Hisense Electric LCDF0022, LCDF0020 User Manual
ACCESSORIES LIST1
User Manual Quick Setup Guide
Screw A (M5 × 12) × 8
Screw B
(M6 × 45) ×
Batteries: AAA × 2
4
Remote Control
Spacer × 4
INSTALLING THE STAND2
Follow the illustrations below to complete the installation steps.
1
Ridge
Groove
Align the front of the stand column
with the front of the base, then insert
the stand column into the base
making sure that the groove in the
stand column aligns with the ridge in
the base. Secure the stand column to
the base with 3 Screws A (M5 x 12) .
3
Secure the stand to the TV with the 4
Screws A (M5 x 12).
3
INSTALLING A WALL-MOUNT BRACKET
If you want to attach the TV to a wall-mount bracket(not provided), you should
rst remove the stand if it is pre-attached .
1
1. If you want to attach the TV to a wall-mount bracket (not
provided), you should first remove the stand if it is pre-attached.
Make sure the TV is laid face-down on a clean, safe, and
cushioned surface.
2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV
with the 4 screws in the Screw B pack.
Spacer × 4
WARNING
To prevent internal damage to the TV and ensure the TV is
mounted securely, use only the 4 screws in the Screw B pack.
2
Stand cover
Stand column
Back View
Align the stand cover with the stand
column, then secure the stand cover to
the stand column with 1 Screw A (M5
x 12) . Make sure that the bottom of the
stand cover is flush against the top of
the stand column.
NOTES
Product image is only for reference, actual product may
vary in appearance. Carefully place your TV facedown on
a soft, cushioned surface to prevent damage to the TV or
scratching to the screen.
Bracket (1.5~2.5 mm)
Screw B
K362G
2
Wall-Mount hole pattern VESA (mm)
Wall-Mount screw size (mm)
Series
Screws B
9.5~12.5 mm
Wall-mount Bracket
Screw
Spacerthe TV’s rear cover
400 × 400
M6
Follow instructions provided with the Wall-Mount bracket.
• If you are not sure of your ability to do complete the installa-
tion, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any
damages or injuries that occur due to mishandling or incorrect
assembly.
• Be sure to use the provider spacers between the TV and the
bracket when attaching the mount.
BUTTONS AND CONNECTORS
4
MENU
INPUT
VOL+
VOL-
CH
CH
AC power cord
AV IN
AUDIO
VIDEO
Y PBP
COMPONENT IN
DIGITAL
AUDIO OUT
USB
DC 5V 0.5A(MAX)
AUDIO
OUT/
Item Description
MENU
INPUT
VOL+/-
CH
/
(Power button)
ANT/CABLE Connect an antenna or cable TV to this jack.
HDMI
COMPONENT IN
AV IN
VGA
PC/DVI AUDIO IN
/AUDIO OUT
DIGITAL AUDIO OUT
USB
Display the on-screen menu to setup your TV’s features.
Select the different input signal sources.
Adjust the volume.
Select the channel.
Turn on the TV or put the TV in standby mode.
Caution:
The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect power.
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this TV and
any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V
receiver.
Connect to a DVD player, Digital Set-Top-Box, or other A/V devices
with component (YP
PR) video and audio output jacks.
B
Connect to the composite video and audio (L/R) output jacks on
external video devices.
Connect to a PC or other devices with a VGA or DVI interface.
Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).
Connect an audio amplifier to this jack.
Port for Digital Media Player and for software update.
L
R
R
HDMI1/ARC
PC IN
ANT/CABLE
VGA
PC/DVI
AUDIO IN
HDMI2 HDMI3
REMOTE CONTROL5
Remote sensor
Power on/off
Select TV AV VGA
USB source
Select HDMI source
TV
HDMI
AV
VGA
PICTURE
USB
COMPONENT
Select input source
Select picture mode
Select Component source
Select sound mode
SOUND
TIME
ASPECT
MTS/SAP
Zoom button
Audio select button Mono/
Stereo/SAP operation
Media content control function
Set the sleep timer
Adjust closed caption mode
Display the current time
SLEEP
CCD
buttons
Menu button
▲
▲/
/
/
Move Up/Down/Left
▲
/Right or adjust settings
Close the menu
▲
MENU
EXIT
FAV.CH
ENTER
DISPLAY
Display favorite list
Confirm selections
Display the information banner
Mute button
Increase volume
Decrease volume
VOL
MUTE
CH.LIST
CH
Next channel
Previous channel
Display the channel name
Direct channel
selection
Dash button select
a digital sub-channel
Media content control
function buttons
LAST
GUIDE
EN-22652A
Go to the previous
channel
Not available
CHANGE THE BATTERIES
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
1
Gently push and slide
2
Insert the batteries
3
Gently push and slide
TV CONNECTORS6
Check the jacks for position and type before making any connections. Loose
connections can result in image or color problems. Make sure that all connections are
tight and secure.
Connect an outdoor VHF/UHF antenna.
ANT
VHF/UHF Antenna
OR
OR
Connect a USB device for browsing photos, music and movies.
USB
USB
DC 5V 0.5A(MAX)
Cable
ANT OUT
Mobile Hard Disk
HDMI / COMP / AV
Connect an HDMI cable or Comp/AV Adapter from an
external A/V equipment.
Video Eect:
BEST (HDMI)
BETTER
R
AUDIO
L
AV IN
VIDEO
R
R
P
B
COMPONENT IN
Y P
(COMP)
GOOD
(AV)
AUDIO
L
R
P
AV IN
B
COMPONENT IN
Y P
VIDEO
VGA & VGA AUDIO
VGA
PC IN
PC/DVI
AUDIO IN
DIGITAL AUDIO OUT
Connect a VGA cable and an audio cable from the PC.
Connect an optical cable from an external digital
audio system.
DIGITAL
AUDIO OUT
HEADPHONE
AUDIO
OUT/
Connect Headphone for audio out of the TV.
OR
SPECIFICATIONS7
50K362G 55K362GModel Name
Without Stand
Dimension
Height: 26.2 inches (666 mm)
Depth: 2.5 inches (64 mm)
Width: 44.3 inches (1124 mm)
Width: 44.3 inches (1124 mm)
With Stand
Height: 28.7 inches (729 mm)
Depth: 11.1 inches (281 mm)
Weight
With Stand
LCD Panel Minimum size
(diagonal)
Screen resolution
Audio power
Power supply
Without Stand
Receiving
systems
Analog
Digital
39.7 lbs (18 kg)
46.3 lbs (21 kg)
49.6 inches
1920 × 1080
10 W + 10 W
120 V ~ 60 Hz
NTSC
ATSC / QAM
VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125
Receiving channels
Digital Terrestrial Broadcast (8VSB): 2 ~ 69
Digital cable (64/256 QAM): 1 ~ 135
Tuner type
Environmental conditions
Frequency synthesized
Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Humidity: 20% ~ 80% RH
Atmospheric pressure: 86 kPa ~ 106 kPa
Component Input
480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz,
VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)
HDMI Input
RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, )
Width: 49.2 inches (1249 mm)
Height: 29.0 inches (737 mm)
Depth: 2.3 inches (58 mm)
Width: 49.2 inches (1249 mm)
Height: 31.6 inches (803 mm)
Depth: 13.0 inches (330 mm)
52.9 lbs (24 kg)
61.7 lbs (28 kg)
54.6 inches
CY-G131517
Barcode
35*10.5mm
TURNING THE TV ON FOR THE FIRST TIME8
Menu Language Time Setting
Choose Your Menu Language
English
Español
Français
ENTER
Enter Select
Set menu language to English,
MENU
Return
Français, or Español
EXIT
Exit
Connect your TV’s power cord to a power outlet, then press
power. The initial setup screen opens. Press [▲/▼] button to
select your language, press [ENTER] button to confirm.
Mode
Time Zone
Daylight Savings
Year
Month
Day
Time
ENTER
If Automatic, options are automatically set by TV source
Setting Time Zone:
your region.
Setting the Time: Press [▲/▲] to select the number you want
to set and press [▲/▼] to set.
Choose Your Time Setting
Enter Select
Select the local time zone according to
MENU
Return
Auto
On
2012
January
01
01:10 AM
EXIT
Exit
Picture Mode TV Source
Choose Your Picture Mode
Home Mode
Retail Mode
Home mode default settings are recommended for in-home
use. ENERGY STAR@ qualified.Retail mode is intended for
in-store display and resets video settings at Power On.
ENTER
Enter
Reduces total power consumption
Select Return
MENU
EXIT
Exit
Press [▲/▼] to select your Picture Mode: Home Mode or
Retail Mode, press [ENTER] button to confirm.
If you select Retail Mode, a message appears “ Are you
sure you want retail mode?” Select “Yes” to continue, or
select “No” to change your selection.
For energy saving, we kindly suggest you select the Home
Mode.
ENTER
Select if using an antenna for standard or HD TV
Press [▲/▼] to select your TV Source: Antenna or Cable,
press [ENTER] button to confirm.
If you press [EXIT] to exit the scanning, a message appears
“Please Run Channel Auto Scan”, you should scan channels
from the menu of Channels
Choose Your TV Source
Enter
Select Return
Antenna
Cable
MENU
EXIT
Exit
Note:
If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned
on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.
HELP TOPICS9
When there is something wrong with your TV, you can try turning o the TV and restarting it. You can also refer to the following chart
for problem and solution tips. If the problem cannot be resolved, please contact Hisense for additional assistance 1-888-935-8880.
POSSIBLE SOLUTIONSSYMPTOMS
No sound or picture
Picture is normal, but no sound
I have connected an external
source to my TV and I get no
picture and/or sound.
Sound but no picture or black
and white picture.
Sound and picture distorted or
appear wavy.
Sound and picture is blurry or
cuts out momentarily.
V
V] don’t work when I
[CH /
set the Channel to Cable?
They work with the Air setting?
Remote control does not work.
• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.
• Attempt to power on unit using the power button on both the TV and the Remote.
• Check the volume settings.
• Check if Mute mode is set "on" .
• Check for the correct output connection on the external source and for the correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the incoming signal.
•
If black and white picture first unplug TV from AC outlet and replug after 60 seconds.
•
Check Color Setting if picture is black and white.
•
An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes
away, move appliance farther away from TV.
• I
nsert the power plug of the TV set into another power outlet.
•
If using an external antenna, check the direction, position and connection of the antenna.
•
Adjust the direction of your antenna or reset or fine tune the channel.
•
After switching to Cable, please auto program the channels. The TV will “remember” all the channels then
the TV will allow you to surf the channels with [CH /V] buttons.
•
Confirm that TV still has power and is operational.
•
Change the batteries in the remote control.
•
Check if the batteries are correctly installed.
•
Clean the front of the remote control (LED window).
•
If using a universal remote, be sure to select the TV mode on the remote.
•
If the remote still does not work:
V
-Remove and reinstall the batteries correctly to reset the remote or install new batteries.
-Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries
you will need to reprogram the remote for the other units.
•
Check if there is obstruction between the remote control and the TV.
TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at
this time, the camera should set on camera mode, not play mode). Observe the camera screen while
pressing a button on the remote control; you should see flashing light on the screen. If there is no light
observed, the remote control is not working. You need to repair or replace the remote control.
Loading...