Hitachi DZ-BX35ESW, DZ-GX3200ESW, DZ-GX3300ESWC, DZ-GX3200ESWC, DZ-GX3100ESWC Instruction Manual
...
English
DVD-RAM DVD-RW
DVD-R +RW
DZ-GX3300E(SW)
DZ-GX3200E(SW)
DZ-GX3100E(SW)
DZ-BX37E(SW)
DZ-BX35E(SW)
DZ-GX3300E(SWC)
DZ-GX3200E(SWC)
DZ-GX3100E(SWC)
DZ-BX37E(SWC)
DZ-GX3300E(SWH)
DZ-GX3200E(SWH)
DZ-GX3100E(SWH)
DZ-BX37E(SWH)
DZ-BX35E(SWH)
DZ-GX3300E(AU)
DZ-GX3200E(AU)
DZ-GX3100E(AU)
DZ-BX37E(AU)
DZ-BX35E(AU)
Instruction manual
To obtain the best performance and ensure years of
trouble-free use, please read this instruction
manual completely.
Инструкция по эксплуатации
Если Вы хотите получить надежные
результаты при воспроизведении и работать
видеокамерой в следующие годы без
возникновения каких-либо проблем, прежде
всего прочтите полностью эту инструкцию по
эксплуатации.
DVDCAM PC Software Support Centre
URL http://dvdcam-pc.support.hitachi.ca/
DZ-GX3300E
DZ-GX3100E
DZ-BX37E/BX35E
DZ-GX3200E
Support Center phone numbers for software provided:
Телефон центра программного обслуживания для прилагаемого программного обеспечения:
PIXELA CORPORATION
+63-2-438-0090 URL: http://www.pixela.co.jp/oem/hitachi/e/index.html
English
2
Important Information
For Your Safety
The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the
camera/recorder is to be left unattended for a long period of time, turn it off.
The DVD video camera/recorder and AC
adapter/charger have the following caution
marks.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Identifications of caution marks
Precautions
WARNING: Many television programmes and
films are copyrighted. In certain circumstances,
copy-right law may apply to private in-home
videotaping of copyrighted materials.
WARNING: To prevent risk of injury or damage
to your DVD video camera/recorder and the AC
adapter/charger, use only the DZ-BP14S/DZBP07PW/DZ-BP14SW/DZ-BP7SW battery and
DZ-ACS3 (SW) AC adapter/charger.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE
RECOMMENDED ACCESSORIES ONLY.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol warns the user that
uninsulated voltage within the unit
may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous
to make any kind of contact with any
inside part of this unit.
This symbol alerts the user that
important literature concerning the
operation and maintenance of this unit
has been included. Therefore, it should
be read carefully to avoid any
problems.
The liquid crystal display (LCD) panel is
made by highly precise technology. More than
99.99% of its picture elements (pixels) are
effective, but some (less than 0.01%) may
appear as coloured bright dots. This does not
indicate a fault as the LCD panel stretches the
limits of current technology.
CLASS 1
LASER PRODUCT
CAUTION
This product contains a laser diode of higher
class than 1. To ensure continued safety, do
not remove any covers or attempt to gain
access to the inside of the product. Refer all
servicing to qualified personnel.
English
3
IMPORTANT SAFETY INSTRUCTIONS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a
major factor in the design of every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/
recorder and accessory equipment.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
10 Only use attachments/accessories specified by the
manufacturer.
11 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
12 Unplug this apparatus during lightning storms or
when unused for long periods of time.
13 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
14 The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
15 The equipment (AC Adapter/Charger) shall be
used near the socket-outlet and shall be easily
accessible.
English
4
Cautions When Using
Handle the liquid crystal display (LCD) with care:
• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with
a sharp object.
• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear
soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.
• Do not place the DVD video camera/recorder with the open LCD screen down.
• Close the LCD monitor when not using the DVD video camera/recorder.
Liquid crystal display (LCD) and viewfinder:
• The LCD screen and viewfinder are the products of highly precise technology. Among the total
number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels
for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as colored dots
(red, blue, green). This shows the limitations of the current technology, and does not indicate a
fault that will interfere with recording.
• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/
recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal
brightness will be restored when the temperature inside the DVD video camera/recorder rises.
Hold the DVD video camera/recorder correctly:
• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The
viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.
Do not subject the DVD video camera/recorder to impact:
• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it
against a hard object or let it fall.
• When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD
video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause
malfunctions or defects.
No water or oil!
• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric
shock, malfunctions or defects.
Heat on surface of product:
• The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly
warm, but this does not indicate a fault.
Screen on connected TV:
• Never leave the disc navigation screen, still image or camera image displayed on your TV to which
the DVD video camera/recorder is connected: Doing so could result in displayed image retention
or phosphor degradation of TV screen.
Be careful of ambient temperature:
• Using the DVD video camera/recorder in a place where the temperature is over 40ºC or under 0ºC
will result in abnormal recording/playback.
• Take care that the temperature of this DVD video camera/recorder, when connected to PC does
not rise excessively (reference for usage: approx. 30 minutes at about 30ºC).
• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the
temperature is very high for a long time: This could cause malfunctions.
English
5
Do not point directly at the sun:
• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction
or a fire could occur.
• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This
could cause malfunctions.
Do not use the DVD video camera/recorder near TV or radio:
• This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD video camera/recorder near strong radio waves or magnetism:
• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near a
radio wave tower or electric appliances, noise could enter video and audio that are being recorded.
During playback of normally recorded video and audio, noise may also be present in picture and
sound.
At worst the DVD video camera/recorder could malfunction.
Do not expose the DVD video camera/recorder to soot or steam:
• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.
Do not use the DVD video camera/recorder near corrosive gas:
• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated
by gasoline or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot
spring area, the external or internal terminals could corrode, which would disable normal
operation, or the battery connecting terminals could corrode, so power will not turn on.
Do not use the DVD video camera/recorder near ultrasonic humidifier:
• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the
air, and white particles could adhere to the optical head of the DVD video camera/recorder, which
could cause it to operate abnormally.
Do not expose the DVD video camera/recorder to insecticide:
• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block,
and in such a case the DVD video camera/recorder might not operate normally. Turn the DVD
video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.
Do not use a generally available 8 cm CD lens cleaner:
• Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.
• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.
• If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.
Be careful of moisture condensation:
• When you move the DVD video camera/recorder between places where the difference in
temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or
vehicle – condensation (vapor in air warmed or cooled to water droplets) could occur on the lens
and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of
disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft,
dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may
remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2
hours before using it again.
Do not use the DVD video camera/recorder for a long uninterrupted period of time:
• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance
camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video
camera/recorder could exceed the limit and the recording/playback operation may slow down or
other faults could occur. If this happens, turn it off and wait for a while before using it again.
English
6
Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or
CARD ACCESS indicator is lit or blinking:
• The ACCESS/PC or CARD ACCESS indicator is lit or
blinking to show that data is being written to disc or card,
or being read from it. At this time, do not do any of the
following, so as not to damage the data:
− Remove battery
− Disconnect AC adapter/charger
− Plug or unplug PC connection cable
− Remove disc or card
− Subject DVD video camera/recorder to severe
vibrations or impact
− Violently open or close the LCD monitor
The ACCESS/PC indicator will light for a while after
recording is finished. While it is lit, do not subject the DVD
video camera/recorder to any vibration or impact, and do
not disconnect the battery or AC adapter/charger.
If you turn the DVD video camera/recorder off while the
ACCESS/PC or CARD ACCESS indicator is lit or blinking,
turn it on again with the disc or card loaded in it: Repair of
the disc or card will be executed automatically (see page 132).
Do not wipe the DVD video camera/recorder case with benzene or thinner:
• The coating of case could peel off or the case surface could deteriorate.
• When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
• For optional accessories, observe the cautions and follow instruction manuals attached.
The battery provided has not been charged at time of purchase:
• Charge it before using the DVD video camera/recorder (see page 26).
• The battery will discharge as time passes. (The battery is produced so that it discharges on its own
in order to protect its characteristics.)
Disc cannot be inserted or removed unless a charged battery or AC adapter/
charger is connected to the DVD video camera/recorder.
Be sure to set the power switch to “OFF” when turning the DVD video camera/
recorder off:
• Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being
powered could cause a fault.
CARD ACCESS indicator
ACCESS/PC
indicator
English
7
Cautions When Storing
Do not leave the DVD video camera/recorder in a place where the temperature is
very high for a long period of time:
• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave
the DVD video camera/recorder in such a place, it could malfunction or the case could be
damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a
heater.
Do not store the DVD video camera/recorder in a place where the humidity is high
or in a dusty place:
• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,
the lens could be moldy, and the DVD video camera/recorder could become inoperable. It is
recommended that you put the DVD video camera/recorder with desiccant in a box when storing
it in a closet, etc.
Do not store the DVD video camera/recorder in a place subject to strong
magnetism or intense vibrations:
• This could cause malfunctions.
Detach the battery from the DVD video camera/recorder and store it in a cool place:
• Leaving the battery attached or storing it at high temperature could shorten its life.
Suggestions and Restrictions
Make a trial recording:
• Always make a trial recording before doing actual recording to make sure that recording is normal.
The data that have not been stored normally because of a defect in the DVD video camera/
recorder cannot be restored.
It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for
trial recording.
Do not use the DVD video camera/recorder for professional applications:
• This DVD video camera/recorder is designed and produced for home-use recording and playback.
The recorded contents cannot be compensated for:
• Hitachi cannot compensate for any damages caused when recording is not made normally or
recorded contents cannot be played back because of a defect in the DVD video camera/recorder,
disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.
• If you or a third party makes a mistake when handling this DVD video camera/recorder, disc,
card, etc., the recorded contents may be lost. We cannot be responsible for compensation for
damage due to loss of recorded contents.
Copyright:
• Data recorded on the disc or card in this DVD video camera/recorder using other digital/analog
media or devices are protected by the copyright act and cannot be used without permission of the
owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some
demonstrations, performances and exhibitions, even for personal enjoyment.
English
8
CLEANING
Be sure to set the power switch to “OFF” before cleaning this DVD video camera/recorder.
●Cleaning LCD screen and camera
lens
Use dry, soft cloth to wipe dirt off. When
cleaning the LCD screen, be careful not to use
force, scratch it, or subject it to impact: Doing
such could cause a defect in the screen, result in
display unevenness, or damage the LCD
monitor.
●If dust adheres to the viewfinder
lens, remove it using a cotton
swab, etc.
Do not rub the lens with force: Doing so could
scratch the lens.
●Do not use benzene or thinner to
clean DVD video camera/recorder
case
The coating of case could peel off or the case
could deteriorate. Wipe off dirt on the case with
a moist cloth which has been completely wrung
out. When using chemical cleaning cloth, follow
instructions for use.
HANDLING DISCS
●Using discs
Discs are very delicate recording media.
Carefully read the following cautions and
observe them:
• Always use a brand new disc when recording
important material.
• Be sure not to touch the recording surface of
disc, or dirty or scratch it.
• If there is dust, scratch, dirt on disc or if it is
warped, the following phenomena may occur:
− Block noise in playback
image
− Momentary stop of
playback image
− Sound interrupted during
playback, or abnormal
sound
− Blue thumbnail
display* (Fig. 1)
− Disc cannot correctly
be recognized
− Disc cannot be
initialized
− Delay between video
and audio
Even if disc is normal, the above phenomena
may occasionally occur. While the ACCESS/
PC indicator is lit, do not subject disc to
vibrations or impact, and avoid using DVD
video camera/recorder at extremely high or
low temperatures, or in environment where
condensation is likely to occur.
• When recording images,
the DVD video camera/
recorder may avoid the
portions of disc where
recording is not possible,
due to dust, scratches,
etc. [It will pause 9 at
such a portion and
automatically restart
recording (:).]
This will cause recording to be interrupted for
several seconds to several minutes, and
multiple thumbnails will be created by one
recording session as shown above. In this case,
the recordable time on disc will decrease.
• Be careful when removing the disc since the
metal of removal slot of DVD video camera/
recorder, and disc itself, may be hot.
●Storing discs
• When storing disc, replace it in the plastic case
in which it was purchased.
• Be careful that no condensation occurs on disc.
• Do not place disc in following places:
− Direct sunlight for a long time
− Where humidity is high or in dusty place
− Where there is heat from a heater, etc.
Block noise
001/ 006All Programs
PLAY
Fig. 1
*
001/ 002All Programs
PLAY
(Recording one scene
may produce multiple
thumbnails.)
English
9
DISC CLEANING
Use the disc cleaning cloth provided to lightly
wipe off any dirt adhering to the disc as shown
in the figure. Do not wipe the disc with force:
Doing so could cause scratches.
Never use solvent (thinner, water, antistat or
detergent) for cleaning.
Lightly wash the dirty cleaning cloth with
detergent: The dirt removal capacity of the cloth
will improve (rinse the cloth well with water so
that no detergent remains).
Read This First
To guide you, we have included following five chapters.
• The section on “Setups” explains how to set
up the DVD video camera/recorder, battery,
and set the date/time.
• The section on “Basic Techniques” explains the
basic operation of this DVD video camera/
recorder – recording of movies, still images,
external input, and playback of recorded
images.
• The section on “Disc Navigation” explains
editing with Disc Navigation: Refer to this
section when finalizing DVD-RW/DVD-R/
+RW disc and initializing DVD-RAM/DVDRW/+RW disc.
• The section on “Connecting to PC” explains
the contents of provided CD-ROM and how to
install the software included.
• “Subsidiary Information” includes an
introduction to products sold separately, and
troubleshooting.
We want this manual to be as helpful as
possible, so it includes two easy ways to find the
information you need:
• A quick index for the information you use
most often.
• A detailed table of contents directing you to
specific information quickly (see pages 11 –
13).
Get to know your DVD video camera/recorder by
using this manual, and get to know Hitachi. We
appreciate your business.
Quick Index
Available Discs................................................ 23
Recording Movie ............................................. 40
Playing Back.................................................... 68
Functions Available with Disc Navigation ........ 75
Connecting to a TV........................................ 105
Connecting to PC .......................................... 111
Use the disc cleaning
cloth to clean from inner
to outer edges in axial
direction.
With this DVD video camera/recorder you can view the picture being recorded or the playback
picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor
switches the picture to appear on the LCD monitor or in the viewfinder.
It is possible to switch the language in the on-screen display of this DVD video camera/recorder
(see page 33).
English
10
About This Manual
●Displays in this manual
Understand that the displays are different from those you will actually see in the viewfinder or on
the LCD screen.
●Notation of cancel button
Press the STOP/EXIT button to stop your operation midway, or return the menu screen to the
preceding one. The expression “press the button” will be used in this text.
●, , , , and marks beside headings
Some functions of this DVD video camera/recorder are unavailable with disc or card used. Refer to
the marks at right above each function to identify whether the disc or card is compatible with the
function. Refer to these marks and identify the functions and operation to match the disc or card you
use.
●Illustrations in this manual
Although the external appearances of DZ-GX3300E/GX3200E/GX3100E/BX37E/BX35E are
different, the method of operating these models is identical.
The illustrations of DZ-GX3300E are used for the explanation in this text.
Microsoft
®
, Windows®, Windows® Me, Windows® 2000 Professional, and Windows® XP are
registered trademarks of Microsoft Corporation.
Intel
®
, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation.
Macintosh is a trademark of Apple Computer, Inc.
IBM
®
and PC/AT® are registered trademarks of International Business Machines Corporation.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each
individual company.
SD logo is a trademark.
●
This instruction manual shows 19 DVD video camera/recorder models DZ-GX3300E (SW), DZ-GX3200E (SW), DZ-GX3100E (SW), DZ-BX37E (SW), DZ-BX35E (SW),
DZ-GX3300E (SWC), DZ-GX3200E (SWC), DZ-GX3100E (SWC), DZ-BX37E(SWC),
DZ-GX3300E (SWH), DZ-GX3200E (SWH), DZ-GX3100E (SWH), DZ-BX37E (SWH),
DZ-BX35E (SWH),
DZ-GX3300E (AU), DZ-GX3200E (AU), DZ-GX3100E (AU), DZ-BX37E(AU), DZ-BX35E (AU).
The DZ-GX3300E (SW), DZ-GX3300E (SWC), DZ-GX3300E (SWH) and DZ-GX3300E (AU)
functions and specifications are referred to as “DZ-GX3300E”.
The DZ-GX3200E (SW), DZ-GX3200E (SWC), DZ-GX3200E (SWH) and DZ-GX3200E (AU)
functions and specifications are referred to as “DZ-GX3200E”.
The DZ-GX3100E (SW), DZ-GX3100E (SWC), DZ-GX3100E (SWH) and DZ-GX3100E (AU)
functions and specifications are referred to as “DZ-GX3100E”.
The DZ-BX37E (SW), DZ-BX37E(SWC), DZ-BX37E (SWH) and DZ-BX37E (AU) functions and
specifications are referred to as “DZ-BX37E”.
The DZ-BX35E (SW), DZ-BX35E (SWH) and DZ-BX35E (AU) functions and specifications are
referred to as “DZ-BX35E”.
No model names are mentioned for functions and specifications common to all models; if there are
any differences between models, the model names are specified.
English
11
Table of Contents
Important Information.........................................2
For Your Safety..................................................2
Precautions ........................................................2
IMPORTANT SAFETY INSTRUCTIONS ...........3
Cautions When Using ........................................4
Cautions When Storing ......................................7
Suggestions and Restrictions.............................7
CLEANING ............................................................8
HANDLING DISCS ................................................ 8
DISC CLEANING................................................... 9
Read This First...................................................9
About This Manual ...........................................10
Table of Contents.............................................11
Checking Provided Accessories.......................14
Names of Parts ................................................15
Setups
Demonstration Function...................................19
Setting Up the DVD Video Camera/Recorder ..19
HOLDING DVD VIDEO CAMERA/RECORDER.. 19
ATTACHING SHOULDER STRAP...................... 19
ATTACHING LENS CAP ..................................... 20
INSERTING BATTERY INTO REMOTE
CONTROL ........................................................20
REMOVING BATTERY FROM REMOTE
CONTROL ........................................................21
Discs and Cards...............................................22
AVAILABLE DISCS .............................................23
INFORMATION ON DVD-R DISC ....................... 23
NOTES ON FINALIZATION:................................23
EXAMPLES OF DISCS THAT CANNOT BE USED
ON THIS DVD VIDEO CAMERA/RECORDER:24
AVAILABLE CARDS............................................ 24
COMMON CAUTIONS FOR DISC AND CARD .......24
Preparations for Power Supply ........................25
USING DVD VIDEO CAMERA/RECORDER WITH
AC ADAPTER/CHARGER................................ 25
Setting Up the Battery......................................26
CHARGING BATTERY........................................ 26
ATTACHING BATTERY TO DVD VIDEO
CAMERA/RECORDER..................................... 27
REMOVING BATTERY........................................27
BATTERY REMAINING LEVEL INDICATOR...... 29
EFFICIENT USE OF BATTERY .......................... 29
Turning DVD Video Camera/Recorder
On and Off .....................................................30
VIEWING IMAGE ON LCD MONITOR
SCREEN........................................................... 31
VIEWING SUBJECT THROUGH
VIEWFINDER ...................................................31
Setting Date and Time..................................... 32
CHANGING DISPLAY FORMAT OF
DATE AND TIME ..............................................32
Initial Settings.................................................. 33
SWITCHING OPERATING SOUND ON OR OFF
(BEEP)..............................................................33
TURNING DVD VIDEO CAMERA/RECORDER
OFF AUTOMATICALLY (POWER SAVE) ........33
CHANGING DISPLAY LANGUAGE
(LANGUAGE)....................................................33
RESETTING MENU SETTINGS TO DEFAULTS
(RESET)............................................................34
TURNING RECORD LED ON OR OFF
(RECORD LED)................................................34
CHANGING SETTING OF DEMONSTRATION ..34
LCD/EVF Setup............................................... 35
ADJUSTING BRIGHTNESS OF LCD SCREEN
(LCD BRIGHTNESS) AND VIEWFINDER
(EVF BRIGHTNESS) ........................................35
ADJUSTING COLOR DENSITY
(COLOUR LEVEL)............................................36
ALWAYS DISPLAYING IMAGE IN
VIEWFINDER ...................................................36
Inserting and Removing Disc .......................... 37
Inserting and Removing Card.......................... 39
Basic Techniques
Recording Movie ............................................. 40
Recording Stills ............................................... 41
Swift Restart of Recording (SLEEP/RESTART
button)........................................................... 42
On-Screen Information.................................... 43
INFORMATION DISPLAY DURING
RECORDING....................................................43
Checking Flow of Menu................................... 48
Zooming .......................................................... 50
MACRO RECORDING ........................................50
RECORDING SUBJECTS FOR STRONGER
WIDE-ANGLE OR TELEPHOTO EFFECT.......51
Manually Focusing Subject ............................. 52
FOCUSING DURING RECORDING.................... 52
Adjusting Brightness of Image to be recorded
(Exposure) .................................................... 54
Compensating for Backlight ............................ 54
Built-in Video Flash (for DZ-GX3300E only).... 55
Setting Up Camera Functions ......................... 56
SELECTING SHOOTING MODE TO MATCH THE
SUBJECT
(SWITCHING PROGRAM AE MODE).............. 56
RECORDING DARK SUBJECTS USING LCD
MONITOR LIGHT .............................................57
ADJUSTING COLOR (WHITE BALANCE)..........57
English
12
USING THE ELECTRONIC IMAGE STABILIZER
(EIS).................................................................. 59
RECORDING SUBJECT USING LARGE
MAGNIFICATION (DIGITAL ZOOM)................ 59
REDUCING WIND NOISE DURING RECORDING
(MIC.FILTER) ...................................................59
Setting Up Record Functions........................... 60
SWITCHING MOVIE QUALITY (VIDEO MODE). 60
SETTING TO WIDE TV SCREEN MODE (16:9
MODE).............................................................. 61
SWITCHING QUALITY OF STILL IMAGE
(QUALITY)........................................................ 63
RECEIVING IMAGE FROM ANOTHER DEVICE
(INPUT SOURCE) ............................................ 63
SWITCHING EXTERNAL INPUT RECORDING
METHOD (PHOTO INPUT) ..............................64
SELF-TIMER .......................................................64
SETTING ON-SCREEN DISPLAY OUTPUT ON
OR OFF (OSD OUTPUT) ................................. 65
Using External Microphone.............................. 65
Disc Navigation
Using Disc Navigation...................................... 66
STARTING OR TERMINATING DISC
NAVIGATION.................................................... 66
PLAYING BACK FROM DISC NAVIGATION
SCREEN........................................................... 68
PLAYING BACK LATEST RECORDED SCENE. 69
DELETING LAST RECORDED SCENE.............. 69
CAPTURING PHOTO.......................................... 70
PLAYBACK FROM START OF DISC OR CARD 70
SEARCH PLAYBACK OF MOVIE ....................... 70
FRAME ADVANCE/FRAME BACK/SLOW
PLAYBACK OF MOVIE .................................... 70
SKIP PLAYBACK OF MOVIE.............................. 71
PLAYING BACK STILLS .....................................71
JUMPING TO SPECIFIED POINT (GO TO) ....... 72
INFORMATION DISPLAY DURING PLAYBACK 73
SELECTING MULTIPLE SCENES...................... 74
SELECTING CONSECUTIVE SCENES
TOGETHER...................................................... 74
FUNCTIONS AVAILABLE WITH DISC
NAVIGATION.................................................... 75
UNDERSTANDING FLOW OF DISC NAVIGATION
MENU ............................................................... 76
Scene............................................................... 78
DELETING SCENES (EDIT – DELETE) .............78
DIVIDING MOVIES (EDIT – DIVIDE) .................. 79
COMBINING MULTIPLE SCENES (EDIT –
COMBINE)........................................................ 80
ARRANGING ORDER OF SCENES (EDIT –
MOVE).............................................................. 80
DIRECTING SCENES EFFECTIVELY (EFFECT –
FADE)............................................................... 81
PLAYING BACK BY SKIPPING SCENES
(EFFECT – SKIP) ............................................. 82
CHANGING IMAGES FOR THUMBNAILS
(EFFECT – THUMBNAIL)................................. 83
COPYING STILLS ON DVD-RAM DISC TO CARD
(COPY) ............................................................. 84
LOCKING SCENES ON CARD (LOCK).............. 85
SELECTING SCENES USING MENU SCREEN
(SELECT) .........................................................86
DISPLAYING INFORMATION USING MENU
SCREEN (DETAIL)...........................................87
Program ........................................................... 88
WHAT IS “PROGRAM”?...................................... 88
SWITCHING TO THUMBNAIL DISPLAY OF
SPECIFIC DATE (SELECT) .............................88
PLAYING BACK PROGRAM (PLAY) ..................89
CHANGING TITLE OF PROGRAM (TITLE)........ 89
Play List ...........................................................91
WHAT IS “PLAY LIST”?.......................................91
CREATING NEW PLAY LIST (CREATE)............ 91
SWITCHING TO DISPLAY OF EACH PLAY LIST
(SELECT) .........................................................92
PLAYING BACK A PLAY LIST (PLAY)................ 92
ADDING SCENES TO PLAY LIST
(EDITING PLAY LIST) ...................................... 93
DELETING SCENES FROM PLAY LIST
(EDITING PLAY LIST) ...................................... 94
ADDING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ......................94
DELETING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ......................95
SELECTING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ......................95
ARRANGING ORDER OF SCENES (MOVE) .....96
CHANGING TITLE OF PLAY LIST (TITLE)......... 97
DELETING PLAY LIST (DELETE)....................... 97
Go To...............................................................98
TOP (END) ..........................................................98
Disc or Card Management...............................98
INITIALIZING DISC OR CARD
(FORMAT DISC. FORMAT CARD) ..................98
PROTECTING DISC FROM WRITING
(PROTECT DISC)............................................. 99
VERIFYING REMAINING FREE SPACE ON DISC
OR CARD (CAPACITY)....................................99
UPDATING CONTROL INFORMATION OF DVD-
RAM/DVD-RW (VR-mode) DISC (UPDATE
CONTROL INFO.) ..........................................100
FINALIZING DVD-RW/DVD-R/+RW DISC
(FINALIZE DISC) ............................................ 101
ADDITIONALLY RECORDING ON FINALIZED
DVD-RW (VF-mode)/+RW
(UNFINALIZE DISC).......................................102
Others ............................................................ 103
DISPLAYING MOVIES OR STILLS
INDEPENDENTLY (CATEGORY) .................. 103
PLAYING BACK SCENES REPEATEDLY
(REPEAT PLAY).............................................103
PLAYING BACK WIDE-MODE IMAGES ON 4:3
DISPLAY TV (TV TYPE)................................. 104
SLIDE SHOW (CONTINUOUS PLAYBACK OF
STILLS)........................................................... 104
Viewing on TV Screen ...................................105
CONNECTING TO A TV....................................105
VIEWING ON TV SCREEN ...............................106
Playback on DVD Recorder/Player................ 107
English
13
PLAYING BACK DVD-RAM/DVD-RW (VR-mode)
DISC ...............................................................107
PLAYING BACK DVD-RW (VF-mode)/DVD-R/
+RW DISC ...................................................... 107
Recording (Dubbing) Images .........................108
RECORDING (DUBBING) IMAGES FROM
OTHER VIDEO DEVICE................................. 108
RECORDING (DUBBING) IMAGES ON OTHER
VIDEO DEVICES............................................ 110
Connecting to PC
(DZ-GX3300E/GX3200E/GX3100E/
BX37E)
Software Provided..........................................111
Requirements of available PC........................112
Installing Software..........................................113
Connecting to PC via PC Connection Cable..116
USING DISC IN DVD DRIVE BUILT INTO PC.. 118
BEFORE TERMINATING PC CONNECTION
(UNPLUGGING PC CONNECTION CABLE)/
CHANGING OVER POWER SWITCH ...........119
Using Software...............................................120
[When using Windows]
USING IMAGEMIXER 3 ....................................120
VIEWING IMAGES RECORDED ON DISC USING
PC................................................................... 120
CREATING DVD-VIDEO USING IMAGES
RECORDED ON DISC ...................................122
[When using Macintosh]
USING PIXE VRF BROWSER EX AND
IMAGEMIXER VCD/DVD2.............................. 125
IMPORTING IMAGES RECORDED ON DVD-
RAM/DVD-RW/DVD-R INTO PC TO CREATE A
DVD-VIDEO (DVD-RW/DVD-R) .....................125
Viewing Images recorded on Disc using PC ..128
Uninstalling Software .....................................129
Cautions when connecting DVD video camera/
recorder to PC .............................................130
Subsidiary Information
Introduction to Optional Accessories..............131
CAMERA ACCESSORIES ................................131
POWER SUPPLY..............................................131
Trouble Messages..........................................132
Troubleshooting .............................................138
System Reset.................................................146
Major Specifications.......................................147
SIZE AND QUALITY OF PHOTOS.................... 151
RECORDABLE STILLS (PHOTOS) ON CARD. 152
Index ..............................................................153
Be sure to read the following before opening the
package of CD-ROM ...................................155
TOC
English
14
Checking Provided Accessories
Make sure that you have all the following accessories in package:
Battery (model DZ-BP14S):
For DZ-GX3300E/GX3200E only.
Portable power supply for this DVD video
camera/recorder. Charge it before use.
Battery (model DZ-BP07PW):
For DZ-GX3100E/BX37E/BX35E only.
Portable power supply for this DVD video
camera/recorder. Charge it before use.
AC adapter/charger (model DZ-ACS3(SW)):
Used to power the DVD video camera/
recorder from AC outlet, or charge battery.
Mains lead:
Connect between household AC outlet and AC adapter/charger.
DC power cord:
When powering the DVD video camera/
recorder from household AC outlet, use
this cord to connect the DVD video
camera/recorder and AC adapter/charger.
Infrared remote control
(model DZ-RM4W):
Use to control the DVD video camera/
recorder from a distance. For DZGX3300E/GX3200E/GX3100E only.
Lithium battery (model CR2032):
To power the remote control. For DZGX3300E/GX3200E/GX3100E only.
AV/S input/output cable:
Used when viewing the picture played back
on the DVD video camera/recorder on TV
screen, or input or output video from/to
another video device. For DZ-GX3300E/
GX3200E/GX3100E.
AV/S output cable:
Used when viewing the picture played back
on the DVD video camera/recorder on TV
screen, or output video to another video
device. For DZ-BX37E/BX35E only.
Shoulder strap:
Attach to the DVD video camera/recorder
to hang it from shoulder.
Lens cap and lens cap string:
Attach the lens cap when not recording, to
protect the lens.
Single-sided 8 cm DVD-RAM disc:
To record videos (movies) on this DVD
video camera/recorder. For DZ-GX3300E/
GX3200E/GX3100E/BX37E only.
Software CD-ROM:
Use this CD-ROM when connecting the
DVD video camera/recorder to PC. For DZGX3300E/GX3200E/GX3100E/BX37E only.
PC connection cable:
Use this cable when connecting the DVD
video camera/recorder to PC. For DZGX3300E/GX3200E/GX3100E/BX37E only.
Disc cleaning cloth:
Always use this to clean discs.
for DZ-GX3300E (SW),
DZ-GX3200E (SW),
DZ-GX3100E (SW),
DZ-BX37E (SW) and
DZ-BX35E (SW)
for DZ-GX3300E (SWH),
DZ-GX3200E (SWH),
DZ-GX3100E (SWH),
DZ-BX37E (SWH) and
DZ-BX35E (SWH)
for DZ-GX3300E (AU),
DZ-GX3200E (AU),
DZ-GX3100E (AU), DZBX37E(AU) and
DZ-BX35E (AU)
for DZ-GX3300E (SWC),
DZ-GX3200E (SWC),
DZ-GX3100E (SWC),
DZ-BX37E(SWC)
WARNING: Keep
this battery away
from children. If
swallowed, consult
a physician
immediately for
emergency
treatment.
English
15
Names of Parts
1 Flash (for DZ-GX3300E only) (p. 55)
2 Light receiving sensor
(for DZ-GX3300E only)
This sensor controls the amount of light to be
emitted from the built-in flash. Take care not
to block with hand, etc. during recording.
3 Lens cap string attachment hole (p. 20)
4 Stereo microphone
Take care that the microphone is not blocked
by a hand, etc., during recording.
5 Recording indicator (p. 34)
The red indicator will light during recording.
6 Infrared receiver
(for DZ-GX3300E/GX3200E/GX3100E only)
(p. 21)
When the remote control is used to operate
the DVD video camera/recorder, this
receiver will receive the infrared signal.
7 Optical 10× zoom lens
(for DZ-GX3300E/GX3200E only)
Optical 15× zoom lens
(for DZ-GX3100E only)
Optical 25× zoom lens
(for DZ-BX37E/BX35E only)
(p. 50)
8 Lens hood (for DZ-GX3300E/GX3200E/
BX37E/BX35E only) (p. 51)
Always remove this lens hood when using
the optional tele-conversion or wideconversion lens.
9 Zoom lever (p. 50)
Push the lever to the T side for telephoto, or
to the W side for wide-angle.
10 Accessory shoe (for DZ-GX3300E/
GX3200E only) (p. 55)
The optional video flash can be attached
here. (See the instruction manual of device to
be attached for details.)
11 PC connection terminal (TO PC) (for DZ-
GX3300E/GX3200E/GX3100E/BX37E only)
(p. 116)
12 AV input/output jack (p. 105)
13 External microphone jack (for DZ-
GX3300E/GX3200E/GX3100E only) (p. 65)
14 Wide-screen color liquid crystal display
(inside) (p. 31)
14
1312
6
78 9
(Inside the cover)
10
11
23 4 51
13
Although the external appearances of DZGX3300E, DZ-GX3200E, DZ-GX3100E, DZBX37E and DZ-BX35E are different, the method
of operating these models is identical. DZGX3300E illustrations are used in this manual.
English
16
15 Viewfinder (p. 31)
16 Diopter control (p. 31)
To adjust the focus of image appearing in the
viewfinder. (Pull out the viewfinder.)
17 SLEEP/RESTART button (p. 42)
To switch the sleep/restart status between
ON and OFF.
18 ACCESS/PC indicator
(for DZ-GX3300E/GX3200E/GX3100E/
BX37E only)
ACCESS indicator (for DZ-BX35E only)
(p. 6, 40, 41)
Will blink or light when the disc in DVD
video camera/recorder is accessed (write or
read is executed) or the DVD video camera/
recorder is connected to PC.
19 PHOTO button (p. 41)
20 DISC EJECT button (p. 37)
Press down and release this button to open
the cover of disc insertion block.
21 Disc insertion block (p. 37)
22 BATTERY EJECT button (p. 27)
Press this button when removing the battery.
23 Battery attachment platform (p. 27)
24 Record button (REC) (p. 40)
25 LOCK switch (p. 40)
It is recommended that you set the LOCK
switch to (to the upper position) to prevent
the power switch in the “!” position from
accidentally moving to “ ”.
26 Power switch (p. 30)
27 Hand strap (p. 19)
16 17 182219
23 24 26 27
21
25
2015
English
17
28 FINALIZE button (p. 101)
Press this button to finalize the recorded
DVD-RW/DVD-R/+RW.
29 FOCUS button (p. 52)
To switch between manual focus and autofocus.
30 MENU button (p. 32, 48, 79)
Press this button to display the menu for
setting camera functions and Disc
Navigation.
31 SELECT button (p. 74)
32 DISC NAVIGATION button (p. 66)
33 STOP/EXIT button (p. 10, 48, 69)
To end playback or cancel setting of menu.
34 EXPOSURE button (p. 54)
Press this button to adjust the exposure.
35 Speaker (p. 69)
36 RESET button (p. 146)
To reset all settings to defaults (status when
the DVD video camera/recorder was
shipped from the factory).
37
DISPLAY (Screen display) button(p. 46, 73)
Press this button to display the details of
image being played back or camera setting
status, or switch the display off.
38 CARD ACCESS indicator (p. 6, 41)
39 Volume control buttons (VOL)/
%$ buttons (p. 52, 54, 69)
To adjust the volume of sound from speaker,
etc.
40 Card insertion block (p. 39)
41 BLC (backlight compensation) button
(p. 54)
Press this button when subject is being
lighted from rear.
42 2 / 1 / 0 / / / buttons
(p. 32, 48, 69)
Use these buttons to select a scene or menu
item, and then press the center () to play
back the scene, or designate an option from
the menu.
43 Tripod threaded hole
Used to attach the DVD video camera/
recorder to a tripod.
DISPLAY
FOCUS
FINALIZE
EXPOSURE
VOL.
BLC
29 30 31 32 33 34
35 4137 38 39 4036
28
42
43
English
18
44 PHOTO button (p. 41)
45 REC button (p. 40)
46 MENU button (p. 32, 48, 79)
47 SELECT button (p. 74)
48 Reverse search button (p. 70)
49 DELETE button (p. 78)
50 DISC NAVIGATION button (p. 66)
51 DISPLAY button (p. 46, 73)
52 ZOOM T button (p. 50)
53 DIGITAL ZOOM button (p. 50)
54 ZOOM W button (p. 50)
55 Reverse skip button (p. 71)
56 Forward search button (p. 70)
57 Play/pause button (p. 69)
58 Stop button (p. 10, 48, 69)
59 Forward skip button (p. 71)
* The buttons on remote control will function the same as those on DVD video camera/recorder.
REC
PHOTO
DIGITAL
ZOOM
ZOOM
MENU
SELECT
DELETE
DISC
NAVIGATION
DISPLAY
44
45
46
47
48
49
50
53
51
52
55
54
56
57
58
59
19
English
Setups
This section explains preparations for recording – setting up the DVD video camera/recorder
and battery.
Demonstration Function
This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is “Auto”, which will automatically start the demonstration approx. three
minutes after the DVD video camera/recorder is turned on.
Refer to “CHANGING SETTING OF DEMONSTRATION” on page 34 if you
wish to view the demonstration immediately or change the setting to “Off”.
Setting Up the DVD Video Camera/Recorder
HOLDING DVD VIDEO CAMERA/RECORDER
Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb.
Put your hand in a position where you can easily operate the REC button and the Zoom lever.
Adjust the length of hand strap so that the DVD video camera/recorder is stable when you press the
REC button with your thumb.
ATTACHING SHOULDER STRAP
Pass the shoulder strap through
the shoulder strap attachments.
Be sure to pass through the 2 slots.
English
20
ATTACHING LENS CAP
1 Attach the shorter end of lens cap string to
the lens cap.
2 Attach the longer end of lens cap string to the
attachment hole of DVD video camera/
recorder.
3 Push the both sides of cap inward and attach
it over the lens.
Note:
• Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
• When recording, attach the lens cap to the hand strap
by hooking the tab inside the cap onto strap for
comfortable shooting.
INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote control.
1 While inserting a fine rod into the hole
marked PUSH, pull the battery holder out
forward.
2 Insert the lithium battery with the positive $
terminal facing down.
3 Slide the cover to close it.
Note:
The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible with
remote control: Replace the battery.
Shorter end
Longer end
Push and fit
Battery holder
English
21
REMOVING BATTERY FROM REMOTE CONTROL
1 While pushing the battery holder, slide the
battery out.
Warn ing:
• KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
• IF SWALLOWED, CONSULT A PHYSICIAN
IMMEDIATELY FOR EMERGENCY TREATMENT.
• BATTERY MAY EXPLODE IF NOT HANDLED
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE.
Note
:
• Replace the battery with a Hitachi Maxell, Sony,
Panasonic, Sanyo, Toshiba CR2032, or Duracell
DL2032. Use of another battery may present a risk of
fire or explosion.
• Dispose of battery safely in accordance with local
laws. Do not dispose of in fire.
• Do not short circuit the battery.
• Do not hold the battery with the metallic tweezers.
• Keep the battery in a dark, cool, dry place.
• The remote control (DZ-RM4W) and lithium battery
(CR2032) are supplied only with the DZ-GX3300E/
GX3200E/3100E.
●Using remote Control
Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote
controllable distance is up to 5 m.
Note:
• When using the remote control, make sure that the
infrared receiver on DVD video camera/recorder is not
exposed to direct sunlight or any intense light. If the
infrared receiver is subject to light stronger than the
infrared light from remote control, the DVD video
camera/recorder cannot be operated by remote
control.
• If there is an obstacle between the remote control and
infrared receiver on DVD video camera/recorder,
remote control may not be possible.
• The DVD video camera/recorder uses the “VCR2”
remote control code of Hitachi VCRs. If you use a
Hitachi VCR, etc. with remote control code set to
“VCR2”, a VCR placed near the DVD video camera/
recorder will also be operated by the remote control:
To prevent this, change the remote control code of the
VCR.
English
22
Discs and Cards
The following table lists the storage media (discs and cards) that can be used on this DVD video
camera/recorder and the functions which are available with them:
Media
Function DVD-RAM
DVD-RW
(VR mode)
DVD- RW
(VF mode)
DVD-R +RW
SD
memory
card
To record video (p. 40) ●●●●●—
To record photo (p. 41) ● ————●
To delete image just
recorded (p. 69)
●●——●●
To select image and delete it
(p. 78)
●●———●
To edit image (p. 79 – 80) ●●————
To play on other DVD players
and DVD recorders (p. 101)
∴
*1
∴
*1*2
●
*2
●
*2
∴
*1*2
—
*3
To use new disc or new card
without formatting
●
*4
——● — ●
*4
To initialize and reuse (p. 98) ●●●— ●●
To additionally record on
finalized disc
— ●●*5— ●
*5
—
To edit copied video on PC
*9
●
*6
●
*6*7
●
*6*7
●
*6*7
●
*6*7*8
●
To playback video on PC
*9
●
*6
●
*6*7
●
*6*7
●
*6*7
●
*6*7*8
●
To create DVD video using
PC
*9
——●
*6
●
*6
——
To copy still data on PC
*9
●
*10
————●
●: Functions available; —: Not available
*
1: Playable on devices that conform to either 8 cm DVD-RAM, 8 cm DVD-RW (VR mode) or 8cm +RW.
*
2: Must be finalized. Cannot be played on some DVD players or DVD recorders.
*
3: Some DVD devices conform to SD memory card.
*
4: When media that are sold “formatted” are used. If the initialization format differs, the media can be initialized on
this DVD video camera/recorder and then used.
*
5: To additionally record, the finalized disc must be unfinalized.
*
6: The provided software is used.
*
7: Finalize the disc when editing/playeing back on PC.
*
8: The software for Macintosh provided with this DVD video camera/recorder is not compatible with a +RW.
*
9: DZ-BX35E cannot be connected to a PC.
*
10: If you use Windows XP or MAC OS Ver. 10.4 or higher, photos can be imported without using the provided
software.
English
23
AVAILABLE DISCS
This DVD video camera/recorder can use only the 8-cm bare discs not packed in a square cartridge, square
caddy case or round DVD holder. The discs in a square cartridge, square caddy case or round DVD holder
can be used if they are removed from the package, but take great care not to dirty or scratch the bare disc.
Note:
•
It is recommended that you use Hitachi Maxell HG type single-sided discs, since their compatibility with this DVD
video camera/recorder has been confirmed. When using an HG type double-sided disc, take great care with handling
it. Using a disc other than these discs may not allow the DVD video camera/recorder to deliver optimum performance.
INFORMATION ON DVD-R DISC
For optimum recording on DVD-R disc, this DVD video camera/recorder writes control data to the
disc in order to automatically make adjustments when it is inserted and ejected accompanying
recording. If the disc has no area to be written for adjustment, recording may not be possible. To
prevent this, do not insert or eject a DVD-R disc accompanying recording more than 100 times.
This DVD video camera/recorder cannot record a DVD-R in the VR mode.
NOTES ON FINALIZATION:
• Do not insert a DVD-RW (VF-mode)/DVD-R disc recorded on this DVD video camera/recorder
but not finalized, into a recordable device, such as a DVD recorder: The recorded data may be
damaged (except for devices that allow playback of a DVD-RW (VF-mode)/DVD-R disc not
finalized on this DVD video camera/recorder).
• Use only DZ-GX3300E/GX3200E/GX3100E/BX37E/BX35E to record on or finalize a DVD-RW
(VF-mode)/DVD-R/+RW disc recorded on this DVD video camera/recorder but not finalized:
Using any other device could damage the data recorded on the disc.
•
DVD-RW or +RW discs edited and finalized on PC or those finalized on another DVD recorder may not be playable
on this DVD video camera/recorder, depending on the editing software used or recorded status of DVD-R disc.
•
If you insert a DVD-R disc recorded on this DVD video camera/recorder or a DVD video camera/recorder
other than DZ-GX3300E/GX3200E/GX3100E/BX37E/BX35E and not finalized, the Disc Navigation screen
will automatically start, and no recording can be done on the disc nor can it be finalized.
•
Do not insert a DVD-R that was recorded by a DVD recorder manufactured by a company other than Hitachi,
and which has not been finalized, in this DVD video camera/recorder: Doing so will make the disc unusable.
Usable discs and logos Function
DVD-RAM Ver. 2.1 (8 cm)
Allows you to delete unnecessary scenes or edit
scenes.
Also allows you to record photos.
DVD -RW
[Ver1.1 (8 cm) 2x speed (2x/1x)]
Allows you to choose the VR mode for deleting
unnecessary scenes or editing scenes, or the VF
mode in which deletion or editing is not possible, but
high compatibility with DVD players is provided
*1
.
DVD -R
[for General Ver. 2.0 (8 cm)]
Provides high compatibility with DVD players *1. No
deletion or editing is possible.
+RW Ver. 1.2 (8 cm)
Provides high compatibility with DVD players but does
not need to be finalized *2. Scenes can be deleted
immediately after being recorded.
*
1: Playback on all DVD players is not guaranteed. The disc must be finalized before being played back on a DVD
player.
*
2: Playback on all DVD players is not guaranteed.
English
24
EXAMPLES OF DISCS THAT CANNOT BE USED ON THIS DVD VIDEO
CAMERA/RECORDER:
• CD-RW
• CD
• CD-R
• CD-ROM
• DVD-R (4.7 GB) for Authoring Ver. 2.0
• DVD-R (double-layered)
• DVD+R
• DVD-ROM
• DVD-Video
• Discs other than those with diameter of 8 cm
AVAILABLE CARDS
SD memory card can be used on this DVD video
camera/recorder.
When using an exclusive adapter, a miniSD
memory card can be used in the same way as an
SD memory card. No multimedia card can be
used.
●Handling card
• Do not use cards other than
the designated ones.
• Be sure to perform trial
recording before recording
vital images.
• Do not touch the card
terminal or allow it to touch
metal.
• Do not paste anything other
than exclusive label on label pasting portion.
• Do not subject card to impact, bend or drop it.
• Do not disassemble card or modify it.
• Do not expose card to water.
• Do not use or store card in the following
places:
− Where the temperature is high, such as in
vehicle at high temperatures, under burning
sun or near a heater
− Where humidity is high, or in dusty place
• When the erasure prevention switch is locked,
no recording, deletion or editing will be
possible on the card: Only playback will be
possible.
COMMON CAUTIONS FOR DISC AND
CARD
• It is recommended that you create a backup
file for valuable data on hard disk of PC.
• Do not do the following, or the data on disc or
card may be damaged or lost:
− Do not remove the disc or card or turn DVD
video camera/recorder off during reading or
writing of data
− Do not use DVD video camera/recorder in a
place subject to static electricity or electrical
noise
− Do not have printing done at a print lab or
DPE service
− Do not leave a +RW disc unused in the DVD
video camera/recorder for a long time
Note:
•
This DVD video camera/recorder can play back image
data recorded on other digital cameras conforming to
the DCF (Design rule for Camera File system) standard.
The range of image data playable on this DVD video
camera/recorder is that with pixels from 80 horizontal ×
60 vertical to 4000 horizontal × 3000 vertical.
• DCF is an integrated image file format of digital
cameras: Image files can be used on all digital
devices conforming to DCF.
• Image data edited on PC and certain types of image
data may not be visible on this DVD video camera/
recorder.
• The image data recorded on another device may not
be playable on this DVD video camera/recorder.
●Note when transferring or
discarding discs and memory
cards:
“Formatting” or “deletion” using the functions
of DVD video camera/recorder or PC will
change only the file control information: It will
not completely delete the data on disc or
memory card.
When transferring or discarding a disc or
memory card, it is recommended that you
physically destroy it or use deletion exclusive
software (generally available) to completely
delete the data on it. It is user’s responsibility to
control the data on disc and memory card.
Te r mi n a l
Erasure prevention
switch
Locked status
English
25
Preparations for Power Supply
USING DVD VIDEO CAMERA/RECORDER WITH AC ADAPTER/CHARGER
It is recommended that you use the AC adapter/charger to power the DVD video camera/recorder
from household AC outlet when you perform settings on it, play back or edit images, or use it
indoors.
Note:
Be sure to use the specified AC adapter/charger (DZ-ACS3 (SW)) to power the DVD video camera/recorder. Using
other AC adapter/chargers could cause electric shock or result in fire.
1 Connect the power cable to AC adapter/
charger.
2 Plug the power cable into AC outlet.
3 Plug one end of DC power cord into the DC
output jack on AC adapter/charger.
4 Attach the other end of DC power cord to the
battery attachment platform on DVD video
camera/recorder.
Use the same procedure as that for battery
when attaching and detaching the DC power
cord: See page 27.
1
3
2
4
Mains lead
AC adapter/charger
DC power cord
To AC outlet
* The shape of plug
varies depending
on the model.
English
26
Setting Up the Battery
The DZ-BP14S battery provided with DZ-GX3300E/GX3200E or DZ-BP07PW battery provided with
DZ-GX3100E/BX37E/BX35E has not been charged at purchase time: Charge it before using the
DVD video camera/recorder.
Note:
• Be sure to use the DZ-BP14S, DZ-BP07PW (unavailable for DZ-GX3300E/GX3200E), DZ-BP14SW (optional) or
DZ-BP7SW (optional, unavailable for DZ-GX3300E/GX3200E) battery for the DVD video camera/recorder: Using
other batteries could cause the DVD video camera/recorder to malfunction, or result in fire.
• Be sure to use the DZ-ACS3 (SW) AC adapter/charger to charge the battery: Using other chargers could cause
electric shock or fire.
• Charge the battery at temperatures of 10 – 30ºC.
• If the CHARGE indicator does not light when the AC adapter/charger is plugged into AC outlet, unplug it from the
AC outlet, wait a few moments, and then plug it into the AC outlet again. If the CHARGE indicator still does not
light, the AC adapter/charger may be faulty. Unplug it from the AC outlet and consult your dealer.
• The AC adapter/charger can be used around the world. An AC plug adapter is required in some foreign countries.
If you need one, purchase it from your local electronics distributor.
CHARGING BATTERY
Use the provided AC adapter/charger to charge the battery.
1 Connect the power cable to AC adapter/
charger.
2 Plug the power cable into AC outlet.
3 Attach the battery to AC adapter/charger.
Note:
When charging a battery, unplug the DC power cord
from the DC output jack on AC adapter/charger.
AC Plug Adapter (not supplied)
AC 110 – 120V
(for DZ-GX3300E (SW), DZ-GX3200E (SW), DZ-GX3100E (SW), DZ-BX37E (SW) and DZ-BX35E (SW) only)
Mains lead
AC adapter/charger
Battery
CHARGE indicator
DC output terminal
To AC outlet
* The shape of plug
varies depending
on the model.
English
27
●Battery charged status
You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/
charger:
Note:
See “Troubleshooting” on page 138 when the CHARGE indicator blinks.
●Reference for time required to charge battery (at approx. 25ºC):
DZ-BP14S (provided with DZ-GX3300E/GX3200E)/DZ-BP14SW (optional): Approx. 165 minutes
DZ-BP07PW (provided with DZ-GX3100E/BX37E/BX35E)/DZ-BP7SW (optional, unavailable for
DZ-GX3300E/GX3200E): Approx. 90 minutes
The charge time will vary depending on the remaining power level of battery.
ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER
1 Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it downward until a click is heard.
Note:
• Make sure that the battery is in the correct orientation.
• Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall,
resulting in damage.
REMOVING BATTERY
After using the DVD video camera/recorder, remove the battery from it.
1 While holding down the BATTERY EJECT
button, slide the battery upward to remove it.
Note:
• For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.
• Be careful not to drop the removed battery.
• If the battery remains attached, minute level current
will flow even if the DVD video camera/recorder is off,
and the battery will discharge.
• Set the power switch to OFF before removing the
battery.
Charge status CHARGE indicator
During charge Lit
Charge complete Goes out
Te r mi n a l
side must be
down.
English
28
●Continuously recordable time with fully charged battery (with no zoom
operation, etc.)
See the following table as a reference for how long the DVD video camera/recorder can
continuously be used with a fully charged battery:
With DZ-BP14S (provided with DZ-GX3300E/GX3200E)/DZ-BP14SW (optional)
With DZ-BP07PW (provided with DZ-GX3100E/BX37E/BX35E)/DZ-BP7SW*
2
(optional)
The reference for how long the DVD video camera/recorder can actually be used
will be approx. 1/2 to 1/3 of the above time:
The continuously recordable time of DVD video camera/recorder in the above table shows the time
available when the DVD video camera/recorder is in the recording mode without using any other
function after recording is started. In actual recording, the battery will discharge 2 – 3 times faster
than this reference, since the REC button and zoom are being operated, and playback is performed.
Assume that the actually recordable time with a fully charged battery is between 1/2 and 1/3 of the
above time, and prepare enough batteries to allow for the time you are planning to record on the
DVD video camera/recorder.
The continuously recordable time may be less depending on the conditions when the DVD video
camera/recorder is used (if recording and recording pause are repeated at short intervals, etc.).
Note that the battery discharges faster in cold places.
Note:
• See “Troubleshooting” on page 138 when charging is not possible.
• The charge time will vary depending on the battery remaining level.
• During and after charging, and when the DVD video camera/recorder is being used, the battery will be warm, but
this does not indicate a fault.
• A battery cannot be charged while the DC power cord is connected to the DC output jack of AC adapter/charger:
Unplug the DC power cord when charging a battery.
• Charge the battery at ambient temperature 10ºC to 30ºC: Charging at temperatures other than this range could
damage the battery.
Video mode DZ-GX3300E DZ-GX3200E DZ-GX3100E
DZ-BX37E/
BX35E
XTRA
*1
When using viewfinder
approx. 105 min approx. 125 min approx. 145 min approx. 170 min
When using LCD monitor
approx. 95 min approx. 115 min approx. 130 min approx. 150 min
FINE
When using viewfinder
approx. 105 min approx. 125 min approx. 145 min approx. 170 min
When using LCD monitor
approx. 95 min approx. 115 min approx. 130 min approx. 150 min
STD
When using viewfinder
approx. 115 min approx. 140 min approx. 170 min approx. 210 min
When using LCD monitor
approx. 105 min approx. 125 min approx. 145 min approx. 170 min
Video mode DZ-GX3100E DZ-BX37E/BX35E
XTRA
*1
When using viewfinder approx. 70 min approx. 85 min
When using LCD monitor approx. 65 min approx. 75 min
FINE
When using viewfinder approx. 70 min approx. 85 min
When using LCD monitor approx. 65 min approx. 75 min
STD
When using viewfinder approx. 80 min approx. 100 min
When using LCD monitor approx. 70 min approx. 85 min
*1The time is only for reference: It will vary depending on recording contents.
*
2
Unavailable for DZ-GX3300E/GX3200E.
English
29
BATTERY REMAINING LEVEL INDICATOR
When the battery is used to power the DVD video camera/recorder, the battery remaining level
appears in the viewfinder or on the LCD screen as follows:
EFFICIENT USE OF BATTERY
• The battery will slightly discharge even if it is
detached from the DVD video camera/
recorder.
• If the battery is left attached to DVD video
camera/recorder, it will consume a slight
amount of power. Therefore, it is
recommended that you charge the battery
shortly before using the DVD video camera/
recorder, usually on the day before you plan to
use it.
When not using the DVD video camera/
recorder for an extended period:
It is recommended that you fully charge the
battery once a year, attach it to DVD video
camera/recorder and use it up; then remove the
battery and store it in a cool place again.
Battery life:
The battery life varies greatly depending on the
ambient environment and how often the DVD
video camera/recorder is used. If the usable
time of DVD video camera/recorder with a fully
charged battery is noticeably short, the battery is
probably dead: Purchase a new one.
Power save and discharge of battery:
It is recommended that you turn the DVD video
camera/recorder off in status other than
recording, since even during recording pause
battery power is consumed at the same level as
during recording.
If, when you specify Power Save On, the
recording pause status continues for
approximately 5 minutes, the DVD video
camera/recorder will automatically turn off.
To set or release power save, see “TURNING
DVD VIDEO CAMERA/RECORDER OFF
AUTOMATICALLY (POWER SAVE)” on
page 33.
Fully charged Nearly empty
White portion shows remaining level (Blinks)
English
30
Turning DVD Video Camera/Recorder On and
Off
While holding down the gray button at the right
of power switch, set the switch according to
each recording function:
Power ON status
During playback, set the power switch to “!”
or “ ” when using disc, or set it to “"” when
using card.
Turn the switch while holding down the gray
button at the right of switch.
Note:
• Once you turn the DVD video camera/recorder on to
let it recognize the disc, you can immediately record
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognize the disc again (see
“Troubleshooting” on page 138).
• It will take some time for the DVD video camera/
recorder to display the Disc Navigation screen after
power is turned on.
• When the DVD video camera/recorder is turned on,
the self-diagnosis function will work and a message
may appear. In this case, refer to “Trouble Messages”
on page 132 and take corrective action.
Set to “OFF”:
The DVD video camera/
recorder will turn off
Set to “"”:
To record still on SD
memory card
Set to “!”:
To record movie on DVDRAM/DVD-RW/DVD-R/
+RW disc
Set to “ ”:
To record still on DVDRAM disc
OFF
OFF
Power sw itch
Loading...