Hioki IM7580A-1, IM7580A-2, IM7583-02, IM7585-01, IM7585-02 Communication Instruction Manual

EN

Communication Instruction Manual

IMPEDANCE ANALYZER

Sept. 2016 Revised edition 2
IM7585A987-02 16-09H

IM7581

IM7580A

IM7585

IM7583

IM7583-01
IM7583-02

IM7585-01
IM7585-02

IM7580A-1
IM7580A-2

IM7581-01
IM7581-02

IM7587

IM7587-01
IM7587-02

i

Contents

Introduction .............................................................................................................................1

Safety Information ..................................................................................................................1

1 Specications 3

1.1 RS-232CSpecications ................................................................................................3

Handshake (About Buffer Flow Control) ...............................................................................................3

1.2 GP-IBSpecications .....................................................................................................4

1.3 USBSpecications .......................................................................................................4

1.4 LANSpecications .......................................................................................................4

2 Connection and Setting 5

2.1 Overview of Communication ........................................................................................5

Screen Displayed while Setting Interfaces ........................................................................................... 6

2.2 USBSettingsandConnection .....................................................................................7

Setting USB ..........................................................................................................................................7

Connecting the USB Cable ................................................................................................................... 8

2.3 LANSettingsandConnection .....................................................................................9

LAN Settings .........................................................................................................................................9

Connecting a LAN Cable .................................................................................................................... 13

2.4 GP-IB Connection and Settings

(whentheZ3000isconnected) ..................................................................................14

Connecting the GP-IB Cable .............................................................................................................. 14

Setting GP-IB ......................................................................................................................................14

2.5 RS-232CConnectionandSettings

(whentheZ3001isconnected) ..................................................................................16

Connecting the RS-232C Cable ......................................................................................................... 16

Setting RS-232C .................................................................................................................................17

2.6 Remote Mode ...............................................................................................................18

Canceling Remote Mode .................................................................................................................... 18

Appendix A1

Appx.1 CheckingtheUSBVirtualCOMPort A1

IM7585A987-02

10

9

8

7

6

5

4

3

2

1

付録索引

Contents

ii

1

Introduction

Introduction

This instruction manual provides details on the communication interfaces of the IM7580A series, IM7581
series, IM7583 series, IM7585 series and IM7587 series Impedance Analyzer.
In this document, the “instrument” means the IM7580A series, IM7581 series, IM7583 series , IM7585
series and IM7587 series.

Safety Information

This manual contains information and warnings essential for safe operation of the instrument and for
maintaining it in safe operating condition. Before using it, be sure to carefully read the following safety
precautions.

Notation

In this manual

,

the risk seriousness and the hazard levels are classied as follows.

WARNING

Indicates a potentially hazardous situation that may result in death or serious
injury to the operator.

CAUTION

Indicates a potentially hazardous situation that may result in minor or moderate
injury to the operator or damage to the instrument or malfunction.

IMPORTANT

Indicates information related to the operation of the instrument or maintenance
tasks with which the operators must be fully familiar.

Indicates prohibited actions.

Indicates the action which must be performed.

*

Indicates the action which must be performed.

[ ]

Menus, commands, dialogs, buttons in a dialog, and other names on the screen
and the keys are indicated in brackets.

CURSOR

( Bold character)

Bold characters within the text indicate operating key labels.

Windows

Unless otherwise specied

,

“Windows” represents Windows Vista, Windows 7,

Windows 8 or Windows 10.

Dialogue Dialogue box represents a Windows dialog box.

Mouse Operation

Click: Press and quickly release the left button of the mouse.
Right-click: Press and quickly release the right button of the mouse.
Double click: Quickly click the left button of the mouse twice.

Drag:

While holding down the left button of the mouse, move the mouse and then release the
left button to deposit the chosen item in the desired position.

10

9

8

7

6

5

4

3

2

1

付録索引

2

Safety Information

3

1

Specications

1.1 RS-232C Specications

Transmission Method Communication method: Full duplex

Synchronous method: Start-stop synchronization

Transmission Speed 9600 bps, 19200 bps, 38400 bps, 57600 bps
Data Bits 8 bits
Parity None
Stop bit 1 bits
Message terminator (delimiter) CR+LF, CR
Flow control Software (XON/XOFF control)

“Handshake (About Buffer Flow Control)” (p. 3)

Electrical
Specications

Input voltage level

5 to 15 V ON

-15 to -5 V OFF

Output voltage level

5 to 9 V ON

-9 to -5 V OFF

Handshake (About Buffer Flow Control)

Control during Receiving

Input Buffer
Usage
Amount

85%

75%

25%

Buffer Space

Send XON

Send XOFF

XON/XOFF control:

• When the data in the receive buffer exceeds 75% of the
buffer, XOFF(13H) is sent and the controller is notied
that there is not much space remaining in the buffer.

• Processing of the data in the buffer continues, and then
XON(11H) is sent and the controller is notied that there

is sufcient remaining space in the buffer when the

amount of data becomes less than 25%.

Control during Sending

XON/XOFF control:

• When XOFF is received, the sending of data is halted. When XON is received, the sending of data is
resumed.

1

4

GP-IB Specications

1.2 GP-IB Specications

SH1 Supports all source handshake functions.

AH1 Supports all acceptor handshake functions.

T6 Supports standard talker functions.

Supports serial poll functions.
Talk only mode is not supported.
Supports the talker cancel function by MLA (My Listen Address).

L4 Supports standard listener functions.

Listener only mode is not supported.
Supports the listener cancel function by MTA (My Talk Address).

SR1 Supports all service request functions.
RL1 Supports all remote/local functions.
PP0 Parallel poll functions are not supported.
DC1 Supports all device clear functions.
DT1 Supports all device trigger functions.
C0 Controller functions are not supported.

Code used: ASCII code

1.3 USB Specications

Connector Series B receptacle
Compliance tandard USB2.0 (Full Speed/High Speed)
No. of ports 1
Class Communication class
Supported OS Windows Vista, Windows 7, Windows 8, Windows 10

1.4 LAN Specications

Connector RJ-45 connector × 1

Compliance
standard

IEEE 802.3-compliant Ethernet

Transfer system 10BASE-T/ 100BASE-TX/ 1000BASE-T Auto detected
Protocol TCP/IP
Function Command control