HiRO H50083 User Manual

H50003 / H50083

User’s Manual

1

Installation Guide

Installation Guide for Windows 2000, Windows XP Home / Professional, XP Professional x64 Edition, Vista 32

/ 64 Families, Windows 7 32 / 64 Families, and Windows Server 2003, 2008 R2 64-bit...................................... 3

System Requirements ..................................................................................................................................... 3

Modem Installation......................................................................................................................................... 3

Basic AT Command Guide ..................................................................................................................................... 8

Troubleshooting.................................................................................................................................................... 16

2

Installation Guide for Windows 2000,
Windows XP Home / Professional, XP
Professional x64 Edition, Vista 32 / 64
Families, Windows 7 32 / 64 Families, and
Windows Server 2003, 2008 R2 64-bit

System Requirements

 Computer with Pentium 200 MMX or higher processor.
 Windows 2000, Windows XP Home / Professional, XP Professional x64 Edition,

Vista 32 / 64 Families, Windows 7 32 / 64 Families, and Windows Server 2003,
2008 R2 64-bit

 20 MB Hard Disk free space or above
 Sound card for voice features
 1 available PCI slot.
 CD-ROM drive.

Modem Installation

1. Please turn off your computer and disconnect the power cable.

2. Please remove the cover from your computer. Please check your computer’s
manual for instructions and cautions regarding the removal of covers or installation
of add-in boards.

3. Please select an empty PCI slot and remove the appropriate expansion slot cover
from the computer.

4. Please insert the Internal 56k Modem into the PCI slot and secure with a screw in
the backplane.

5. Please replace the Computers cover.

6. Please insert one end of the telephone cord into the Modem’s Line (top) Socket.

7. Please connect the other end of the phone cord to a telephone phone point, via the
supplied adaptor (RJ11) if required.

8. Please turn on your computer.

3

For Windows 2000/XP/2003 User:

As Windows starts, it will detect a new hardware has been plugged or added,
and start the " Add New Hardware Wizard / Found New Hardware Wizard ".
Click on " Cancel ".

For Windows Vista/Win7/2008 User:

As Windows starts, the following will appear on screen.

9. Please insert the analog Modem communication CD into your CD-ROM drive.

10. Click " Run autorun.exe ". (For Windows Vista/2008/Win7 User only)

11. The CD should auto-start, displaying the following window. If it does not start, click

on Start – Run and type in CD:\autorun.exe (where CD is the drive letter of your
CD-ROM drive.

12. For Security reasons Windows 7/Vista requires the installer program to have

administrator privileges so the new policy called " User Account Control " has
been introduced in Windows 7/Vista. If UAC is enabled Windows pops up a
window " User Account Control " Windows need your permission to continue.
User needs to click " Yes / Allow / Continue " to proceed with the installation.

4

13. Please select " Install Driver ".

5