Hiro H50334 User Manual

User Manual

Product Name: USB Wireless Adapter

Brand: HiRO

Model:H50334

01. Once the wireless USB adapter be plugged into an
USB port , put in the CD and find windows file “windows
(xp,vista,win7,win8,win10)” andSetup.exe.

02. Double click Setup.exe file, Software begin to
initialization,then click the “Next”.There shows the
installation progress.

04.Click Icon in the Windows system tray, which

locates in the bottom-right corner of your computer screen

or double click , and pops up a message and
click”Available Network” Double-click the utility icon or right
click the icon ,and the Wireless Network Connection
window appears then double click the SSID you preferred.

Manufacture: Hiro Inc.

Note：This Manual based on Windows7

Type the encryption key that you wrote down
earlier in both the Network key and Confirm
network key boxes, and then click “ok”.

1 2 3 4 5

Note:if there is no icon , please find it in the on right
buttom,it have been hide as following

03. Do not interrupt installation, Click “finish” to finish the
driver installation.The computer automatically restart.

pictures shows:
Wireless Connection2.

05. Click Icon which locates in the bottom-right
corner of your computer screen,click the wireless network
list and choose the SSID you preferred. and double click
(Or click “Connect”).

Wireless connection (two ways to realize
Wireless connection 1：

6 7 8 9 10

Type the encryption key and then click “ok”.

FCC Caution.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.

For 5150-5250 frequency band, add below statement for indoor use warning statement on manual,
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.