HD74HC564/HD74HC574
Octal D-type Flip-Flops (with 3-state outputs)
Description
These devices are positive edge triggered flip-flops. The difference between HD74HC564 and
HD74HC574 is only that the former has inverting outputs and the latter has noninvertering outputs.
Data at the D inputs, meeting the set-up and hold time requirements, are transferred to the Q or Q outputs
on positive going transitions of the clock (CK) input. when a high logic level is applied to the output cotrol
(OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other
inputs and the state of the storage elements.
Features
• High Speed Operation: tpd (Clock to Output) = 13 ns typ (CL = 50 pF)
• High Output Current: Fanout of 15 LSTTL Loads
• Wide Operating Voltage: VCC = 2 to 6 V
• Low Input Current: 1 µA max
• Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)
Function Table
Outputs
Output Control Clock Data HD74HC564 HD74HD574
L HL H
L LHL
LL XQ
HX XZZ
Q
: level of Q before the indicated Steady-sate input conditions were established.
0
Q
: complement of Q0 or level of Q before the indicated Steady-state input Conditions were established.
0
0
Q
0
HD74HC574
HD74HC564/HD74HC574
Output
Control
1D
2D
3D
4D
5D
6D
7D
8D
GND
1
2
3
4
5
6
7
8
9
10
OE
DQ
OE
DQ
OE
DQ
OE
DQ
Top view
OE
DQ
OE
DQ
OE
DQ
OE
DQ
20
19
18
17
16
15
14
13
12
11
V
CC
1Q
2Q
3Q
4Q
5Q
6Q
7Q
8Q
Clock
Absolute Maximum Ratings
Item Symbol Rating Unit
Supply voltage range V
Input voltage V
Output voltage V
Output current I
DC current drain per VCC , GND ICC, I
DC input diode current I
DC output diode current I
Power Dissipation per package P
CC
IN
OUT
OUT
GND
IK
OK
T
Storage temperature Tstg –65 to +150 °C
–0.5 to +7.0 V
–0.5 to VCC + 0.5 V
–0.5 to VCC + 0.5 V
±35 mA
±75 mA
±20 mA
±20 mA
500 mW
3