Hitachi HIT15WDVB, HIT19WDVB User Manual
Instruction Manual
15.4”/19” Widescreen LCD TV With Intergrated Digital Tuner
HIT15WDVB
HIT19WDVB
GB
Safety Warnings
SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but,
like any electrical equipment, care must be taken if you are to obtain the best results and safety
is to be assured.
-------------------------------------------------------------------------------------------------------------------------------
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter-
connections between the pieces of equipment) are properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw the mains plug before making or changing
connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment.
-------------------------------------------------------------------------------------------------------------------------------
PreparationInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
Introducing the LCD TV
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with
liquids, such as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or
close to equipment. High temperatures can melt plastic and lead to fires.
DON’T use equipment such as personal stereos or radios so that you are distracted from the
requirements of traffic safety.
DON’T listen to headphones at high volume, as such use can permanently damage your
hearing.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is
designed for unattended operation. Switch off using the switch on the equipment and make sure
that your family knows how to do this. Special arrangements may need to be made for infirm or
handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if
it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.
ABOVE ALL
NEVER let anyone especially children push anything into holes, slots or any other opening in the
case - this could result in a fatal electric shock
NEVER guess or take chances with electrical equipment of any kind…it is better to be safe than
sorry!
Using The DTV Features
Note: This product is exclusively available through Dixons Stores Group. In the unlikely event of
a problem with your product please return to the store where your purchase was made.
1
Preparation
Safety Warnings
Introducing the LCD TV
Installing the LCD TV
Using The Features
Using The DTV Features
Troubleshooting
Power Source
The TV set should be operated only from a
220-240 V AC, 50Hz outlet. Ensure that you
select the correct voltage setting for your
convenience.
Power Cord
Do not place the set, a piece of furniture, etc.
on the power cord (mains lead) or pinch the
cord. Handle the power cord by the plug. Do
not unplug the appliance by pulling from the
power cord and never touch the power cord
with wet hands as this could cause a shout
circuit or electric shock. Never make a knot in
the cord or tie it with other cords. The power
cords should be placed in such a way that they
are not likely to be stepped on. A damaged
power cord can cause fire or give you an
electric shock. When it is damaged and needs
to be replaced, it should be done by qualified
personnel.
Moisture and Water
Do not use this device in a humid and damp
place (avoid the bathroom, the sink in the
kitchen, and near the washing machine). Do
not expose this device to rain or water, as this
may be dangerous and do not place objects
filled with liquids, such as flower vases, on top.
Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualified
personnel before operating it any further.
Cleaning
Before cleaning, unplug the TV set from the wall
outlet. Do not use liquid or aerosol cleaners.
Use soft and dry cloth.
an electric heater. Ensure that no open flame
sources, such as lighted candles, are placed
on top of the TV. Batteries should not be
exposed to excessive heat such as sunshine,
fire or the like.
Lightning
In case of storm and lightning or when going
on holiday, disconnect the power cord from the
wall outlet.
Replacement Parts
When replacement parts are required, make
sure that the service technician has used
replacement parts, which are specified by the
manufacturer or have the same specifications
as the original one. Unauthorized substitutions
may result in fire, electrical shock or other
hazards.
Servicing
Please refer all servicing to qualified personnel.
Do not remove the cover yourself as this may
result in an electric shock.
Waste Disposal
Instructions for waste disposal:
z
Packaging and packaging aids are recyclable
and should principally be recycled. Packaging
materials, such as foil bags, must be kept away
from children.
z
Batteries, including those, which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
battery in an environment friendly manner.
Find out about the legal regulations, which
apply in your area.
Ventilation
The slots and openings on the TV set are
intended for ventilation and to ensure reliable
operation. To prevent overheating, these
openings must not be blocked or covered in
anyway.
Specifications
Heat and Flames
The set should not be placed near to open
flames and sources of intense heat such as
2
z
The cold cathode fluorescent lamp in LCD
PANEL cotains a small amount of mercury;
please follow the local laws or regulations for
disposal.
Disconnecting the Device
The mains plug is used to disconnect TV set
from the mains and therefore it must remain
readily operable.
Contents
Preparation .................................................................................................................................1
Safety Instructions ........................................................................................................................ 1
Chapter 1 Introducing The LCD TV ..................................................................................... 3
Package Contents ..................................................................................................................... 3
Setting Your LCD TV .................................................................................................................. 4
Your LCD TV ............................................................................................................................... 5
Remote Control...............................................................................................................................8
Chapter 2 Installing The LCD TV ...................................................................................... 10
Connecting a TV Cable or an Anterial ...................................................................................... 10
Connecting a DVD Player .................................................................................................... 14
Connecting a VCR & Video Camera ........................................................................................... 15
Connecting a TV Cable Box or Satellite Receiver ................................................................... 16
Connecting an Audio Receiver ............................................................................................ 17
HDMI ......................................................................................................................................... 18
PreparationInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
Introducing the LCD TV
Chapter 3 Using The Features .............................................................................................19
Basic Operation ......................................................................................................................... 19
OSD Menu Operation ................................................................................................................ 20
The Video Settings ..................................................................................................................... 21
The Audio Settings ..................................................................................................................... 21
The Setup Settings .................................................................................................................... 22
The Preferences Settings .......................................................................................................... 23
The Screen Settings .................................................................................................................. 23
Chapter 4 Using The DTV Features ............................................................................... 24
Troubleshooting .................................................................................................................... 34
Specifications .................................................................................................................. 35
Using The DTV Features
3
Preparation
Chapter 1 Introducing The LCD TV
Introducing the LCD TV
PACKAGE CONTENTS
; LCD TV
Installing the LCD TV
;Remote Control/
Using The Features Troubleshooting Specifications
Once you open the box, make sure all of the following contents are included. If you’re missing any
items, please contact your dealer.
;Bottom Stand
VIDEO Cable
AAA Batteries x 2
-
-
+
+
RCT-1522
( P.N.:845-045-LM9XB-THITH )
;
( P.N.:621-151-2000H ) ( P.N.:621-151-60002H )
; AUDIO Cable
Using The DTV Features
;Power Cord
;SCART Adapter
(P.N.: 412-SCA-0001H)
(For special and high quality SCART cable (with a bigger
(P.N.:600-151-5000-LJH)
;User’s Manual
( P.N.:002-U03-HITA-BH )
adapter head), please use the supplied SCART Adapter to
fit snugly into the SCART socket at the rare panel. )
; Quick Start Guide
Quick
Start
Guide
PLEASENOTE:
Byusing a SCART lead (not supplied) you can improve
thequality of playback and sound. Remember you must
stillhave the aerial lead (not supplied) connected. If you
areusing a SCART lead you should not have to tune
yourTV to your video, instead select the SCART channel
bypressing the TV/SCART button on the remote control.
Insert batteries into
Remote Control
1
Use 2 x AAA size batteries.
Connect aerial
2
Donot connect the TV to the mains supply until
youhave completed all the connections.
zIfyou just want
Connect one end of the aerial lead to the aerial
toconnect your
socket on the wall and the other end of the lead to
TVto an aerial
the appropriate socket on the back of your TV.
connect it as shown
Now go to stage 4.
opposite.
zIfyou want to
connectyour TV
toa VCR
go to stage 3a.
zIfyou want to
connectyour TV
toa VCR and
aSatellite/Cable
box then
go to stage 3b.
Connecting to a VCR
3a
HIT15WDVB
HIT19WDVB
GB
Other connections
4
A
B
C
VHF/UHF IN
AC IN 100-240V
AC POWER
50/60Hz
SWITCH
PCAUDIO IN
Donot connect the TV to the mains supply until you have completed all the connections.
A
If you have a SCART lead, connect one
end of the lead to the SCART socket on
your VCR and connect the other end to
theSCART socket marked SCART on the
back of your TV.
B
Connect one end of the RF
AC IN 100-240V
AC POWER
50/60Hz
SWITCH
lead to the aerial socket on
your TV and the other end to
the socket marked RFOUT
on the back of your VCR.
C
Connect your aerial lead
to the socket marked RF
IN on the back of your
C
VCR.
Nowgo to stage 4.
Switch on
VHF/UHF IN
VHF/UHF IN
AC IN 100-240V
AC POWER
AC IN 100-240V
AC POWER
50/60Hz
SWITCH
50/60Hz
SWITCH
PCAUDIO IN
PCAUDIO IN
Plug your TV and any other equipment that you have connected into the mains.
Press the ACSWITCH on the back of your TV to switch on your TV's power.
Then press the
screen.
Note:
z
z
INPUT
button on the right side view of your TV to switch on your TV. The screen will be blue
It is recommended to complete the VCR channel set up before the TV tuning process.
Connect your VCR to the TV and the antenna, then switch it on. Insert a pre-recorded tape and press
PLAY. This can help you to easily find the VCR channel as it will play the pre-recorded tape.
Before you start up the TV tuning process, the Satellite/Cable channel set up are recommended to
complete prior to the TV tuning process.
Connect your Satellite/Cablebox to the TV and the antenna, and then switch it on. Select a channel
that you will easily recognise. This can help you to easily find the satellite/cable channel since the TV will
play that selected channel.
VHF/UHF IN
PCAUDIO IN
B
( P.N.:002-S06-HITA-AH )
OR
A
Connecting to a VCR and
a Satellite/Cable box
3b
VHF/UHF IN
AC IN 100-240V
AC POWER
50/60Hz
SWITCH
PCAUDIO IN
A
VCR
B
Satellite/Cable
Box
C
Select & Start the APS menu
5
Country UK
Start APS
Is aerial plugged in
Press OK to start APS
Press MENU to exit APS
Turn on the TV. The main menu will appear automatically (as shown above).
A
Press źŸto select Country, then press OK to enter menu option.
B
Press ŻŹto select country as you wish, press OK to exit the current menu.
C
Press źŸto select the StartAPS, then press OK to start the channel tuning. Your TV
D
will now automatically start to tune in all available channels, including your VCR and
Satellite / Cable channel if you connected a VCR or Satellite / Cable box. Pleasebe
patient,the tuning process may take a few minutes.
Note: Press OK to exit when the tuning process is finished.
A
Connect one end of an RF lead to the aerial
socket marked on your TV and the other end
to the socket marked RFOUT on the back of
your VCR.
B
Connect one end of another RF lead to the
aerial socket marked RFIN on your VCR and
the other end to the socket marked RFOUT on
the back of your Satellite/Cable box.
C
Connect your aerial lead to the socket marked
D
RFIN on the back of your Satellite/Cable box.
D
If you have SCART leads connect one end to
the socket marked SCART on the back of your
TV, and connect the other end to the SCART
socket on the back of your VCR.
Nowgo to stage 4.
Region Confirm
OK: Start Searching
These items are all you need to set up and operate the LCD TV in its basic configuration.
Make sure all of the following contents are included. If there are any missing item, please return this
product to the original place of purchase.
4
Setting Your LCD TV
How to install the TV Stand
If you prefer to mount your new TV on a wall instead of attaching it to the stand, please reference the
instructions included in the wall mounting kit ( not included ).
Ensure the TV stand is still attached with the bottom foam packaging material in the package.
PreparationInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
Read all instructions before continuing with the stand installation.
a. Open the box, and make sure all necessary parts are in the box. The package contains:
LCD TV
b. Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the cloth. Fit the
stand onto the bottom of the LCD TV unit as shown:
STAND
Introducing the LCD TV
c. Then push until stand into the LCD TV’s stand socket.
Using The DTV Features
5
Preparation
Your LCD TV
Introducing the LCD TV
Installing the LCD TV
How to setup the TV
1
( refer to page 13 ).
2
3
Step1 Press and lift the back cover up to open the battery
compartment of the remote control.
Step2 Insert two AAA size batteries. Make sure to match the ( + )
and ( - ) ends of the batteries with the ( + ) and ( - )
ends indicated in the battery compartment.
Snap the cover back into place.
Using The Features Troubleshooting Specifications
Use an antenna cable to connect the VHF / UHF signal to the LCD TV’s ANT. terminal
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Do not use caustic cleaners ( porcelain, stainless steel, toilet, or oven cleaner etc. ) on the remote,
as it may suffer damage.
Using The DTV Features
Handling the Remote Control
ƒ It could cause corrosion or battery leak age and may result in physical injury and/or property
damage including fire.
ƒ Never mix used and new batteries in the device.
ƒ Replace all the batteries in a device at the same time.
ƒ Remove the batteries if the remote control is not going to be used for an extended period of time.
ƒ To avoid possible failure, read the following instructions and handle the remote control property.
ƒ Do not drop or cause impact to the remote control.
ƒ Do not spill water or any liquid on the remote control.
ƒ Do not place the remote control on a wet object.
ƒ Do not place the remote control under the direct sunlight or near sources of excessive heat.
NOTE: Remove the battery from remote control handset when it is not to be used for a long period.
Otherwise it can be damaged due to leakage of battery.
4
Connect other an external A/V device
Effective range
Your remote control can be activated from up to the LCD TV 5m away, if points directly in
front of the device.
( refer to page 14-17 ).
5M
30
O
O
30
6
Front / Right Side View
LED
The LED light indicates when the
LCD TV is activated.
VOL.+
VOL.
CH.
CH.
MENU
INPUT
Your LCD TV
PreparationInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
Introducing the LCD TV
INPUT
VOL. + / -
Adjust the volume up and down.
Select the main-menu item and
change values for items when in the
OSD mode.
CH.
Ÿź
Scan up and down through channels.
Select sub-menu item when in the
OSD mode.
MENU
Press once to display the OSD ( on
screen display ), press again to turn
the OSD off.
INPUT
Choose from different input signal
sources.
Turn the LCD TV on and into standby
mode.
IR
Infrared
Receiver
Connect to the external earphone
for private listening.
Using The DTV Features
7
Preparation
Your LCD TV
Introducing the LCD TV
Installing the LCD TV
AC IN 100-240V
Using The Features Troubleshooting Specifications
Rear View and Jacks
1
AC POWER
50/60Hz
SWITCH
PCAUDIO IN
AC IN 100-240V
AC POWER
50/60Hz
SWITCH
PCAUDIO IN
6
4
3
VHF/UHF IN
5
2 8
7
9
VHF/UHF IN
Using The DTV Features
ITEM
1 AC IN/Power Switch
2 AV1
SCART
3 AV2
S-VIDEO/AUDIO( L/R )
4 AV3
VIDEO/AUDIO( L/R )
5 AV4
Y, Pb, Pr/AUDIO
( L/R )
6 AV5
VGA IN/PC AUDIO IN
7 AV6
HDMI IN
8 DIGITAL OUT
9 RF/ANT.
VHF/UHF IN
DESCRIPTION
Connect the AC power cord to this socket. Make sure that this
switch is in the ON position.
Connect to external equipment with SCART socket. This SCART
input allows audio and CVBS / YC / RGB+CVBS, RGB, S-VIDEO
from an external device to be shown on your TV.
Connect to the S- VIDEO output sockets and Audio output sockets
on your video equipment.
Connect to the composite A /V output sockets on your video
equipment.
Connect to the component ( Y, Pb, Pr ) video sockets and audio
( L/R ) sockets of your DVD player, HDTV, or video equipment.
Connect to a PC or other devices with a VGA interface.
Connect to devices with a HDMI interface.
Connect to digital out socket on external digital audio equipment.
(Only for DVB-T Input Source)
Connect to the VHF/UHF aerial or cable.
S-VIDEO and Video have a common audio input, if both devices are being used at the same time
audio from both will be heard at same time. Only switch on the required device to stop the mixing
of audio.
8
Your Remote Control
RCT-1522
1
Turn the LCD TV on and into standby
mode.
2
Mute and restore your LCD TV sound.
Your Remote Control
3
4
6
7
1
2
5
8
PreparationInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
Introducing the LCD TV
3
I-II
Cycle through the TV Sound options:
MONO / DUAL / STEREO.
This function is not available for this model.
4 5 6
9
0-9
Select and switch to a channel by using 0-9 buttons.
GUIDE / +10
10
In DTV mode, press GUIDE button to display the
Electronic Program Guide.
11
SLEEP
Cycle through the LCD TV sleep timer:
60 minutes.
12
SUBTITLE
Press the SUBTITLE button to display the subtitle
which is broadcast with the program on the screen.
7 8
OFF, 15, 30, or
9
10
12
/
13
11
14
13
VOL. +/-
Increase and decrease volume.
14
CH. Ÿ/ź
Change the channels up and down.
Not all region supports DVD-please check with your program service provider.
Using The DTV Features
9
Preparation
Introducing the LCD TV
Installing the LCD TV
Your Remote Control
Your Remote Control
INPUT
15
Display the source list, useŸźbuttons to select the signal
sources: TV / AV1 ( SCART ) / AV2 ( S-VIDEO ) / AV3
(CVBS) / AV4 ( Y,Pb,Pr ) / AV5 ( VGA ) / AV6 ( HDMI ) / DTV.
16
EXIT
Exit the OSD menu. ( On Screen Display ).
17
MENU
Display the OSD menu on the screen.
18
Using The Features Troubleshooting Specifications
19
20
21
Using The DTV Features
ŸźŻŹ
Allow you to move, select a variety of information
such as the current channel and the input source.
INFO
Press once to display a variety of information such
as the current channel and the input source.
Turn Teletext On / Mix / Off.
Display the main index in Teletext mode.
* USB/CARD - This function is not available for this model.
Reveal hidden information such as the answer
to a quiz in Teletext mode.
* AUDIO - This function is not available for this model.
Display the top, bottom or all of page to easily read in
Teletext mode.
* ZOOM - This function is not available for this model.
OK
15
16
19
21
RCT-1522
22
Access the TELETEXT items
or corresponding pages.
The coloured buttons are used to
access interactive modes when
using Digital / Freeview TV channels.
17
18
20
22
10
Freeze a multi-page passage on screen in Teletext mode.
* GO TO - This function is not available for this model.
The DVD, Card Reader, and USB Memory Disk function buttons on the remote control are not
available for this model.
Chapter 2 Installing The LCD TV
Refer to the owner’s manual of any external equipment for connection procedures.
When connecting any external equipment, do not connect any AC power cords to wall outlets until all other
connections are completed.
CONNECTING A TV CABLE OR AN ANTENNA
Antenna Connection
The antenna requirement for good colour TV reception is more important than those for a black & white TV
reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
Ŷ A 75-ohm system is generally a round cable ( not included ) with IEC-type connector that can easily be
attached to a terminal without tools.
IEC-type connector
PreparationInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
Introducing the LCD TV
75-ohm coaxial cable ( round )
ŶA 300-ohm system is a flat twin-lead cable (not included ) that can be attached to a 75-ohm terminal
through a 300-75-ohm adapter ( not included ).
300-ohm twin-lead cable ( flat )
Using The DTV Features
11
Preparation Installing the LCD TV
Connecting a TV Cable or an Antenna
Introducing the LCD TV
Using The Features
Cable TV ( CATV ) Connection
Ŷ A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, connect the 75-ohm cable into the
ANT. terminal.
Ŷ Some cable TV companies offer premium pay channels. Since the signals of these
premium pay channels are scrambled, a cable TV converter/descrambler is generally
provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels. ( Set your TV to
channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company. )
For more specific instructions on installing cable TV, consult your cable TV company. One possible method
of connecting the converter/descrambler provided by your cable TV company is shown in the diagram
below.
RF switch
( not included )
2-set signal
splitter
(not included)
Cable TV Line
VHF / UHF IN
OUT
A
IN
B
Cable TV converter/
descrambler
( not included )
Using The DTV Features
Troubleshooting Specifications
ŶThe RF switch ( not included ) is required to provide two inputs ( A and B ). Setting the RF
switch to position A allows viewing of all unscrambled channels by using the TV channel keys.
ŶSetting the RF switch to position B allows viewing of all scrambled channels via the converter /
descrambler by using the converter channel keys.
12
Loading...