Hisense Electric LCDD0022 User Manual

CY-G

For Flat Panel TV

1

ACCESSORIES LIST

User Manual Quick Setup Guide

Screw A (M5 × 12) × 8

Screw B (M6 × 30) × 4

Batteries: AAA × 2

2

INSTALLING THE STAND

CAUTION

Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the
TV or scratching to the screen.

1

Ridge

Groove

Align the front of the stand column
with the front of the base, then insert
the stand column into the base
making sure that the groove in the
stand column aligns with the ridge in
the base. Secure the stand column to
the base with 3 Screws A (M5 x 12) .

3

Secure the stand to the TV with the 4
Screws A (M5 x 12).

3

INSTALLING A WALL-MOUNT BRACKET

1. If you want to attach the TV to a wall-mount bracket (not provided), you should first
remove the stand if it is pre-attached. Make sure the TV is laid face-down on a clean,
safe, and cushioned surface.

2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV with the 4 screws in the

Screw D pack.

Spacer × 4

3. Follow instructions provided with the wall bracket.

If you are not sure of your ability to complete the installation, contact a
professional installer or service technician for assistance. The manufacturer is not
responsible for any damages or injuries that occur due to mishandling or incorrect
assembly.

Be sure to use the provider spacers between the TV and the bracket when
attaching the mount.

2

Stand cover

Stand column

Back View

Align the stand cover with the stand
column, then secure the stand cover to
the stand column with 1 Screw A (M5
x 12) . Make sure that the bottom of the
stand cover is flush against the top of
the stand column.

Bracket (1.5~2.5 mm)

Remote Control

Spacer × 4

Screw B (M6×30)

K360 Series

4

MAKING CONNECTIONS

MENU

INPUT

CH

CH

VOL

VOL

AC power cord

HEADPHONE

USB

HDMI1 ARC HDMI2

Y PBP

COMPONENT IN

L

R

R

Item Description

MENU

INPUT

/

VOL

CH

/

(Power button)

ANT/CABLE Connect an antenna or cable TV to this jack.

HDMI

COMPONENT IN

AV IN

VGA
PC/DVI AUDIO IN

HEADPHONE Connect headphone for private listening.

DIGITAL AUDIO OUT

USB

Check the jacks' for position and type before making any connections. Loose connections can result in
image or color problems. Make sure that all connections are tight and secure.

VGA & PC / DVI AUDIO IN

PC/DVI AUDIO IN

Connect to a personal computer’s video and audio output connector.

ANT/CABLE IN

Display the on-screen menu to setup your TV’s features.

Select the different input signal sources.

Adjust the volume.

Select the channel.

Turn on the TV or put the TV in standby mode.
Caution: The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect power.

HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this TV and
any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V
receiver.

Connect to a DVD player, Digital Set-Top-Box, or other A/V devices
with component (YP

P

) video and audio output jacks.

B

R

Connect to the composite video and audio (L/R) output jacks on
external video devices.

Connect to a PC or other devices with a VGA or DVI interface.

Connect an audio amplifier to this jack.

Port for Digital Media Player and for software update.

OR

OR

L R

AV IN

VIDEO

HDMI 3/DVI

DIGITAL

AUDIO OUT

PC/DVI AUDIO IN

PC IN

VGA

ANT/CABLE

VHF/UHF Antenna

Cable

ANT OUT

DIGITAL AUDIO OUT

Connect a digital audio device to this jack.

BEST

HDMI IN

HDMI

Available devices: DVD, Blu-ray player,
Audio Video Receiver, cable box,
satellite receiver, game station.

BETTER

COMPONENT IN

RLLY

R

P

B

P

COMPONENT IN

Available devices: DVD, Blu-ray player,
Audio Video Receiver, cable box,
satellite receiver, game station.

GOOD

AV IN

RL

AV IN

VIDEO

Connect the composite video and audio
output jacks of your legacy A/V equipment,
such as a VCR.

5

VIEWING THE REMOTE CONTROL

Power on/off

Select TV AV VGA

USB source

Select HDMI source

Select sound mode

Set the sleep timer

Adjust closed caption mode

Display the current time

Menu button

▲

▲/

/

/

Move Up/Down/Left

▲

/Right or adjust settings

Close the menu

Increase volume

Decrease volume

Direct channel

selection

▲

TV

HDMI

SLEEP

CCD

MENU

EXIT

VOL

AV

PICTURE

SOUND

TIME

ENTER

MUTE

CH.LIST

VGA

COMPONENT

ASPECT

MTS/SAP

CH

USB

FAV.CH

DISPLAY

Remote sensor

Select input source

Select picture mode
Select Component source

Zoom button

Audio select button Mono/
Stereo/SAP operation

Function buttons (not available)

Display favorite list

Confirm selections

Display the information banner

Mute button
Next channel

Previous channel
Display the channel name

条形码定位框 35x10.5mm

1. Slide the back cover to open the battery compartment of the

物料号：

remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the
batteries with the (+) and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment cover.

1

Gently push and slide

6

CHOOSE YOUR PICTURE MODE

2

Insert the batteries

3

Gently push and slide

1. Press [▲／▼] to select your Picture Mode: Home Mode or Retail Mode, press
[ENTER] button to confirm.

2.If you select Retail Mode, a message appears “If you select Retail Mode, then
Energy saving is not realized. Are you sure?” Select “Yes” to continue, or select
“No” to change your selection.

3. For energy saving, we kindly suggest you select the Home Mode.

Initial Setup

Choose Your Picture Mode:

Back Select Next

7

CHOOSE YOUR TUNER MODE

Picture Mode

Home Mode

Retail Mode

EXIT

Exit

Press [▲／▼] to select your Tuner Mode: Antenna or Cable, press [ENTER] button

to confirm.

Antenna

Cable

EXIT

Tuner

Exit

Initial Setup

Please selsct your tuner mode:

Back Select Next

8

SPECIFICATIONS

Model 40K360 50K360

Width: 36 inches (922 mm)

Without Stand

Height: 21.7 inches (552 mm)

Depth: 2.3 inches (58 mm)

Dimension

Width: 36 inches (922 mm)

With Stand

Height: 24 inches (607 mm)

Depth: 8.9 inches (225 mm)

Without Stand 24.3 lbs (11kg)

Weight

With Stand 27.6 lbs (12.5kg)

Screen size
(diagonal)

40 inches

Screen resolution 1920 × 1080

Audio power 7 W + 7 W

Power consumption Please refer to the rating label.

Power supply 120 V ~ 60 Hz

Receiving
systems

Analog NTSC

Digital ATSC / QAM

Temperature: 41°F ~ 95°F (5°C~ 35°C)

Environmental conditions

Humidity: 20%-80% RH
Atmospheric pressure: 86 kPa - 106 kPa

Component Input

480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080
I / 60 Hz, 1080 P / 60 Hz

Width: 36 inches (922 mm)
Height: 22 inches (552 mm)

Depth: 9.8 inches (250 mm)

Width: 36 inches (922 mm)
Height: 26.9 inches (683 mm)
Depth: 9.8 inches (250 mm)

35.3 lbs (16kg)

40.6 lbs (18.4kg)

50 inches

WARNING

To prevent internal damage to the TV and ensure the TV is mounted securely, use
only the 4 screws in the Screw D pack.

Screws B

9.5~12.5 mm
Wall-mount Bracket

Wall-mount hole pattern VESA (mm)

Screw

Spacerthe TV’s rear cover

Wall-mount screw size (mm)

200 × 200

M6

Connect to a broadcast antenna or cable TV.

HEADPHONE

Connect Headphone for audio out of the TV.

Dash button select

a digital sub-channel

Media content control

function buttons

EN-22652A

LAST

GUIDE

Go to the previous
channel

Open the DTV program
guide (not available)

Dial:1-888-935-8880 (Toll Free) Email: [e-mail] http://www.hisense-usa.com

VGA Input

HDMI Input

VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz),
XGA (1024×768 / 60 Hz)

RGB / 60 Hz (640×480, 800×600, 1024×768)

YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)

NOTES

Features, appearance and specifications are subject to change without notice.

If you encountered diculty when setting up your TV, we suggest you
refer to the Trouble Shooting tips in the User Manual.