Hisense Electric LCDD0015 User Manual

HOSPITALITY LCD TELEVISION

Innovation for life

MODEL

NO. LTDN39V77MH

ES-

ii

Important safety instructions 2

Warnings
Cautions
Accessories

Installing and removing the stand 3

Installing the stand
Attaching the TV to the desk
Removing the stand
Installing a wall-mount bracket

TV components 4

Front and side controls
Back connections
Remote control

Using the remote control 6

Installing remote control batteries
Aiming the remote control

2
3
3

3

4
4
4

4
5

5

6
6

Making connections 7

Connecting the power
Selecting a location
Connecting an HDMI device
Connecting a component video device
Connecting an antenna,cable TV,or satellite TV box
Connecting a VCR, camcorder, or game console
Connecting a computer
Connecting a home theater system
Connecting headphones
Connecting devices with USB interface

Understanding the basics 9

Selecting the video input source
Selecting a channel
Adjusting the volume
Displaying program information
Navigating the menus
On-screen menu overview

Adjusting the picture

Choosing the display format (aspect ratio)

Adjusting the sound

Selecting the audio mode

Adjusting the Features
Adjusting the Installation

Troubleshooting

Video and audio
Remote control
General

Maintenance

Cleaning

Legal notices
Adjusting hotel settings

7
7
7
7
8
8
8
9
9

9

9
9
9
9
10
10
10

12
12
12
12

12

14

14

15
15
15

16
16

16

16

17

The issue

f

The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.

TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.

LTDN40V86MH

CHILD SAFETY

It makes a difference how and where you use

your flat panel display

As you enjoy your new product, keep these

safety tips in mind

1

Tune into safety

One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.

Carefully read and understand all enclosed instructions for
proper use of this product.

Don’t let children climb on or play with entertainment system
furniture and TVs.

Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.

Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.

Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.

Wall mounting

If you decide to wall mount your TV, always remember:

One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory as suitable for your TV.

Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a

professional installer.
Make sure that the wall where you are mounting the TV is

appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.

TVs can be heavy. At least two people are required for safe wall mount installation.

2

LTDN40V86MH

Important safety instructions

Important safety instructions

CAUTION
RISK OF ELECTRIC

SHOCK
DO NOT OPEN

This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.

This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with

the manufacturer's instructions.

8 Do not install near any heat sources such as radiators, heat

produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third g

rounding prong. The wide blade or the third prong are
provided for your safety. If the
your outlet, consult an electrician for replacement of the obsolete
outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11
12 Use only with a cart, stand, tripod, bracket, or

the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid inju

13 Unplug this apparatus during lightning storms or when unused

for long periods of time.

14

required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.

15 The wall plug is the disconnecting device. The plug must remain

readily operable.

16 An apparatus with a three-prong, grounding-type plug is a Class I

apparatus, which needs to be grounded to prevent possible
electric shock. Make sure that you connect this Class I television
to a grounding-type, three-prong outlet.

17 Remote control batteries should not be exposed to excessive heat

ry from tip-over.

3125A

18 The apparatus should not be exposed to dripping or splashing,

on the apparatus.

Warnings

Electric shock hazard

ric shock, do not remove any cover or

expose the device to rain or moisture. No user-serviceable parts are

Lightning

For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.

Power lines

An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.

Handling the LCD panel

Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
If the LCD panel is broken, make absolutely sure that you do not

If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.

Replacement parts

When replacement parts are required, make sure that the service

have the same characteristics as the original part. Unauthorized

hazards.

Safety check

After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.

Power source

Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.

Installing and removing the stand

LTDN40V86MH

3

Cautions

Damage requiring service

Unplug this TV from the power outl
service personnel under the following conditions:

When the power supply cord or plug is damaged or frayed.
If liquid has been spilled or objects have fallen into your TV.
If your TV has been exposed to rain or water.
If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive

nician to restore your TV to its normal
operation.
If your TV has been dropped or damaged in any way.
When your TV exhibits a distinct change in performance.

Outdoor antenna grounding

If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.

1

2

3

4

5

7

6

Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.

Mobile telephone warning

To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.

End of life directives

small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at www.eia.org to

Non-active pixels

provide exceptionally sharp video quality. Occasionally, a few

of your TV, and are not considered defects.

Accessories

Make sure the following accessories are included in the box with your
TV:

Remote control

AC power cord
AAA batteries (2)
Stand

Quick Setup Guide

Installing and removing the

Antenna lead-in wire

1

Grounding clamp

2

Antenna discharge unit

3

Grounding conductors

4

Ground clamps

5

Power service grounding electrode

6

system

Electric service equipment

7

Note to CATV system installer

Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides

it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.

Condensation

Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature

of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.

stand

You must install your TV into the stand in order for it to stand upright on

or other vertical surface, you must remove the stand .

Warn ing: Before attampting assembly or removal of the stand, unplug

the AC power cord.

Cautions:

Read these instructions carefully before you try to assemble the stand
or remove the stand .
Make sure that you handle the TV carefully when attempting to
assemble or remove the stand. If you are not sure of your ability to do
this, contact a professional installer or service technician. Hisense is
not responsible for any damages or injuries that occur because of
mishandling or incorrect assembly.

Use a soft cushion or covering to prevent scratching or damage to the
TV screen or cabinet.

Installing the stand

Note

To install the stand:

1 Remove the stand from the box and place it on a table or bench.

4

LTDN40V86MH

TV components

2 Lay the TV (screen down) on the edge of the table or bench. Make

sure that you put a soft cloth or cushion between the table or
bench and the TV.

3 Align the base with the TV, then secure the stand to the TV with

the 4 screws provided.

4 Carefully lift the TV into an upright position.

Attaching the TV to a desk

The TV must be attached to desk so it cannot be pulled in a
forward/backward direction,potentially causing injury or
damaging the product.

Installing a wall-mount bracket

If you want to attach the TV to a wall-mount bracket (not provided), you

Warning

only. To reduce the risk of hazards, do not perform any servicing other
than that contained in the operating instructions unless you are

To install a wall-mount bracket:

1 Lay your TV face down on a table or bench. Make sure that you

put down a soft cushion or cloth so that your TV is not scratched.

2 Remove the pedestal stand. See “Removing the stand” above.

3 Secure the wall-mount bracket to the back of your TV using the

four screws provided with the bracket.

Screws:M5×L(table depth + 8~10mm)
Example:Table depth = 15mm Screws:M5×25

12 inch(305mm)

(165mm)

6.5 inch

4-Screws

NOTE:
Be sure to follow the instructions,in correct installation of the stand

(pedestal) may result in the TV falling over.

Removing the stand

You must remove the stand before you can wall-mount the TV.

Note

To remove the stand:

1 Lay the TV (screen down) on the edge of the table or bench. Make

sure that you put a soft cloth or cushion between the table or
bench and the TV.

2 Remove the 4 screws holding the stand to the TV, then remove

the stand.

Desk

TV components

Front and side controls

1

2

Item Name Description

Power indicator

1

Remote control

2

sensor

MENU

3

INPUT

4

VOL / VOL

5

CH

6

/CH

The light shows whether the TV is on or standby
mode.

Receives signals from the remote control.
Please do not block.

Display the onscreen display(OSD) or Exit to close
the OSD.

Select the INPUT menu.

Volume adjusting bottom,to increase or
decrease the volume.

Channel selection bottom,to increase or
decrease the channel.

3

4

5

6

7

(power)

7

(standby mode).

TV components

LTDN40V86MH

5

Remote controlBack connections

1

USB

INPUT

MUTE

DMP

TV

ASPECT

INFO

SLEEP

GUIDE

CH

EXIT

6

HDMI3

MTS/SAP

CCD

PC AUDIO

PC

5

VGA

4

COMP1

VOL

SOUND

MENU

PICTURE

HDMI1

6

4

7

YP

DIGITAL

AUDIO OUT

HDMI2

COMP 2

B PR LR

VIDEO L RLR

AUDIO OUT

Item Name Description

1

USB

Thise unit has USB interface and can
connected the stand avd USB 1.1 and USB

2.0 USB FLASH STICK.

2

3

SERVICE

COMP1

4

COMP2

PC AUDIO

5

VGA jack

6

HDMI 1/2/3

DIGITAL

7

OUT

8

AUDIO OUT

9

AV

10

(headphone)

jack

jack

Connect an antenna or cable TV to this jack.

Service only, don't use.

Connect component video devices to these
jacks.

jacks

Connect a computer (audio and video) to these
jacks.

Connect an HDMI device to one of these jacks.

Connect a digital coaxial cable to this connector,

AUDIO

then to a digital sound system.

Connect a audio cable to this connector.

Connect a standard AV device, such as a
camcorder or game console, to these jacks.

Plug headphones into this jack.

jack

ANT IN

jack

Connect a RJ-12 Cable to this jack,

11

RJ12

external control device(such as a

A/V control system), to control the

externally.

HEADPHONE

AV

98 310

SERVICE

ANT IN

11

RJ12

2

be

ENTER

2

1

7 8 9

7

EN-31205

5

8

0

0

3

6 4

LAST

Item Name Description

Press to turn on the TV or put the TV in standby
mode.

1

POWER

Caution: The TV continues to receive power

even in standby mode. Unplug the power cord
to disconnect power.

In analog TV mode, press to select STEREO,

2

MTS/SAP

SAP (secondary audio language), or MONO.

In digital TV mode (DTV ), press to select the
audio track. For more information.

3

then to an

computer or

TV functions

4

CCD

SOUND

more information.

Press to select the sound mode. You can select
standard , custon , music and clear voice.

Press to select the video mode. You can select

5

6

PICTURE

VOL /

Standard, Custom, Vivid, Game, Cinema and
Power Saver.

Press to increase or decrease the volume.

VOL