Hisense Electric LCDF0032, LCDD0039 User Manual
ES-J135154-1
Barcode
THE REMOTE CONTROL4
Infra-red transmitter
35*10.5mm
1
PACKAGE CONTENTS
•
User Manual
•
Battery × 2 Screw (M5×12)×8
•
Quick Start Guide
•
•
Warranty Card
•
Power Cord
INSTALLING THE STAND2
Follow the illustrations below to complete the installation steps.
1
Groove
Ridge
Stand column
Base
Align the front of the stand column with the front of the
base, then insert the stand column into the base
making sure that the groove in the stand column
aligns with the ridge in the base.
2
Secure the stand column to the base with 3 screws
(M5×12).
•
Remote Control
Screws M5×12
H5 Series
QUICK START GUIDE
INSTALLING A WALL-MOUNT BRACKET
3
If you want to attach the TV to a wall-mount bracket
pre-attached.
1
Make sure the TV is laid face-down on a clean, safe, and
cushioned space, remove the original screws in the bracket
holes on the TV back.
Screw
(not provided)
Spacer
(not provided)
Place the spacers (not provided) in the corresponding bracket
holes.
Follow the instructions provided with the wall-mount bracket to
attach the bracket on the TV.
Bracket
(not provided)
Power on/off
Direct channel selection
Select a digital sub-channel
Launch Vudu HD Movies
Navigate Up / Down / Left / Right
or adjust OSD settings
Return to the previous menu
Media content control
Select picture mode
Display the favorite channel list
Dash button
MUTE button
Increase volume
Decrease volume
Enter TV source
MENU button
▲
/▲/
▲/
function buttons
Select sound mode
Set the sleep timer
▲
Select input source
Go to the previous channel
HiMedia (Digital Media Player)
Next channel
Previous channel
Launch YouTube App
Open the HiSmart Home Menu
Close the menu
Open the DTV program guide
(if available)
Special function buttons
(see Notes)
Display the information banner
ASPECT button
Adjust Closed Caption (CCD) mode
Audio select button
Select VGA / HDMI source
NOTE:
1. Illustrations are for your reference only.
2. Red/Green/Yellow/Cyan buttons are available when the same color buttons shown with explanations in the on-screen
display. Follow the steps shown in the OSD.
MAKING CONNECTIONS5
TV Side View
AUDIO
USB 1USB 2
HDMI 1/DVI
OUT
DC 5V 0.5A(MAX)
TV CONNECTORS7
Check the jacks for position and type before making any connections.
Loose connections can result in image or color problems. Make sure that all
connections are tight and secure.
Connect an outdoor VHF/UHF antenna.
ANT
VHF/UHF Antenna
Cable
ANT OUT
HDMI / COMP / AV
L -AUDIO- RVIDEO
PR
AV IN
B
P
COMPONENT IN
Y
L -AUDIO- RVIDEO
PR
AV IN
B
P
COMPONENT IN
Y
VGA & VGA AUDIO
PC/DVI AUDIO IN
OR
Connect an HDMI cable or Comp/AV Adapter from an
external AV equipment.
BEST (HDMI)
BETTER
(COMP)
GOOD
(AV)
Connect a VGA cable and an audio cable from the PC.
TURNING THE TV ON FOR THE FIRST TIME8
5.Select Network Next: Channel Search
Select Network
Wired Network
Wireless Network
Connect a wireless network with Wi-Fi
Previous Next
Skip
OPERATIONSMENU
Language setting
Country setting
Time zone setting
Use Mode
Select Network
Channel Search
Note:
If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned
on before starting the channel scan. If you use a cable or satellite box connected to AV, Component or HDMI, you don't need t o scan for channels.
• Please press [ENTER] to start the wizard, then press [▲/▲] button to select your language: English, Spanish or French,
select [Next] to confirm enter the Welcome screen.
• In the Welcome screen introduced the available input devices and interfaces.
• Please press [▲/
• Select the local time zone according to your region.
• Daylight Saving: Set the Daylight Saving time for your area.
• Select your Mode Setting: Home Mode or Retail Mode.
• If you select Retail Mode, a message appears “Are you sure to change to retail mode?” Select “OK” to continue, or select
“No” to change your selection.
• Home Mode is the recommended setting which offers full functionality of the television. If you selected Retail Mode, Energy
Saving is not realized.
• The Select Network : Connect your TV to access the network.
• When the Network Setting menu opens, Hisense Service Terms and Conditions will appear. Press [◄/►] to scroll through
the pages. Please read it carefully. If you want to access the internet, press the [Agree] button to set your TV’s network
connections. Otherwise, press the [Disagree] button to enter the Channel search menu.
• You can setup the network configuration in this menu. For more information,
Connection” and “Network Setup”
• Press [▲/▲] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm.
• Press [
TV automatically starts Channel Installation available in your viewing area; If you select “Skip Scan”, your TV does not scan
for channels; Depending on the reception condition, it may take up to 30 minutes or more to complete memorizing channels.
Please allow the process to complete without interruption.
• After scan, you will enter the complete interface. It will display all informations that you set just now and then you can press
“Go” to exit the wizard.
/
▲
▲
▲
] button to select the country where you will operate the TV.
in the user manual.
] to set the Channel Installation: Scan or Skip Scan, press [ENTER] button to confirm. If you select “Scan”, your
6. Channel Search
Channel Search
Please allow 30 minutes to complete.
ATV Channels added:0
DTV Channels added:0
Stop
please refer to the section titled
30%
“Network
Stand cover
Stand column
Align the stand cover with the stand column. Make
sure that the bottom of the stand cover is flush against
the top of the stand column.
5
Carefully place your TV facedown on a soft, cushioned
surface to prevent damage to the TV or scratching to
the screen.
43
Screws M5×12
Secure the stand cover to the stand column with 1
screw (M5×12).
6
Screws M5×12
After pre-installing the stand, secure the stand to the
TV with the 4 screws (M5×12).
2
To prevent internal damage to the TV and ensure the TV is
mounted securely, be sure to use fixing screws (not provided)
which are 9.5 mm to 11.5 mm in length when measured from
the attaching surface of the mounting hook.
9.5 ~ 11.5 mm
Wall-Mount hole pattern
VESA (mm)
Wall-Mount screw size
(mm)
Follow instructions provided with the Wall-Mount bracket.
Wall-Mount Bracket
Screw
SpacerThe TV's rear cover
200 × 200 (for 40”)
400 × 400 (for 48” 50”)
M6
• If you are not sure of your ability to do complete the installa-
tion, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any
damages or injuries that occur due to mishandling or incorrect
assembly.
• The selected screws are 9.5 ~ 11.5 mm in length when
measured from the attaching surface of the TV's rear cover.
The diameter and length of the screws differ depending on
the Wall-Mount Bracket model.
PC/DVI AUDIO IN
PC IN
VGA
ANT/CABLE
DIGITAL
AUDIO OUT
Power input
LAN
HDMI3/ARC
HDMI2
Y P
TV Bottom View
AV IN
P
B
R
COMPONENT IN
AUDIOVIDEO L R
SPECIFICATIONS6
40H5 48H5 50H5GModel Name
Without Stand
Dimension
(W×H×D)
With Stand
Weight
Active Screen Size
(Diagonal)
Screen resolution
Audio power
Power consumption
Power supply
Receiving
systems
Receiving channels
Tuner type
Environmental conditions
Component Input
VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)
HDMI Input
Without Stand
With Stand
Analog
Digital
36.39 inches (924.3mm)
21.46 inches (545mm)
3.33 inches (84.5mm)
36.39 inches (924.3mm)
23.82 inches (605mm)
8.86 inches (225mm )
22.05 lbs (10 kg)
25.35 lbs (11.5 kg)
40 inches
1920 × 1080 1920 × 1080 1920 × 1080
7 W + 7 W 8 W + 8 W 10 W + 10 W
Power consumption
120 V ~ 60 Hz
NTSC
ATSC / QAM
VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125
Digital Terrestrial Broadcast (8VSB): 2 ~ 69
Digital cable (64/256 QAM): 1 ~ 135
Frequency synthesized
Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Humidity: 20% ~ 80% RH
Atmospheric pressure: 86 kPa ~ 106 kPa
480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 Hz
RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)
42.9 inches (1091mm)
25.1 inches (637mm)
3.3 inches (85mm)
42.9 inches (1091mm)
27.7 inches (704mm)
11.1 inches (282mm)
33.1 lbs (15 kg)
39.7 lbs (18 kg)
47.6 inches
44.4 inches (1129mm)
26.3 inches (667mm)
3.1 inches (79.9mm)
44.4 inches (1129mm)
28.5 inches (725mm)
11.1 inches (282mm)
33.1 lbs (15 kg)
39.7 lbs (18 kg)
49.5 inches
Connect an ethernet cable to access a network or the Internet. TV
LAN
also features wireless connectivity.
LAN
DIGITAL AUDIO OUT
DIGITAL
AUDIO OUT
HEADPHONE
AUDIO
OUT
Connect a USB device for browsing photos, music and movies.
USB
Connect Headphone for audio out of the TV.
Connect an optical cable from an external digital
audio system.
OR
LAN
TROUBLESHOOTING TIPS9
chart for problem and solution tips. If the problem cannot be resolved, please contact Hisense for additional assistance.
SYMPTOMS
No sound or picture
Picture is normal, but no sound
I have connected an external
source to my TV and I get no
picture and/or sound.
Network connection fail.
How do I get easy IPTV to work
on my TV?
POSSIBLE SOLUTIONS
• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.
• Attempt to power on unit using the power button on both the TV and the Remote.
• Check the volume settings.
• Check if Mute mode is set "on" .
• Check for the correct output connection on the external source and for the correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the incoming signal.
• Check network physical connection, make sure connection is correct.
• Enter "Menu" , "Network" , "Configuration" , make sure configuration is correct according to your network service
provider.
• Enter "Menu" , "Network" , "Configuration" , "Connection Test" to make sure that network connection test is
successful.
• Check network physical connection, make sure connection is correct.
• Enter "Menu" , "Network" , "Configuration" , make sure configuration is
correct according to your network service provider.
• Enter "Menu", "Network", "Applications", "VUDU/Netflix", "Deactivation"
to reset "VUDU/Netflix" account.
• You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps.
• Connect the TV to the internet through your router by an Ethernet Cable or wireless. If connection fails, check
with your internet service provider or router manufacturer to determine if there is a firewall, content filter, or
proxy settings that may block the TV from accessing the internet.
• Before calling for service, check the following information for possible solutions to problems you may
experience. If none of these solutions work, turn off the TV, then turn it on again.
• Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel.
ng
ctual product.
Loading...