Hinkley Lighting FR44502BBZ User Manual

BENTLEY

FR 44 50 2B Bz

Bulbs: 60 W C AND. Replacement Parts: SHADE : R 44500 SH CRYST AL: R44500C RY

A S S E M BLY INSTRU C T I ONS

Assembly of this fixture will be accomplished by first installing the mounting strap to

the junction box, making all necessary electrical connections, mounting the fixture to

the wall attaching the crystals, installing the candle sleeve and then attaching the shade.

[DRAWING 1]

a

j

b

f

SA FE TY WA RN ING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.

S T E P 1

1 Prepare mounting strap (a) by threading nipple into the center hole of

the mounting strap (a), approximately 1/4“- see Drawing 2.

2 Attach mounting strap (a) to junction box (j) using two screws (b) provided.

S T E P 2 Make electrical connections from supply wire to fixture lead wires.

Refer to instruction sheet (I.S. 18) and follow all instructions to make all necessary
wiring connections. Then refer back to this sheet to continue installation of this fixture.

S T E P 3

1 To mount backplate to wall, slip center hole of backplate (e) over nipple (c) and

hold fixture in position - see Drawing 2.

Slip spider assembly (f) over nipple (c) and hold in position.

2

Thread decorative knob (d) onto end of nipple (c) and tighten to secure fixture.3

S T E P 4

1 Slip candle sleeve (1) over socket (2) - see Drawing 2.

2 Slip shade cup (3) onto top of candle sleeve (2).

3 Thread tail (4) onto bottom of arm assembly (5).

4 Attach crystal pendalogues (6) to end of arms (7).

5

Fixture can now be lamped accordingly.

crystal 6

R44500CRY

c

e

d

[DRAWING 2]

3

1

2

5

4

6

7

8 00 .42 1. 35 17 WW W.F RE DR IC KR AMON D.C OM

01.01.11