>300 G (2ms)
3, all axes
Hitachi quality and service
Hitachi’s Ultrastar C10K600 extends the company’s long-standing tradition of performance and reliability leadership. A balanced combination of new and proven technologies enables high reliability and availability to customer data.
Hitachi drives are backed by an array of technical support and services, which may include customer and integration assistance. Hitachi is dedicated to providing a breadth of hard disk drive solutions to satisfy all of today’s demanding computing needs.
How to read the Ultrastar model number
HUC106060CSS600 = 600GB, SAS 6Gb/s H = Hitachi U = Ultrastar C = Compact (vs S for Standard) 10 = 10,000 RPM 60 = Full capacity — 600GB 60 = Capacity this model, 60 = 600GB (45 = 450GB, 30 = 300GB) C = Generation code S = 14.8mm z-height S6 = Interface, SAS 6Gb/s 0 = Reserved 0 = No encryption (1 = TCG encryption)
Information and Technical Support
www.hitachigst.com (Main Web site) www.hitachigst.com/partners (Partner Web site)
North America
support_usa@hitachigst.com Toll free: 1 888 426-5214, Direct: 1 507 322-2370
Asia Pacic
support_ap@hitachigst.com / 65 6840 9595
EMEA and UK
support_uk@hitachigst.com / 44 20 7133 0032
Germany
support_uk@hitachigst.com / 49 6929 993601
Program Support Partners First™ Program channelpartners@hitachigst.com
© 2010 Hitachi Global Storage Technologies
Hitachi Global Storage Technologies 3403 Yerba Buena Road San Jose, CA 95135 USA
Produced in the United States 10/10. All rights reserved.
The EcoTrac symbol identifies Hitachi hard drives that deliver on the principles of lower operating costs, smaller carbon footprint, safer product disposal and creation of a more sustainable environment.
DSUC106010EN-01
Loading...