Hisense 46K360MN, 40K360MN Quick Setup Manual

K360 Series

CY-G

Barcode
35*10.5mm

BUTTONS AND CONNECTORS

5

When there is something wrong with your TV, you can try turning o the TV and restarting it. You can also refer to the following chart

for problem and solution tips.

• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.

• Attempt to power on unit using the power button on both the TV and the Remote.

• Check for the correct output connection on the external source and for the correct input connection on the TV.

• Make sure you have made the correct selection for the input mode for the incoming signal.

• Check the volume settings.

• Check if Mute mode is set "on" .

•

If black and white picture first unplug TV from AC outlet and replug after 60 seconds.

•

Check Color Setting if picture is black and white.

•

An electrical appliance may be affecting TV se t. Turn off any appliances, if interference goes
away, move appliance farther away from TV.

• I

nsert the power plug of the TV set into another power outlet.

•

Confirm that TV still has power and is operational.

•

Change the batteries in the remote control.

•

Check if the batteries are correctly installed.

•

Clean the front of the remote control (LED window).

•

If using a universal remote, be sure to select the TV mode on the remote.

•

If the remote still does not work:

-Remove and reinstall the batteries correctly to reset the remote or install new batteries.

-Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries
you will need to reprogram the remote for the other units.

•

Check if there is obstruction between the remote control and the TV.

TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at
this time, the camera should set on camera mode, not play mode). Observe the camera screen while
pressing a button on the remote control; you should see flashing light on the screen. If there is no light
observed, the remote control is not working. You need to repair or replace the remote control.

POSSIBLE SOLUTIONSSYMPTOMS

No sound or picture

Picture is normal, but no sound

Sound but no picture or black
and white picture.

Sound and picture distorted or
appear wavy.

•

If using an external antenna, check the direction, position and connection o f the antenna.

•

Adjust the direction of your antenna or reset or fine tune the channel.

Sound and picture is blurry or
cuts out momentarily.

•

After switching to Cable, please auto program the channels. The TV will “remember” all the channels then
the TV will allow you to surf the channels with [CH /V] buttons.

[CH /

I have connected an external
source to my TV and I get no
picture and/or sound.

HELP TOPICS9

TURNING THE TV ON FOR THE FIRST TIME8

Note:
If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned
on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.

REMOTE CONTROL

4

Wall-Mount hole pattern VESA (mm)

Wall-Mount screw size (mm)

2

Follow instructions provided with the Wall-Mount bracket.

• If you are not sure of your ability to do complete the installation, contact a

professional installer or service technician for assistance. The manufacturer is
not responsible for any damages or injuries that occur due to mishandling or
incorrect assembly.

• Be sure to use the provider spacers between the TV and the bracket when

attaching the mount.

ACCESSORIES LIST1

INSTALLING THE STAND2

Video Eect:

Connect an outdoor VHF/UHF antenna.

ANT

Menu Language Time Setting

Picture Mode TV Source

Connect Headphone for audio out of the TV.

HEADPHONE

AUDIO
OUT/

OR

OR

BEST (HDMI)

BETTER
(COMP)

GOOD
(AV)

HDMI / COMP / AV

Connect an HDMI cable or Comp/AV Adapter from an
external A/V equipment.

Connect an optical cable from an external digital
audio system.

DIGITAL AUDIO OUT

VGA & VGA AUDIO

Connect a VGA cable and an audio cable from the PC.

CHANGE THE BATTERIES

OR

Connect a USB device for browsing photos and movies.

USB

Mobile Hard Disk

VHF/UHF Antenna

Cable

ANT OUT

SPECIFICATIONS7

Align the front of the stand column
with the front of the base, then insert
the stand column into the base
making sure that the groove in the
stand column aligns with the ridge in
the base. Secure the stand column to
the base with 3 Screws A (M5 x 12) .

Secure the stand to the TV with the 4
Screws A (M5 x 12).

Align the stand cover with the stand
column, then secure the stand cover
to the stand column with 1 Screw A
(M5 x 12) . Make sure that the bottom
of the stand cover is flush against the
top of the stand column.

NOTES

Product image is only for reference, actual product
may vary in appearance. Carefully place your TV
facedown on a soft, cushioned surface to prevent
damage to the TV or scratching to the screen.

1. Slide the back cover to open the battery compartment of the remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with
the (+)and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment cover.

1

Gently push and slide2Insert the batteries3Gently push and slide

L

Y P

B

P

R

R

COMPONENT IN

VIDEO

AV IN

AUDIO

L

Y P

B

P

R

R

COMPONENT IN

VIDEO

AV IN

AUDIO

VGA

PC/DVI

AUDIO IN

PC IN

DIGITAL

AUDIO OUT

USB

DC 5V 0.5A(MAX)

Choose Your Menu Language

ENTER

Enter Select

MENU

Return

EXIT

Exit

English

Français

Set menu language to English,

Français, or Español

Choose Your Picture Mode

Home mode default settings are recommended for in-home
use. ENERGY STAR@ qualified.Retail mode is intended for
in-store display and resets video settings at Power On.

Home Mode

Retail Mode

Select Return

EXIT

MENU

Enter

ENTER

Exit

Reduces total power consumption

Choose Your TV Source

Antenna

Cable

Select Return

EXIT

MENU

Enter

ENTER

Exit

Select if using an antenna for standard or HD TV

Connect your TV’s power cord to a power outlet, then press
power. The initial setup screen opens. Press [

►/◄

] button to

select your language, press [ENTER] button to confirm.

Press [

►/◄

] to select your Picture Mode: Home Mode or
Retail Mode, press [ENTER] button to confirm.
If you select Retail Mode, a message appears “ Are you
sure you want retail mode?” Select “Yes” to continue, or
select “No” to change your selection.
For energy saving, we kindly suggest you select the Home
Mode.

Setting Time Zone:

Select the local time zone according to

your region.

Setting the Time: Press [▲/▲] to select the number you want
to set and press [

►/◄

] to set.

Press [▲/▼] to select your TV Source: Antenna or Cable,
press [ENTER] button to confirm.
If you press [EXIT] to exit the scanning, a message appears
“Please Run Channel Auto Scan”, you should scan channels
from the menu of Channels

Choose Your Time Setting

ENTER

Enter Select

MENU

Return

EXIT

Exit

If Automatic, options are automatically set by TV source

Mode

Time Zone
Daylight Savings
Year
Month
Day

Time

Auto

Off

2012

January

01

01:10 AM

TV CONNECTORS6

Check the jacks for position and type before making any connections. Loose
connections can result in image or color problems. Make sure that all connections are
tight and secure.

V

V] don’t work when I

V

set the Channel to Cable?
They work with the Air setting?

1

1. If you want to attach the TV to a wall-mount bracket (not provided), you
should first remove the stand if it is pre-attached. Make sure the TV is laid
face-down on a clean, safe, and cushioned surface.

If you want to attach the TV to a wall-mount bracket(not provided), you should

rst remove the stand if it is pre-attached .

INSTALLING A WALL-MOUNT BRACKET

3

Remote control does not work.

Follow the illustrations below to complete the installation steps.

2

Back View

Stand cover

Stand column

1

Ridge

Groove

3

User Manual

Quick Setup Guide

Remote Control

Screw A (M5 × 12) × 8

(M6 × 30) ×

4 (40K360MN)

(M6 × 45) ×

4 (46K360MN)

Spacer × 4

Batteries: AAA × 2

Screw B

200 × 200 (40”)

400 × 400 (46”)

M6

Español

Weight

LCD Panel Minimum size
(diagonal)
Screen resolution

40K360MN 46K360MN

Model Name

Dimension

Without Stand

Width: 36.29 inches (921.8 mm)
Height: 21.74 inches (552.3 mm)
Depth: 2.28 inches (57.9 mm)

Width: 36.29 inches (921.8 mm)
Height: 2.28 inches (57.9 mm)
Depth: 8.86 inches (225 mm)

Width: 41.63 inches (1057.3 mm)
Height: 24.74 inches (628.5 mm)
Depth: 2.4 inches (61 mm)

Width: 41.63 inches (1057.3 mm)
Height: 27.06 inches (687.5 mm)
Depth: 9.84 inches (250 mm)

25.4 lbs (11.5 kg)

28.7 lbs (13 kg)

34.2 lbs (15.5 kg)

38.8 lbs (17.6 kg)

40 inches 45.8 inches

1920 × 1080 1920 × 1080

Audio power

7 W + 7 W 8 W + 8 W

Power supply

Receiving
systems

120 V ~ 60 Hz

Receiving channels

Tuner type

Environmental conditions

VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125
Digital Terrestrial Broadcast (8VSB): 2 ~ 69
Digital cable (64/256 QAM): 1 ~ 135

NTSC

ATSC / QAM

Component Input

VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)

480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080P/60Hz

HDMI Input

RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080P)

Frequency synthesized

Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Humidity: 20% ~ 80% RH
Atmospheric pressure: 86 kPa ~ 106 kPa

With Stand

Analog
Digital

Without Stand

With Stand

To prevent internal damage to the TV and ensure the TV is mounted securely, use
only the 4 screws in the Screw B pack.

WARNING

Screw B

Bracket (1.5~2.5 mm)

Spacer × 4

Screws B

9.5~12.5 mm
Wall-mount Bracket

Screw

Spacerthe TV’s rear cover

Power on/off

Select HDMI source

Select component source

Display favorite list

Select input source

Infra-red transmitter

Select TV / AV / VGA / USB source

Adjust closed caption mode

Used when Roku Streaming

Stick connected

Zoom button

Media content control
function buttons
Used when Roku Streaming Stick
connected

Audio select button
Mono/Stereo/SAP operation

MENU button

Select sound mode

Select picture mode

Set the sleep timer

Go to the previous channel

Display the information banner
MUTE button
Next channel

Previous channel
Display the channel name

Direct channel selection

Dash button

Select a digital sub-channel

Media content

control function buttons

Move Up/Down/Left/Right

or adjust settings

Decrease volume

Increase volume

Close the menu

2. Attach purchased bracket (1.5~2.5 mm thickness) on the

TV with the 4 screws

in the Screw B pack.

MENU

Display the on-screen menu to setup your TV’s features.

INPUT

Select the different input signal sources.

Adjust the volume.

CH

/

VOL+/-

Select the channel.

(Power button)

Turn on the TV or put the TV in standby mode.

Caution:

The TV continues to receive power even in standby mode.

Unplug the power cord to disconnect power.

Item Description

ANT/CABLE Connect an antenna or cable TV to this jack.

HDMI

HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this TV and
any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V
receiver.

COMPONENT IN

Connect to a DVD player, Digital Set-Top-Box, or other A/V devices
with component (YP

B

PR) video and audio output jacks.

AV IN

Connect to the composite video and audio (L/R) output jacks on
external video devices.

VGA
PC/DVI AUDIO IN

Connect to a PC or other devices with a VGA or DVI interface.

/AUDIO OUT

Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).

DIGITAL AUDIO OUT

Connect an audio amplifier to this jack.

USB

Port for Digital Media Player and for software update.

HDMI 1/ARC

/AUDIO
OUT

DIGITAL

AUDIO OUT

USB

DC 5V 0.5A(MAX)

VIDEO

Y

PB

PR

L -AUDIO- R

COMPONENT IN

AV IN

ANT/CABLE

HDMI2/MHL HDMI3

PC/DVI

AUDIO IN

PC IN

VGA

AC power cord

MENU

INPUT

VOL+

CH

CH

VOL

-