Hisense A7100F User Manual

Read the manual carefully and ensure you have fully understood

its contents before operating this device for the first time.

English

Deutsch

Español

Italiano

Português

ES-A194912-1

Français

Nederlands

Read the manual carefully and ensure you have fully understood

its contents before operating this device for the first time.

English

Important Safety Instructions

▐ Important Notice

Paragraphs beginning with the symbol indicate important instructions, tips or
conditions for the following settings.

For your own safety and the optimal performance of your TV, ensure to

read the safety instructions before performing any installation.

It is not guarantee operation and performance of peripheral devices made by other
manufacturers. We disclaim any liability or damage that may arise from operation and/
or performance from usage of such other maker’s peripheral devices.

The recording and playback of content on this or any other device may require
permission from the owner of the copyright or other such rights in that content. It is
your responsibility to ensure that your use of this or any other device complies with
applicable copyright legislation in your country. Please refer to that legislation for more
information on the relevant laws and regulations involved or contact the owner of the
rights of the content you wish to record or playback.

The Index/Glossary explains certain terms used in this user manual and in the TV menu.

Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions

All rights reserved.

▌Safety Instructions

To ensure safe and correct use of this product, always comply with the following
precautions to avoid dangerous situations and damage to your unit:

The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.

The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

AC voltage: This symbol indicates that the rated voltage marked with the
symbol is AC voltage.

Class II product : This symbol indicates that it does not require a safety connection of
protective earthing (ground).

A

Important Safety Instructions

The intended use and ambient conditions for this TV

This TV is intended for the rendering of video and audio signals, on a table-top or wall-

mounted, in a home or ofce environment. It must not be used in rooms with a high

level of humidity or dust concentration. The warranty is only valid if used as intended
by the manufacturer.

WARNING

High humidity and dust concentration may lead to current leaks in the device. To

reduce the risk of re or electrical shock:

- Do not expose this unit to rain, moisture, dripping or splashing water, and do

not place objects lled with liquids, such as vases, cups, etc. on or over the

unit.

- Do not touch the TV with wet hands.

- Do not expose to direct air-conditioning and keep candles or other naked

ames away from the TV at all times.

If the TV is moved from a cold environment to a hot environment, leave it switched off
for at least an hour to avoid condensation. If used outside, make sure it is protected
from moisture.

If you notice anything unusual, immediately remove the power plug.

In case of re, use preferably a CO2 gas or powder re extinguisher. If such extinguishers
are not accessible, try to isolate the electrical supply before using a water re extinguisher.

WARNING

Never place a television set in an unstable location. A television set may fall,

causing serious personal injury or death. Many injuries, particularly to children, can

be avoided by taking simple precautions such as:

- Using cabinets or stands recommended by the manufacturer of the television
set.

- Only using furniture that can safely support the television set.

- Ensuring the television set is not overhanging the edge of the supporting
furniture.

- Not placing the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and television set to a suitable
support.

- Not placing the television set on cloth or other materials that may be located
between the television set and supporting furniture.

- Educating children about the dangers of climbing on furniture to reach the
television set or its controls.

If your existing television set is being retained and relocated, the same
considerations as above should be applied.

B

Important Safety Instructions

Moving/Transportation

Before moving this TV, disconnect all
cables and move in the vertical position
only. Grasp the device on the upper and
lower edges of the frame.

- Do not press or put stress on the front
panel of the TV. It may take two or
more people to carry larger TVs.

If you have to briey lay down the TV,

place the unit with its entire front surface

lying at on soft material.

The LED screen is made of glass and can
break if is not handled properly. Always
wear rubber gloves to carry the unit. If
the LED screen is damaged, liquid crystal
might leak out. In case of skin contact,
immediately rinse thoroughly with water.

Power Supply

Incorrect voltages can damage the TV.

Only connect this unit to a power supply

with the correct voltage and frequency
noted on the type plate, using the
supplied power cable.

The power plug must be easily accessible
so that the device can be disconnected at
all time. The unit is live, even if in standby
mode, as long as the unit is connected to
a power outlet.

It is recommended that this unit is placed
on a dedicated circuit.

- Do not overload the power outlets by
connect too many appliances to the

same outlet. Overloaded wall outlets,

extension cords, etc. are dangerous
and can result in electric shock and

re.

After power off, don't turn it on again in
5 seconds. Frequent switching power
supply in a short period of time can cause
abnormal TV.

Power plug and power cable

- Do not touch the power plug with wet
hands.

- Do not place heavy objects on the
power cable. Route the cable so that it
is not kinked or laid over sharp edges,
walked on or exposed to chemicals. A
power cable with damaged insulation

can cause electric shock and re.

- Pull the power plug, NOT on the cable

when disconnecting. The cable can
become damaged and cause a short
circuit if pulled on.

- Do not place the power cable near a
high temperature object.

- Do not move the TV with the power
cable plugged into a socket.

- Do not use a damaged or loose power
cable, or a damaged socket outlet.

- Do not use any power cords other
than the one supplied with this unit.

Set-up

Check that the location is suitable to bear
the load of the TV. Place on a level, sturdy
and horizontal base. Ensure that the unit
does not hang over the edge of the base
when placed in or on furniture. If placed
on a cart, use caution when moving to
avoid the unit from tipping over.

- Place the unit in a normal upright
horizontal position. It must never

be operated vertically, lying at or

hanging overhead from the ceiling.

- Place the unit where it is not exposed to
direct sunlight or other sources of heat.

When mounting the TV on a wall, follow
the instructions supplied with the wall­mount, make sure not to install the TV by
hanging the power and signal cables on
the back of the TV.

C

10cm

10cm

Important Safety Instructions

Air ventilation and high

temperatures

Install your TV only where there is proper
ventilation, and ensure that there is at least
10 cm free space on the sides and 20 cm
above the unit for air circulation. Excessive
heat and obstruction of ventilation could

lead to re or early failure of some electric

components.

- Do not block any ventilation openings
with newspapers, tablecloths, curtains,
etc.

- Do not dry clothing etc. on top of the unit.

- Take care not to touch the ventilation
openings since they may become hot.

- Do not insert foreign objects into the TV
through the vents.

The Stand

- Do not use any stand other than the one
supplied with this unit.

- Do not modify or use the stand if it
becomes warped of physically damaged.

- During setup, make sure that all the
screws are securely tightened.

- Ensure that the TV does not suffer any
impact during the attachment of the
stand.

- Ensure that children do not climb onto
the stand.

- Attach or remove the stand with at least
two people.

20cm

10cm

Prevent small items from getting into the
interior of the device through the ventilation
slots. Such objects may cause short circuits,

which may cause re.

If something should get inside the unit,
immediately unplug the power plug of the
device and contact service support.

The LED screen

Despite thorough care when manufacturing
this display, it cannot be 100% guaranteed
that no sub-pixel defects will occur due
to technical reasons. These cannot be
considered as a device defect in terms
of the guarantee. They will not affect the
performance and reliability of the TV.

To prevent “image burn”, avoid displaying
still images for long periods of time, there
is a possibility that a copy of the image
may remain. If the aspect ratio is set to 4:3
for a long period of time, image burn may
occur on the black areas. Image burn is not
covered by the warranty.

- Do not apply strong force or impact on
the display panel.

Avoid touching the LED screen or touching
it for long periods of time. Doing so may
produce some temporary distortion effects
on the screen.

Radio waves

- Do not use the TV in any medical
institutions or locations with medical
equipment. Radio waves may interfere
with medical equipment and cause
malfunction.

- Do not use the TV near any automatic
control equipment such as automatic

doors or re alarms. Radio waves

may interfere with automatic control
equipment and cause malfunction.

D

Important Safety Instructions

If you have a cardiac pacemaker, keep a
distance of at least 22 cm from the TV. Radio
waves may interfere with the operation of a
pacemaker.

Built-in wireless LAN

- Do not connect to wireless networks
that you do not have the usage rights
for. Data transmitted and received over
radio waves may be intercepted and
monitored.

The built-in wireless LAN uses 2.4 GHz
frequency band. To avoid malfunctions
or slow response caused by radio wave
interference, keep the TV away from
devices such as other wireless LAN
devices, microwaves, mobile phones, and
other devices that use 2.4 GHz signal.

Warning about off-gassing

New furniture, carpet, paint, building
materials and electronics can release
chemicals into the air through evaporation.
After you set your TV up and turn it on for

the rst time, you may notice a slight smell

within a couple of hours. This is because
some components of TV are heating up

for the rst time. The materials that we use

fully meet the environmental requirements
and regulations. Your TV is working just

ne and the fumes from the off-gassing

will diminish eventually.

Supervision

- Do not let children play unsupervised
close to the TV. It could tip over, be
pushed off or pulled down from the
stand surface and injure someone.

- Do not allow a switched-on TV to run
unattended.

Volume

Loud music and noises can lead to
irreversible damage to your ears. Avoid
extreme volume, especially over long
periods and when using headphones.

If you hear a drumming noise in your ears,
turn down the volume or temporarily stop
using headphones.

Thunder Storms

Pull out the power plug and all connected
antenna cables from the TV during a

thunderstorm. Overvoltage caused by

lightning strikes can damage the TV via
the antenna system, as well as the wall
socket.

Long periods of absence

As long as the power plug is connected to
a live socket outlet, the TV will consume
power even in standby mode. The power
plug and all connected antenna cables
should be disconnected out during long
periods of absence.

E

Important Safety Instructions

Cleaning and care

CAUTION:

Unplug the power cord prior to cleaning
the TV.

Clean the TV, the screen, and the remote
control with a soft, moist, clean and
color-natural cloth only. Do not use any
chemicals.

- Do not subject the surfaces to insect
repellent, solvent, thinner or other
volatile substances. This may degrade
the surface quality.

- Do not spray water or other liquids
directly on the TV. Liquid inside the TV
could lead to product failure.

- The surface of the display panel is
treated and may be easily damaged.
Take care not to scratch it with

ngernails or other hard objects.

- Also wipe the power plug with a dry
cloth at regular intervals.

Service/Repair

Never remove the cover/back of the TV;
there are no user serviceable parts inside.

Refer all service to qualied service

personnel.

Packaging

swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital.

Modication

Do not attempt to modify this product

in any way. Unauthorized modication

could void the warranty of this unit, cause

electric shock and res.

Remote Control batteries

- Incorrect installation may cause battery
leakage, corrosion and explosion.

- Replace only with the same or
equivalent type.

- Do not mix old and new batteries.

- Do not mix different battery types.

- Do no use rechargeable batteries.

- Do not burn or break up batteries.

- Be sure to dispose of batteries
correctly.

- Do not expose batteries to excessive

heat such as sunshine, re or the like.

Outdoor Antenna Grounding

If an outdoor antenna used, be sure the
antenna system is protected against
voltage surges and built-up static charges.

Keep the anti-moisture materials and
plastic bags out of reach of children.

Plastic bags can cause suffocation and
the anti-moisture material is harmful if

Disposal

Refer to the recycling section of this manual.

F

Contents

Product image is only for reference, actual product may vary in appearance.
Parts of the software function changes with the system upgrade.

Contents

Accessories List..............................................................................................................1

Installing the Stand or Wall mount bracket .....................................................................2

TV Front..........................................................................................................................4

TV Rear ..........................................................................................................................5

Making Connections .......................................................................................................7

Remote Control ............................................................................................................10

Turning the TV on for the First Time .............................................................................13

Specifications ...............................................................................................................14

Other Information..........................................................................................................16

Accessories List

The following accessories are included with TV:

User Manual × 1 Warranty Card × 1 Remote Control × 1

Base Stand × 2 AAA Battery × 2 Screw × 4

Power Cord × 1(only for 65") RCA jack to AV Cable × 1(43"/50"/55")

NOTE

The accessories may be different from the list above due to different models, countries /
regions, please refer to the actual accessory bag.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Hisense Czech s.r.o declares that the radio equipment type [43A7100F
/ 43A7120F / 43A7140F / 43A7160F / 43AE7000F / 43AE7010F / 43AE7030F /
43AE7050F / 43A7100FTUK / 43A7120FTUK / 43AE7000FTUK / 43AE7010FTUK
/ 50A7100F / 50A7120F / 50A7140F / 50A7160F / 50AE7000F / 50AE7010F /
50AE7030F / 50AE7050F / 50A7100FTUK / 50A7120FTUK / 50AE7000FTUK /
50AE7010FTUK / 55A7100F / 55A7120F / 55A7140F / 55A7160F / 55AE7000F
/ 55AE7010F / 55AE7030F / 55AE7050F / 55A7100FTUK / 55A7120FTUK /
55AE7000FTUK / 55AE7010FTUK / 65A7100F / 65A7120F / 65A7140F / 65A7160F /
65AE7000F / 65AE7010F / 65AE7030F / 65AE7050F / 65A7100FTUK / 65A7120FTUK
/ 65AE7000FTUK / 65AE7010FTUK] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://global.hisense.com/downloads

.

1

Installing the Stand or Wall mount bracket

Installing the Stand

CAUTION

Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.

The screen display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch

or damage the screen display, comes into contact with it. DO NOT exert pressure on

the front of the TV at any time because the screen could crack.

Follow the illustrations and textual instructions below to complete the installation steps:

1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.

2. Remove the Base Stand from the accessory bag and then insert the stands into the
bottom slots of the TV.

3. Secure the Base Stand to the TV with the screws in accessory tightly.

43"/50"/55"

Base Stand

Base Stand

Screws

（M4×12) × 4 (50"/55")

2

M4×16) × 4 (43")

：　（

Installing the Stand or Wall mount bracket

65"
Attention

the base stand installation patterns, as shown in the figure.

: According to the size of the TV supporting surface, you can select one of

Screws

Base Stand

M5×12) × 4

（

：　

Base Stand

Base Stand

Base Stand

Screws

M5×12) × 4

（

：　

Installing the wall mount bracket

200 × 200 （43

Wall mount hole pattern (mm)

Wall mount screw size (mm) M6

8.0-10.0 mm(50"/55

Rear cover of the TV

Follow instructions provided with the wall mount bracket.

NOTE

•

The diameter and length of the screws differ depending on the wall mount bracket model.

•

Wall mount bracket is optional, your device may not have wall mount bracket, please refer
to the actual accessories.

200 × 300 （50"/55
300 × 200 （65

9.5 -11.5 mm(43"/65

)

"

Wall Mount Bracket

Wall Mount Screw
Wall Mount Spacer

3

）

"

）

"

）

"

)

"

TV Front

Single button (Remote sensor / Power indicator / Standby)

Item Description

Receive remote signals from the remote control.

Remote sensor

Power indicator

Standby / Source

Do not put anything near the sensor, as its function may be
affected.

The light is red in standby mode.

Press the single button when in standby mode, TV will be turned

on. Press the single button to call up the menu, when the focus

is on "Power Off", wait for 3 seconds, then the TV will go into

standby mode automatically.

/ Press the single button to call up the menu and then select

among the different input signal sources.

TV Front

NOTES

The Picture is Only for Reference.

Powering on the TV requires several seconds to load programs. Do not rapidly
turn the TV off as it may cause the TV work abnormally.

4

TV Rear

43"/50"/55"

Power cord

TV Rear

ANT 1

ANT 2

COMMON INTERFACE

HDMI 1

(4K@60Hz)

DVB-T/T2/C

DVB-S/S2

AV IN

CARD FACE FRONT

ARC

NOTES

ANT2 Jack supports power supply for satellite antenna
(13/18V, 0.5A max.)

Check the jacks for position and type before making any
connections. Loose connections can result in image or
color problems. Make sure that all connections are tight and
secure.

Not all A/V devices have the ability to connect to a TV, please
refer to the user’s manual of your A/V device for compatibility
and connections procedure.

Before connecting external equipment, remove the mains

plug from the wall socket. Otherwise, it may cause electric

shock.

5

(4K@60Hz)

HDMI 2

(4K@60Hz)

HDMI 3

USB × 2

DC 5V 0.5A(MAX) × 2

LAN

DIGITAL

AUDIO OUT

65"

AC INPUT

TV Rear

COMMON INTERFACE

R L VIDEO

AV IN

ANT 1

DVB-T/T2/C

ANT 2

DVB-S/S2

(4K@60Hz)

HDMI 1

(4K@60Hz)

HDMI 2

(4K@60Hz)

HDMI 3

DIGITAL

ARC

AUDIO OUT

LAN

NOTES

ANT2 Jack supports power supply for satellite antenna (13/18V,

0.5A max.)

Check the jacks for position and type before making any
connections. Loose connections can result in image or color
problems. Make sure that all connections are tight and secure.

Not all A/V devices have the ability to connect to a TV, please
refer to the user’s manual of your A/V device for compatibility and
connections procedure.

Before connecting external equipment, remove the mains plug

from the wall socket. Otherwise, it may cause electric shock.

6

USB 1

DC 5V 0.5A(MAX)

USB 2

DC 5V 0.5A(MAX)

Making Connections

LAN (

Wired setup

)

Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.

·

We recommend to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don’t have to enter them manually. Most home networks already have DHCP.

TV JACK

Wireless setup

IP Sharer (Router)

(with DHCP server)

LAN CableLAN Cable

External Modem

(ADSL / VDSL / Cable TV)

Modem Cable

Connect your TV to your network wirelessly, you need a wireless router or modem.
See the illustration below.

·

The built-in Wireless LAN Adapter supports the IEEE 802.11b/g/n
communication protocols. We recommend using IEEE 802.11n router. Low
transfer rates for b/g may have the influence on the quality of streamed videos
and other media.

Wireless router with DHCP

Wireless LAN Adapter

built-in TV set

LAN Cable

NOTES

You must use the built-in Wireless LAN Adapter to use a wireless network because
the set doesn’t support external USB network adapter.

If the wireless router supports DHCP, your TV can connect more easily to the wireless
network.

If you apply a security system other than the systems listed below, it will not work with
the TV.

Security system:WPA,WEP,WPA2.

In order to guarantee smooth network, the distance between router and TV should be
less than 10 meters.

7

ANT

Making Connections

ANT 1

DVB-T/T2/C

ANT 2

DVB-S/S2

or

(not included)

Antenna Cable (75Ω)

(not included)

Outdoor

Antenna

VHF/UHF Antenna

Satellite antenna

Cable

ANT OUT

DIGITAL

AUDIO OUT

HDMI
(ARC)

HDMI

HDMI

AV IN

DIGITAL

AUDIO OUT

HDMI

ARC

HDMI

AV IN

Audio Amplier/Speaker

DIGITAL AUDIO cable (not included)

Audio Amplier/Speaker

HDMI

HDMI cable (not included)

DVD/Blu-Ray/AV receiver/

Set-top Box

HDMI

HDMI cable (not included)

Red(R)

(not included)

White(L)

(not included)

Yellow(Video)

VCR/DVD Player/

Recorder/Set-top box/

Satellite Receiver/

Video Camera

A/V OUT

Video

R

L

(not included)

Yellow(Video)

VIDEOLR

AV IN

White(L)

Red(R)

VCR/DVD Player/

Recorder/Set-top box/

Satellite Receiver/

Video Camera

A/V OUT

Video

R

L

(Cables are not included)

8

Making Connections

COMMON

INTERFACE

USB

CAM CARD

1 2

SMART CARD

NOTES

Before you insert/remove the CI+ module, ensure that the TV
is switched off. Then insert the CI card into the CI+ module in
accordance with the Service Provider’s instructions.

Do not repeatedly insert or remove the Common Access
Module as this may damage the interface and cause a
malfunction.

You must obtain a CI+ module and card from the service
provider of the channels you want to watch.

Insert the CI+ module with the SmartCard in the direction
marked on the module and SmartCard.

CI+ is not supported in some countries and regions; check with
your authorized dealer.

USB

DC 5V 0.5A(MAX)

NOTES

When connecting a hard disk or a USB hub, always connect
the mains adapter of the connected device to the power
supply. Exceeding a total current consumption may result in
damage. The USB1.1 and USB2.0 devices maximum current
consumption are 500mA.

For individual non-standard high-capacity mobile hard disk, if
its impulse current is greater than or equal 1A, it may cause
TV-rebooting or self-locking. So the TV does not support it.

The USB port supports a voltage of 5V.

9

Remote Control

1

POWER: Switch the TV on or into standby

mode

1

3

4

6

7

9

11

14

15

18

20

2

2

INPUT: Select input sources

3

Number button: Direct channel selection or
numbers input

4

GUIDE: Display the Electronic Program Guide
(DTV mode)

5

Subtitle: Activate or deactivate the subtitle
mode

6

Special function buttons

5

7

Display the Quick setup menu

8

TXT: Turn on/off the teletext function

9

/ / < / >

8

menus and adjust the system settings to

: Allows you to navigate the OSD

your preference

10

OK: Confirm the selection in the OSD

menus

11

BACK: Return to previous menu

10

12

EXIT: Exit the menu

13

HOME: Enter the Smart

14

CH.List: Display the Channel List on the

12

screen

13

15

VOL + /-: Adjust the volume

16

CH + /-: Switch channel

16

17

MUTE: Mute or restore the TV sound

18

Playpad keys

17

19

NOTE: The information here will vary

depending on the remote control model

App: Quick access to the app

Audio Only: When you select this option,

19

the screen will not display the picture

20

NOTE: The information here will vary

depending on the remote control model

App: Quick access to the app
Media: Enter the media mode

.

.

NOTE:

The included remote control will vary depending
on model, country.　Check information according to the
actual remote control in the accessory bag.

10

Remote Control

1

POWER: Switch the TV on or into standby

mode

1

3

4

6

7

9

11

14

15

18

Info

2

2

INPUT: Select input sources

3

Number button: Direct channel selection or
numbers input

4

T.shift: Start Timeshift

5

Subtitle: Activate or deactivate the subtitle
mode

6

Special function buttons

7

Display the Quick setup menu

5

8

EPG: Display the Electronic Program Guide
(DTV mode)

9

/ / < / >

8

menus and adjust the system settings to

: Allows you to navigate the OSD

your preference

10

OK: Confirm the selection in the OSD

menus

11

BACK: Return to previous menu

10

12

EXIT: Exit the menu

13

HOME: Enter the Smart

14

Enter the Live TV screen

12

15

VOL + /-: Adjust the volume

13

16

CH + /-: Switch channel

17

MUTE: Mute or restore the TV sound

16

18

Playpad keys

19

Info: Display the present program information

17

20

NOTE: The information here will vary

depending on the remote control model

CH.List: Display the Channel List on the
screen

19

App: Quick access to the app

20

.

NOTE:

The included remote control will vary depending
on model, country.　Check information according to the
actual remote control in the accessory bag.

11

Remote Control

Installing Batteries in the Remote Control

1. Slide the back cover to open the battery compartment
of the remote control.

2. Insert two AAA size batteries. Make sure to match
the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment with the cover.

NOTES

Product image is only for reference, actual product may vary in appearance.

Handling the Batteries

Incorrect use of batteries may cause corrosion or battery leakage, which could
cause fire, personal injury or damage to property.

Only use the battery type indicated in this manual

Do not mix old and new batteries or different types of batteries .

Do not dispose of used batteries as domestic waste. Dispose of them in
accordance with local regulations.

Remote Control Operation Range

12

Turning the TV on for the First Time

Turning the TV on for the First Time

1. Connect the mains cable to the mains socket after you have completed all the
connections.

2. The first time you turn the TV on, it will go straight into the Installation Guide.

3. Press the [
Press the [OK] button to confirm.

/ / < / >

] buttons to navigate the menu and change the settings.

Language

Country

Time Zone

Wireless
Network

End User
License
Agreement

Finish Setup
Wizard

Select your desired language to be displayed on the menu.

Select the Country where you will operate the TV.

Select the local time zone according to your region.

If your TV does not automatically detect an Ethernet connection,
then use a wireless network, select your network from the list that
displays, also you can add a hidden network. When you’re done,
move to the next screen.

Your use of this device and all related services is governed by the
End User License Agreement and relative policies. Please review
these documents carefully and make sure that you have read
and agree to the provisions of the End User License Agreement.

Press "Start" to use your TV, for retailers press "Store Mode".

13

Specifications

Features, appearance and specifications are subject to change without notice.

Item

Dimension

(W × H × D)

Weight

Active Screen Size (Diagonal)

Screen resolution

Audio power

Operating mode power density

Power consumption when turned off

Power consumption in standby mode

Power consumption

Power supply

Receiving
systems

Wireless
LAN Module
specifications

Bluetooth
Module
specifications

Environmental conditions

HDMI Input

Without Stand

With Stand

Without Stand

With Stand

Analog

Digital

Model

Frequency

Range

Output Power
(Max.)

Model

Frequency

Range

Output Power
(Max.)

43" 50"

37.8 × 22.0 × 3.3 inches
(961 × 560 × 83 mm)

37.8 × 24.1 × 7.7 inches
(961 × 613 × 196 mm)

15.0 lbs (6.8 kg) 21.6 lbs (9.8 kg)

15.2 lbs (6.9 kg) 21.8 lbs (9.9 kg)

108 cm 126 cm

3840 × 2160 3840 × 2160

7W + 7W 8W + 8W

0.015 Watts/cm² 0.020 Watts/cm²

< 0.5 W < 0.5 W

0.5 W 0.5 W

Please refer to the rating label.

Please refer to the rating label.

PAL-D/K, B/G, I, SECAM-D/K, B/G

DVB-T/T2, DVB-C, DVB-S/S2

ZDGF7638GU-C WTA1M2500

2.4~2.4835GHz 2.4~2.4835GHz

2.4~2.4835GHz 17dBm 2.4~2.4835GHz 17dBm

ZDGF7638GU-C WTA1M2500

2.4~2.4835GHz 2.4~2.4835GHz

2.4~2.4835GHz, Class1,
6dBm

Temperature: 41°F - 95°F (5°C - 35°C)
Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa

RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)
YUV / 50Hz (576 I, 576 P, 720 P, 1080 I, 1080 P)
3840×2160 / 24Hz, 3840×2160 / 25Hz
3840×2160 / 30Hz, 3840×2160 / 50Hz,
3840×2160 / 60Hz

43.9 × 25.5 × 3.2 inches
(1116 × 648 × 82 mm)

43.9 × 27.9 × 8.9 inches
(1116 × 709 × 226 mm)

2.4~2.4835GHz, Class1,
6dBm

14

Specifications

Item

Dimension

(W × H × D)

Weight

Active Screen Size (Diagonal)

Screen resolution

Audio power

Operating mode power density

Power consumption when turned off

Power consumption in standby mode

Power consumption

Power supply

Receiving
systems

Wireless
LAN Module
specifications

Without Stand

With Stand

Without Stand

With Stand

Analog

Digital

Model

Frequency

Range

Output Power
(Max.)

55" 65"

48.4 × 28.0 × 3.4 inches
(1230 × 712 × 86 mm)

48.4 × 30.4 × 8.9 inches
(1230 × 773 × 226 mm)

27.1 lbs (12.3 kg) 36.8 lbs (16.7 kg)

27.8 lbs (12.6 kg) 37.5 lbs (17.0 kg)

139 cm 164 cm

3840 × 2160 3840 × 2160

8W + 8W 10W + 10W

0.016 Watts/cm² 0.014 Watts/cm²

< 0.5 W < 0.5 W

0.5 W 0.5 W

Please refer to the rating label.

Please refer to the rating label.

PAL-D/K, B/G, I, SECAM-D/K, B/G

DVB-T/T2, DVB-C, DVB-S/S2

WTA1M2500

2.4~2.4835GHz

2.4~2.4835GHz 17dBm

57.0 × 32.8 × 3.2 inches
(1448 × 834 × 81 mm)

57.0 × 35.2 × 11.4 inches
(1448 × 894 × 290 mm)

Model

Bluetooth
Module
specifications

Environmental conditions

HDMI Input

Frequency

Range

Output Power
(Max.)

WTA1M2500

2.4~2.4835GHz

2.4~2.4835GHz, Class1, 6dBm

Temperature: 41°F - 95°F (5°C - 35°C)
Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa

RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)
YUV / 50Hz (576 I, 576 P, 720 P, 1080 I, 1080 P)
3840×2160 / 24Hz, 3840×2160 / 25Hz
3840×2160 / 30Hz, 3840×2160 / 50Hz,
3840×2160 / 60Hz

15

Other Information

Recycling/Licenses

WEEE (Waste Electronic Electric Equipment)

European Directive 2012/19/EU

This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to
a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources
and ensure that it is recycled in a manner that protects human health
and the environment. For more information about where you can drop off

your waste equipment for recycling, please contact your local city ofce,

your household waste disposal service or the shop where you purchased the
product.

Batteries

In accordance with the Battery Directive, used batteries should not
be disposed of in the domestic waste. Dispose your batteries in the

collection containers specic for this purpose in retail stores.

ROHS (Restriction of Hazardous Substance)
European Directive 2011/65/EU

This European directive limits the use of dangerous and hazardous

substances which are difcult to recycle.

This allows recycling easily the EEE and contributes to the safeguard
of the environment.

Substances included in this product match to the RoHS directive.

The terms HDMI and HDMI High-Denition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio, Pro Logic, and the double-D symbol are trademarks of Dolby

Laboratories. Condential unpublished works. Copyright 1992-2019

Dolby Laboratories. All rights reserved.

For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, DTS and the
Symbol together, and DTS Studio Sound are registered trademarks
and/or trademarks of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights Reserved.

16