Warranty
Wireless Modules Dedicated to
LR8450-01 Memory HiLogger
Instruction Manual
EN
Warranty malfunctions occurring under conditions of normal
use in conformity with the Instruction Manual and Product
Precautionary Markings will be repaired free of charge. This
warranty is valid for a period of three (3) years from the date
of purchase. Please contact the distributor from which you
purchased the product for further information on warranty
provisions.
Safety notations
This manual classies seriousness of risks and hazard levels
as described below:
Indicates an imminently hazardous situation
DANGER
WARNING
CAUTION
NOTICE
that, if not avoided, will result in death of or
serious injury to the operator.
Indicates a potentially hazardous situation that,
if not avoided, will result in death of or serious
injury to the operator.
Indicates a potentially hazardous situation that,
if not avoided, could result in minor or moderate
injury to the operator.
Indicates potential risks of damage to the
supported product (or to other property).
Package Contents
LR8530 Wireless Voltage/Temp Unit
LR8531 Wireless Universal Unit
LR8532 Wireless Voltage/Temp Unit
LR8533 Wireless High Speed Voltage Unit
LR8534 Wireless Strain Unit
LR8535 Wireless CAN Unit
Z3230 Wireless LAN Adapter
Z1008 AC Adapter
(3-prong grounded-type power cord)
Mounting plate
Flat-head screw M3×4 mm
Connection conrmation label (LR8534 only)
Instruction Manual (this manual)
……………………………………………… 1
When Sending the Module for Repair
Detach the Z3230 Wireless LAN adapter from the wireless
module and pack both of them.
…………… Any one of them
…………………………… 1
…………………… 1
……………………………… 2
………… 1
………………………… 1
Model names
Six dierent types of wireless modules are available for the
LR8450-01.
LR8530 Wireless Voltage/Temp Unit
LR8531 Wireless Universal Unit
LR8532 Wireless Voltage/Temp Unit
LR8533 Wireless High Speed Voltage Unit
LR8534 Wireless Strain Unit
LR8535 Wireless CAN Unit
Introduction
Thank you for choosing the wireless module dedicated to
Hioki LR8450-01 Memory HiLogger. The wireless modules
can wirelessly communicate with the LR8450-01 by attaching
the Z3230 Wireless LAN Adapter. For more information, such
as operating precautions and specications, see the Quick
Start Manual and Instruction Manual (PDF) included with the
LR8450-01.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Wireless LAN
The LR8450-01 Memory HiLogger communicates with the
Z3230 Wireless LAN Adapter using radio waves within the
2.4 GHz frequency band. No radio station licenses are
required; however, make sure to note the following points:
DANGER
Do not use the product near any medical devices,
including a heart pacemaker.
Radio waves emitted from the product can cause
medical devices, such as a heart pacemaker, to
malfunctions, resulting in accidents.
WARNING
Do not use the product in the following
applications: medical use, nuclear power,
aerospace, those involving human lives such
as transportation, and those requiring high
reliability.
Hioki shall not be held liable for any accidents
resulting in injury or death or damage to the product
(or to other property) caused by use of the product in
such applications.
NOTICE
Do not use the LR8450-01 and its wireless
modules near other wireless communications
devices that use the 2.4 GHz frequency band.
Doing so may cause unstable communications or
aect the operation of other devices.
Install each wireless module (Z3230 Wireless LAN
Adapter) within a line-of-sight distance of 30 m
from the LR8450-01.
Keep clear of any obstacles, such as a wall and
metallic object, between the LR8450-01 and each
wireless module.
Failure to do so may cause unstable communications
or shorten a communication distance.
Mounting the Wireless Module
on a Wall
You will need:
Mounting screws M4×8 mm or longer
Mounting plate (accessory) ..............................................1
Flat-head screws M3×4 mm (accessory)
A Phillip’s head screwdriver (No. 2) ..................................1
Secure the mounting plate onto the rear of the
1
wireless module with two at-head screws
(M3×4
mm, accessory).
NOTICE
Use the M3×4 mm at-head screws only.
Using other screws can damage the wireless module
or cause the wireless module to detach from the
mounting plate.
..............................2
.........................2
Rear
Attaching the Z3230 to the
Wireless Module
Turn o the wireless module and disconnect the AC
1
Adapter.
Do not connect any input cables.
Attach the Z3230 Wireless LAN Adapter to the top
2
side of the wireless module.
Insert the Z3230 as far as it will go.
Tighten the captive screw of the Z3230.
3
NOTICE
Use the captive screw of the Z3230 only.
Using another screw can damage the wireless
module.
Secure the mounting plate on a wall with two M4
2
screws.
No mounting screws come with the wireless module.
Use commercially available screws.
Recommended screws: M4×8 mm or longer
Front
CAUTION
Properly secure the mounting plate on a solid
wall.
Failure to do so can cause the wireless module to
fall, causing an accident resulting in injury or death or
damage to the wireless module.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Loading...