
CASPIA
FR43751SLF
Bulbs: 60W C AND. REPLACMENT PARTS: R43753CRY; R43751STR-A
ASSEMBLY INSTRU C T IONS
Assembly of this fixture will be accomplished by first assembling the main fixture
body, installing mounting hardware to junction box, mounting the fixture to the ceiling,
and then mounting the crystals to the fixture.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
ST E P 1
1
To assembly main body, slip parts (4), (3), and (2) in that order onto threaded tube
(5).
Thread tube (5) into coupler (a) in center of main body assembly (1).
2
Tighten hex nut (b) to secure parts to body. Fixture can now be mounted to ceilin
3
g.
ST E P 2
1 Prepare mounting strap (a) by threading the two long mounting screws (b)
into the back of the mounting strap (a), making sure the holes into which the
screws are threaded match the spacing of holes (d) in the canopy (e) - See
Drawing 2.
2 Attach mounting strap (a) to junction box (j) using two screws (c).
3 Make electrical connections from supply wire to fixture lead wires. Refer to
instruction sheet [FRIS18] and follow all instructions to make all necessary
wiring connections. Then refer back to this sheet to continue installation of
this fixture.
4 To mount fixture, slip the two mounting screws (b) through the two mounting
holes (d) in the canopy (e).
5 While holding fixture in place, thread the two ball knobs (f) on to the end of the
mounting screws (b), and tighten.
.
[DRAWING 1]
a
b
6
7
[DRAWING 2]
1
d
e
2
3
4
5
8
c
9
j
ST E P 3
1
To attach crystal strands (9), lift body (6) with crystals and slip onto threaded
tube (5) and thread on hex nut (7) to secure to bottom of fixture -
2
Thread bottom finial (8) onto end of threaded tube (5) and tighten.
Fixture can now be lamped accordingly.
3
Now starting at one end, Take hook (c) and hook it to the loop (d) on the bottom
4
of half ring (e).
5
Fixture is now complete.
b
a
see Drawing 1.
c
e
d
f
800.42 1. 35 17 W WW. FR EDRI CKRA MOND. CO M
6.01.11