Compact Double Door Refrigerator
Owner’ s manual
Model:LCT43D6ASE
LCT43D6AVE
COPYRIGHT STATEMENT
© 2015 Hisense Company Ltd. All Rights Reserved.
All material in this Owner's Manual is the property of Hisense
Company Ltd. and its subsidiaries, and is protected under US and
in any manner, electronic, print, or otherwise, without the prior
or distributed, in whole or in part, in any manner, electronic or
Requests for permission to store, reproduce, transmit or distribute
materials may be made to the following address:
PO Box 3289
Suwanee, GA 30024
Hisense, and any and all other Hisense product names, logos, slogans
or marks are registered trademarks of Hisense Company Ltd. and its
holders.
2
2
This appliance is not intended for use by persons (including children) with
reduced physical,sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure their do not play with the appliance
For compression-type appliances which use flammable refrigerants, instructions
shall include information
pertaining to the installation, handing, servicing
4
6
19. WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction.
20. WARNING: Do not damage the refrigerant circuit.
21. WARNING: Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
1
22. WARNING: Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
Appliances which use flammable insulation blowing gases instructions shall include
information regarding disposal of the appliance
Instructions shall contain the substance of the following;
Do not use extension cords or ungrounded (two prong) adapters
This product should not be disposed with other household wastes.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal recycles it responsibly to promote the sustainable reuse of material resources.
To return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling
WARNING! Refrigerators contain refrigerant and gases in the insulation.
Refrigerant and gases must be disposed of professionally as they may cause eye
injuries or ignition Ensure that tubing of the refrigerant circuit is not
damage prior to proper disposal.
2
prong) adapters.
Do not use extension cords or ungrounded(two
3
4
1.F reeze r Compa rtmen t
2.F reeze r Shelf
8.F reeze r Door Ga sket
3.L ight Bu lb(Be hind Th ermos tat)
4.T hermo stat Co ntrol K nob
5.R efrig erato r Shelf
6.R efrig erato r Compa rtmen t
7.C rispe r Drawe r
1.Freezer Compart men t
2.Freezer Shelf
3.Light Bulb(Behi nd Th erm ost at)
4.Thermostat
5.Refrigerator Co ntr ol Kn ob
6.Refrigerator Co mpa rtm ent
7.Crisper Drawer
8.Freezer Door Gask et
9.Refrigerator Do or Ga ske t
10.Upper Shelf
11.Middle Shelf
12.Down Shelf
9.R efrig erato r Door Ga sket
10. Upper S helf
11.M iddle S helf
12. Down Sh elf
5
0
0
6
Warni ng: The LED light must not be replaced b y the user!
If the LED light is damaged, contact the cus tomer helpline
for assistance. To replace the LED ligh t, the below steps
can be followed:
1 .Unplug your appliance.
2. Remove light cover by pushing and pryin g.
3. Remove screw cover and unscrew the cont roller box.
4. Replac e LED light and snap it correctly in place.
7
Changing the door from the right side to the left.
The side at which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site requires.
ools you will need:
T
. 8mm socket driver
phillips screwdrivers
.
Putty Knife or slotted srewdrivers
.
.
7mm wrench and 6mm wrench
Parts you will need ,parts are from the package of manual
5.Remove
upper door and pla ce it on
smooth surfa ce with panel upwards.
6.
Loose screws us ed to fix middle hinge
and remove midd le hinge. Then turn middle
hinge by 180. Take washer on axis and put
it on another end. Place it well for use.
door stopper
Caution:
To a void
to inj ury your self and /or prop erty,
we rec ommen d som eone as sist yo u dur ing
the do or rever sal proc ess.
.En sure the App lianc e is unp lugg ed and
emp ty.
.Fo llowi ng ste ps are gen erall y
rec ommen ded
1. Stand the refrigerator, open the upper
door and remove the things in the door and
close it.
2. open the screw hole cove and the upper
hinge cover which is at the top right corner of
the refrigerator.
hole co ver
scre w
3.Unscrew the special flange self-tapping
screws which are used for fixing the right
upper hinge part by a 8mm socket driver
or a spanner(please support the upper
door with your hand when doing it ).
right upper hinge part
4.Remove the right upper hinge part and
smooth surface.
upper hinge
cover (right)
special flange
selftapping screws
,
door stop
7. Remove lower do or and place panel
upwards on smoo th surface.
8. Change scr ew hole covers on middle
cover plate from left to right (as shown in
figure below ).
Lower hinge paΰrt rightα
Fr
ont fo ot fi xed bo ard
Adjustable bottom feet part
Self tapping screws
Note: Before this step, you should lay the refrigerator
on it’
s back in order to gain access to the base, you
the screw hole cover place them on
should rest it on soft foam packaging or similar
material to avoid damaging the cooling pipes at the
rear of the refrigerator.
8
10. Change lower hinge part to left and front
foot fixed bo ard to right and fix them w ith
screws. Then install adjustable bottom feet
parts.
Lower hinge part ( left)
11.Remove the door stop (right) and
door stopper (right) with
Phillips screwdrivers
,Install the door stopper(left) and
door stop (left) which are from the package
of user's manual
move l
Stand the ref rigerator then
door and adjust its position to align lower
hole(left) site and lower hinge axis. Then
adjust midd le hinge and align the middle
hinge axis to t he higher (left) hole si te. Then
install the middle hinge.
ower
13. Replace and the right upper hinge Install
cov er on the l eft cor ner, Rep lace th e screw
hol e cover o n the rig ht corn er.
14. Stand a nd leve l the app lianc e.
NOTE:
Bef ore the a pplia nce is po wered , We
rec ommen d that yo u shoul d wait fo r about
2 hours
.
Note: washer may
stick to lowe r door.
Washer
9
Loading...