COLOUR MONITOR
MANUEL D’UTILISATION
BEDIENUNGSANEITUNG
MANUAL DE USUARIO
CM721FET
MANUALE DI ISTRUZIONI
READ THE INSTRUCTIONS INSIDE CAREFULLY.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
For future reference, record the s eri al number of your color monitor.
USER MANUAL
SERIAL No.
The serial number is locat ed on the rear of the monitor.
This monitor is E
computer equipped with VESA DPMS.
The E
NERGY STAR
of any product or service.
NERGY STAR
As an E
product meets the E
NERGY STAR
®
emblem does not represent EPA endors ement
®
Partner, Hitachi,Ltd. has determined that this
NERGY STAR
®
compliant when used with a
®
guidelines for energy effici ency.
Table of Content
Introduction.......................................................................2
Features
Package Overview
Cautions.......................................................................... 3
s
FCC Statement Warning................................................. 5
TCO'99 Statement...........................................................6
For the Customers in the UK ............................................8
Installation ......................................................................10
User Controls.................................................................11
OSD Function Description............................................12
OSD Icon Summary......................................................13
Specifications .................................................................14
Troubleshooting..............................................................15
Monitor
1
INTRODUCTION
Congratulations on your purchase of this high performance 19”moniter.
Using state-of-the-art electronics, this monitor can support a maximum
resolution of 1600 x 1200 . The on-screen display(OSD) allows you to
customize the display settings to suit your individual needs.
Features
☺ 19-inch monitor with a large, 366 x
274 mm viewable screen for
comfortable viewing.
☺ OSD user controls for easy and
accurate adjustment of the screen
image.
☺ Energy Star compliant to reduce
power consumption.
Package Overview
Please make sure the following items are in the shipping packing and found in
good condition:
* 19" Monitor * Power cord
* Tilt and swivel stand * This manual
Please save this packing material in case the monitor needs warranty service in the
future.
2
CAUTIONS
NEVER REMOVE THE REAR COVER !
The rear cover MUST be removed only by authorized service personnel. This colour monitor
contains high voltage components.
THE RECEPTACLE SHOULD BE CLOSE TO THE MONITOR AND EASILY ACCESSIBLE !
INSTALL THE UNIT IN A SUITABLE ENVIRONMENT !
DO NOT expose this monitor to rain or moisture to prevent electric shock or fire hazard. This unit
is designed to be used in an offi ce or business environment.
DO NOT subject the unit to vibrat i ons, dust, or corrosive gases.
KEEP IN A WELL VENTILATED PLACE !
DO NOT cover this monitor or place anything agains t any sides (not only the top, right and left
side but also the rear and bottom side ) of unit. V entilation holes are provi ded at all sides of the
rear cover to prevent the temperat ure from rising.
KEEP AWAY FROM HEAT SOURCES !
AVOID placing the unit in di rect sunshine or near a heating appliance.
BE CAREFUL OF MAGNETIC FIELDS !
DO NOT place a magnet, loudspeaker system, floppy disk drive, printer, or anything which will
generate magnetism near the unit. A magnetic fiel d m ay caus e blurred c olours or di st orti on of t he
displayed pattern.
BE CAREFUL OF GENERATED MAGNETISM !
After the power has been turned on or “DEGAUSS” button has been pressed, the CRT is
demagnetized for approximately 10 seconds. This generates a strong magnetic field around the
front cover which may affec t the data stored on magnetic tape or disks near the front cover. Place
such magnetic recordi ng equi pment and tapes/disks away from this unit.
AMBIENT ILLUMI NATION
Avoid direct rays of the sun or room lighting onto the CRT screen in order to prevent eye fatigue.
THE ENCLOSED POWER CORD MUST BE US E D !
In Europe, a proper European standard approved power cord is to be used with this monitor. For
a rated current up to 6 A, a type not li ghter than H05VV-F 3G 0.75 m m
2
must be used.
mm
In USA/Canada, use a UL LISTED/CSA LABELLED or CERTIFIED power cord set meeting the
following specifications
Rating: min. 125V, 7A
Length: max. 3.0m
Type: SVT or SJT
Plug type: NEMA 5-15P figure, Paral l el bl ade, Grounding type
Failure to do so may cause fire or electric shock hazard.
USE ONLY THE CORRECT VOLTAGE POWER OUTLET WI TH SAFETY GROUND
CONNECTION !
100 - 120 V for USA, Canada, etc.
200 - 240 V for Europe, etc.
(This monitor will automatically adjust t o the input voltage 100 - 120 / 200 - 240V.)
2
or H05VVH2-F 3G 0.75
3
CAUTION for 200 - 240V operation only
This equipment relies on the protective devices in the building installation for short-circuit and
over-current protection. Refer to the following table for t he suitable number and location of the
protective devices which shoul d be provi ded i n the building installation.
protective devices in single - phase equipment or sub - assemblies
Protection
Case A: Equipment t o be
connected to POWER SYSTEMS
with earthed neutral reliably
identified, ex cept fo r Case C below.
Case B: Equipment t o be
connected to any supply, including
IT POWER SYSTEMS and
supplies with reversible plugs,
except for Case C below.
Case C: Equipment to be
connected to 3-wire power
systems with earthed neutral
reliably identified.
Verify that the protecti ve devi ces in the building installat i on meets the conditions i n t he table prior
to installing the equipment.
BE CAREFUL OF POWER CORD CONNECTION !
Before inserting the plug of t he power cord into a recept acle of t he correct voltage, c heck that the
connection portion of the power cord is clean (with no dust ). Then, insert the pl ug of power cord
to a receptacle firm l y, otherwise it may cause elect ri cal shock or fire.
REMOVE THE POWER CORD FOR COMPLETE SEPARATION !
For complete separation from the power source, remove t he power cord from the m onitor or from
the wall outlet.
AVOID FREQUENT POWER ON-OFF SWITCHING !
DO NOT repeat OFF and ON in a short period. It may caus e blurred colours or distort ion of the
displayed pattern.
BE CAREFUL OF STATIC ELECTRICITY ON CRT SURFACE !
To prevent electrical shoc k by t he st atic elec tric it y on the CRT s urfac e, di sc onnect the power c ord
at least 30 SECONDS AFTER t urni ng of f the power.
ABOUT CLEANING
This monitor has a non-glare and anti -el ectrostatic treatm ent on the surface of the screen. Use
water or alcoholic solvent with soft cloth like gauze to clean the s urface of the screen.
NEVER use abrasive, glass cleaner containing highly concentrated ammonia and strong base
chemicals si nce they damage the surface treatment.
Clean the cabinet and controls with a l i ghtly moistened soft cl oth.
DO NOT use aerosol sprays, solvent s or abrasive cleaners.
Informative examples of
against
Earth faults
Overcurrent
Earth faults
Overcurrent
Earth faults
Overcurrent
Minimum number of
fuses or circuit -
breaker poles
Location
1
1
2
1
2
2
Phase conductor
Either of the two
conductors
Both conductors
Either of the two
conductors
Each phase conductor
Each phase conductor
4
CAUTIONS (Continued)
FCC Statement Warning
WARNING : This equipment has been tested and found to comply with the lim its for a Clas s B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harm ful interference in a residential inst allation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installat ion. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving ant enna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that t o which the receiver is
connected.
- Consult the dealer or an experienced radio / TV tec hni cian for help.
INSTRUCTIONS TO USERS : This equipment complies with the requirements of FCC (Federal
Communication Commission) equipments provided that following conditions are met.
(1) Power cord: Unshielded power cord must be used.
(2) ceed the specified level.
CAUTION : Changes or modifications not express l y approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
We: HITACHI America, Ltd.
Located at: 2000 Sierra Point Parkway, Brisbane, CA 94005-1835 U.S.A.
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC
rules as a Class B digital device. Each product marketed, i s identical to the representative unit tested and found
to be compliant with the standards.. Records maintained continue to reflect the equipment being produced can be
expected to be within the variation accepted, due to quantity production and testing on a statistical basis as
required by 47FCR § 2.909. Operation is subject to the following two conditions: (1) Thi s device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may
cause undesired operation. The above named party is responsible for ensuring that the equipment compli es with
the standards of 47CFR §§ 15.101 to 15.109.
Trade name: Color Monitor
Model Number: CM721F
Signature of Party Responsible:
Printed name of Party Responsible: Hideaki Kusaba
Executed on (Date), at (Place): May 18, 2001, CA, U.S.A.
Declaration of Conformity
According to 47CFR, Part 2 and 15 for
Class B Personal Computers and
Peripherals; and / or
CPU Boards and Power Supplies used
With Class B Personal Computers:
5
Loading...