Hisense RR53D6AAE, RR53D6ARE, RR53D6ASE, RR53D6AWE, RR63D6AWE User's Operation Manual

WARNING-Take off the doors. Leave all
the shelves in place so that children may
not easily climb inside.

Installing the rubber supporting pad

If there is a rubber supporting pad and a

screw provided in a plastic bag with your

appliance, you can install these

accessories according to the following

procedure.

Note:

yThere is no need to install these

accessories under normal usage.
Only under the extreme circumstances,

that is, cabinet empty while load on door

with total mass of 16 kg (including 2 L

water in water storage box) and opening

the door about 90 degree, this refrigerator

may take risk of tipping. Then rubber

supporting pad should be fastened to the

lower base cover to steady this appliance.

1. Tilt appliance to find screw hole on the

left of lower base cover.

lower base cover

2. Put screw into the hole of rubber

supporting pad.

rubber supporting pad

screw

3. Make screw in alignment with the hole

on lower base cover. Fasten rubber

supporting pad to the base cover firmly by

a cross screwdriver (self-provided).

cross screwdriver

Stat e of Ca lifor nia P ropositi on 65 Warni ngs :
WARNI NG: This produ ct co ntain s one o r more ch ern icals know n to th e State o f Cal iforn ia to c ause cance r.
WARNI NG: This produ ct co ntain s one o r more ch ern icals know n to th e State o f Cal iforn ia to c ause birth

defe cts o r other repr odu ctive h arm .