Hisense LCD3703EU Schematic

LCD3703EU
CHASSIS SERVICE MANUAL
(V1.0)
JUL. 13 2005
INNOVATION IS LIFE
CONTENTS
SAFETY PRECAUTION
PRODUCT SAFETY NOTICE
LCD PANEL SPEC.
BLOCK DIAGRAM
CIRUIT DIAGRAM
SOFTWARE UPDATING
FAQ
SPARE PARTS
INNOVATION IS LIFE
SAFETY PRECAUTION
WARNING:
Service should not be attempted by anyone unfamiliar with the necessary precaution on this
receiver.The following are the necessary precaution to be observed before serving this chassis.
1.Since the power supply circuit of this receiver is directly connected to the AC power line ,an Isolation transformer should be used during any dynamic service to avoid possible shock hazard.
2.When replacing a chassis in the cabinet, always be certain that all the protective devices are put back in place, such as : non-metallic control knobs, insulating cover,shields, isolation resistor­capacitor network etc.
3.When replacing parts or circuit boards, disconnect the power cord.
4.When replacing a high wattage resistor (oxide metal film resistor ) on the circuit board, keep the resistor(1/2in) away from circuit board.
6.Connection wires must be kept away from components with high voltage or high temperature.
7.If any fuse in this LCD TV receiver is blown , replace it with the FUSE specified in the chassis part list.
INNOVATION IS LIFE
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in the chassis have special safety-related characteristics. These characteristics ar e oft en passed unnotice d by a visual inspe­ction. When replacement parts are required, be sure the servi ce technician uses replacement parts specified by us that have the same characteristics as the original part. Unauthorized substitutions may result in fir e, electric shock, injury to persons or other hazards. This LCD TV product should be situated away from heat source such as radiation, st ove s, or other product that produce heat.
INNOVATION IS LIFE

PRODUCTFUNCTION

- Back connections
INNOVATION IS LIFE

PRODUCT FUNCTION

Note: The above figures are for reference only, please refer to the actual units to determine their appearance
.
INNOVATION IS LIFE
PRODUCT FUNCTION
LCD-TV features
Multimedia - TV receiver, Video monitor and PC display, all in one.
Wider viewing angle, over 176 view angle
Digital display device - truthfully reproducing the images, without distortion
or blurring, irrespective of magnetic or geomagnetic effect.
200 channels storage
Sleep timer
Teletext with 252 pages memory and fastext feature
NICAM/A2 sound
Three SCART interface
Multi-language OSD
INNOVATION IS LIFE
LCD PANEL SPEC.
General Description
The LC370W01 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally black mode. This TFT-LCD has a 37.02 inch diagonally measured active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16.7M(true) colors with 8Bit.
The LC370W01 has been desig ned t o apply the 8Bit LVDS interface.It is intended to support LCD TV, PCTV where high brightness, wide viewing angle, high color saturation,
and high col or are i mport ant.
INNOVATION IS LIFE
LCD PANEL SPEC.
General Features
Active Screen Size 37.02 inches diagonal Outline Dimension 960.0(H) x 111.0(V) x 590.0(D) mm(Typ.)
Pixel Pitch 0.42675(H) x 0.42675(W) Pixel Format Color Depth 16.7M colors
Luminance, White 500 cd/m Contrast Ratio 600:1 Viewing
Angle(CR>10) Power
Consumption Response Time 16ms Display Operating
Mode Surface T reatment
1366 horiz. By 768 vert. Pixels RG B strip arrangement
2
(Center 1 points ty p.)
View Angle Free (R/L 176(T yp.), U/D 176(Typ.))
Total 200 Watt (T yp.)
T ransmissive mode, Normally Black Hard-Coating (3H), Anti-Glare,
Reflectance < 2%
INNOVATION IS LIFE
BLOCK DIAGRAM
Chassis Block Diagram
LVDS CONNECTOR
1
12
INVERT
1
12
POWER SUPPLY +24V
POWER SUPPLY +24V
1
AC 230V INPUT
POWER BOARD
30
LCD PANEL
Power connector +12V +5V standby
+5V/M
Power conntrol Bri. control
I/O CONTROL
+15V +12V +5V
AV IN/OUT
To lcd panel lvds connector
LCD PANEL POWER SUPPLY IS +12V(CHECK POINT)
MAIN BOARD
IIC BUS R/G/B/FB
VIDEO INPUT
TUNER BOARD
Sound Amp.
Connect to speaker
Connect to earphone
130
RS232
DVI-D INPUT
D-SUB 15PIN
RF
V
U
Y
Scart3 VIDEO IN/OUT
Scart2
S-video
VIDEO IN/OUT
Remote control Key button
Scart1 CANNAL+ RGB IN
AUDIO INPUT
INNOVATION IS LIFE
R
L
Loading...
+ 23 hidden pages