Hitachi HILS86204 User Manual
Installation Manual
Model: HILS86204
Interactive Flat Panel Display
86”
(85.60”)
2
QUICK SETUP GUIDE
For further information, see the user manual.
Please contact directly if you have questions on the use of the touch monitor after
reading the Installation Manual and User Manual.
IMPORTANT:
Please read the precautions, safety instructions and this installation manual carefully
before installing the touch monitor.
CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
1. Precautions and safety instructions
Before using the touch monitor, please read this quick setup guide thoroughly to help
protect against damage to your own and other people‘s property and ensure your own
and other people‘s personal safety.
Be sure to observe the following instructions.
For your safety, be sure to observe the warnings contained in this guide.
For installation or adjustment, please follow this quick setup guide and refer all
servicing to qualified service personnel.
Safety Precautions
If smoke or a peculiar smell comes from the monitor, remove the power plug from the
socket immediately.
Failure to do above, it may result in an electric shock.
Contact your dealer for inspection.
If the monitor has been turned on but there isn’t a picture, remove the power plug
from the socket immediately. Failure to do above, it may result in an electric shock.
Contact your dealer for inspection.
If water is spilled or objects are dropped inside the monitor, remove the power plug
from the socket immediately.
Failure to do above, it may result in an electric shock.
Contact your dealer for inspection.
If the monitor is dropped or the cabinet is damaged, remove the power plug from the
socket immediately.
Failure to do above, it may result in an electric shock.
Contact your dealer for inspection.
To turn off the power of the monitor completely, remove the power plug from the
socket
If the power cord or plug is damaged or becomes hot, turn off the main power switch
of the monitor, make sure the plug has cooled down and remove the plug from the
socket. If the monitor is still used in this condition, it may cause an electric shock.
Contact your dealer for replacement.
3
Moving and Carrying Notice
Moving Notice:
Moving the monitor requires at least four people. If not, it may drop and a serious
injury may result.
Carrying Notice:
This monitor is heavy; please follow the instructions below when you are ready to
carry the monitor. Failure to do, it may cause injury.
4
Installation
Don‘t install in a high-temperature environment.
If the monitor is used in a high-temperature environment or in direct sunlight, it may
cause the case or other parts to become distorted or damaged resulting in
overheating or electric shock. Don‘t install in a high-humidity environment. This may
cause overheating or electric shock.
Don‘t install near any heat sources such as radiators, hot-air outlets, stoves, or other
apparatus that produce heat. This may cause an electric shock.
Don‘t overload sockets or cables beyond electrical capacity. Don‘t use extension
leads, otherwise this may cause an electric shock.
Don‘t insert the power plug into a socket other than 100~240V AC.
This may cause an electric shock.
• Don’t use a damaged power plug or worn socket.
• Don‘t insert the wrong plug as it may cause an electric shock.
Do not place monitors on unstable shelves or surfaces. They could collapse and
cause damage. Only install the unit on vertical, stable and level surfaces.
Don‘t place objects on the touch monitor.
• If the touch monitor is covered or the vents are blocked, the monitor could overheat
and cause a fire.
• If metal or liquid gets into the monitor, it may cause an electric shock.
• Do not place heavy objects on the monitor as they may fall causing injury.
• Please keep a minimum distance of 10 cm between the monitor and the other
objects for sufficient ventilation.
Don‘t move the touch monitor when it is connected to the power cord and AV cables.
• When moving the monitor, make sure you remove the plug and cables from the
socket or source.
• When unpacking or carrying the monitor, at least 4 people are needed. Make sure
the monitor is carried upright.
• Transport the monitor upright. Avoid placing the monitor face up or face down.
• Handle the monitor gently. Do not drop.
5
Wall mounting safety notes
Please make sure the bracket is fixed to a solid wall.
After assembling, please don‘t pull or shake violently.
Please don‘t install the bracket in direct sunlight or areas of humidity / high
temperature for fear that the quality is affected
Install the bracket at a minimum distance of 10 cm from other objects / walls on either
side. Only attach to vertical walls.
6
2. Package contents
Packing list
Item Q’ty
1. Interactive monitor
1
2. Carton
1
3. Bottom cushion
2
4.
Top cushion 3
5.
Packing bag 1
6. Accessories box
1
Unpacking
1. Set the LCD Monitor box in front and upright position.
2. Cut the banding and take off 10 clips
3. Open from the top of the box before removing the top cushions.
4. Remove the top cushion and take the accessories box out.
5. Take vinyl bag off and assembled bracket if it needs
Contents of the Accessories box
1. Power cord
2. Remote controller (2x AAA batteries included)
3. USB cable
4. HDMI cable
5. Pen x2
6. CD
Loading...