hinor i5 line, i8 line User Manual

MANUAL DE INSTRUÇÕES

COD: 18.495

www.hinor.com.br

e-mail: [e-mail]

Toll-free

0800-478002

WARRANTY

This warranty has a term of two (2) years from the manufacturing date or one (1) year from the date of the

dealer's invoice, whichever expires first. It covers manufacturing defects that may arise during this period.

When verifying some manufacturing defect, you should take the product along with its purchasing
invoice to the store where you bought it, so that, after the dealer's analysis, your product can be either
repaired or replaced free of cost, except for any other freight expenses to the dealer store.

We do not accept complaints within the warranty term if:

a) The product has been installed without observing the INSTALLATION INSTRUCTIONS provided in
this manual;

b) The loudspeaker presents defect like torn, perforated or wet cone; installation in improper place;
distorted or smashed basket; moving coil burned due to use out of the specifications;

c) After being inspected, the product shows evidences of modifications or repairs made by unauthorized
personnel;

d) There is evidence that chemicals were used on the loudspeaker components;

e) The loudspeaker has been burned due to the use of amplifiers (power modules) not having protective
under-voltage (Battery voltage drop) circuit.

This warranty applies only to the first purchaser so that there is no conflict with the current law.

Should HINOR decide to modify the design and/or to make technical improvements on this product, it
shall not be obliged to include such changes in any product manufactured before.

The warranty offered herein covers only the repair or replacement of the product, and HINOR does not
take responsibility for any claim for indemnification of any kind.

NH INDÚSTRIA E COMÉRCIO LTDA

ROD. BR 470, km140, 5640 - VALADA

89.160-000 RIO DO SUL (SC) - BRAZIL - PHONE: [phone]
CNPJ 85776466/0001-36 - I.E.250170515

INDÚSTRIA BRASILEIRA - MADE IN BRAZIL

ITOUPAVA

INSTRUCTION MANUAL

This range of loudspeakers has been developed to reproduce low frequencies with high sound
pressure free of distortion. These are essential features when the reproduction of bass and
sub-bass frequencies is required.

Ferrite

Basket

Cone

Dust cap

Edge

Centering

Trim

Features

Details

Features Performance Graphs

The frequency response expresses the sensibility curve of the loudspeaker in all of its audible
frequency. The data shown on the following graphs was obtained in an anechoic chamber with
the help of imported dedicated software and hardware.

Frequency response

02 07

High power

- 4-inch coil with imported Copper Cladded wire y Till-sheet body;

- Vented pole and cone ring to better cool the coil;

- Bracing Neck;

- Metallic rope with silver alloy and silicone coating for higher resistance and electric
conductibility;

Optimized magnetic assembly

- Magnetic assembly optimized by means of MEF (Finite Element Method) software, providing
the moving assembly with high linearity;

- Barium ferrite of diameter 220mm and 25 mm of thickness;

- Large baskets with 210 mm of outer diameter

High linearity

- Impregnated and compacted fabrics to provide for a highly stiff centering;

- Optimized magnetic assembly with extended pole capable of assuring an even magnetic field;

- Fabric suspension capable of better responses in sub-bass and bass frequencies;

Sturdy design

- Zinc-plated Basket and poles in order to prevent oxidation;

- Polished and vanished casing ring;

- Highly stiff cast aluminum basket;

- Reflective adhesive tape;

- White color Wave Sound sewing.