Hinkley Lighting FR49435RCO User Manual

Page 1
PROSECCO
FR49435RCO
Bulbs: 60W CAND. G 16½ Replacement Parts: SHADE: R49433SH CRYSTALS: R49430CRY-B1,
R49430CRY-b2, R49430CRY-C2, R49430CRY-C4
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first spreading the arms to there proper position, assembling main fixture assembly, installing mounting hardware to junction box, making all necessary electrical connections, hanging the fixture and then installing the fixture shade and crystals.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
STEP 1
1 To assemble main body, slip center tube (b) along wire and thread into nipple (c) located at the top of the main body assembly (a) - See Drawing 2.
2 Slip outer tubing (d) over center tube (b) followed by cap (e).
3 Slip loop (f) along wire and thread onto top of center tube (b) and tighten.
4 Rotate arms (k) until they are approximately 72 degrees apart
- See Drawing 1.
STEP 2 Refer to Hanging Instruction Sheet [FRIS19] to hang fixture. Then refer
back to this sheet to continue installation of this fixture.
STEP 3
1 To install shade, remove socket ring (1) from socket (2)- See Drawing 2.
2 Slip shade (3) over socket (2) and hold in position.
3 Thread socket ring (1) onto socket (2) and hand-tighten to secure shade.
4 Fixture can now be lamped accordingly.
[DRAWING 1]
72°
k
k
k
k
k
[DRAWING 2]
f e
g
1
d
3
b c
a
j
h
2
i
STEP 4
This Prosecco semi-flush uses 4 sizes of crystal pendalogues.
1 Working from the top of the fixture down, attach medium crystal pendalogues (2) to eyelets (g) - See Drawing 2.
2 Attach large crystal pendalogues (3) to eyelets (h)
3 Attach small crystal pendalogues (1) to eyelets (i).
3 Attach extra large crystal pendalogue (4) to eyelet (j).
crystal 1
R49430CRY-B1
crystal 2
R49430CRY-b2
crystal 3
R49430CRY-C2
.
crystal 4
R49430CRY-C4
k
800.421.3517 WWW.FREDRICKRAMOND.COM
1.26.09
Loading...