Page 1
ASSEMBLY INSTRUCTIONS
Make sure you check all contents carefully before discarding
packaging material as some parts may be encased in the packing
material.
·This Gazebo will need 2 or 3 people for assembly.
·The assembly process will take approximately 2 hours.
·We recommend a set of combination open end wrench set and screw driver set with
philip head,slot head, star head and vice grip will be helpful for the assembly of this item.
WARNING:
1.Always install the gazebo on level ground utilizing the ground stakes provided for stability.
2.Before attaching the canopy, make sure ALL BOLTS are tightened securely.
3.During assembly keep children away from the work area and the parts and tools.
4.Keep all flame and heat sources away from this gazebo/canopy/tent/fabric.
CAUTION:
This product can not withstand winds or heavy rain. To avoid injury or damage, we recommend that when high winds or heavy rain is forecasted ,please remove the roof until the storm
has end.
Gazebo Cleaning & Storage:
·Canopy ·Wash with mild liquid soap. Using a sponge. Scrub fabric gently.
·Rinse with water until all soap is removed.
·Drip-dry gazebo in an open position.
·Frame ·Wipe clean with damp cloth.
·Use mild soap to wash frame.
·If gazebo is equipped with caps remove caps and drain all remaining water.
·Dry frame with cloth.
·One year warranty.
Page 2
ITEM DESCRIPTION QTY ILLUSTRATION
A
B
C
D
E
F
LONG CROSS BAR
SHORT CROSS BAR
ROOF CORNER
SUPPORT
ROOF CORNER
SUPPORT
LEG
LEG
2PCS
2PCS
2PCS
2PCS
4PCS
2PCS
ITEM DESCRIPTION QTYILLUSTRATION ITEM DESCRIPTION QTYILLUSTRATION
G
K
ROOF CORNER
CONNECTOR
I
SMALL CANOPY
GROUND SPIKE 8PCS
M
O
Q
BOLT
NUT
M6*20
1PCS
1PCS
24PCS
10PCS
8PCS WRENCH
H
SHELF SUPPORT
J
BIG CANOPY
L
N
P
BRACKET
R
BOLT
BOLT
SHELF
4PCS
1PCS
10PCS
M6*10
6PCS
M6*25
6PCS
2PCS
Page 3
BBQ Gazebo Assembly Instruction
STEP 1:
Attach 4PC bracket (P) to the 4PC legs (A&B) with 4PC bolt (L) , do not tighten the bolt
until STEP 5.
DO NOT TIGHTEN
THE BOLT
TEMPORARILY
STEP 2:
Attach 2PC bracket (P) to the 2PC long cross bar (C) with 2PC bolt (L).
Page 4
STEP 3:
Attach 2PC long cross bar (C) and 2PC short cross bar (D) to the 4 legs with 16PC bolt (M) .
Please make sure holes of the legs face each other as shown in the picture.
STEP 4:
Connect 4PC Roof Corner Support (E) and Roof Corner Connector (G) long tube.
Connect 2PC Roof Corner Support (F) and Roof Corner Connector (G) short tube.
Page 5
STEP 5:
Attach Roof Corner Support (E&F) to bracket (P) , and fix it with bolt (N) and nut (O) .
STEP 6: Attach shelf support (H) to the legs (A&B) with bolt (L) . Then attach shelf (R) to the legs (A&B)
and shelf support (H) , fix by using bolt (M) and nut (O). Repeat the above step for another
shelf.
Page 6
STEP 7:
Pull the corner of Roof Cover (I) , and insert Roof Corner Support (E) to this corner.
Then pull the corner of Roof Cover (J) , and insert roof corner support (E&F) to this
corner. Then secure the gazebo with the ground spike (K) .
Any questions, assembly or accessories, please contact:
customerservice@e2e-corp.com
Loading...