Page 1
Assembly Instructions
Caution: Please read this before you proceed with assembly.
Read all instructions before assembling and using this product
1. Select ideal location. Set out all parts on a clear and level surface prior to assembiy. Ideally,
the Gazebo should be set up in the desired location to avoid moving it after assembly.
2.Team Work. We recommend 3 adults and it may require 1 hours to fully assemble the Gazebo.
If possible, please use safety ladders.
3. Use caution during the entire assembly process, especially when lifting large and heavy items.
Also, use all safety precautions when using ladders. Keep children away from the assembly area.
4. Check all available parts. Before assembling the gazebo, check to make sure you have all the
parts listed in the Parts List.
5. Important! Before attaching the canopy, make sure ALL BOLTS are tightened securely.
6. During assembly keep children away from the work area and the parts and tools. Once
assembled, do not allow children to climb on the gazebo.
7. It is recommended that the Canopy, Sidewalls and Mosquito Netting be removed during strong
winds and stormy conditions.
8. Do not set this gazebo up near electric lines, trees or slanted roofs. Use safety precaustions
at all times.
Any questions on assembly or parts, please contact: customerservice@e2e-corp.com
Page 2
ITEM
QTY.DESCRIPTION ILLUSTRATION
A
B
C
D
E
F
Center
Connector
Long Left Lintel
Long Right Lintel
Short Left Lintel
Short Right Lintel
Post
1
2
2
2
2
4
K
G
H
J
L
Long Top
Bar Tube
Long Support
Connecting Tube
Short Top
I
Bar Tube
Short Top
Bar Tube
Small Top
Bar Tube
Small Center
Connector
4
4
2
2
4
1
M
Long Screen
Rod
4
-2-
Page 3
ITEM
QTY.DESCRIPTION ILLUSTRATION
N
O
P
Q
R
S
T
Short Screen
Rod
U-Shaped
Connector
U-Shaped
Connector
Small Canopy
Big Canopy
Screens
Bolt \Flat Washer\
Nut M6*15mm
4
4
4
1
1
4
20
U
V
V1
W
W1
X
Y
Bolt \Flat Washer
M6*15mm
Bolt \Flat Washer
M6*30mm
Bolt \Flat Washer
M6*28mm
Allen Wrench
Wrench
Stake
Hanging Loops
8
8
24
1
1
12
44
Z
Z1
Decoration
Accessory
Hook
1
1
-3-
Page 4
1
T
O
F
F
Fix U-Shaped Part (O) on post (F) with screw (T) ;
2
C
E
B
B
C
U
D
D
E
U
Connect the Long Left Lintel (B) and the Long Right Lintel (C) with the bolt (U).
Connect the Short Left Lintel (D) and the Short Right Lintel (E) with the bolt (U).
-4-
Page 5
5
B
3
V1
E
N
V1
E
C
P
B
V1
N
D
M
V1
M
C
N
E
D
V1
C
P
D
M
V1
B
Fix the U-Shaped Connector (P),the Long Screen Rod (M) with the Long Lintels (C/B) by using the
Bolt (V1).
Fix the U-Shaped Connector (P),the Short Screen Rod (N) with the Short Lintels(E/D) by using the
Bolt (V1).
4
B
T
B
C
D
E
E
D
C
B
F
E
T
F
F
Fix lintels (B/E) with Post (F) use screw (T) ,
F
Repeat the above step for the other three posts ;
F
Page 6
5
-6-
G
H
H
Insert Long Support Connecting Tube (H) into Long Bar Tube (G) ;
G
6
G
I
G
G
I
J
G
G
J
I
V
P
G
O
H
V
I
Insert Long Top Bar Tube (G) and Short Top Bar Tube (I/J) into Center Connector
(A) ,Fix Short Bart Tube (I) on U-shaped Connector (P) with screw (V) ,
Fix Long Support Connecting Tube (H) with U-Shaped Connector (O) with Screw
(V) ;
Page 7
Put each small top beam (K) loosely om each long top connector pole (G) first, then insert
7
A
Q
K
L
Insert each small top bar (K) into the small center connector (L). Attach the
small roof (Q) on the small top bar (K), then secure with the decoration ball (A);
K
K
K
Q
Q
8
K
G
R
Place the fabric cover (R) loosely on top of the assembly. Insert each small top beam (K) into
the long top connector pole (G).
together, otherwise the last one won't insert correctly.
-7-
Page 8
9
Any questions on assembly or parts, please contact: customerservice@e2e-corp.com
R
I/J
H
R
Tighten the fabric cover (R) by pulling over the four small connector poles as shown.
10
M/N
Y
S
F
X
Hanging Screen (S) on Screen Rod (M/N) with Hanging Loops (Y) , Fix the Stake
(X) with Post (F) firmly .
-8-
Loading...