HIT HD74LV74A Datasheet
HD74LV74A
Dual D–type Flip Flops with Preset and Clear
ADE-205-244 (Z)
1st Edition
March 1999
Description
The HD74LV74A has independent data, preset, clear, and clock inputs Q and Q outputs in a 14 pin
package. The input data is transferred to the output at the rising edge of clock pulse CLK. Low-voltage
and high-speed operation is suitable for the battery-powered products (e.g., notebook computers), and the
low-power consumption extends the battery life.
Features
• VCC = 2.0 V to 5.5 V operation
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
• All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C)
• Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
HD74LV74A
(
)
Function Table
Inputs Outputs
PRE CLR CLK D Q Q
LHXXHL
HLXXLH
LLXXH*1H*
HH↑ HHL
HH↑ LLH
HH↓ XQ
0
Note: H: High level
L: Low level
X: Immaterial
↑: Low to high transition
↓: High to low transition
Q
:The level of Q immediately before the input conditions shown in the above table are determined.
0
1.: Q and Q will remain HIGH as long as Preset and Clear are Low, but Q and Q are unpredictable,
if Preset and Clear go HIGH simultaneously.
1
Q
0
Pin Arrangement
1CLR
1D
1CLK
1PRE
1Q
1Q
GND
1
2
3
4
5
6
7
14
13
12
11
10
9
8
V
CC
2CLR
2D
2CLK
2PRE
2Q
2Q
Top view
2
HD74LV74A
Absolute Maximum Ratings
Item Symbol Ratings Unit Conditions
Supply voltage range V
Input voltage range*
Output voltage range*
1
1, 2
Input clamp current I
Output clamp current I
Continuous output current I
Continuous current through
V
or GND
CC
Maximum power dissipation
at Ta = 25°C (in still air)*
3
CC
V
I
V
O
IK
OK
O
or I
I
CC
GND
P
T
Storage temperature Tstg –65 to 150 °C
Notes: The absolute maximum ratings are values which must not individually be exceeded, and furthermore,
no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
–0.5 to 7.0 V
–0.5 to 7.0 V
–0.5 to VCC + 0.5 V Output: H or L
–0.5 to 7.0 VCC: OFF
–20 mA VI < 0
±50 mA VO < 0 or VO > V
±25 mA VO = 0 to V
CC
±50 mA
785 mW SOP
500 TSSOP
CC
3
HD74LV74A
Recommended Operating Conditions
Item Symbol Min Max Unit Conditions
Supply voltage range V
Input voltage range V
Output voltage range V
Output current I
CC
I
O
OH
I
OL
Input transition rise or fall rate ∆t /∆v 0 200 ns/V VCC = 2.3 to 2.7 V
Operating free-air temperature Ta –40 85 °C
Note: Unused or floating inputs must be held high or low.
2.0 5.5 V
0 5.5 V
0VCCV
— –50 µAV
—–2 mAV
—–6 V
= 2.0 V
CC
= 2.3 to 2.7 V
CC
= 3.0 to 3.6 V
CC
— –12 VCC = 4.5 to 5.5 V
—50 µAV
= 2.0 V
CC
— 2 mA VCC = 2.3 to 2.7 V
—6 V
—12 V
= 3.0 to 3.6 V
CC
= 4.5 to 5.5 V
CC
0 100 VCC = 3.0 to 3.6 V
020 V
= 4.5 to 5.5 V
CC
4
Logic Diagram
PRE
HD74LV74A
CLK
CLR
C
C
C
D
TG
C
C
TG
C
C
TG
C
Q
C
TG
Q
C
5
Loading...