
Bulbs: 60W CAND.
BARCELONA
FR44110
AS S EMB LY INS T R U CTION S
Assembly of this fixture will be accomplished by first installing the mounting strap to
the junction box, making all necessary electrical connections, mounting the fixture to
the wall and then hanging the fixture crystals.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1 Prepare mounting strap (a) by threading mounting screws (b) into the back of
the mounting strap (a), making sure the holes into which the screws are threaded
match the spacing of holes (d) in the backplate (e) - See Drawing 1.
2 Attach mounting strap (a) to junction box (j) using two longest mounting
screws (c).
3 Make electrical connections from supply wire to fixture lead wires. Refer to
instruction sheet [FRIS18] and follow all instructions to make all necessary
wiring connections. Then refer back to this sheet to continue installation of
this fixture.
4 To mount fixture, slip the two mounting screws (b) through the two mounting
holes (d) in the backplate (e).
5 While holding fixture in place, thread the two ball knobs (f) on to the end of the
mounting screws (b), and tighten.
STEP 2
1 To install glass, remove socket ring (1) from socket (3) - See Drawing 2
2 Slip small alabaster bowl (2) over socket (3).
3 Thread socket ring (1) onto socket (3) to secure glass (2).
[DRAWING 1]
j
1
2
3
a c e
b
[DRAWING 2]
f
d
STEP 3 Refer to Crystal Installation Sheet provided to install crystals.
09.12.08

BARCELONA
FR44110
Bulbs: 60W CAND. Replacement Par ts:
CRYSTAL INSTALLATION INSTRUCTIONS
This Barcelona chandelier use 2 sizes of crystals pendalogues.
STEP 1
1 Starting at the top of the fixture and working your way down, attach small pear shaped crystal (1) to eyelet (a).
2 Attach medium size pear shape crystal (2) to eyelet (b).
3 Repeat steps 1-2 for remaining arms.
crystal 1
b
b
b
eyelet
crystal 2crystal 2
b
a
a
b
bb
09.12.08