Hisense Electric LCDF0019, LCDF0030, LCDF0018 User Manual

CY-

Barcode 35*10.5mm

Turning the TV On for the First Time

TV CONNECTORS6

ACCESSORIES LIST1

•

User Manual

•

Battery x 2

For 50K610GWN

•

Screw (M4 x 12mm) x 6

•

Wall-mounted screw (M6 x 45mm) x 4

For 55K610GWN

•

Screw ( M5 x 12mm) x 10

•

Quick Setup Guide

•

Spacer x 4

•

Screw ( ST4 x 14 mm) x 2

•

Screw ( ST4 x 14mm ) x 2

•

Warranty Card

•

Screw (M5 x 12mm) x 4

•

Wall-mounted screw (M6 x 45mm) x 4

•

Remote Control

K610 Series

INSTALLING A WALL-MOUNT BRACKET

If you want to attach the TV to a wall-mount bracket (not provided), you should rst remove the stand if it is pre-attached (see Step 1).

Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.

Connect an outdoor VHF/UHF antenna.

ANT

HDMI / COMP / AV

REMOTE CONTROL4

Connect an HDMI cable or Comp/AV Adapter from an external A/V equipment.

Video Eect:

BEST (HDMI)

Power:

INPUT

Input: Select source to watch.

VUDU:

Turns the TV on or o.

Press to launch VUDU, the premium video service.

BETTER (COMP)

L -AUDIO- RVIDEO

AV IN

COMPONENT IN

VHF/UHF Antenna

Cable

ANT OUT

4.Use Mode Next: Network Setting

Use Mode

Home mode

Retail mode

Home mode default settings are recommended

Previous Next

OPERATIONSMENU

Language setting

Country setting

Time zone setting

Use Mode

Select Network

• Please press [ENTER] to start the wizard, then press [▲/▲] button to select your language: English, Spanish or French, select [Next] to confirm enter the Welcome screen.

• In the Welcome screen introduced the available input devices and interfaces.

• Please press [▲/

• Select the local time zone according to your region.

• Daylight Saving: Set the Daylight Saving time for your area.

• Select your Mode Setting: Home Mode or Retail Mode.

• If you select Retail Mode, a message appears “Are you sure to change to retail mode?” Select “OK” to continue, or select “No” to change your selection.

• Home Mode is the recommended setting which offers full functionality of the television. If you selected Retail Mode, Energy

Saving is not realized.

• The Select Network : Connect your TV to access the network.

• When the Network Setting menu opens, Hisense Service Terms and Conditions will appear. Press [◄/►] to scroll through the pages. Please read it carefully. If you want to access the internet, press the [Agree] button to set your TV’s network connections. Otherwise, press the [Disagree] button to enter the Channel search menu.

• You can setup the network configuration in this menu. For more information, Connection” and “Network Setup”

▲ ] button to select the country where you will operate the TV.

5.Select Network Next: Channel Search

Select Network

Wired Network

Wireless Network

Connect a wireless network with Wi-Fi

Previous Next

in the user manual.

Skip

6. Channel Search

Channel Search

Please allow 30 minutes to complete.

ATV Channels added:0

DTV Channels added:0

Stop

please refer to the section titled

30%

“Network

INSTALLING THE STAND2

Follow the illustrations below to complete the installation steps.

STAND COLUMN

Secure the STAND COLUMN to the BASE with

Carefully place your TV on a soft, cushioned, surface to prevent damage to the screen.

SCREWS M5×12mm

TV BACK

BASE STAND

Align the BASE STAND with the screw holes on the bottom of TV BACK, secure the BASE STAND to the TV with the 4 screws tightly.

4 screws.

STAND COVER

Secure the STAND COVER to the STAND COLUMN with 2 screws.

STAND COVER

SCREWS ST4 × 14mm

Secure the STAND COVER to the STAND COLUMN with 2 screws.

BASE

SCREWS

M4 x 12mm（50K610GWN） M5 x 12mm（55K610GWN）

M4 × 12mm（50K610GWN） M5 × 12mm（55K610GWN）

SCREWS

STAND COLUMN

Make sure the TV is laid face-down on a clean, safe, and cushioned space, remove the original screws in the bracket holes on the TV back.

Note: These 4 screws which got from back cover mount hole could not be used any more.

YouTube:

HiSmart

HiSmart:

Press to launch YouTube, the video service.

Press to browse the Services Apps in HiSmart Home UI. The Apps in the Home UI let you watch movies, listen to music, and much more.

GOOD (AV)

L -AUDIO- RVIDEO

AV IN

COMPONENT IN

Channel Search

• Press [▲/▲] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm.

• Press [ TV automatically starts Channel Installation available in your viewing area; If you select “Skip Scan”, your TV does not scan

for channels; Depending on the reception condition, it may take up to 30 minutes or more to complete memorizing channels. Please allow the process to complete without interruption.

• After scan, you will enter the complete interface. It will display all informations that you set just now and then you can press “Go” to exit the wizard.

/▲] to set the Channel Installation: Scan or Skip Scan, press [ENTER] button to confirm. If you select “Scan”, your

▲

Note:

NETFLIX:

Press to launch NETFLIX instant video streaming.

VGA & VGA AUDIO

Connect a VGA cable and an audio cable from the PC.

If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.

NOTE:

1. Illustrations are for your reference only.

Wall monuted-screws M6 x 45mm

SPACER x4

Place the provided spacers in the corresponding bracket holes. Attach purchased bracket (1.5mm to 2.5mm thickness) on the TV with 4 screws which are in the accessories bag. Follow instructions provided with the wall-mount bracket.

SPECIFICATIONS5

Program Guide (EPG) . After pressing the [GUIDE] button when viewing digital channels, the same color buttons will appear with explanations in the on-screen display (OSD) . Follow the steps shown in the OSD.

LAN

50K610GWN 55K610GWNModel Name

2. Red/Green/Yellow/Cyan buttons are used for Electronic

Wall-Mount hole pattern VESA (mm)

Wall-Mount screw size (mm)

Follow instructions provided with the Wall-Mount bracket.

9.5 ~ 11.5 mm Wall-Mount Bracket

Screw SpacerThe TV's rear cover

400 × 400

• If you are not sure of your ability to do complete the

installation, contact a professional installer or service technician for assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly.

• The selected screws are 9.5 ~ 11.5 mm in length when

measured from the attaching surface of the TV's rear cover. The diameter and length of the screws differ depending on the Wall-Mount Bracket model.

Without Stand

Dimension

With Stand

Weight

LCD Panel Minimum size (diagonal)

Screen resolution Audio power

Power supply

Receiving systems

Receiving channels

Tuner type

Environmental conditions

Component Input

VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)

HDMI Input

Without Stand

With Stand

Analog Digital

Width: 44.3 inches (1126 mm) Height: 26 inches (661 mm) Depth: 2.35 inches (59.8 mm)

Width: 44.3 inches (1126 mm) Height: 28.5 inches (724.5 mm) Depth: 11.2 inches (285 mm)

39.7 lbs (18 kg)

46.3 lbs (21 kg)

50 inches

1920 × 1080 1920 × 1080 10 W + 10 W 10 W + 10 W

120 V ~ 60 Hz NTSC

ATSC / QAM VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125

Digital Terrestrial Broadcast (8VSB): 2 ~ 69 Digital cable (64/256 QAM): 1 ~ 135

Frequency synthesized

Temperature: 41°F ~ 95°F (5°C ~ 35°C) Humidity: 20% ~ 80% RH Atmospheric pressure: 86 kPa ~ 106 kPa

480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 Hz

RGB / 60 Hz (640×480, 800×600, 1024×768) YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)

Width: 49.1 inches (1248 mm) Height: 29.2 inches (743 mm) Depth: 2.32 inches (59 mm)

Width: 49.1 inches (1248 mm) Height: 31.6 inches (803 mm) Depth: 13 inches (330 mm)

49.8 lbs (22.6 kg)

58.6 lbs (26.6 kg)

54.6 inches

DIGITAL AUDIO OUT

HEADPHONE

USB

AUDIO IN

Connect an ethernet cable to access a network or the Internet. TV also features wireless connectivity.

LAN

Connect an optical cable from an external digital audio system.

DIGITAL

AUDIO OUT

Connect Headphone for audio out of the TV.

/AUDIO

OUT

Connect a USB device for browsing photos, music and movies.

Mobile Hard Disk

LAN

HELP TOPICS8

When there is something wrong with your TV, you can try turning o the TV and restarting it. You can also refer to the following chart

for problem and solution tips. If the problem cannot be resolved, please contact Hisense for additional assistance 1-888-935-8880.

POSSIBLE SOLUTIONSSYMPTOMS

No sound or picture

Picture is normal, but no sound

I have connected an external source to my TV and I get no picture and/or sound.

Network connection fail.

Connect Vudu/Netix fail.

How do I get easy IPTV to work on my TV?

• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.

• Attempt to power on unit using the power button on both the TV and the Remote.

• Check the volume settings.

• Check if Mute mode is set "on" .

• Check for the correct output connection on the external source and for the correct input connection on the TV.

• Make sure you have made the correct selection for the input mode for the incoming signal.

• Check network physical connection, make sure connection is correct.

• Enter "Menu" , "Network" , "Configuration" , make sure configuration is correct according to your network

service provider.

• Enter "Menu" , "Network" , "Configuration" , "Connection Test" to make sure that network connection test is

successful.

• Check network physical connection, make sure connection is correct.

• Enter "Menu" , "Network" , "Configuration" , make sure configuration is correct according to your network

service provider.

• Enter "Menu", "Network", "Applications", "VUDU/Netflix", "Deactivation" to reset "VUDU/Netflix" account.

• You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps.

• Connect the TV to the internet through your router by an Ethernet Cable or wireless. If connection fails,

check with your internet service provider or router manufacturer to determine if there is a firewall, content filter, or proxy settings that may block the TV from accessing the internet.

• Before calling for service, check the following information for possible solutions to problems you may

experience. If none of these solutions work, turn off the TV, then turn it on again.

• Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel.

ctual product.