Hitachi CECH-ZRC1E User Manual

Blu-ray Disc™ Remote Control

Instruction Manual

CECH-ZRC1E

DEVICES buttons

Colour buttons

Precautions

ˎ Before using this product, carefully read this manual and retain it for future reference. Read also the

instructions for the PlayStation

Battery use

ˎ Do not handle damaged or leaking batteries.
ˎ Never throw batteries into a fire.
ˎ If you come into contact with material from a leaking battery, take the following actions:

ˋ If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek

medical attention.

ˋ If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean

water. Consult your physician if inflammation or soreness develops.

ˎ Keep the product out of the reach of small children. Small children may swallow the batteries or small parts,

which may inflict injury or cause an accident.

ˎ Do not use batteries other than those specified, and always replace with the same type of battery. Do not mix

old and new batteries.

ˎ Insert batteries with the plus and minus ends in the correct direction.
ˎ Remove batteries when they have reached the end of their life, or if the BD remote control is to be stored for

an extended period of time.

Use and handling

ˎ Do not expose the BD remote control to high temperatures, high humidity or direct sunlight.
ˎ Do not allow liquid or small particles to get into the product.
ˎ Do not put heavy objects on the product.
ˎ Never disassemble or modify the product.
ˎ Do not throw or drop the product, or otherwise expose it to strong physical impact.
ˎ Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
ˎ When cleaning the product, use a soft, dry cloth. Do not use solvents or other chemicals.

3 system.

®

What you can do with the BD remote control

ˎ The BD remote control uses Bluetooth

to control the playback of common types of disc media, including Blu-ray Disc™ (BD) media.

ˎ You can also control the playback of streaming media and control the playback of content

downloaded to the PS3™ system HDD.

ˎ Infrared (IR) technology enables you to operate peripheral devices such as your television

and AV amplifier*. For IR operation you must point the IR transmitter of the BD remote
control directly at the device. Check that there are no obstructions between the BD remote
control and the device.

wireless technology to operate your PS3™ system and

®

Operating the PS3™ system

Check the PS3™ system software version

To use the BD remote control, the PS3™ system software must be version 3.60 or later. You can
check the system software version by selecting
[System Information] on the XMB

(XrossMediaBar) menu of the PS3™ system.

™

(Settings) (System Settings)

Registering (pairing) the BD remote control with a PS3™ system

This operation is performed only once, when you are using the BD remote control for the first
time.

1 Turn on the PS3™ system.
2 From the PS3™ system’s XMB

Settings)

[Register BD Remote Control], and then press the button.

menu, select (Settings) (Accessory

™

3 Follow the on-screen instructions to register the BD remote control.

Hints

ˎ For the latest usage instructions, refer to the user’s guide for the PS3™ system

(eu.playstation.com/manuals).

ˎ Only one BD remote control can be registered with a PS3™ system at a time.
ˎ When you pair the BD remote control with another PS3™ system, registration with the

original PS3™ system is cleared. To use the BD remote control with the original PS3™ system,
you will have to pair the devices again.

How to use the BD remote control

DEVICES buttons

Switch between devices.

PS3 system button Switch the BD remote control to operate the PS3™ system.

AMP button Switch the BD remote control to operate an AV amplifier.

TV button Switch the BD remote control to operate a TV.

Buttons for operating a PS3™ system, a TV or an AV amplifier

The meaning of the icons shown in the table below is as follows.

Used to operate the PS3™ system.

Used to operate the TV.

Used to operate the AV amplifier.

PlayStation®3 system Television AV amplifier

Bluetooth
wireless
communication

* Only the surround sound system (CECH-ZVS1A / CECH-ZVS1B / CECH-ZVS1E) (sold separately) and AV

amplifiers made by Sony Corporation can be used.

®

BD remote control

IR (infrared)
communication

IR transmitter

Preparing for use

Remove the battery cover on the rear of the BD remote control and insert the supplied
batteries. Set the batteries in the correct position.

INPUT button*



/  AMP button



/  TV button

3D button

Number buttons
ˎ/CLEAR button

TIME button

-/- - button

AUDIO button

SUBTITLE button

ANGLE button

DISPLAY button

TOP MENU button

Switch the video inputs in TVs and the audio inputs

in AV amplifiers.

Turn the AV amplifier on and off.

Turn the TV on and off.

Switch between 2D and 3D mode on the TV.

Operation will differ depending on the TV.

Enter numbers.

Clear numbers that have been entered.
Enter the decimal point for a digital broadcast subchannel.

View the elapsed time or remaining time of a title or chapter.
Confirm the channel number that has been entered.

Enter channels of 2 digits or greater.

Change audio.

Switch subtitle languages.

Change viewing angles on BDs with multiple angles

recorded for the same scene.

Switch to view in wide mode.

Display the status of and information about the

content being played.

Change the display window settings.

Display the menu.