HiSonus livOn HSP-M1 User Manual

Mobile Streaming Player

Users Manual

HSP-M1

Thank you for purchasing a HiSonus product.

livOn™ is a registered trademark of HiSonus Inc. HiSonus Inc. owns all the rights of the trademark, literary property and intellectual property related to this manual. Any unauthorized reproduction and distribution of its contents, whether in part or in its entirely, is strictly prohibited.

The descriptions, examples, images and specification of product contained in this manual are subject to change without prior notice to improve features or performance of product.

This Users Manual includes users’ guide, safety instructions, warranty policy and technical support. Before using the product, please read this Users Manual thoroughly to enjoy full functions and performance of it. This Users Manual can be downloaded from HiSonus web-site (www.hisonus.com)

Contents

livOn Player is …

Getting Started

Components

Name of Parts

Charging the Battery

Inserting MicroSD Card

Connecting to PC

Status LED

Product Introduction

Connection Mode

Installing livOn Controller Program

Primary Setup

Using the Player

Start

Setup

Registering Channel

Playing Music Files and Playlist

Management

Upgrading Firmware

Initializing Device

Additional

Setup Music File Server

Setup Personal Hotspot

Specifications

Troubleshooting and Precautions

Troubleshooting

Precautions

livOn Player is …

livOn™ Player HSP-M1 is a mobile HD music streaming player enabling you to enjoy state-of-the-art music sound anywhere, anytime from the music source server through mobile wireless data network (3G/4G LTE) or Wi-Fi environment.

livOn™ Player HSP-M1 offers not only MP3 quality but also the super sound(24bit, 192㎑) far exceeding the CD quality.

livOn™ Player HSP-M1 provides user-friendly interface including useful functions controlled via various kinds of smart device.

 HSP-M1 is a model name of mobile streaming player out of HiSonus’ livOn player product series.

Components

livOn Player USB Cable AC Adapter

Quick Guide

 Components are subject to change without prior notice and may vary from images shown.

Getting Started

Name of Parts

Earphone Jack

Volume+

Volume-

Play/Pause

Power

Reset

USB Jack

Adapter Jack

MicroSD Card Slot

Status LED

Power ON/OFF : Press and hold to turn the player on or off till the Status LED is on or off. Reset : Insert paper clip into Reset hole and press the button in case of a device malfunction. Play/Pause : While playing music file, press Play/Pause button to pause or resume. Play next music file : Press Play/Pause button and Volume- button simultaneously. Play previous music file : Press Play/Pause button and Volume+ button simultaneously.

Getting Started

Charging the Battery Connecting to PC

Inserting MicroSD Card Status LED

1. The built-in battery can be charged by AC adapter or USB cable.

2. Charging by AC adapter is faster than charging by USB cable.

3. For the first time or when the player has not been used for a long time, please fully charge the battery before use.

4. Using unapproved AC adapter by HiSonus can cause

problem.

1. Settings for initial working environment, upgrading and device initialization should be done by connecting the livOn player to PC via USB cable.

2. Please connect livOn player to PC after the boot-up procedure is completed. This will allow the PC to recognize livOn player properly.

3. Please refer to related sections in this manual to

setup and manage livOn player by using USB

connection with PC.

1. MicroSD card insertion is required to store music files to livOn player.

2. When replacing the MicroSD card, please turn off the player’s power before removing the card.

3. MicroSD card is not included in product package.

4. Please refer to “Playing Music Files” section in this manual to play music files in MicroSD card.

* The maximum capacity of MicroSD card supported by livOn player is 32GB.

Categories

Status LED Remark

Power Off

AC adapter connected Charging Fully charged

Blue Blinking non

-blinking

Booting

Boot

progressing

White

Working

Mode

Hotspot Mode Wi

-Fi Mode

Mode

Recovery

Mode

Green Violet Yellow Cyan

Blinking

Connecting…

Special Mode

Battery

Insufficient Battery

Red,

blinking

Getting Started

Product Introduction

1. livOn player can play the music files stored in not only MicroSD card but also remote servers such as networked PC or personal NAS storage.

2. Please refer to “Registering Channel” section in this

manual to register the music file server as a channel.

3. livOn player is controlled by Controller program(for setting up configurations, selection and playing music files) installed in PC or various smart devices.*

4. Please refer to related sections for installation or how to use Controller program.

* Smart devices : Smartphone, Pad or Tablet based on iOS or Android O/S

Internet

Mobile Data Network

PC Server NAS

Getting Started

Connection Mode

1. The Wi-Fi connection between livOn Player and smartphone or PC with livOn Controller program can be made by one of below three modes.

①When playing only the music files stored in MicroSD card

▶ Select “livOn Player AP mode”

②When music files are stored in remote file server*

connected to Internet, and playing it where Wi-Fi is available such as home, office or public places

▶ Select “Wi-Fi mode”

③When the music files are stored in remote file server*,

and playing it on the road while moving ▶ Select “Hotspot mode”

2. Each connection mode is made via built-in Wi-Fi of livOn Player. SSID, password and security method are

necessary to configure each mode.

Getting Started

3. The music files stored in MicroSD card can be played in any kind of connection mode.

4. One of the three connection modes can be set or all three modes can be set to switch as required

5. Please refer to the next page for the basic concept of

each connection mode. Also refer to “Primary Setup” and “Setup” sections in this manual for how to

configure parameters for each mode.

* Music file server : PC or NAS storage server where music files are stored and connected to Internet.

Connection

Mode

SD Card

Remote

Server

Mobility

Required

Bandwidth

Hotspot

Mode

O O O

Middle

Wi-Fi

Mode

O O X High

Player AP

Mode

O X - -

Connection Mode

1. Hotspot Mode

 Smartphone is usually working as Wi-Fi client to access

Internet via AP(Access Point) in Wi-Fi zone.

 Meanwhile, smartphone has “Personal Hotspot”

function which makes smartphone work as AP and allows other Wi-Fi enabled devices to access Internet via mobile data network (3G/4G LTE).

 In “Hotspot Mode”, livOn Player tries to connect to

smartphone with pre-configured SSID(Wi-Fi name) and

password.

 Once the connection is made with smartphone, user

can play music files in remote server on the road while moving by controlling livOn Player with smartphone.

2.Wi-Fi Mode (recommended)

 In Wi-Fi zone such as home, office or cafe, smartphone

and livOn Player can connect to the same AP to access remote server and control livOn Player.

Getting Started

Sometimes the Wi-Fi control connection between smartphone and livOn Player is lost when user select invalid Wi-Fi information or get out of Wi-Fi zone. Because livOn Player doesn’t have LCD display, user

cannot control livOn Player in this situation. In this emergency, livOn Player can be forced to enter “AP Mode” by pressing Volume+ and Volume- buttons simultaneously,(LED will change to yellow). Then user can

search and connect to livOn Player with smartphone to select proper mode and Wi-Fi information.

 In this mode, the PC that is connected to the same Wi-

Fi can control livOn Player.

 In “Wi-Fi Mode,” livOn Player tries to connect to AP

with pre-configured SSID(Wi-Fi name) and password.

 Up to 8 Wi-Fi APs’ information can be registered in

livOn Player for you to select depending on where you

are.

3.livOn Player AP Mode

 livOn Player is working as Wi-Fi AP in this mode.  User can search the pre-configured SSID(Wi-Fi name) of

livOn Player and connect it to control livOn Player.

 If Wi-Fi connection between livOn Player and

smartphone is lost(user’s mistake or when user is out of

Wi-Fi zone), please refer to the below for recovery.

Internet

Remote Server

3G/4G LTE

Concept of

Connection Mode

Hotspot Mode

Wi-Fi Mode

Player AP Mode

Getting Started

Installing livOn Controller Program

1. Three types of livOn Controller Program are provided, as for PC, iOS based smart devices(smartphone, pad) and Android based smart devices.

2. livOn Controller app for smart devices provides

simple and easy user interface suitable for hand-held devices.

3. In case of multi-touch operation such as adding music files to playlist, the livOn Controller Program for PC is easier than app for smartphone because of

bigger screen and mouse.

4. Items below should be done on PC with USB connection between PC and livOn Player.

 The Primary Setup  Firmware Upgrade  Device Initialization(Factory Default)  Setting Password of livOn Player

Getting Started

5. The livOn Controller app for smartphone is most commonly used to control livOn Player for playing music files.

6. The Controller app for smart devices support below O/S platform.

 iOS (iPhone/iPad series) : iOS 5.x.x or later  Android : 2.3 Gingerbread or later

7. Installing iPhone/iPad app

 Please find “livOn” at App Store and install it.

8. Installing Android app

 Please find “livOn” at Play Store and install it.

 It can be downloaded from HiSonus website.

 URL for download :

http://www.hisonus.com/support/download.html

Installing livOn Controller Program

1. The livOn USB driver and Controller Program for PC is compatible with Windows XP or Windows 7 and the installation packages can be downloaded from HiSonus website*.

2. Please install USB driver for livOn Player first.

① Unzip the downloaded USB driver package to any

folder in your PC.

② Turn on the livOn Player. Don’t connect USB cable

yet.

③ Connect USB cable after completion of booting

process. (LED is changed from white to other color.)

④ When the message window “New hardware…” is

displayed, run the proper USB driver install program according to OS type.

⑤ For Windows7, run the program with “Run As

Administrator” by pressing right button of mouse.

⑥ The “New hardware…” message window will be

closed after completion of installing USB driver.

 When the Player is connected to other USB port of PC, the

USB driver should be installed again.

Getting Started

3. After completion of USB driver installation, run the install program of livOn Controller Program for PC.

4. When the install procedure is completed, the message window of completion is displayed.

 URL for download : http://www.hisonus.com/support/download.html

Installing USB driver

Installing Controller Program for PC

Installing livOn Controller Program

Getting Started

1. Please double click “livOn Controller” icon on screen to run it and it first displays the window for “Primary Setup” described on next page.

2. In order to use livOn Player properly, the connection mode and other settings should be done during “Primary Setup” procedure.

3. Even though the USB cable is properly connected and USB driver installation is completed without error, if

the “Primary Setup” window is not displayed and USB

connection status is “Disconnect” on right-upper side

of display as seen on right picture, Windows firewall blocks the USB connection in most cases.

4. In this case, change the settings of firewall to allow livOn Program in the firewall setting menu of

“Security Center”(Windows XP) or “System and

Security”(Window 7) of Control Panel. Then run livOn

Controller Program again.

5. The configured parameters set during “Primary Setup”

procedure can be changed in the menu “Setup” while

controlling by smartphone or PC via Wi-Fi connection.

1. First of all, the connection mode should be set after installing Controller Program to use livOn Player.

2. Turn on the livOn Player, and then connect livOn Player to PC by using USB cable after completion of booting process. (LED is changed from white to other color) Please keep this sequence to prevent possible error.

3. Run livOn Controller Program on PC. The three steps of “Primary Setup” wizard is displayed.

4. The “Primary Setup” wizard is prepared to enter the parameters for three connection modes. Please refer to

“Connection Mode” section in this manual for understanding each mode.

5. Unnecessary step, connection mode, can be skipped, but at least one of them should be set with real parameters for using livOn Player.

Step 1.

This step is for entering parameters for “Hotspot Mode” of livOn Player.

Please enter the SSID(Wi-Fi hotspot name), password

and security method in the settings of “Personal Hotspot” mode of your smartphone.

Please refer to “Setup Personal Hotspot” section for how to make your smartphone a “Personal Hotspot”.

If you do not need this mode, just skip.

Primary Setup

Step 2.

This step is for entering parameters for “Wi-Fi Mode” of

livOn Player. Please enter the information of Wi-Fi AP

frequently connected at home or office.

Up to 8 APs can be registered but please enter just one AP’s information for using at this stage.

If you do not need this mode, just skip.

Step 3.

This step is for entering parameters for “livOn Player AP

Mode” of livOn Player. It already has default value, but

please enter your own ID and password(over 8 digits) for privacy.

This mode is very useful in emergency when the Wi-Fi control connection is lost. So please do not skip and remember the parameters.

Primary Setup

1. The main window of livOn Controller Program is displayed after 3 steps of “Primary Setup” as below.

2. Select connection mode : Please select one mode that you will use for controlling livOn Player on the menu of “Manage Network Connection” > “Switch Network” in the left-upper side menu-bar.

3. Enter password : Enter password that is used for connecting to livOn Player. When you forget it, it can be reset

by Controller Program on PC with USB connection between PC and livOn Player.

4. The serial number*(12 digits) of product is displayed on left-lower side of this windows. Please note this number and disconnect USB cable after select “USB Safely Remove” in left-upper side menu-bar.

5. Finally, restart the livOn Player. The livOn Player is ready for use.

Serial Number

• The serial number can also be found on the label stuck on product or box.

Primary Setup

Start

1. In order to play music files and control the player by smartphone, the Wi-Fi connection between smartphone and livOn Player should be made first, and then execute livOn Controller app.

2. In case of controlling by PC, the USB connection can be used instead of Wi-Fi or wired-Ethernet connection. (surely, Hotspot mode cannot be used.)

3. The connection progress of livOn Player is described below, and refer to “Connection Mode” section in this

manual for understanding more in detail about each connection mode.

Using the Player

Hotspot

mode(LED Green)

Activate “Personal Hotspot” in smartphone.

(refer to “Setup Personal Hotspot” section)

The blinking of LED is stopped when the connection is

successfully made.

If the blinking is not stopped after a while,

please re

-configure Player with correct

SSID and password of your smartphone’s

personal hotspot and try again. Below is for how to check current setup.

-Fi mode(LED Violet)

The blinking of LED is stopped when the connection is

successfully made. If the blinking is not stopped after a while, please change Wi-Fi configuration to valid one or select another Wi

-Fi and try again.

Your smartphone should be connected to

the same Wi

-Fi AP.

Below is for how to check current setup.

livOn

Player AP mode(LED Yellow)

The LED is not blinking in Player AP mode.

Search and select the SSID of livOn Player in

your smartphone’s available Wi

-Fi lists.

the SSID of livOn Player is not found,

please check the configuration of livOn

Player.

Below is for how to check current setup.

Tip for checking or changing current setup

when the Wi-Fi connection fails !

Connect PC and Player with USB cable, or force the Player to enter AP mode

as below and connect with smartphone.

Press

Volume+ and Volume- buttons simultaneously till the LED is changed to yellow. Connect to Player with your smartphone and

change the setup. After finishing, please re

-select original connection mode that you had setup. (refer to “Setup” section in this

manual.)

Start

1. Run livOn Controller app in your smartphone after the Wi-Fi connection of livOn Player is properly completed with your smartphone as described in previous page.

2. The Controller app displays the list of numbers of available livOn Players. Please select your livOn Player that is

noted in “Primary Setup” process. Once the connection between Player and Controller is successfully made,

Controller app remember the number and doesn’t display this selection screen again.

3. Please enter password that you set in “Primary Setup”. The Controller will remember this password, so this will not appear again. But when the app is re-installed or selecting other Player, it will appear again.

4. The rightmost picture is the screen of connection confirmation, then press “Start” to control livOn Player and enjoy music.

Using the Player

Start

1. The main screens of livOn Controller app for smartphone and program for PC are showed as below.

2. The screens formation of smartphone, Pad/Tab and PC varies, but they basically have the same functions. This manual describes the functions and shows example pictures based on Controller app for smartphone.

Setup

Current Playing

Functions

Menu bar

Connection

Status

App for smartphone

Program for PC

Using the Player

Setup

1. “Setup” screen shows the information of livOn Controller and Player, or you can change the overall settings.

2. Please check and confirm again

before you change the settings as the playing quality may vary and network connection can be lost by invalid settings.

You can change livOn Player’s

connection mode in this menu.

When you set “Wi-Fi Mode”, you can select one out of registered

Wi-Fi AP lists which is available in

current place.

Please refer to “Connection Mode”

section in this manual for more in detail about each mode.

You can add or change the settings of connection modes of livOn Player.

In case of “Hotspot Mode”

and “Wi-Fi Mode”, you can

enter Wi-Fi information or select one AP out of the search result by pressing “Modify” for new registration.

Up to 8 Wi-Fi APs can be registered in “Wi-Fi Mode”, and you can select one of them according to current location.

In case of “livOn Player AP Mode”, SSID should have

unique name and the password should be 8 digits or more.

Using the Player

①Manage Network Connection > Switch Network

②Manage Network Connection > Network Properties

Setup

③ETC

 File Type, File Size

It designates file types or limits its size which are added to channel from music file server.

The default value is “no limitation”, so not

recommended to change except for a special occasion.

 Impedance matching headset

It tunes maximum volume level in accordance with

headset or earphone. When the maximum volume is too high, select lower one.

 Media Scan

It re-scans music files of all channels. Scanning may take long time depending on the number of files in each channel.

 Online Store

The URL of playlist file(.pls) can be entered in this

space to play the listed music files.

It can be often used for Internet radio of streaming music service.

Using the Player

Registering Channel

1. livOn manages the storage device or music file server as a “Channel”.

2. There are three kinds of channel as below. When MicroSD card is detected, “SD Card” is activated.

3. PC server or NAS storage that is connected to

network(Internet) are registered as a “Remote Server”

to play music files in it.

4. Please refer to “Setup Music File Server” section in this manual for settings of these servers.

Play List URL

MicroSD Card

Remote Server

Manage Channel

When the server is located in local

network, it can be registered with FTP or Samba protocol, but if it is over the Internet, FTP is used.

In case of FTP channel, server’s IP

address(or URL), logon ID and

password are needed and the port number is generally 21, unless assigning other number in server.

In case of Samba, the “share name”

in the server is also necessary.

Within a certain time (according to

number of files in server) after channel is registered normally, the files are listed in the channel.

“Folder View” or “List View” can be

selected for each channel.

Using the Player

When the files are not listed, please re-scan files by

selecting “Media Scan” in the “Setup” menu. When the files

are still not listed after re-scanning, please check whether the registered information of channel is valid or not.

Playing Music Files and Playlist

Below is the main screen of playing music file.

Current Playlist

Previous Screen

Album/Lyric Info.

Retrieve

Album/Lyric info.

Play Control

Music File Info.

The playlist is newly added or modified in the “Playlist”

menu. And music files from a channel can be added to or removed from the selected playlist.

• Adding or removing music files to or from playlist needs many repeated touch-operation and takes long time in smartphone. So it is highly recommended to do it with Controller Program on PC.

Using the Player

Management

Initialing Device

1. “Device Initialize” restores all the settings of livOn Player to factory default value, and it means all the settings will be erased.

2. After initialization, please connect livOn Player to PC with USB cable and set up all configurations again from “Primary Setup” in order to use properly.

3. “Device Initialize” is not recommended except for

special case like transferring device to other person.

Upgrading Firmware

The latest firmware is searched automatically, and

performs only under USB connection with PC. The upgraded firmware is applied from next power-on booting.

Device management like upgrading or initializing device is performed only in livOn Controller Program on PC.

Additional

Setup Music File Server

1. Samba Server

① If the PC server and livOn Player are located in the

same local network(for example, home network), the Samba protocol can be used to share files.

② The setup method of Samba varies on devices, so

please refer to the manual of it.

③ In case of PC with Windows O/S, it can be activated

easily by setting “Share” of a directory in Windows

Explorer. livOn Player can connect to it with Samba protocol to play music files.

④ IP address of server, logon ID, password and share-

name of the directory are necessary to register livOn Player as a “Channel”.

2. FTP Server

① If the server is located in remote site connected

through Internet, the FTP protocol should be used.

② In case of PC, download the free FTP server

program from Internet and install it to PC. Then run it and set the directory of music files, logon ID

and password.

③ In case of NAS storage or others, configure FTP

server according to the guide in its users manual.

④ In most cases, the server is at home and connected

to Internet via private router, so DDNS(Dynamic Domain Name Service) or similar one should be introduced to access it from remote site.

⑤ Please refer to next page to set DDNS service, and

keep the hostname(URL), registered in DDNS, logon

ID and password of FTP server to register “Channel”

of livOn Player.

DDNS(Dynamic Domain Name Service)

In most cases at home, ISP(Internet Service Provider) allocates “dynamically” public IP address to home router. It means the public IP address of router can not be predicted. So in order to connect the server at home from outside through Internet, the dynamic updating IP address of “Domain Name”(URL) with valid IP address is necessary. The most popular service for this purpose is DDNS, and many companies provide this service for free or at a cost.

Additional

Setup Personal Hotspot

1. In case of iPhone (based on iOS 5.x.x)

① Settings > Personal Hotspot ② Turn on the status of [Personal Hotspot] ③ Enter Network ID and Password. (Initially)

④ Keep the Network ID and Password

2. In case of Android smartphone (based on 4.x.x ICS)

① Settings > Wi-Fi Network > [Tethering/Personal

Hotspot]

② Turn on the status of [Personal Wi-Fi Hotspot] ③ Enter Network ID and Password. (Initially)

④ Keep the Network ID and Password

• The network ID(SSID) and password of personal hotspot can be set any character string you desire.

3. DDNS(Dynamic Domain Name Service) Settings ① DDNS service is sometimes provided by the

supplier of private router for free, but most

commercial services (such as dyndns) are not free. So please browse Internet to choose which service to use.

② When you subscribe DDNS service, you will enter

hostname(URL, for example, mymusic.dyndns.org), username, password and current public IP address.

Current public IP address is displayed on screen.

③ After subscription, connect to private router and

enter the parameters in the DDNS section of router. Please refer to the manual about how to connect and set the parameters.

④ Then, server’s private IP address should be set with

“port-forwarding” function of router to make router

relay external FTP connection to internal server. Please set port-forwarding with FTP port number(21)

with server’s private IP address.

⑤ All the configuration of private router, including

how to find server’s private IP address, please refer

to its user manual, and set the parameters step-by-

step.

Additional

Specifications

Troubleshooting and Precautions

Troubleshooting

 The device cannot be turned on, or LED is not

changed from white to other color after turning on.

• Please try again after charging battery.

• Please try again after press “Reset” button in “Reset” hole

with paper clip.

• If the problem persists, try to boot with “Recovery Mode”

by pressing Volume+ and power button simultaneously. (LED is cyan) If successful, connect device to PC with USB cable and upgrade firmware, initialize device and set up

again from “Primary Setup”.

 PC cannot recognize device by USB connection.

• The USB cable should be connected after completion of booting device. Please try again in this order.

• Please try to connect to other USB port of PC, and install USB driver again.

 Controller app cannot find Player device.

• Hotspot Mode : Please check whether “Personal Hotspot” of your smartphone is activated. If yes, check whether SSID and password are correctly set to Player.

• Wi-Fi Mode : Please check whether smartphone and Player are connected to the same Wi-Fi AP. Also check if its SSID and password are correctly set to Player.

• Player AP Mode : Please check if you entered SSID and password correctly to your smartphone.

 The music files in MicroSD card are not listed.

• Please check whether the card is formatted with FAT, if not, try again after formatting with FAT and copying music files.

 The channel of remote server is not activated.

• Samba server : Check whether IP address, share-name and password are correct by checking whether other PC can share the directory with the same share-name properly.

• FTP server : Check whether IP address, logon ID and password are correct by connecting with FTP from other PC to the server and logon with the same ID and password.

 I can’t hear the music by selecting a music file.

• If the problem is in a certain file, the file has corrupted data or its format may not be interoperable with livOn Player. Please send it to HiSonus via support e-mail.

 The device is stopped, the buttons doesn’t work.

• Please press “Reset” button in “Reset” hole with paper clip,

and turn on again.

 The file name is showed with broken characters.

• The title in tag or filename is not coded with UTF-8, but it

doesn’t affect to play.

Troubleshooting and Precautions

Precautions

 Wearing earphone while driving, exercising or climbing may cause fatal accident.  Listening for a long time with high volume may be harmful to your ears.

 Do not use other power adapter and USB cable other than those approved by HiSonus Inc.

 When you connect this product to PC via USB, do not connect to USB extension hub. Some USB extension hub may

cause problem recognizing the product.

 Be sure to set password of product during initial setup for privacy.  Do not use under high-temperature or humid environment and do not store it in hot or cold locations for a long

time. When this product is dropped in water, please ask A/S without turning the power on.

 Please turn it off in the Wi-Fi prohibited places such as airplane, hospital, near by heart defibrillator and so on.

 Keep the product away from high electromagnetic field near by magnets or high-voltage wire, as they may cause

malfunctions.

 Do not use strong detergent or chemicals to clean the surface of product.  Do not drop the product and place heavy objects on it.  The temperature of product may get high when used for a long time in a bag or pocket. The product can work in

high temperature, but longtime contacts with your skin may cause burns. So please stop playing and take it out of

closed space.

 This product has the function of overcharge prevention, but it is recommended to unplug the adapter after full

charging.

 When you insert MicroSD card or connect USB cable to this product, please keep the right direction. Wrong

direction or hard-handed insertion may cause out-of-order.

 Do not use this product for other purposes than those described in this manual.  Do not attempt to disassemble the player. It will void the warranty.

This page is intentionally left blank.

Beyond The Limit

HiSonus Inc.

4F Yeoksun Bldg., 547 Seolleung-ro Gangnam-gu,

Seoul 135-917, Korea www.hisonus.com

V1.0

HiSonus livOn HSP-M1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual