Hisense Electric LCDD0074, LCDC0041, LCDD0069 User Manual
© 2016 Hisense Company Ltd. All Rights Reserved.
All material in this User Manual is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US, CANADA,
MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole
or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd. is a violation of
Hisense Company Ltd. rights under the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or
otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd.
Requests for permission to store, reproduce, transmit or distribute materials may be made to one of the following addresses:
USA: Hisense USA Corporation
PO Box 3289
Suwanee, GA 30024
CANADA: Hisense Canada Co., Ltd,
2283 Argentia Road, Unit 16
Mississauga, ON, Canada L5N 5Z2
MEXICO: Hisense Mexico S. de R.L. de C.V.
Blvd. Miguel de Cervantes Saavedra No 301 Torre Norte Piso 2, Col.
Ampliación Granada Miguel Hidalgo, Ciudad de México, C.P. 11520
Hisense, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks of Hisense
Company Ltd. and its subsidiaries. All other trademarks are the property of their respective holders
ENGLISH FRANÇAIS ESPAÑOL
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
N
ote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Disclaimer Page
**Notwithstanding anything to the contrary, including in any or all descrip
other communications related to this Hisense, Aquos or Quattron device (hereinafter “Device”) made in any form
whatsoever and at any time, some or all of the pre-installed, or subsequently installed Application Services may not
be available or capable of functioning as intended by the provider of the Application Services in any or all usage
areas for reasons outside of the control of the licensors or manufacturer of this device, including but not limited to,
Internet access, local service limitations, etc. Any purchase or use of the Device, including any Application Services,
is purely at the user’s risk. Application Services are provided on an as-available basis without warranties of any
kind, either expressed or implied, that the Application Service will be uninterrupted or error-free, including but not
limited to vagaries of weather, disruption of Service, acts of God, warranties of title, local or regional limitations,
no infringement, NOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. No advice or information given by the licensors or manufacturers providers, affiliates, or contractors or
their respective employees shall create such a warranty. All licensors and the manufacturer of this device, jointly
and separately, specifically disclaim any and all responsibility for any or all Application Services from functioning at
any time, and by purchasing the Device, you accept such disclaimer without any claim on the licensors and
manufacturer. You are solely responsible for providing an active and working connection to the Internet, along with any
and all hardware and/or software necessary to use the Device as intended.
tions, representations, statements or
Disclaimer:
Images throughout this document are for illustrative purposes only and may differ from the actual product.
2
ENGLISH FRANÇAIS ESPAÑOL
Content
Content ...............................................................................................................3
Connecting Devices to your TV ........................................................................4
Connecting an antenna, cable set-top box or satellite receiver ................................................4
Connecting a satellite receiver, DVD player or other audio visual (AV) device with a
composite video cable (yellow/red/white)..................................................................................4
Connecting an AV device with a component video cable (red/blue/green) .............................5
Connecting an AV device with an HDMI cable ..........................................................................5
Connecting a headphone ..........................................................................................................6
Connecting speakers or other audio receivers ..........................................................................6
Connecting a digital sound bar to use Audio Return Channel (ARC)........................................7
Using Your TV Remote Control .........................................................................8
Buttons on your TV remote .........................................................................................................8
Remote control range information ..............................................................................................8
Begin using your remote ............................................................................................................9
Completing the First-Time Setup Menu .........................................................10
Shortcuts Instructions .....................................................................................12
Selecting the input source .......................................................................................................12
Changing Channels / Volume ..................................................................................................12
Shortcuts Instructions ..............................................................................................................12
Basic Settings ..................................................................................................13
Using the Menu ........................................................................................................................13
Picture Menu ............................................................................................................................14
Audio Menu ..............................................................................................................................15
Channels Menu ........................................................................................................................16
Accessibility Menu ...................................................................................................................16
Settings Menu ..........................................................................................................................17
About TV Menu ........................................................................................................................19
Media .................................................................................................................20
Digital Media player .................................................................................................................20
Browse the Photos ...................................................................................................................21
Enjoy Music Files .....................................................................................................................21
Enjoy Movie Files .....................................................................................................................22
Quick Problem-Solving Tips ...........................................................................23
3
ENGLISH FRANÇAIS ESPAÑOL
Connecting Devices to your TV
You have several options for connecting your TV to different devices. The method in which you connect will be based
upon the type of cables you have and the available outputs on your device.
Connecting an antenna, cable set-top box or satellite receiver
To connect an antenna,cable set-top box or satellite receiver:
1. Connect one end of a coaxial cable (not included) to the
RF OUT
are using an antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect it to the
back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided).
2. Connect the other end of the cable to the
3. Using your remote, press the
[INPUT]
button and select TV as the input source.
ANT/CABLE IN
port on the side of TV.
port on the antenna, cable or satellite box. If you
TV PORT
ANT
CABLE IN
or
EXTERNAL DEVICE
Cable Set top box
ANT OUT
RF Out
Connecting a satellite receiver, DVD player or other audio visual (AV)
device with a composite video cable (yellow/red/white)
To connect an AV device with a composite video cable (not provided):
1. Use the audio and video cables to connect the composite video/audio ports of the external AV device to the
ports of the TV. (Video = yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the AV connectors on the TV before switching it on.
3. Using your remote, press the
[INPUT]
button and select AV as the input source.
EXTERNAL DEVICES
TV PORTS
LR
AV IN
VIDEO
Audio Cable
Video Cable
Red (R)Red (R)
White (L)White (L)
Yellow (Video)Yellow or Green (Video)
R
L
Video
AV OUT
Video
Camera
VCR
DVD Player/Recorder
Set-top box
Satellite Receiver
Satellite
antenna
cable
AV IN
4
ENGLISH FRANÇAIS ESPAÑOL
Connecting an AV device with a component video cable (red/blue/green)
To connect an AV device with a component cable (not provided):
1. Use a component video cable to connect the component output ports of the external device to the
for the TV. (Y = green, P
external device to the TV
2. Plug the connected devices into the
3. Using your remote, press the
= blue, and PR = red). Use an audio cable to connect the component audio ports of the
B
AUDIO (L/R)
[INPUT]
ports.
and
YP
BPR
L/R
button and select
ports on the TV before switching it on.
COMPONENT
as the input source.
EXTERNAL DEVICES
TV PORTS
YP
BPR
ports
Red(PR/CR) Red(PR/CR)
Blue(P
Green(Y) Green(Y)
Red(R) Red(R)
White(L) White(L)
) Blue(PB/CB)
B/CB
Component Cable
Audio Cable
Component
P
R
P
B
Y
Video
R
Camera
L
VCR
DVD Player/Recorder
Set-top box
Satellite Receiver
Satellite
antenna
cable
NOTE
• One AV device can be connected to the TV using a component video or composite video cable.
Connecting an AV device with an HDMI cable
This type of connection supports digital connections between HDMI-enabled AV devices such as a Personal Video
Recorder (PVR), DVD, Blu-Ray, AV receiver and digital devices. In addition, some devices (such as a PVR or DVD
player) require an HDMI signal to be set to Output in the settings of the device.
Please refer to the User Manual that came with your device for step-by-step instructions.
To connect an AV device with an HDMI cable (not provided):
1. Use an HDMI cable to connect the HDMI output port of the AV device to the
2. Plug the connected devices into the
3. Using your remote, press the
[INPUT]
port on the TV before switching it on.
HDMI
button and select the corresponding
HDMI
HDMI
input.
port of the TV.
EXTERNAL DEVICES
TV PORT
HDMI
HDMI Cable
HDMI
DVD
Set-top Box
NOTES
• Because the HDMI connector provides video and audio signals, it is not necessary to connect an audio cable.
• We strongly recommend to use HDMI Cable with 2 cores as shown in the figure.
5
ENGLISH FRANÇAIS ESPAÑOL
Connecting a headphone
TV PORT
EXTERNAL DEVICE
You can connect headphone (not provided) to the
AUDIO OUT
port on your TV. While the headphone
is connected, the sound from the built-in speakers
AUDIO OUT
/
Headphone
will be disabled.
Connecting speakers or other audio receivers
To connect speakers or other audio receivers with an audio cable (not provided):
1. Use an audio cable to connect the digital audio in port of the audio receiver device to the
port of the TV. Another option is to use an RCA Y-cable (1/8”-stereo mini to L/R phono) to connect an analog sound
system to the
AUDIO OUT
port of the TV.
2. Plug the connected devices into the main power socket before switching on the TV.
TV PORTS
EXTERNAL DEVICES
DIGITAL
AUDIO OUT
AUDIO OUT
/
Audio Cable
Audio Cable
Red(R)
White(L)
Digital Sound Bar
Audio Amplifier
Powerless
Bass Speaker
DIGITAL AUDIO OUT
Speaker
•
If you prefer to use Audio Return Channel, then see Connecting a digital sound bar to use Audio Return Channel
TIP:
(ARC) on page 7.
NOTES
• When a digital audio system is connected to the
DIGITAL AUDIO OUT
• 5.1 CH (channel) audio is available when the TV is connected to an external device that supports a 5.1 channel
surround sound
• You can receive 5.1 channel audio in one of two ways. The first way is to connect the
from the device to the Amplifier. The second way is to connect the
TV to the Optical port on the Amplifier. After you’ve completed one of the two methods then be sure to go into the
Advanced Audio Settings
of the TV and select RAW to receive the 5.1 channel audio. You will need to also go
into the sound or audio settings of your device to ensure it is set to 5.1 Channel output. It may read ‘Bitstream’, ‘RAW’
or ‘Digital’.
port, decrease the TV and system volume.
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
port on the back of the
port
6
Loading...