Hinkley Lighting FR43754SLF User Manual
CASPIA
FR43754SLF
Bulbs: 60W C AND. REPLACMENT PARTS: R43754CRY; R43754STR-A, R43754STR-B
ASSEMBLY INSTRU C T IONS
Assembly of this fixture will be accomplished by first assembling the main fixture
body, installing mounting hardware to junction box, mounting the fixture to the ceiling,
and then mounting the crystals to the fixture.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
ST E P 1
To assemble fixture first slip center column (2) along wire and thread into top of main
1
body (1) - see Drawing 1.
2
Now slip loop (3) along wire and thread onto top of center column (2).
3
Take threaded tube (7) and slip parts cap (6), check ring (5), and tube (4) in that
order. Now thread tube (7) into coupler (a) at bottom of main body (1). Thighten hex
nut (8) against cap (6) to secure parts.
4
Fixture can now be hung from the ceiling please follow instruction sheet FRIS-19
provided. After installation return to this section for crystal installation instructions.
ST E P 2
To attach bottom chrystals slip cap (9) with crystals (10) attached onto threaded tube
1
(7) and thread hex nut (11) onto threaded tube (7) and tighten to secure cap (9) and
crystals (10) - see Drawing 1.
[DRAWING 1]
3
f
13
2
e
d
c
1
a
5
4
6
7
8
b
10
9
2
Thread finial (12) onto the end of threaded tube (7).
3
Fiture can be lamped at this time.
4
Start with one strand of crystals (1o) and working around the ring (d) attach hook (b) on
crystal strand into loop (c) hanging below ring (d).
5
To attach long strands hook bottom of strand (13) to loops (e) located inside of ring (d),
then hook other end (f) to loop located at top of center column (2).
Fixture is now complete.
6
11
12
800.42 1. 35 17 W WW. FR EDRI CKRA MOND. CO M
6.01.11
Loading...